ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/gemini-wbd111.dts b/marvell/linux/arch/arm/boot/dts/gemini-wbd111.dts
new file mode 100644
index 0000000..5602ba8
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/gemini-wbd111.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Wiliboard WBD-111";
+ compatible = "wiliboard,wbd111", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-setup {
+ debounce-interval = <100>;
+ wakeup-source;
+ linux,code = <KEY_SETUP>;
+ label = "reset";
+ /* Conflict with ICE */
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-red-l3 {
+ label = "wbd111:red:L3";
+ /* Conflict with TVC and extended parallel flash */
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-green-l4 {
+ label = "wbd111:green:L4";
+ /* Conflict with TVC and extended parallel flash */
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-red-l4 {
+ label = "wbd111:red:L4";
+ /* Conflict with TVC and extended parallel flash */
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-greeb-l3 {
+ label = "wbd111:green:L3";
+ /* Conflict with TVC and extended parallel flash */
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 8MB of flash */
+ reg = <0x30000000 0x00800000>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@20000 {
+ label = "kernel";
+ reg = <0x00020000 0x00100000>;
+ };
+ partition@120000 {
+ label = "rootfs";
+ reg = <0x00120000 0x006a0000>;
+ };
+ partition@7c0000 {
+ label = "VCTL";
+ reg = <0x007c0000 0x00010000>;
+ read-only;
+ };
+ partition@7d0000 {
+ label = "cfg";
+ reg = <0x007d0000 0x00010000>;
+ read-only;
+ };
+ partition@7e0000 {
+ label = "FIS";
+ reg = <0x007e0000 0x00010000>;
+ read-only;
+ };
+ };
+
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ * gpio0agrp cover line 0-4
+ * gpio0bgrp cover line 5
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups = "gpio0agrp",
+ "gpio0bgrp";
+ };
+ };
+ };
+ };
+
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
+
+ pci@50000000 {
+ status = "okay";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+ };
+
+ ethernet@60000000 {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet-port@1 {
+ /* Not used in this platform */
+ };
+ };
+
+ usb@68000000 {
+ status = "okay";
+ };
+
+ usb@69000000 {
+ status = "okay";
+ };
+ };
+};