ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/marvell/linux/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
new file mode 100644
index 0000000..c81af75
--- /dev/null
+++ b/marvell/linux/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
@@ -0,0 +1,35 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
+
+The DDR controller of the AR7xxx and AR9xxx families provides an interface
+to flush the FIFO between various devices and the DDR. This is mainly used
+by the IRQ controller to flush the FIFO before running the interrupt handler
+of such devices.
+
+Required properties:
+
+- compatible: has to be "qca,<soc-type>-ddr-controller",
+ "qca,[ar7100|ar7240]-ddr-controller" as fallback.
+ On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
+ fallback, otherwise "qca,ar7240-ddr-controller" should be used.
+- reg: Base address and size of the controller's memory area
+- #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode
+ the write buffer channel index, should be 1.
+
+Example:
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ ...
+
+ interrupt-controller {
+ ...
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };