ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/exynos4412-odroidx.dts b/marvell/linux/arch/arm/boot/dts/exynos4412-odroidx.dts
new file mode 100644
index 0000000..3ea2a01
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based
+ * on Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-X board based on Exynos4412";
+ compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x3FF00000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2:mmc0";
+ gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ gpio_keys {
+ pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+ home_key {
+ gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_HOME>;
+ label = "home key";
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ regulator_p3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo10_reg>;
+ status = "okay";
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+ regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&ehci {
+ phys = <&exynos_usbphy 2>;
+ phy-names = "hsic0";
+};
+
+&mshc_0 {
+ vqmmc-supply = <&buck8_reg>;
+};
+
+&pinctrl_1 {
+ gpio_home_key: home_key {
+ samsung,pins = "gpx2-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&sound {
+ model = "Odroid-X";
+ samsung,audio-widgets =
+ "Headphone", "Headphone Jack",
+ "Microphone", "Mic Jack",
+ "Microphone", "DMIC";
+ samsung,audio-routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "IN1", "Mic Jack",
+ "Mic Jack", "MICBIAS";
+};