ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/integrator.dtsi b/marvell/linux/arch/arm/boot/dts/integrator.dtsi
new file mode 100644
index 0000000..602f74d
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/integrator.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>;
+ };
+
+ core-module@10000000 {
+ compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
+ reg = <0x10000000 0x200>;
+
+ /* Use core module LED to indicate CPU load */
+ led@c.0 {
+ compatible = "register-bit-led";
+ offset = <0x0c>;
+ mask = <0x01>;
+ label = "integrator:core_module";
+ linux,default-trigger = "cpu0";
+ default-state = "on";
+ };
+ };
+
+ ebi@12000000 {
+ compatible = "arm,external-bus-interface";
+ reg = <0x12000000 0x100>;
+ };
+
+ timer@13000000 {
+ reg = <0x13000000 0x100>;
+ interrupt-parent = <&pic>;
+ interrupts = <5>;
+ };
+
+ timer@13000100 {
+ reg = <0x13000100 0x100>;
+ interrupt-parent = <&pic>;
+ interrupts = <6>;
+ };
+
+ timer@13000200 {
+ reg = <0x13000200 0x100>;
+ interrupt-parent = <&pic>;
+ interrupts = <7>;
+ };
+
+ pic@14000000 {
+ compatible = "arm,versatile-fpga-irq";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x14000000 0x100>;
+ clear-mask = <0xffffffff>;
+ };
+
+ flash@24000000 {
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x24000000 0x02000000>;
+ bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
+ };
+
+ fpga {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&pic>;
+
+ /*
+ * These PrimeCells are in the same locations and using the
+ * same interrupts in all Integrators, however the silicon
+ * version deployed is different.
+ */
+ rtc@15000000 {
+ reg = <0x15000000 0x1000>;
+ interrupts = <8>;
+ };
+
+ uart@16000000 {
+ reg = <0x16000000 0x1000>;
+ interrupts = <1>;
+ };
+
+ uart@17000000 {
+ reg = <0x17000000 0x1000>;
+ interrupts = <2>;
+ };
+
+ kmi@18000000 {
+ reg = <0x18000000 0x1000>;
+ interrupts = <3>;
+ };
+
+ kmi@19000000 {
+ reg = <0x19000000 0x1000>;
+ interrupts = <4>;
+ };
+
+ syscon {
+ /* Debug registers mapped as syscon */
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000000 0x10>;
+
+ led@4.0 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x01>;
+ label = "integrator:green0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@4.1 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x02>;
+ label = "integrator:yellow";
+ default-state = "off";
+ };
+ led@4.2 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x04>;
+ label = "integrator:red";
+ default-state = "off";
+ };
+ led@4.3 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x08>;
+ label = "integrator:green1";
+ default-state = "off";
+ };
+ };
+ };
+};