ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/dma.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 0000000..40ca8de
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0 "uart0_tx"
+#define DMACH_UART0_SRC2 "uart0_rx"
+#define DMACH_UART1 "uart1_tx"
+#define DMACH_UART1_SRC2 "uart1_rx"
+#define DMACH_UART2 "uart2_tx"
+#define DMACH_UART2_SRC2 "uart2_rx"
+#define DMACH_UART3 "uart3_tx"
+#define DMACH_UART3_SRC2 "uart3_rx"
+#define DMACH_PCM0_TX "pcm0_tx"
+#define DMACH_PCM0_RX "pcm0_rx"
+#define DMACH_I2S0_OUT "i2s0_tx"
+#define DMACH_I2S0_IN "i2s0_rx"
+#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX "i2s2_tx"
+#define DMACH_HSI_I2SV40_RX "i2s2_rx"
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX "pcm1_tx"
+#define DMACH_PCM1_RX "pcm1_rx"
+#define DMACH_I2S1_OUT "i2s1_tx"
+#define DMACH_I2S1_IN "i2s1_rx"
+#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT "ac97_out"
+#define DMACH_AC97_PCMIN "ac97_in"
+#define DMACH_AC97_MICIN "ac97_mic"
+#define DMACH_PWM "pwm"
+#define DMACH_IRDA "irda"
+#define DMACH_EXTERNAL "external"
+#define DMACH_SECURITY_RX "sec_rx"
+#define DMACH_SECURITY_TX "sec_tx"
+
+enum dma_ch {
+ DMACH_MAX = 32
+};
+
+#include <linux/amba/pl08x.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
new file mode 100644
index 0000000..8ed144a
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ */
+
+#ifndef GPIO_SAMSUNG_S3C64XX_H
+#define GPIO_SAMSUNG_S3C64XX_H
+
+#ifdef CONFIG_GPIO_SAMSUNG
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR (8)
+#define S3C64XX_GPIO_B_NR (7)
+#define S3C64XX_GPIO_C_NR (8)
+#define S3C64XX_GPIO_D_NR (5)
+#define S3C64XX_GPIO_E_NR (5)
+#define S3C64XX_GPIO_F_NR (16)
+#define S3C64XX_GPIO_G_NR (7)
+#define S3C64XX_GPIO_H_NR (10)
+#define S3C64XX_GPIO_I_NR (16)
+#define S3C64XX_GPIO_J_NR (12)
+#define S3C64XX_GPIO_K_NR (16)
+#define S3C64XX_GPIO_L_NR (15)
+#define S3C64XX_GPIO_M_NR (6)
+#define S3C64XX_GPIO_N_NR (16)
+#define S3C64XX_GPIO_O_NR (16)
+#define S3C64XX_GPIO_P_NR (15)
+#define S3C64XX_GPIO_Q_NR (9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S3C64XX_GPIO_A_START = 0,
+ S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+ S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+ S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+ S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+ S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+ S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+ S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+ S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+ S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+ S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+ S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+ S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+ S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+ S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+ S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+ S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#endif /* GPIO_SAMSUNG */
+#endif /* GPIO_SAMSUNG_S3C64XX_H */
+
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/hardware.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/hardware.h
new file mode 100644
index 0000000..c4ed359
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/hardware.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/irqs.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
new file mode 100644
index 0000000..c244e48
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - IRQ support
+ */
+
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET (32)
+
+#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE S3C_IRQ(0)
+#define IRQ_VIC1_BASE S3C_IRQ(32)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
+#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1 IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
+
+#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S3C_EINT(x)
+#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR (15)
+#define IRQ_EINT_GROUP2_NR (8)
+#define IRQ_EINT_GROUP3_NR (5)
+#define IRQ_EINT_GROUP4_NR (14)
+#define IRQ_EINT_GROUP5_NR (7)
+#define IRQ_EINT_GROUP6_NR (10)
+#define IRQ_EINT_GROUP7_NR (16)
+#define IRQ_EINT_GROUP8_NR (15)
+#define IRQ_EINT_GROUP9_NR (9)
+
+#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Some boards have their own IRQs behind this */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
+
+/* Compatibility */
+
+#define IRQ_ONENAND IRQ_ONENAND0
+#define IRQ_I2S0 IRQ_S3C6410_IIS
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
+
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/map.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/map.h
new file mode 100644
index 0000000..9372a53
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART (0x7F005000)
+#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
+#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
+#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
+#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET (0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0 S3C_VA_UARTx(0)
+#define S3C_VA_UART1 S3C_VA_UARTx(1)
+#define S3C_VA_UART2 S3C_VA_UARTx(2)
+#define S3C_VA_UART3 S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM (0x70000000)
+
+#define S3C64XX_PA_ONENAND0 (0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF (0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+ (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1 (0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF (0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M)
+
+#define S3C64XX_PA_NAND (0x70200000)
+#define S3C64XX_PA_FB (0x77100000)
+#define S3C64XX_PA_USB_HSOTG (0x7C000000)
+#define S3C64XX_PA_WATCHDOG (0x7E004000)
+#define S3C64XX_PA_RTC (0x7E005000)
+#define S3C64XX_PA_KEYPAD (0x7E00A000)
+#define S3C64XX_PA_ADC (0x7E00B000)
+#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_AC97 (0x7F001000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
+#define S3C64XX_PA_TIMER (0x7F006000)
+#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_SPI0 (0x7F00B000)
+#define S3C64XX_PA_SPI1 (0x7F00C000)
+#define S3C64XX_PA_PCM0 (0x7F009000)
+#define S3C64XX_PA_PCM1 (0x7F00A000)
+#define S3C64XX_PA_IISV4 (0x7F00D000)
+#define S3C64XX_PA_IIC1 (0x7F00F000)
+
+#define S3C64XX_PA_GPIO (0x7F008000)
+#define S3C64XX_SZ_GPIO SZ_4K
+
+#define S3C64XX_PA_SDRAM (0x50000000)
+
+#define S3C64XX_PA_CFCON (0x70300000)
+
+#define S3C64XX_PA_VIC0 (0x71200000)
+#define S3C64XX_PA_VIC1 (0x71300000)
+
+#define S3C64XX_PA_MODEM (0x74108000)
+
+#define S3C64XX_PA_USBHOST (0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY (0x7C100000)
+
+/* compatibility defines. */
+#define S3C_PA_TIMER S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC S3C64XX_PA_IIC0
+#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_NAND S3C64XX_PA_NAND
+#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF
+#define S3C_PA_FB S3C64XX_PA_FB
+#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
+#define S3C_PA_RTC S3C64XX_PA_RTC
+#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0 S3C64XX_PA_SPI0
+#define S3C_PA_SPI1 S3C64XX_PA_SPI1
+
+#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER S3C64XX_PA_TIMER
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
new file mode 100644
index 0000000..bbf79ed
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#ifndef __MACH_S3C64XX_PM_CORE_H
+#define __MACH_S3C64XX_PM_CORE_H __FILE__
+
+#include <linux/serial_s3c.h>
+#include <linux/delay.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/map.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+ /* As a note, since the S3C64XX UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+
+ tmp |= S3C_CLKCON_PCLK_UART0;
+ tmp |= S3C_CLKCON_PCLK_UART1;
+ tmp |= S3C_CLKCON_PCLK_UART2;
+ tmp |= S3C_CLKCON_PCLK_UART3;
+
+ __raw_writel(tmp, S3C_PCLK_GATE);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_eintallow ((1 << 28) - 1)
+#define s3c_irqwake_intallow (~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow 0
+#endif
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ u32 ucon = __raw_readl(regs + S3C2410_UCON);
+ u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+ u32 new_ucon;
+ u32 delta;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+
+ __raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /* turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+
+ __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
+#endif /* __MACH_S3C64XX_PM_CORE_H */
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
new file mode 100644
index 0000000..35a6876
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ */
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+/*
+ * FIXME: Remove remaining definitions
+ */
+
+#define S3C_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S3C_PCLK_GATE S3C_CLKREG(0x34)
+#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
+
+/* PCLK GATE Registers */
+#define S3C_CLKCON_PCLK_UART3 (1<<4)
+#define S3C_CLKCON_PCLK_UART2 (1<<3)
+#define S3C_CLKCON_PCLK_UART1 (1<<2)
+#define S3C_CLKCON_PCLK_UART0 (1<<1)
+
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF 0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
new file mode 100644
index 0000000..592a2be
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180)
+
+/* SPCON */
+
+#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0)
+
+#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD (1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD (1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND (1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT (0)
+#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0)
+
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x) (1 << (x))
+
+#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924)
+
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0)
+
+
+#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP (1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
new file mode 100644
index 0000000..b18c7bc
--- /dev/null
+++ b/marvell/linux/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ */
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */