ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/omap4-droid4-xt894.dts b/marvell/linux/arch/arm/boot/dts/omap4-droid4-xt894.dts
new file mode 100644
index 0000000..73425f6
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -0,0 +1,785 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
+
+/ {
+ model = "Motorola Droid 4 XT894";
+ compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
+ /*
+ * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+ * then 1023 - 1024 seems to contain mbm.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x3fd00000>; /* 1021 MB */
+ };
+
+ /* Poweroff GPIO probably connected to CPCAP */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff_gpio>;
+ pinctrl-names = "default";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ pinctrl-0 = <&hdmi_hpd_gpio>;
+ pinctrl-names = "default";
+ label = "hdmi";
+ type = "d";
+
+ hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
+ /*
+ * HDMI 5V regulator probably sourced from battery. Let's keep
+ * keep this as always enabled for HDMI to work until we've
+ * figured what the encoder chip is.
+ */
+ hdmi_regulator: regulator-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ /* FS USB Host PHY on port 1 for mdm6600 */
+ fsusb1_phy: usb-phy@1 {
+ compatible = "motorola,mapphone-mdm6600";
+ pinctrl-0 = <&usb_mdm6600_pins>;
+ pinctrl-names = "default";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
+ /* mode: gpio_148 gpio_149 */
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ /* cmd: gpio_103 gpio_104 gpio_142 */
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ /* status: gpio_52 gpio_53 gpio_55 */
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB host TLL nop-phy on port 2 for w3glte */
+ hsusb2_phy: usb-phy@2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ /* LCD regulator from sw5 source */
+ lcd_regulator: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ enable-active-high;
+ vin-supply = <&sw5>;
+ };
+
+ /* This is probably coming straight from the battery.. */
+ wl12xx_vmmc: regulator-wl12xx {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ volume_down {
+ label = "Volume Down";
+ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
+ linux,code = <KEY_VOLUMEDOWN>;
+ linux,can-disable;
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ };
+
+ slider {
+ label = "Keypad Slide";
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ linux,can-disable;
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ };
+ };
+
+ soundcard {
+ compatible = "audio-graph-card";
+ label = "Droid 4 Audio";
+
+ simple-graph-card,widgets =
+ "Speaker", "Earpiece",
+ "Speaker", "Loudspeaker",
+ "Headphone", "Headphone Jack",
+ "Microphone", "Internal Mic";
+
+ simple-graph-card,routing =
+ "Earpiece", "EP",
+ "Loudspeaker", "SPKR",
+ "Headphone Jack", "HSL",
+ "Headphone Jack", "HSR",
+ "MICR", "Internal Mic";
+
+ dais = <&mcbsp2_port>, <&mcbsp3_port>;
+ };
+
+ pwm8: dmtimer-pwm-8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: dmtimer-pwm-9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <10000000>;
+ };
+};
+
+&dss {
+ status = "okay";
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcsi>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: display {
+ compatible = "panel-dsi-cm";
+ label = "lcd0";
+ vddi-supply = <&lcd_regulator>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+
+ width-mm = <50>;
+ height-mm = <89>;
+
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <540>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <960>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ status = "okay";
+ pinctrl-0 = <&dss_hdmi_pins>;
+ pinctrl-names = "default";
+ vdda-supply = <&vdac>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+&i2c1 {
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ pinctrl-0 = <&tmp105_irq>;
+ pinctrl-names = "default";
+ /* kpd_row0.gpio_178 */
+ interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
+ &omap4_pmx_core 0x14e>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+
+ /* Row 1 */
+ MATRIX_KEY(0, 2, KEY_1)
+ MATRIX_KEY(0, 6, KEY_2)
+ MATRIX_KEY(2, 3, KEY_3)
+ MATRIX_KEY(0, 7, KEY_4)
+ MATRIX_KEY(0, 4, KEY_5)
+ MATRIX_KEY(5, 5, KEY_6)
+ MATRIX_KEY(0, 1, KEY_7)
+ MATRIX_KEY(0, 5, KEY_8)
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(1, 6, KEY_0)
+
+ /* Row 2 */
+ MATRIX_KEY(3, 4, KEY_APOSTROPHE)
+ MATRIX_KEY(7, 6, KEY_Q)
+ MATRIX_KEY(7, 7, KEY_W)
+ MATRIX_KEY(7, 2, KEY_E)
+ MATRIX_KEY(1, 0, KEY_R)
+ MATRIX_KEY(4, 4, KEY_T)
+ MATRIX_KEY(1, 2, KEY_Y)
+ MATRIX_KEY(6, 7, KEY_U)
+ MATRIX_KEY(2, 2, KEY_I)
+ MATRIX_KEY(5, 6, KEY_O)
+ MATRIX_KEY(3, 7, KEY_P)
+ MATRIX_KEY(6, 5, KEY_BACKSPACE)
+
+ /* Row 3 */
+ MATRIX_KEY(5, 4, KEY_TAB)
+ MATRIX_KEY(5, 7, KEY_A)
+ MATRIX_KEY(2, 7, KEY_S)
+ MATRIX_KEY(7, 0, KEY_D)
+ MATRIX_KEY(2, 6, KEY_F)
+ MATRIX_KEY(6, 2, KEY_G)
+ MATRIX_KEY(6, 6, KEY_H)
+ MATRIX_KEY(1, 4, KEY_J)
+ MATRIX_KEY(3, 1, KEY_K)
+ MATRIX_KEY(2, 1, KEY_L)
+ MATRIX_KEY(4, 6, KEY_ENTER)
+
+ /* Row 4 */
+ MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
+ MATRIX_KEY(6, 1, KEY_Z)
+ MATRIX_KEY(7, 4, KEY_X)
+ MATRIX_KEY(5, 1, KEY_C)
+ MATRIX_KEY(1, 7, KEY_V)
+ MATRIX_KEY(2, 4, KEY_B)
+ MATRIX_KEY(4, 1, KEY_N)
+ MATRIX_KEY(1, 1, KEY_M)
+ MATRIX_KEY(3, 5, KEY_COMMA)
+ MATRIX_KEY(5, 2, KEY_DOT)
+ MATRIX_KEY(6, 3, KEY_UP)
+ MATRIX_KEY(7, 3, KEY_OK)
+
+ /* Row 5 */
+ MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
+ MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
+ MATRIX_KEY(6, 0, KEY_MINUS)
+ MATRIX_KEY(4, 7, KEY_EQUAL)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(3, 2, KEY_SLASH)
+ MATRIX_KEY(4, 3, KEY_LEFT)
+ MATRIX_KEY(5, 3, KEY_DOWN)
+ MATRIX_KEY(3, 3, KEY_RIGHT)
+
+ /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
+ MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+ >;
+};
+
+&mmc1 {
+ vmmc-supply = <&vwlan2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
+};
+
+&mmc2 {
+ vmmc-supply = <&vsdio>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ vmmc-supply = <&wl12xx_vmmc>;
+ /* uart2_tx.sdmmc3_dat1 pad as wakeirq */
+ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0xde>;
+ interrupt-names = "irq", "wakeup";
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1285", "ti,wl1283";
+ reg = <2>;
+ /* gpio_100 with gpmc_wait2 pad as wakeirq */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap4_pmx_core 0x4e>;
+ interrupt-names = "irq", "wakeup";
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = ":kbd_backlight";
+ };
+ };
+};
+
+&i2c2 {
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */
+
+ /* gpio_183 with sys_nirq2 pad as wakeup */
+ interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>,
+ <&omap4_pmx_core 0x160>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+
+ isl29030@44 {
+ compatible = "isil,isl29030";
+ reg = <0x44>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&als_proximity_pins>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+ };
+};
+
+&omap4_pmx_core {
+
+ /* hdmi_hpd.gpio_63 */
+ hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
+ >;
+ };
+
+ /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /* gpmc_ncs0.gpio_50 */
+ poweroff_gpio: pinmux_poweroff_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ /* kpd_row0.gpio_178 */
+ tmp105_irq: pinmux_tmp105_irq {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
+ /* gpio_60 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ touchscreen_pins: pinmux_touchscreen_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ als_proximity_pins: pinmux_als_proximity_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
+ pinctrl-single,pins = <
+ /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+ /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+ /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+ /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+ /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+ /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+ /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ usb_ulpi_pins: pinmux_usb_ulpi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x196, MUX_MODE7)
+ OMAP4_IOPAD(0x198, MUX_MODE7)
+ OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ /* usb0_otg_dp and usb0_otg_dm */
+ usb_utmi_pins: pinmux_usb_utmi_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+ OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ /*
+ * Note that the v3.0.8 stock userspace dynamically remuxes uart1
+ * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
+ * when not used. If needed, we can add rts pin remux later based
+ * on power measurements.
+ */
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
+ OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+ /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
+ OMAP4_IOPAD(0x13e, MUX_MODE1)
+
+ /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
+ OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
+
+ /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
+ OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
+ >;
+ };
+
+ /* uart3_tx_irtx and uart3_rx_irrx */
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x196, MUX_MODE7)
+ OMAP4_IOPAD(0x198, MUX_MODE7)
+ OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1ba, MUX_MODE2)
+ OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+ OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */
+ OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */
+ OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */
+ >;
+ };
+
+ mcbsp3_pins: pinmux_mcbsp3_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */
+ OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */
+ OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */
+ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
+ >;
+ };
+
+ vibrator_direction_pin: pinmux_vibrator_direction_pin {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: pinmux_vibrator_enable_pin {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+ /* gpio_wk0 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+ assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+ assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+/*
+ * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
+ * uart1 wakeirq.
+ */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0xfc>;
+};
+
+&uart3 {
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+ &omap4_pmx_core 0x17c>;
+ overrun-throttle-ms = <500>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1285-st";
+ enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
+ max-speed = <3686400>;
+ };
+};
+
+&usbhsohci {
+ phys = <&fsusb1_phy>;
+ phy-names = "usb";
+};
+
+&usbhsehci {
+ phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+ port1-mode = "ohci-phy-4pin-dpdm";
+ port2-mode = "ehci-tll";
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&i2c4 {
+ ak8975: magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+ rotation-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+
+ };
+
+ lis3dh: accelerometer@18 {
+ compatible = "st,lis3dh-accel";
+ reg = <0x18>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
+
+ rotation-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
+&mcbsp2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+
+ mcbsp2_port: port {
+ cpu_dai2: endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&cpcap_audio_codec0>;
+ frame-master = <&cpcap_audio_codec0>;
+ bitclock-master = <&cpcap_audio_codec0>;
+ };
+ };
+};
+
+&mcbsp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+ status = "okay";
+
+ mcbsp3_port: port {
+ cpu_dai3: endpoint {
+ dai-format = "dsp_a";
+ frame-master = <&cpcap_audio_codec1>;
+ bitclock-master = <&cpcap_audio_codec1>;
+ remote-endpoint = <&cpcap_audio_codec1>;
+ };
+ };
+};
+
+&cpcap_audio_codec0 {
+ remote-endpoint = <&cpu_dai2>;
+};
+
+&cpcap_audio_codec1 {
+ remote-endpoint = <&cpu_dai3>;
+};