ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/bcm-cygnus.dtsi b/marvell/linux/arch/arm/boot/dts/bcm-cygnus.dtsi
new file mode 100644
index 0000000..9ca7b42
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -0,0 +1,624 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,cygnus";
+ model = "Broadcom Cygnus SoC";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ ethernet0 = ð0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ /include/ "bcm-cygnus-clock.dtsi"
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ core@19000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
+
+ L2: l2-cache@22000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ otp: otp@301c800 {
+ compatible = "brcm,ocotp";
+ reg = <0x0301c800 0x2c>;
+ brcm,ocotp-size = <2048>;
+ status = "disabled";
+ };
+
+ pcie_phy: phy@301d0a0 {
+ compatible = "brcm,cygnus-pcie-phy";
+ reg = <0x0301d0a0 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie0_phy: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ pcie1_phy: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ pinctrl: pinctrl@301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x30>,
+ <0x0301d24c 0x2c>;
+
+ spi_0: spi_0 {
+ function = "spi0";
+ groups = "spi0_grp";
+ };
+
+ spi_1: spi_1 {
+ function = "spi1";
+ groups = "spi1_grp";
+ };
+
+ spi_2: spi_2 {
+ function = "spi2";
+ groups = "spi2_grp";
+ };
+ };
+
+ mailbox: mailbox@3024024 {
+ compatible = "brcm,iproc-mailbox";
+ reg = <0x03024024 0x40>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ #mbox-cells = <1>;
+ };
+
+ gpio_crmu: gpio@3024800 {
+ compatible = "brcm,cygnus-crmu-gpio";
+ reg = <0x03024800 0x50>,
+ <0x03024008 0x18>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&mailbox>;
+ interrupts = <0>;
+ };
+
+ mdio: mdio@18002000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18002000 0x8>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ status = "disabled";
+
+ gphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ gphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ switch: switch@18007000 {
+ compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+ reg = <0x18007000 0x1000>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-handle = <&gphy0>;
+ phy-mode = "rgmii";
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-handle = <&gphy1>;
+ phy-mode = "rgmii";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ i2c0: i2c@18008000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x18008000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ wdt0: wdt@18009000 {
+ compatible = "arm,sp805" , "arm,primecell";
+ reg = <0x18009000 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-ccm-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ ngpios = <24>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ i2c1: i2c@1800b000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x1800b000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pcie-phy";
+
+ status = "disabled";
+
+ msi-parent = <&msi0>;
+ msi0: msi-controller {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy";
+
+ status = "disabled";
+
+ msi-parent = <&msi1>;
+ msi1: msi-controller {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ dma0: dma@18018000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x18018000 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ uart0: serial@18020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@18021000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18021000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart2: serial@18022000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18022000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart3: serial@18023000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18023000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ spi0: spi@18028000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x18028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_0>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ spi1: spi@18029000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x18029000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_1>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ spi2: spi@1802a000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1802a000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_2>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ rng: rng@18032000 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x18032000 0x28>;
+ };
+
+ sdhci0: sdhci@18041000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18041000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ status = "disabled";
+ };
+
+ eth0: ethernet@18042000 {
+ compatible = "brcm,amac";
+ reg = <0x18042000 0x1000>,
+ <0x18110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@18043000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18043000 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ status = "disabled";
+ };
+
+ nand_controller: nand-controller@18046000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+ <0x18046f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ ehci0: usb@18048000 {
+ compatible = "generic-ehci";
+ reg = <0x18048000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@18048800 {
+ compatible = "generic-ohci";
+ reg = <0x18048800 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ clcd: clcd@180a0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x180a0000 0x1000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+ clocks = <&axi41_clk>, <&apb_clk>;
+ clock-names = "clcdclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ v3d: v3d@180a2000 {
+ compatible = "brcm,cygnus-v3d";
+ reg = <0x180a2000 0x1000>;
+ clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+ clock-names = "v3d_clk";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vc4: gpu {
+ compatible = "brcm,cygnus-vc4";
+ };
+
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-asiu-gpio";
+ reg = <0x180a5000 0x668>;
+ ngpios = <146>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ interrupt-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 42 1>,
+ <&pinctrl 1 44 3>,
+ <&pinctrl 4 48 1>,
+ <&pinctrl 5 50 3>,
+ <&pinctrl 8 126 1>,
+ <&pinctrl 9 155 1>,
+ <&pinctrl 10 152 1>,
+ <&pinctrl 11 154 1>,
+ <&pinctrl 12 153 1>,
+ <&pinctrl 13 127 3>,
+ <&pinctrl 16 140 1>,
+ <&pinctrl 17 145 7>,
+ <&pinctrl 24 130 10>,
+ <&pinctrl 34 141 4>,
+ <&pinctrl 38 54 1>,
+ <&pinctrl 39 56 3>,
+ <&pinctrl 42 60 3>,
+ <&pinctrl 45 64 3>,
+ <&pinctrl 48 68 2>,
+ <&pinctrl 50 84 6>,
+ <&pinctrl 56 94 6>,
+ <&pinctrl 62 72 1>,
+ <&pinctrl 63 70 1>,
+ <&pinctrl 64 80 1>,
+ <&pinctrl 65 74 3>,
+ <&pinctrl 68 78 1>,
+ <&pinctrl 69 82 1>,
+ <&pinctrl 70 156 17>,
+ <&pinctrl 87 104 12>,
+ <&pinctrl 99 102 2>,
+ <&pinctrl 101 90 4>,
+ <&pinctrl 105 116 6>,
+ <&pinctrl 111 100 2>,
+ <&pinctrl 113 122 4>,
+ <&pinctrl 123 11 1>,
+ <&pinctrl 124 38 4>,
+ <&pinctrl 128 43 1>,
+ <&pinctrl 129 47 1>,
+ <&pinctrl 130 49 1>,
+ <&pinctrl 131 53 1>,
+ <&pinctrl 132 55 1>,
+ <&pinctrl 133 59 1>,
+ <&pinctrl 134 63 1>,
+ <&pinctrl 135 67 1>,
+ <&pinctrl 136 71 1>,
+ <&pinctrl 137 73 1>,
+ <&pinctrl 138 77 1>,
+ <&pinctrl 139 79 1>,
+ <&pinctrl 140 81 1>,
+ <&pinctrl 141 83 1>,
+ <&pinctrl 142 10 1>;
+ };
+
+ ts_adc_syscon: ts_adc_syscon@180a6000 {
+ compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+ reg = <0x180a6000 0xc30>;
+ };
+
+ touchscreen: touchscreen@180a6000 {
+ compatible = "brcm,iproc-touchscreen";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_syscon = <&ts_adc_syscon>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ adc: adc@180a6000 {
+ compatible = "brcm,iproc-static-adc";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ adc-syscon = <&ts_adc_syscon>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pwm: pwm@180aa500 {
+ compatible = "brcm,kona-pwm";
+ reg = <0x180aa500 0xc4>;
+ #pwm-cells = <3>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+ status = "disabled";
+ };
+
+ keypad: keypad@180ac000 {
+ compatible = "brcm,bcm-keypad";
+ reg = <0x180ac000 0x14c>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+ clock-names = "peri_clk";
+ clock-frequency = <31250>;
+ pull-up-enabled;
+ col-debounce-filter-period = <0>;
+ status-debounce-filter-period = <0>;
+ row-output-enabled;
+ status = "disabled";
+ };
+ };
+};