[Feature][T108][task-view-1499] change gsw .h file
Only Configure: No
Affected branch: GSW_V1453
Affected module: libgsw
Is it affected on IC: only ASR
Self-test: yes
Doc Update: no
Change-Id: I678871907e2be939e6673ee09bfed88992013348
diff --git a/mbtk/include/gsw/gsw_hwpin_interface.h b/mbtk/include/gsw/gsw_hwpin_interface.h
new file mode 100644
index 0000000..cfceb4b
--- /dev/null
+++ b/mbtk/include/gsw/gsw_hwpin_interface.h
@@ -0,0 +1,184 @@
+/**
+* @file : gsw_hwpin_interface.h
+* @brief : Gpio and mcu ctrl
+* @date : 2022-07-05
+* @author : Wind
+* @version : v1.0
+* @copyright Copyright(C) 2022,Geely
+*/
+#ifndef __GSW_HW_PIN_INTERFACE__H__
+#define __GSW_HW_PIN_INTERFACE__H__
+#include "gsw_hal_errcode.h"
+#include <stdbool.h>
+
+#define GSW_HAL_USB_SUCCESS (0x0001)
+
+/**
+ * @brief hardware reset mcu only
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_mcu_reset(void);
+
+/**
+ * @brief hold mcu boot pin then reset to bootmode
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_mcu_enter_bootmode(void);
+
+/**
+ * @brief release mcu boot pin then reset to normalMode
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_mcu_exit_bootmode(void);
+
+/**
+ * @brief hardware reset soc and mcu
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_tcam_reset(void);
+
+/**
+ * @brief keep soc power
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_soc_power_keep(void);
+
+/**
+ * @brief release soc power
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_soc_power_release(void);
+
+/**
+ * @brief wakeup mcu through gpio
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_soc_wakeup_mcu(void);
+
+/**
+ * @brief soc wakeup mcu gpio output low
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_soc_wakeup_mcu_gpio_set_low(void);
+
+/**
+ * @brief get usb is connected or not
+ * @param
+ * @retval 1: connected
+ * @retval 0: disconnected
+ * @retval other: failed
+ */
+int gsw_hwpin_is_usb_connected(void);
+
+/**
+ * @brief set red led ON
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_led_red_on(void);
+
+/**
+ * @brief set red led OFF
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_led_red_off(void);
+
+/**
+ * @brief set red led blink
+ * @param [in] delay_on: on time ms
+ * @param [in] delay_off: off time ms
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_led_red_blink(int delay_on, int delay_off);
+
+/**
+ * @brief set green led ON
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_led_green_on(void);
+
+/**
+ * @brief set green led OFF
+ * @param
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_led_green_off(void);
+
+/**
+ * @brief set green led blink
+ * @param [in] delay_on: on time ms
+ * @param [in] delay_off: off time ms
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_led_green_blink(int delay_on, int delay_off);
+
+/**
+ * @brief Get health status of EMMC.
+ * @param [out] written_mbytes: Mega-Bytes have been written.
+ * @param [out] health: value of EMMC health.
+ * @retval 0: success
+ * @retval other: fail
+*/
+int gsw_hwpin_get_emmc_health(int* written_mbytes, int* health);
+
+/**
+ * @brief Get readonly status of EMMC.
+ * @param
+ * @retval true: readonly happened; false: normal
+ * @retval other: fail
+*/
+bool gsw_hwpin_check_emmc_readonly(void);
+
+/**
+ * @brief factory test control led
+ * @param [in] aging_flag: ture/false
+ * @param [in] delay_on: on time ms
+ * @param [in] delay_off: off time ms
+ * @retval 0: success
+ * @retval other: fail
+ */
+int gsw_hwpin_factorytest_ctrl_led(bool aging_flag, int delay_on, int delay_off);
+
+/**
+ * @brief MUTE test.
+ * @param [in] value: TRUE or FALSE.
+ * @retval 0: success
+ * @retval other: fail
+*/
+int gsw_hwpin_mute_test(int value);
+
+/**
+ * @brief fstrim emmc.
+ * @param [in] emmc_path: example "/media"
+ * @retval 0: success
+ * @retval other: fail
+*/
+
+int gsw_hwpin_fstrim_emmc(const char *emmc_path);
+
+
+#endif