ASR_BASE

Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arc/kernel/module.c b/marvell/linux/arch/arc/kernel/module.c
new file mode 100644
index 0000000..c90c279
--- /dev/null
+++ b/marvell/linux/arch/arc/kernel/module.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <asm/unwind.h>
+
+static inline void arc_write_me(unsigned short *addr, unsigned long value)
+{
+	*addr = (value & 0xffff0000) >> 16;
+	*(addr + 1) = (value & 0xffff);
+}
+
+/*
+ * This gets called before relocation loop in generic loader
+ * Make a note of the section index of unwinding section
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			      char *secstr, struct module *mod)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	mod->arch.unw_sec_idx = 0;
+	mod->arch.unw_info = NULL;
+#endif
+	mod->arch.secstr = secstr;
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	if (mod->arch.unw_info)
+		unwind_remove_table(mod->arch.unw_info, 0);
+#endif
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,	/* sec index for sym tbl */
+		       unsigned int relsec,	/* sec index for relo sec */
+		       struct module *module)
+{
+	int i, n, relo_type;
+	Elf32_Rela *rel_entry = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym_entry, *sym_sec;
+	Elf32_Addr relocation, location, tgt_addr;
+	unsigned int tgtsec;
+
+	/*
+	 * @relsec has relocations e.g. .rela.init.text
+	 * @tgtsec is section to patch e.g. .init.text
+	 */
+	tgtsec = sechdrs[relsec].sh_info;
+	tgt_addr = sechdrs[tgtsec].sh_addr;
+	sym_sec = (Elf32_Sym *) sechdrs[symindex].sh_addr;
+	n = sechdrs[relsec].sh_size / sizeof(*rel_entry);
+
+	pr_debug("\nSection to fixup %s @%x\n",
+		 module->arch.secstr + sechdrs[tgtsec].sh_name, tgt_addr);
+	pr_debug("=========================================================\n");
+	pr_debug("r_off\tr_add\tst_value ADDRESS  VALUE\n");
+	pr_debug("=========================================================\n");
+
+	/* Loop thru entries in relocation section */
+	for (i = 0; i < n; i++) {
+		const char *s;
+
+		/* This is where to make the change */
+		location = tgt_addr + rel_entry[i].r_offset;
+
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym_entry = sym_sec + ELF32_R_SYM(rel_entry[i].r_info);
+
+		relocation = sym_entry->st_value + rel_entry[i].r_addend;
+
+		if (sym_entry->st_name == 0 && ELF_ST_TYPE (sym_entry->st_info) == STT_SECTION) {
+			s = module->arch.secstr + sechdrs[sym_entry->st_shndx].sh_name;
+		} else {
+			s = strtab + sym_entry->st_name;
+		}
+
+		pr_debug("   %x\t%x\t%x %x %x [%s]\n",
+			 rel_entry[i].r_offset, rel_entry[i].r_addend,
+			 sym_entry->st_value, location, relocation, s);
+
+		/* This assumes modules are built with -mlong-calls
+		 * so any branches/jumps are absolute 32 bit jmps
+		 * global data access again is abs 32 bit.
+		 * Both of these are handled by same relocation type
+		 */
+		relo_type = ELF32_R_TYPE(rel_entry[i].r_info);
+
+		if (likely(R_ARC_32_ME == relo_type))	/* ME ( S + A ) */
+			arc_write_me((unsigned short *)location, relocation);
+		else if (R_ARC_32 == relo_type)		/* ( S + A ) */
+			*((Elf32_Addr *) location) = relocation;
+		else if (R_ARC_32_PCREL == relo_type)	/* ( S + A ) - PDATA ) */
+			*((Elf32_Addr *) location) = relocation - location;
+		else
+			goto relo_err;
+
+	}
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+	if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
+		module->arch.unw_sec_idx = tgtsec;
+#endif
+
+	return 0;
+
+relo_err:
+	pr_err("%s: unknown relocation: %u\n",
+		module->name, ELF32_R_TYPE(rel_entry[i].r_info));
+	return -ENOEXEC;
+
+}
+
+/* Just before lift off: After sections have been relocated, we add the
+ * dwarf section to unwinder table pool
+ * This couldn't be done in module_frob_arch_sections() because
+ * relocations had not been applied by then
+ */
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		    struct module *mod)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	void *unw;
+	int unwsec = mod->arch.unw_sec_idx;
+
+	if (unwsec) {
+		unw = unwind_add_table(mod, (void *)sechdrs[unwsec].sh_addr,
+				       sechdrs[unwsec].sh_size);
+		mod->arch.unw_info = unw;
+	}
+#endif
+	return 0;
+}