ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/compressed/head-sharpsl.S b/marvell/linux/arch/arm/boot/compressed/head-sharpsl.S
new file mode 100644
index 0000000..992e784
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/compressed/head-sharpsl.S
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/arch/arm/boot/compressed/head-sharpsl.S
+ *
+ * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
+ *
+ * Sharp's bootloader doesn't pass any kind of machine ID
+ * so we have to figure out the machine for ourselves...
+ *
+ * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
+ * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
+ * Akita (SL-C1000) and Borzoi (SL-C3100).
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_PXA_SHARPSL
+#error What am I doing here...
+#endif
+
+ .section ".start", "ax"
+
+__SharpSL_start:
+
+/* Check for TC6393 - if found we have a Tosa */
+ ldr r7, .TOSAID
+ mov r1, #0x10000000 @ Base address of TC6393 chip
+ mov r6, #0x03
+ ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003
+ cmp r6, r3
+ beq .SHARPEND @ Success -> tosa
+
+/* Check for pxa270 - if found, branch */
+ mrc p15, 0, r4, c0, c0 @ Get Processor ID
+ and r4, r4, #0xffffff00
+ ldr r3, .PXA270ID
+ cmp r4, r3
+ beq .PXA270
+
+/* Check for w100 - if not found we have a Poodle */
+ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset
+
+ mov r6, #0x31 @ Load Magic Init value
+ str r6, [r1, #0x280] @ to SCRATCH_UMSK
+ mov r5, #0x3000
+.W100LOOP:
+ subs r5, r5, #1
+ bne .W100LOOP
+ mov r6, #0x30 @ Load 2nd Magic Init value
+ str r6, [r1, #0x280] @ to SCRATCH_UMSK
+
+ ldr r6, [r1, #0] @ Load Chip ID
+ ldr r3, .W100ID
+ ldr r7, .POODLEID
+ cmp r6, r3
+ bne .SHARPEND @ We have no w100 - Poodle
+
+/* Check for pxa250 - if found we have a Corgi */
+ ldr r7, .CORGIID
+ ldr r3, .PXA255ID
+ cmp r4, r3
+ blo .SHARPEND @ We have a PXA250 - Corgi
+
+/* Check for 64MiB flash - if found we have a Shepherd */
+ bl get_flash_ids
+ ldr r7, .SHEPHERDID
+ cmp r3, #0x76 @ 64MiB flash
+ beq .SHARPEND @ We have Shepherd
+
+/* Must be a Husky */
+ ldr r7, .HUSKYID @ Must be Husky
+ b .SHARPEND
+
+.PXA270:
+/* Check for 16MiB flash - if found we have Spitz */
+ bl get_flash_ids
+ ldr r7, .SPITZID
+ cmp r3, #0x73 @ 16MiB flash
+ beq .SHARPEND @ We have Spitz
+
+/* Check for a second SCOOP chip - if found we have Borzoi */
+ ldr r1, .SCOOP2ADDR
+ ldr r7, .BORZOIID
+ mov r6, #0x0140
+ strh r6, [r1]
+ ldrh r6, [r1]
+ cmp r6, #0x0140
+ beq .SHARPEND @ We have Borzoi
+
+/* Must be Akita */
+ ldr r7, .AKITAID
+ b .SHARPEND @ We have Borzoi
+
+.PXA255ID:
+ .word 0x69052d00 @ PXA255 Processor ID
+.PXA270ID:
+ .word 0x69054100 @ PXA270 Processor ID
+.W100ID:
+ .word 0x57411002 @ w100 Chip ID
+.W100ADDR:
+ .word 0x08010000 @ w100 Chip ID Reg Address
+.SCOOP2ADDR:
+ .word 0x08800040
+.POODLEID:
+ .word MACH_TYPE_POODLE
+.CORGIID:
+ .word MACH_TYPE_CORGI
+.SHEPHERDID:
+ .word MACH_TYPE_SHEPHERD
+.HUSKYID:
+ .word MACH_TYPE_HUSKY
+.TOSAID:
+ .word MACH_TYPE_TOSA
+.SPITZID:
+ .word MACH_TYPE_SPITZ
+.AKITAID:
+ .word MACH_TYPE_AKITA
+.BORZOIID:
+ .word MACH_TYPE_BORZOI
+
+/*
+ * Return: r2 - NAND Manufacturer ID
+ * r3 - NAND Chip ID
+ * Corrupts: r1
+ */
+get_flash_ids:
+ mov r1, #0x0c000000 @ Base address of NAND chip
+ ldrb r3, [r1, #24] @ Load FLASHCTL
+ bic r3, r3, #0x11 @ SET NCE
+ orr r3, r3, #0x0a @ SET CLR + FLWP
+ strb r3, [r1, #24] @ Save to FLASHCTL
+ mov r2, #0x90 @ Command "readid"
+ strb r2, [r1, #20] @ Save to FLASHIO
+ bic r3, r3, #2 @ CLR CLE
+ orr r3, r3, #4 @ SET ALE
+ strb r3, [r1, #24] @ Save to FLASHCTL
+ mov r2, #0 @ Address 0x00
+ strb r2, [r1, #20] @ Save to FLASHIO
+ bic r3, r3, #4 @ CLR ALE
+ strb r3, [r1, #24] @ Save to FLASHCTL
+.fids1:
+ ldrb r3, [r1, #24] @ Load FLASHCTL
+ tst r3, #32 @ Is chip ready?
+ beq .fids1
+ ldrb r2, [r1, #20] @ NAND Manufacturer ID
+ ldrb r3, [r1, #20] @ NAND Chip ID
+ mov pc, lr
+
+.SHARPEND: