ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arc/include/asm/entry-arcv2.h b/marvell/linux/arch/arc/include/asm/entry-arcv2.h
new file mode 100644
index 0000000..41b16f2
--- /dev/null
+++ b/marvell/linux/arch/arc/include/asm/entry-arcv2.h
@@ -0,0 +1,276 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_ARC_ENTRY_ARCV2_H
+#define __ASM_ARC_ENTRY_ARCV2_H
+
+#include <asm/asm-offsets.h>
+#include <asm/irqflags-arcv2.h>
+#include <asm/thread_info.h> /* For THREAD_SIZE */
+
+/*
+ * Interrupt/Exception stack layout (pt_regs) for ARCv2
+ * (End of struct aligned to end of page [unless nested])
+ *
+ * INTERRUPT EXCEPTION
+ *
+ * manual --------------------- manual
+ * | orig_r0 |
+ * | event/ECR |
+ * | bta |
+ * | user_r25 |
+ * | gp |
+ * | fp |
+ * | sp |
+ * | r12 |
+ * | r30 |
+ * | r58 |
+ * | r59 |
+ * hw autosave ---------------------
+ * optional | r0 |
+ * | r1 |
+ * ~ ~
+ * | r9 |
+ * | r10 |
+ * | r11 |
+ * | blink |
+ * | lpe |
+ * | lps |
+ * | lpc |
+ * | ei base |
+ * | ldi base |
+ * | jli base |
+ * ---------------------
+ * hw autosave | pc / eret |
+ * mandatory | stat32 / erstatus |
+ * ---------------------
+ */
+
+/*------------------------------------------------------------------------*/
+.macro INTERRUPT_PROLOGUE
+
+ ; (A) Before jumping to Interrupt Vector, hardware micro-ops did following:
+ ; 1. SP auto-switched to kernel mode stack
+ ; 2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0)
+ ; 3. Auto save: (mandatory) Push PC and STAT32 on stack
+ ; hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE
+ ; 4. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
+ ;
+ ; (B) Manually saved some regs: r12,r25,r30, sp,fp,gp, ACCL pair
+
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+ ; carve pt_regs on stack (case #3), PC/STAT32 already on stack
+ sub sp, sp, SZ_PT_REGS - 8
+
+ __SAVE_REGFILE_HARD
+#else
+ ; carve pt_regs on stack (case #4), which grew partially already
+ sub sp, sp, PT_r0
+#endif
+
+ __SAVE_REGFILE_SOFT
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+ ; (A) Before jumping to Exception Vector, hardware micro-ops did following:
+ ; 1. SP auto-switched to kernel mode stack
+ ; 2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0)
+ ;
+ ; (B) Manually save the complete reg file below
+
+ sub sp, sp, SZ_PT_REGS ; carve pt_regs
+
+ ; _HARD saves r10 clobbered by _SOFT as scratch hence comes first
+
+ __SAVE_REGFILE_HARD
+ __SAVE_REGFILE_SOFT
+
+ st r0, [sp] ; orig_r0
+
+ lr r10, [eret]
+ lr r11, [erstatus]
+ ST2 r10, r11, PT_ret
+
+ lr r10, [ecr]
+ lr r11, [erbta]
+ ST2 r10, r11, PT_event
+
+ ; OUTPUT: r10 has ECR expected by EV_Trap
+.endm
+
+/*------------------------------------------------------------------------
+ * This macro saves the registers manually which would normally be autosaved
+ * by hardware on taken interrupts. It is used by
+ * - exception handlers (which don't have autosave)
+ * - interrupt autosave disabled due to CONFIG_ARC_IRQ_NO_AUTOSAVE
+ */
+.macro __SAVE_REGFILE_HARD
+
+ ST2 r0, r1, PT_r0
+ ST2 r2, r3, PT_r2
+ ST2 r4, r5, PT_r4
+ ST2 r6, r7, PT_r6
+ ST2 r8, r9, PT_r8
+ ST2 r10, r11, PT_r10
+
+ st blink, [sp, PT_blink]
+
+ lr r10, [lp_end]
+ lr r11, [lp_start]
+ ST2 r10, r11, PT_lpe
+
+ st lp_count, [sp, PT_lpc]
+
+ ; skip JLI, LDI, EI for now
+.endm
+
+/*------------------------------------------------------------------------
+ * This macros saves a bunch of other registers which can't be autosaved for
+ * various reasons:
+ * - r12: the last caller saved scratch reg since hardware saves in pairs so r0-r11
+ * - r30: free reg, used by gcc as scratch
+ * - ACCL/ACCH pair when they exist
+ */
+.macro __SAVE_REGFILE_SOFT
+
+ ST2 gp, fp, PT_r26 ; gp (r26), fp (r27)
+
+ st r12, [sp, PT_sp + 4]
+ st r30, [sp, PT_sp + 8]
+
+ ; Saving pt_regs->sp correctly requires some extra work due to the way
+ ; Auto stack switch works
+ ; - U mode: retrieve it from AUX_USER_SP
+ ; - K mode: add the offset from current SP where H/w starts auto push
+ ;
+ ; 1. Utilize the fact that Z bit is set if Intr taken in U mode
+ ; 2. Upon entry SP is always saved (for any inspection, unwinding etc),
+ ; but on return, restored only if U mode
+
+ lr r10, [AUX_USER_SP] ; U mode SP
+
+ ; ISA requires ADD.nz to have same dest and src reg operands
+ mov.nz r10, sp
+ add.nz r10, r10, SZ_PT_REGS ; K mode SP
+
+ st r10, [sp, PT_sp] ; SP (pt_regs->sp)
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+ st r25, [sp, PT_user_r25]
+ GET_CURR_TASK_ON_CPU r25
+#endif
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+ ST2 r58, r59, PT_sp + 12
+#endif
+
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro __RESTORE_REGFILE_SOFT
+
+ LD2 gp, fp, PT_r26 ; gp (r26), fp (r27)
+
+ ld r12, [sp, PT_sp + 4]
+ ld r30, [sp, PT_sp + 8]
+
+ ; Restore SP (into AUX_USER_SP) only if returning to U mode
+ ; - for K mode, it will be implicitly restored as stack is unwound
+ ; - Z flag set on K is inverse of what hardware does on interrupt entry
+ ; but that doesn't really matter
+ bz 1f
+
+ ld r10, [sp, PT_sp] ; SP (pt_regs->sp)
+ sr r10, [AUX_USER_SP]
+1:
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+ ld r25, [sp, PT_user_r25]
+#endif
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+ LD2 r58, r59, PT_sp + 12
+#endif
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro __RESTORE_REGFILE_HARD
+
+ ld blink, [sp, PT_blink]
+
+ LD2 r10, r11, PT_lpe
+ sr r10, [lp_end]
+ sr r11, [lp_start]
+
+ ld r10, [sp, PT_lpc] ; lp_count can't be target of LD
+ mov lp_count, r10
+
+ LD2 r0, r1, PT_r0
+ LD2 r2, r3, PT_r2
+ LD2 r4, r5, PT_r4
+ LD2 r6, r7, PT_r6
+ LD2 r8, r9, PT_r8
+ LD2 r10, r11, PT_r10
+.endm
+
+
+/*------------------------------------------------------------------------*/
+.macro INTERRUPT_EPILOGUE
+
+ ; INPUT: r0 has STAT32 of calling context
+ ; INPUT: Z flag set if returning to K mode
+
+ ; _SOFT clobbers r10 restored by _HARD hence the order
+
+ __RESTORE_REGFILE_SOFT
+
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+ __RESTORE_REGFILE_HARD
+ add sp, sp, SZ_PT_REGS - 8
+#else
+ add sp, sp, PT_r0
+#endif
+
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_EPILOGUE
+
+ ; INPUT: r0 has STAT32 of calling context
+
+ btst r0, STATUS_U_BIT ; Z flag set if K, used in restoring SP
+
+ ld r10, [sp, PT_event + 4]
+ sr r10, [erbta]
+
+ LD2 r10, r11, PT_ret
+ sr r10, [eret]
+ sr r11, [erstatus]
+
+ __RESTORE_REGFILE_SOFT
+ __RESTORE_REGFILE_HARD
+
+ add sp, sp, SZ_PT_REGS
+.endm
+
+.macro FAKE_RET_FROM_EXCPN
+ lr r9, [status32]
+ bic r9, r9, STATUS_AE_MASK
+ or r9, r9, STATUS_IE_MASK
+ kflag r9
+.endm
+
+/* Get thread_info of "current" tsk */
+.macro GET_CURR_THR_INFO_FROM_SP reg
+ bmskn \reg, sp, THREAD_SHIFT - 1
+.endm
+
+/* Get CPU-ID of this core */
+.macro GET_CPU_ID reg
+ lr \reg, [identity]
+ xbfu \reg, \reg, 0xE8 /* 00111 01000 */
+ /* M = 8-1 N = 8 */
+.endm
+
+#endif