ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/animeo_ip.dts b/marvell/linux/arch/arm/boot/dts/animeo_ip.dts
new file mode 100644
index 0000000..c36d28c
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/animeo_ip.dts
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+ model = "Somfy Animeo IP";
+ compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+ aliases {
+ serial0 = &usart1;
+ serial1 = &usart2;
+ serial2 = &usart0;
+ serial3 = &dbgu;
+ serial4 = &usart3;
+ serial5 = &uart0;
+ serial6 = &uart1;
+ };
+
+ chosen {
+ stdout-path = &usart2;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ tcb0: timer@fffa0000 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+ phy-mode = "mii";
+ status = "okay";
+ };
+
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <&pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ };
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+ };
+
+ ebi: ebi@10000000 {
+ status = "okay";
+
+ nand_controller: nand-controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ barebox@0 {
+ label = "barebox";
+ reg = <0x0 0x58000>;
+ };
+
+ u_boot_env@58000 {
+ label = "u_boot_env";
+ reg = <0x58000 0x8000>;
+ };
+
+ ubi@60000 {
+ label = "ubi";
+ reg = <0x60000 0x1FA0000>;
+ };
+ };
+ };
+ };
+ };
+
+ usb0: ohci@500000 {
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green {
+ label = "power_green";
+ gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ power_red {
+ label = "power_red";
+ gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ tx_green {
+ label = "tx_green";
+ gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ tx_red {
+ label = "tx_red";
+ gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keyswitch_in {
+ label = "keyswitch_in";
+ gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <28>;
+ wakeup-source;
+ };
+
+ error_in {
+ label = "error_in";
+ gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <29>;
+ wakeup-source;
+ };
+
+ btn {
+ label = "btn";
+ gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
+ linux,code = <31>;
+ wakeup-source;
+ };
+ };
+};