ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/mach-davinci/serial.c b/marvell/linux/arch/arm/mach-davinci/serial.c
new file mode 100644
index 0000000..127b62c
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-davinci/serial.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI DaVinci serial driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/serial.h>
+#include <mach/cputype.h>
+
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+ int value)
+{
+ offset <<= p->regshift;
+
+ WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
+
+ __raw_writel(value, p->membase + offset);
+}
+
+static void __init davinci_serial_reset(struct plat_serial8250_port *p)
+{
+ unsigned int pwremu = 0;
+
+ serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
+
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+ mdelay(10);
+
+ pwremu |= (0x3 << 13);
+ pwremu |= 0x1;
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+ if (cpu_is_davinci_dm646x())
+ serial_write_reg(p, UART_DM646X_SCR,
+ UART_DM646X_SCR_TX_WATERMARK);
+}
+
+int __init davinci_serial_init(struct platform_device *serial_dev)
+{
+ int i, ret = 0;
+ struct device *dev;
+ struct plat_serial8250_port *p;
+ struct clk *clk;
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on if not needed.
+ */
+ for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
+ dev = &serial_dev[i].dev;
+ p = dev->platform_data;
+
+ ret = platform_device_register(&serial_dev[i]);
+ if (ret)
+ continue;
+
+ clk = clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ continue;
+ }
+
+ clk_prepare_enable(clk);
+
+ p->uartclk = clk_get_rate(clk);
+
+ if (!p->membase && p->mapbase) {
+ p->membase = ioremap(p->mapbase, SZ_4K);
+
+ if (p->membase)
+ p->flags &= ~UPF_IOREMAP;
+ else
+ pr_err("uart regs ioremap failed\n");
+ }
+
+ if (p->membase && p->type != PORT_AR7)
+ davinci_serial_reset(p);
+ }
+ return ret;
+}