| #include "rt3883.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "trendnet,tew-692gr", "ralink,rt3883-soc"; |
| model = "TRENDnet TEW-692GR"; |
| |
| aliases { |
| led-boot = &led_wps_green; |
| led-failsafe = &led_wps_green; |
| led-running = &led_wps_green; |
| led-upgrade = &led_wps_green; |
| }; |
| |
| flash@1c000000 { |
| compatible = "cfi-flash"; |
| reg = <0x1c000000 0x800000>; |
| bank-width = <2>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| reg = <0x0 0x0030000>; |
| label = "u-boot"; |
| read-only; |
| }; |
| |
| partition@30000 { |
| reg = <0x00030000 0x00010000>; |
| label = "u-boot-env"; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| reg = <0x00040000 0x00010000>; |
| label = "factory"; |
| read-only; |
| }; |
| |
| partition@50000 { |
| compatible = "denx,uimage"; |
| reg = <0x00050000 0x007b0000>; |
| label = "firmware"; |
| }; |
| }; |
| }; |
| |
| keys { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <100>; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| |
| wps { |
| label = "wps"; |
| gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| wps { |
| label = "orange:wps"; |
| gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led_wps_green: wps2 { |
| label = "green:wps"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &state_default { |
| gpio { |
| groups = "spi", "i2c", "jtag", "uartf"; |
| function = "gpio"; |
| }; |
| }; |
| |
| ðernet { |
| status = "okay"; |
| mtd-mac-address = <&factory 0x4>; |
| |
| port@0 { |
| phy-handle = <&phy0>; |
| phy-mode = "rgmii"; |
| }; |
| |
| mdio-bus { |
| status = "okay"; |
| |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| phy-mode = "rgmii"; |
| |
| qca,ar8327-initvals = < |
| 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ |
| 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ |
| 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */ |
| 0x50 0xc437c437 /* LED Control Register 0 */ |
| 0x54 0xc337c337 /* LED Control Register 1 */ |
| 0x58 0x00000000 /* LED Control Register 2 */ |
| 0x5c 0x03ffff00 /* LED Control Register 3 */ |
| 0x7c 0x0000007e /* PORT0_STATUS */ |
| 0x94 0x0000007e /* PORT6 STATUS */ |
| >; |
| }; |
| }; |
| }; |
| |
| &pci { |
| status = "okay"; |
| }; |
| |
| &pci1 { |
| status = "okay"; |
| |
| wifi@0,0 { |
| compatible = "pci0,0"; |
| reg = < 0x10000 0 0 0 0 >; |
| ralink,2ghz = <0>; |
| }; |
| }; |
| |
| &wmac { |
| status = "okay"; |
| ralink,mtd-eeprom = <&factory 0x0>; |
| ralink,5ghz = <0>; |
| mtd-mac-address = <&factory 0x4>; |
| mtd-mac-address-increment = <3>; |
| }; |