ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/efm32gg.dtsi b/marvell/linux/arch/arm/boot/dts/efm32gg.dtsi
new file mode 100644
index 0000000..8a58e49
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/efm32gg.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Energy Micro EFM32 Giant Gecko SoC.
+ *
+ * Documentation available from
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
+ */
+
+#include "armv7-m.dtsi"
+#include "dt-bindings/clock/efm32-cmu.h"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ };
+
+ soc {
+ adc: adc@40002000 {
+ compatible = "energymicro,efm32-adc";
+ reg = <0x40002000 0x400>;
+ interrupts = <7>;
+ clocks = <&cmu clk_HFPERCLKADC0>;
+ status = "disabled";
+ };
+
+ gpio: gpio@40006000 {
+ compatible = "energymicro,efm32-gpio";
+ reg = <0x40006000 0x1000>;
+ interrupts = <1 11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clocks = <&cmu clk_HFPERCLKGPIO>;
+ status = "ok";
+ };
+
+ i2c0: i2c@4000a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-i2c";
+ reg = <0x4000a000 0x400>;
+ interrupts = <9>;
+ clocks = <&cmu clk_HFPERCLKI2C0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@4000a400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-i2c";
+ reg = <0x4000a400 0x400>;
+ interrupts = <10>;
+ clocks = <&cmu clk_HFPERCLKI2C1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ spi0: spi@4000c000 { /* USART0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-spi";
+ reg = <0x4000c000 0x400>;
+ interrupts = <3 4>;
+ clocks = <&cmu clk_HFPERCLKUSART0>;
+ status = "disabled";
+ };
+
+ spi1: spi@4000c400 { /* USART1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-spi";
+ reg = <0x4000c400 0x400>;
+ interrupts = <15 16>;
+ clocks = <&cmu clk_HFPERCLKUSART1>;
+ status = "disabled";
+ };
+
+ spi2: spi@4000c800 { /* USART2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-spi";
+ reg = <0x4000c800 0x400>;
+ interrupts = <18 19>;
+ clocks = <&cmu clk_HFPERCLKUSART2>;
+ status = "disabled";
+ };
+
+ uart0: uart@4000c000 { /* USART0 */
+ compatible = "energymicro,efm32-uart";
+ reg = <0x4000c000 0x400>;
+ interrupts = <3 4>;
+ clocks = <&cmu clk_HFPERCLKUSART0>;
+ status = "disabled";
+ };
+
+ uart1: uart@4000c400 { /* USART1 */
+ compatible = "energymicro,efm32-uart";
+ reg = <0x4000c400 0x400>;
+ interrupts = <15 16>;
+ clocks = <&cmu clk_HFPERCLKUSART1>;
+ status = "disabled";
+ };
+
+ uart2: uart@4000c800 { /* USART2 */
+ compatible = "energymicro,efm32-uart";
+ reg = <0x4000c800 0x400>;
+ interrupts = <18 19>;
+ clocks = <&cmu clk_HFPERCLKUSART2>;
+ status = "disabled";
+ };
+
+ uart3: uart@4000e000 { /* UART0 */
+ compatible = "energymicro,efm32-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts = <20 21>;
+ clocks = <&cmu clk_HFPERCLKUART0>;
+ status = "disabled";
+ };
+
+ uart4: uart@4000e400 { /* UART1 */
+ compatible = "energymicro,efm32-uart";
+ reg = <0x4000e400 0x400>;
+ interrupts = <22 23>;
+ clocks = <&cmu clk_HFPERCLKUART1>;
+ status = "disabled";
+ };
+
+ timer0: timer@40010000 {
+ compatible = "energymicro,efm32-timer";
+ reg = <0x40010000 0x400>;
+ interrupts = <2>;
+ clocks = <&cmu clk_HFPERCLKTIMER0>;
+ };
+
+ timer1: timer@40010400 {
+ compatible = "energymicro,efm32-timer";
+ reg = <0x40010400 0x400>;
+ interrupts = <12>;
+ clocks = <&cmu clk_HFPERCLKTIMER1>;
+ };
+
+ timer2: timer@40010800 {
+ compatible = "energymicro,efm32-timer";
+ reg = <0x40010800 0x400>;
+ interrupts = <13>;
+ clocks = <&cmu clk_HFPERCLKTIMER2>;
+ };
+
+ timer3: timer@40010c00 {
+ compatible = "energymicro,efm32-timer";
+ reg = <0x40010c00 0x400>;
+ interrupts = <14>;
+ clocks = <&cmu clk_HFPERCLKTIMER3>;
+ };
+
+ cmu: cmu@400c8000 {
+ compatible = "efm32gg,cmu";
+ reg = <0x400c8000 0x400>;
+ interrupts = <32>;
+ #clock-cells = <1>;
+ };
+ };
+};