Add basic change for v1453

Change-Id: I9497a61bbc3717f66413794a4e7dee0347c0bc33
diff --git a/mbtk/test/others/polarssl_demo.c b/mbtk/test/others/polarssl_demo.c
new file mode 100755
index 0000000..1405fdb
--- /dev/null
+++ b/mbtk/test/others/polarssl_demo.c
@@ -0,0 +1,488 @@
+#include <stdio.h>
+
+#ifdef MBTK_POLARSSL_SUPPORT
+#include "mbtk_log.h"
+#include "ql/ql_mcm_sim.h"
+#include <sys/socket.h>
+#include <polarssl/net.h>
+#include <polarssl/ssl.h>
+#include <polarssl/entropy.h>
+#include <polarssl/ctr_drbg.h>
+#include <polarssl/certs.h>
+#include <polarssl/x509.h>
+#include <polarssl/error.h>
+#include <polarssl/debug.h>
+#include <polarssl/config.h>
+
+#define DFL_SERVER_NAME         "asr"
+#define DFL_SERVER_ADDR         NULL
+#define DFL_SERVER_PORT         4433
+#define DFL_REQUEST_PAGE        "/"
+#define DFL_REQUEST_SIZE        -1
+#define DFL_DEBUG_LEVEL         0
+#define DFL_NBIO                0
+#define DFL_CA_FILE             "/ca.crt"
+#define DFL_CA_PATH             "/ca.crt"
+#define DFL_CRT_FILE            "/client.crt"
+#define DFL_KEY_FILE            "/client.key"
+#define DFL_PSK                 ""
+#define DFL_PSK_IDENTITY        "Client_identity"
+#define DFL_FORCE_CIPHER        0
+#define DFL_RENEGOTIATION       SSL_RENEGOTIATION_DISABLED
+#define DFL_ALLOW_LEGACY        SSL_LEGACY_NO_RENEGOTIATION
+#define DFL_RENEGOTIATE         0
+#define DFL_EXCHANGES           1
+#define DFL_MIN_VERSION         SSL_MINOR_VERSION_3
+#define DFL_MAX_VERSION         SSL_MINOR_VERSION_3
+#define DFL_AUTH_MODE           SSL_VERIFY_REQUIRED
+#define DFL_MFL_CODE            SSL_MAX_FRAG_LEN_NONE
+#define DFL_TRUNC_HMAC          0
+#define DFL_RECONNECT           0
+#define DFL_RECO_DELAY          0
+#define DFL_TICKETS             SSL_SESSION_TICKETS_ENABLED
+#define DFL_ALPN_STRING         NULL
+
+#define GET_REQUEST "GET %s HTTP/1.0\r\nExtra-header: "
+#define GET_REQUEST_END "\r\n\r\n"
+
+#define  CA_CERT \
+"-----BEGIN CERTIFICATE-----\r\n" \
+"MIIDKjCCAhICCQCOewfZiRCiNjANBgkqhkiG9w0BAQUFADBXMQswCQYDVQQGEwJD\r\n" \
+"TjEQMA4GA1UECBMHU2lDaHVhbjEVMBMGA1UEChMMTU9CSUxFVEVLLkNBMQswCQYD\r\n" \
+"VQQLEwJJVDESMBAGA1UEAxMJTU9CSUxFVEVLMB4XDTE4MDkxODA4MDUzMloXDTMz\r\n" \
+"MDkxOTA4MDUzMlowVzELMAkGA1UEBhMCQ04xEDAOBgNVBAgTB1NpQ2h1YW4xFTAT\r\n" \
+"BgNVBAoTDE1PQklMRVRFSy5DQTELMAkGA1UECxMCSVQxEjAQBgNVBAMTCU1PQklM\r\n" \
+"RVRFSzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAOkdYJF1h1xjKbY0\r\n" \
+"ipbl88G653PiCh8ZMjmIUYeiDKC8+0wtXZtHvQIl6AncOzBy9XHVOctbKn34exC8\r\n" \
+"SEotMuo2T49vs9VtE8GYu2pOrf3m42NpLRnYAxfm9qw53CMHx+Jn7Oa9fnxa8haA\r\n" \
+"pRc2BTVadWGoS8EEwoZFk0eNb7Z2Gc7U0c+GhISI4oVTTocGvGgMzkvduu5JJbbc\r\n" \
+"BOcNFrii9sRO9vtOYQtqOEg01Uum2Dwp/o2bDLXNJEqAIh4WACiM4iPmmlRHWT2y\r\n" \
+"NjQ3vcbEdrFwbHRtO46+Vw54HnSyCoFb3uCHMNMvXObZ/8AU9E3Cgat4j0sgEeB0\r\n" \
+"hqA4MiMCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAtEAjf0CjsLgG9ROdmp1qXYft\r\n" \
+"+ndIT5l82KRK57ZQsfdFbnJOvALeF/ICKU0M2TXgJNiGOA5RxDi00YYdMbOIPwVZ\r\n" \
+"JH4b87J/LYdLAGf+Q+kVI6gWH3hPm4Jzfzq/40KVrf3mpa54yWz6ZYtwfxBjrMgr\r\n" \
+"IVe0O5SIJ99lsddgzgUkqYN2vWJW2zZ50xuXOAyo+pOnjzX0wuOcaBT3JCHWJRAb\r\n" \
+"VhJCf9JbswDgnddJerqFtB8pnpAOdGokLCOoM06q3s3P9mhGX+72HXdX7G8CSAuG\r\n" \
+"PVCGf6RaF0/G4B9R1c3du3lZRlQWfx2pxyU0LS86iFQFWqzqcWEXIcULVdcErQ==\r\n" \
+"-----END CERTIFICATE-----\r\n"
+
+const char ca1_cert[]= CA_CERT;
+
+
+struct options
+{
+    const char *server_name;    /* hostname of the server (client only)     */
+    const char *server_addr;    /* address of the server (client only)      */
+    int server_port;            /* port on which the ssl service runs       */
+    int debug_level;            /* level of debugging                       */
+    int nbio;                   /* should I/O be blocking?                  */
+    const char *request_page;   /* page on server to request                */
+    int request_size;           /* pad request with header to requested size */
+    const char *ca_file;        /* the file with the CA certificate(s)      */
+    const char *ca_path;        /* the path with the CA certificate(s) reside */
+    const char *crt_file;       /* the file with the client certificate     */
+    const char *key_file;       /* the file with the client key             */
+    const char *psk;            /* the pre-shared key                       */
+    const char *psk_identity;   /* the pre-shared key identity              */
+    int force_ciphersuite[2];   /* protocol/ciphersuite to use, or all      */
+    int renegotiation;          /* enable / disable renegotiation           */
+    int allow_legacy;           /* allow legacy renegotiation               */
+    int renegotiate;            /* attempt renegotiation?                   */
+    int renego_delay;           /* delay before enforcing renegotiation     */
+    int exchanges;              /* number of data exchanges                 */
+    int min_version;            /* minimum protocol version accepted        */
+    int max_version;            /* maximum protocol version accepted        */
+    int auth_mode;              /* verify mode for connection               */
+    unsigned char mfl_code;     /* code for maximum fragment length         */
+    int trunc_hmac;             /* negotiate truncated hmac or not          */
+    int reconnect;              /* attempt to resume session                */
+    int reco_delay;             /* delay in seconds before resuming session */
+    int tickets;                /* enable / disable session tickets         */
+    const char *alpn_string;    /* ALPN supported protocols                 */
+} opt;
+
+
+static sim_client_handle_type cli_handle;
+int server_fd = -1;
+
+static void my_debug( void *ctx, int level, const char *str )
+{
+    ((void) level);
+
+    fprintf( (FILE *) ctx, "%s", str );
+    fflush(  (FILE *) ctx  );
+}
+
+
+static int ssl_client_init()
+{
+    int ret = 0, len, tail_len, i, written, frags;
+    unsigned char buf[SSL_MAX_CONTENT_LEN + 1];
+    const char *pers = "ssl_client";
+
+    entropy_context entropy;
+    ctr_drbg_context ctr_drbg;
+    ssl_context ssl;
+    ssl_session saved_session;
+    x509_crt cacert;
+    x509_crt clicert;
+    pk_context pkey;
+
+    memset( &ssl, 0, sizeof( ssl_context ) );
+    memset( &saved_session, 0, sizeof( ssl_session ) );
+    x509_crt_init( &cacert );
+    x509_crt_init( &clicert );
+    pk_init( &pkey );
+
+    fflush( stdout );
+
+     /*
+     * 0. Initialize the RNG and the session data
+     */
+
+    entropy_init( &entropy );
+    if( ( ret = ctr_drbg_init( &ctr_drbg, entropy_func, &entropy,
+                               (const unsigned char *) pers,
+                               strlen( pers ) ) ) != 0 )
+    {
+        printf( " failed\n  ! ctr_drbg_init returned -0x%x\n", -ret );
+        goto exit;
+    }
+
+    printf( " ok\n" );
+
+     /*
+     * 1.1. Load the trusted CA
+     */
+    //ret = x509_crt_parse(&cacert,ca1_cert,strlen(ca1_cert));
+    ret = x509_crt_parse_file( &cacert, opt.ca_path );
+    if( ret < 0 )
+    {
+        printf( " failed\n  !  ca x509_crt_parse returned -0x%x\n\n", -ret );
+        goto exit;
+    }
+    printf( " ok\n" );
+
+     /*
+     * 1.2. Load own certificate and private key
+     *
+     * (can be skipped if client authentication is not required)
+     */
+
+    ret = x509_crt_parse_file( &clicert, opt.crt_file );
+    if( ret != 0 )
+    {
+        printf( " failed\n  !  crt x509_crt_parse returned -0x%x\n\n", -ret );
+        goto exit;
+    }
+
+    ret = pk_parse_keyfile( &pkey, opt.key_file, NULL);
+    if( ret != 0 )
+    {
+        printf( " failed\n  !  key x509_crt_parse returned -0x%x\n\n", -ret );
+        goto exit;
+    }
+
+    printf( " ok\n" );
+
+     /*
+     * 2. Setup stuff
+     */
+    printf( "  . Setting up the SSL/TLS structure..." );
+    fflush( stdout );
+
+    if( ( ret = ssl_init( &ssl ) ) != 0 )
+    {
+        printf( " failed\n  ! ssl_init returned -0x%x\n\n", -ret );
+        goto exit;
+    }
+
+    ssl_set_endpoint( &ssl, SSL_IS_CLIENT );
+    ssl_set_authmode( &ssl, opt.auth_mode );
+
+    ssl_set_rng( &ssl, ctr_drbg_random, &ctr_drbg );
+    ssl_set_dbg( &ssl, my_debug, stdout );
+
+    ssl_set_bio( &ssl, net_recv, &server_fd, net_send, &server_fd );
+
+    ssl_set_renegotiation( &ssl, opt.renegotiation );
+    ssl_legacy_renegotiation( &ssl, opt.allow_legacy );
+
+    ssl_set_ca_chain( &ssl, &cacert, NULL, NULL );
+
+    if( ( ret = ssl_set_own_cert( &ssl, &clicert, &pkey ) ) != 0 )
+        {
+            printf( " failed\n  ! ssl_set_own_cert returned %d\n\n", ret );
+            goto exit;
+        }
+    if( opt.min_version != -1 )
+        ssl_set_min_version( &ssl, SSL_MAJOR_VERSION_3, opt.min_version );
+    if( opt.max_version != -1 )
+        ssl_set_max_version( &ssl, SSL_MAJOR_VERSION_3, opt.max_version );
+    printf( " ok\n" );
+    /*
+     * 3. Handshake
+     */
+    printf( "  . Performing the SSL/TLS handshake..." );
+    fflush( stdout );
+
+    while( ( ret = ssl_handshake( &ssl ) ) != 0 )
+    {
+        if( ret != POLARSSL_ERR_NET_WANT_READ && ret != POLARSSL_ERR_NET_WANT_WRITE )
+        {
+            printf( " failed\n  ! ssl_handshake returned -0x%x\n", -ret );
+            if( ret == POLARSSL_ERR_X509_CERT_VERIFY_FAILED )
+                printf(
+                    "    Unable to verify the server's certificate. "
+                        "Either it is invalid,\n"
+                    "    or you didn't set ca_file or ca_path "
+                        "to an appropriate value.\n"
+                    "    Alternatively, you may want to use "
+                        "auth_mode=optional for testing purposes.\n" );
+            printf( "\n" );
+            goto exit;
+        }
+    }
+
+    printf( " ok\n    [ Protocol is %s ]\n    [ Ciphersuite is %s ]\n",
+            ssl_get_version( &ssl ), ssl_get_ciphersuite( &ssl ) );
+
+    /*
+     * 4. Verify the server certificate
+     */
+    printf( "  . Verifying peer X.509 certificate..." );
+
+    if( ( ret = ssl_get_verify_result( &ssl ) ) != 0 )
+    {
+        printf( " failed\n" );
+
+        if( ( ret & BADCERT_EXPIRED ) != 0 )
+            printf( "  ! server certificate has expired\n" );
+
+        if( ( ret & BADCERT_REVOKED ) != 0 )
+            printf( "  ! server certificate has been revoked\n" );
+
+        if( ( ret & BADCERT_CN_MISMATCH ) != 0 )
+            printf( "  ! CN mismatch (expected CN=%s)\n", opt.server_name );
+
+        if( ( ret & BADCERT_NOT_TRUSTED ) != 0 )
+            printf( "  ! self-signed or not signed by a trusted CA\n" );
+
+        printf( "\n" );
+    }
+    else
+        printf( " ok\n" );
+
+    if( ssl_get_peer_cert( &ssl ) != NULL )
+    {
+        printf( "  . Peer certificate information    ...\n" );
+        x509_crt_info( (char *) buf, sizeof( buf ) - 1, "      ",
+                       ssl_get_peer_cert( &ssl ) );
+        printf( "%s\n", buf );
+    }
+    /*
+     * 5. Write the GET request
+     */
+    printf( "  > Write to server:" );
+    fflush( stdout );
+
+    len = snprintf( (char *) buf, sizeof(buf) - 1, GET_REQUEST,
+                    opt.request_page );
+    tail_len = strlen( GET_REQUEST_END );
+
+    /* Add padding to GET request to reach opt.request_size in length */
+    if( opt.request_size != DFL_REQUEST_SIZE &&
+        len + tail_len < opt.request_size )
+    {
+        memset( buf + len, 'A', opt.request_size - len - tail_len );
+        len += opt.request_size - len - tail_len;
+    }
+
+    strncpy( (char *) buf + len, GET_REQUEST_END, sizeof(buf) - len - 1 );
+    len += tail_len;
+
+    /* Truncate if request size is smaller than the "natural" size */
+    if( opt.request_size != DFL_REQUEST_SIZE &&
+        len > opt.request_size )
+    {
+        len = opt.request_size;
+
+        /* Still end with \r\n unless that's really not possible */
+        if( len >= 2 ) buf[len - 2] = '\r';
+        if( len >= 1 ) buf[len - 1] = '\n';
+    }
+
+    for( written = 0, frags = 0; written < len; written += ret, frags++ )
+    {
+        while( ( ret = ssl_write( &ssl, buf + written, len - written ) ) <= 0 )
+        {
+            if( ret != POLARSSL_ERR_NET_WANT_READ && ret != POLARSSL_ERR_NET_WANT_WRITE )
+            {
+                printf( " failed\n  ! ssl_write returned -0x%x\n\n", -ret );
+                goto exit;
+            }
+        }
+    }
+
+    buf[written] = '\0';
+    printf( " %d bytes written in %d fragments\n\n%s\n", written, frags, (char *) buf );
+
+    /*
+     * 6. Read the HTTP response
+     */
+    printf( "  < Read from server:" );
+    fflush( stdout );
+
+    do
+    {
+        len = sizeof( buf ) - 1;
+        memset( buf, 0, sizeof( buf ) );
+        ret = ssl_read( &ssl, buf, len );
+
+        if( ret == POLARSSL_ERR_NET_WANT_READ ||
+            ret == POLARSSL_ERR_NET_WANT_WRITE )
+            continue;
+
+        if( ret <= 0 )
+        {
+            switch( ret )
+            {
+                case POLARSSL_ERR_SSL_PEER_CLOSE_NOTIFY:
+                    printf( " connection was closed gracefully\n" );
+                    ret = 0;
+                    goto close_notify;
+
+                case 0:
+                case POLARSSL_ERR_NET_CONN_RESET:
+                    printf( " connection was reset by peer\n" );
+                    ret = 0;
+                    goto exit;
+
+                default:
+                    printf( " ssl_read returned -0x%x\n", -ret );
+                    goto exit;
+            }
+        }
+
+        len = ret;
+        buf[len] = '\0';
+        printf( " %d bytes read\n\n%s", len, (char *) buf );
+
+        /* End of message should be detected according to the syntax of the
+         * application protocol (eg HTTP), just use a dummy test here. */
+        if( ret > 0 && buf[len-1] == '\n' )
+        {
+            ret = 0;
+            break;
+        }
+    }
+    while( 1 );
+
+    /*
+     * 7. Done, cleanly close the connection
+     */
+close_notify:
+        printf( "  . Closing the connection..." );
+
+        while( ( ret = ssl_close_notify( &ssl ) ) < 0 )
+        {
+            if( ret == POLARSSL_ERR_NET_CONN_RESET )
+            {
+                printf( " ok (already closed by peer)\n" );
+                ret = 0;
+                goto exit;
+            }
+
+            if( ret != POLARSSL_ERR_NET_WANT_READ &&
+                ret != POLARSSL_ERR_NET_WANT_WRITE )
+            {
+                printf( " failed\n  ! ssl_close_notify returned %d\n\n", ret );
+                goto exit;
+            }
+        }
+
+        printf( " ok\n" );
+exit:
+    if( server_fd )
+        net_close( server_fd );
+
+    x509_crt_free( &clicert );
+    x509_crt_free( &cacert );
+    pk_free( &pkey );
+    ssl_session_free( &saved_session );
+    ssl_free( &ssl );
+    ctr_drbg_free( &ctr_drbg );
+    entropy_free( &entropy );
+
+    printf( " ok end\n" );
+    return 0;
+}
+
+int main(int argc, char *argv[])
+{
+    printf("Start!\n");
+
+    opt.server_name         = DFL_SERVER_NAME;
+    opt.server_addr         = DFL_SERVER_ADDR;
+    opt.server_port         = DFL_SERVER_PORT;
+    opt.debug_level         = DFL_DEBUG_LEVEL;
+    opt.nbio                = DFL_NBIO;
+    opt.request_page        = DFL_REQUEST_PAGE;
+    opt.request_size        = DFL_REQUEST_SIZE;
+    opt.ca_file             = DFL_CA_FILE;
+    opt.ca_path             = DFL_CA_PATH;
+    opt.crt_file            = DFL_CRT_FILE;
+    opt.key_file            = DFL_KEY_FILE;
+    opt.psk                 = DFL_PSK;
+    opt.psk_identity        = DFL_PSK_IDENTITY;
+    opt.force_ciphersuite[0]= DFL_FORCE_CIPHER;
+    opt.renegotiation       = DFL_RENEGOTIATION;
+    opt.allow_legacy        = DFL_ALLOW_LEGACY;
+    opt.renegotiate         = DFL_RENEGOTIATE;
+    opt.exchanges           = DFL_EXCHANGES;
+    opt.min_version         = DFL_MIN_VERSION;
+    opt.max_version         = DFL_MAX_VERSION;
+    opt.auth_mode           = DFL_AUTH_MODE;
+    opt.mfl_code            = DFL_MFL_CODE;
+    opt.trunc_hmac          = DFL_TRUNC_HMAC;
+    opt.reconnect           = DFL_RECONNECT;
+    opt.reco_delay          = DFL_RECO_DELAY;
+    opt.tickets             = DFL_TICKETS;
+    opt.alpn_string         = DFL_ALPN_STRING;
+
+
+    if(argc < 3)
+    {
+        printf("input error \n example: mbtk_test ip prot\n");
+        return -1;
+    }
+    opt.server_addr = argv[1];
+    opt.server_port = atoi(argv[2]);
+
+    int ret = -1;
+    if( ( ret = net_connect( &server_fd, opt.server_addr,
+                                         opt.server_port ) ) != 0 )
+    {
+        printf( " failed\n  ! net_connect returned -0x%x\n\n", -ret );
+        return -1;
+    }
+
+    ret = net_set_nonblock( server_fd );
+    if( ret != 0 )
+    {
+        printf( " failed\n  ! net_set_(non)block() returned -0x%x\n\n", -ret );
+        return -1;
+    }
+    printf( " ok\n" );
+    ret = ssl_client_init();
+    printf("ret is %d\n",ret);
+    printf("End!\n");
+    return 0;
+}
+#else
+int main(int argc, char *argv[])
+{
+	printf("No support polarssl.\n");
+	return 0;
+}
+#endif
\ No newline at end of file