ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/boot/dts/stm32429i-eval.dts b/marvell/linux/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 0000000..4f45e71
--- /dev/null
+++ b/marvell/linux/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,316 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "STMicroelectronics STM32429i-EVAL board";
+ compatible = "st,stm32429i-eval", "st,stm32f429";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+
+ clocks {
+ clk_ext_camera: clk-ext-camera {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ dma-ranges = <0xc0000000 0x0 0x10000000>;
+ };
+
+ vdda: regulator-vdda {
+ compatible = "regulator-fixed";
+ regulator-name = "vdda";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vref: regulator-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ green {
+ gpios = <&gpiog 6 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ orange {
+ gpios = <&gpiog 7 1>;
+ };
+ red {
+ gpios = <&gpiog 10 1>;
+ };
+ blue {
+ gpios = <&gpiog 12 1>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ button-0 {
+ label = "Wake up";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpioa 0 0>;
+ };
+ button-1 {
+ label = "Tamper";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioc 13 0>;
+ };
+ };
+
+ usbotg_hs_phy: usbphy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+ clock-names = "main_clk";
+ };
+
+ panel_rgb: panel-rgb {
+ compatible = "ampire,am-480272h3tmqw-t01h";
+ status = "okay";
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
+
+ mmc_vcard: mmc_vcard {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc_vcard";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc3_in8_pin>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vref>;
+ status = "okay";
+ adc3: adc@200 {
+ st,adc-channels = <8>;
+ status = "okay";
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&crc {
+ status = "okay";
+};
+
+&dcmi {
+ status = "okay";
+
+ port {
+ dcmi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov2640: camera@30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+ pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+ clocks = <&clk_ext_camera>;
+ clock-names = "xvclk";
+ status = "okay";
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&dcmi_0>;
+ };
+ };
+ };
+
+ stmpe1600: stmpe1600@42 {
+ compatible = "st,stmpe1600";
+ reg = <0x42>;
+ interrupts = <8 3>;
+ interrupt-parent = <&gpioi>;
+ interrupt-controller;
+ wakeup-source;
+
+ stmpegpio: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+};
+
+&iwdg {
+ status = "okay";
+ timeout-sec = <32>;
+};
+
+<dc {
+ status = "okay";
+ pinctrl-0 = <<dc_pins>;
+ pinctrl-names = "default";
+ dma-ranges;
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-0 = <ðernet_mii>;
+ pinctrl-names = "default";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdio {
+ status = "okay";
+ vmmc-supply = <&mmc_vcard>;
+ cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "opendrain";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_pins_od>;
+ bus-width = <4>;
+ max-frequency = <12500000>;
+};
+
+&timers1 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@2 {
+ status = "okay";
+ };
+};
+
+&usart1 {
+ pinctrl-0 = <&usart1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};