diff --git a/marvell/linux/arch/arm/mm/cache-l2x0-pmu.c b/marvell/linux/arch/arm/mm/cache-l2x0-pmu.c
new file mode 100644
index 0000000..993fefd
--- /dev/null
+++ b/marvell/linux/arch/arm/mm/cache-l2x0-pmu.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * L220/L310 cache controller support
+ *
+ * Copyright (C) 2016 ARM Limited
+ */
+#include <linux/errno.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#define PMU_NR_COUNTERS 2
+
+static void __iomem *l2x0_base;
+static struct pmu *l2x0_pmu;
+static cpumask_t pmu_cpu;
+
+static const char *l2x0_name;
+
+static ktime_t l2x0_pmu_poll_period;
+static struct hrtimer l2x0_pmu_hrtimer;
+
+/*
+ * The L220/PL310 PMU has two equivalent counters, Counter1 and Counter0.
+ * Registers controlling these are laid out in pairs, in descending order, i.e.
+ * the register for Counter1 comes first, followed by the register for
+ * Counter0.
+ * We ensure that idx 0 -> Counter0, and idx1 -> Counter1.
+ */
+static struct perf_event *events[PMU_NR_COUNTERS];
+
+/* Find an unused counter */
+static int l2x0_pmu_find_idx(void)
+{
+	int i;
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (!events[i])
+			return i;
+	}
+
+	return -1;
+}
+
+/* How many counters are allocated? */
+static int l2x0_pmu_num_active_counters(void)
+{
+	int i, cnt = 0;
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			cnt++;
+	}
+
+	return cnt;
+}
+
+static void l2x0_pmu_counter_config_write(int idx, u32 val)
+{
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_CFG - 4 * idx);
+}
+
+static u32 l2x0_pmu_counter_read(int idx)
+{
+	return readl_relaxed(l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx);
+}
+
+static void l2x0_pmu_counter_write(int idx, u32 val)
+{
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx);
+}
+
+static void __l2x0_pmu_enable(void)
+{
+	u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL);
+	val |= L2X0_EVENT_CNT_CTRL_ENABLE;
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL);
+}
+
+static void __l2x0_pmu_disable(void)
+{
+	u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL);
+	val &= ~L2X0_EVENT_CNT_CTRL_ENABLE;
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL);
+}
+
+static void l2x0_pmu_enable(struct pmu *pmu)
+{
+	if (l2x0_pmu_num_active_counters() == 0)
+		return;
+
+	__l2x0_pmu_enable();
+}
+
+static void l2x0_pmu_disable(struct pmu *pmu)
+{
+	if (l2x0_pmu_num_active_counters() == 0)
+		return;
+
+	__l2x0_pmu_disable();
+}
+
+static void warn_if_saturated(u32 count)
+{
+	if (count != 0xffffffff)
+		return;
+
+	pr_warn_ratelimited("L2X0 counter saturated. Poll period too long\n");
+}
+
+static void l2x0_pmu_event_read(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+	u64 prev_count, new_count, mask;
+
+	do {
+		 prev_count = local64_read(&hw->prev_count);
+		 new_count = l2x0_pmu_counter_read(hw->idx);
+	} while (local64_xchg(&hw->prev_count, new_count) != prev_count);
+
+	mask = GENMASK_ULL(31, 0);
+	local64_add((new_count - prev_count) & mask, &event->count);
+
+	warn_if_saturated(new_count);
+}
+
+static void l2x0_pmu_event_configure(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	/*
+	 * The L2X0 counters saturate at 0xffffffff rather than wrapping, so we
+	 * will *always* lose some number of events when a counter saturates,
+	 * and have no way of detecting how many were lost.
+	 *
+	 * To minimize the impact of this, we try to maximize the period by
+	 * always starting counters at zero. To ensure that group ratios are
+	 * representative, we poll periodically to avoid counters saturating.
+	 * See l2x0_pmu_poll().
+	 */
+	local64_set(&hw->prev_count, 0);
+	l2x0_pmu_counter_write(hw->idx, 0);
+}
+
+static enum hrtimer_restart l2x0_pmu_poll(struct hrtimer *hrtimer)
+{
+	unsigned long flags;
+	int i;
+
+	local_irq_save(flags);
+	__l2x0_pmu_disable();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		struct perf_event *event = events[i];
+
+		if (!event)
+			continue;
+
+		l2x0_pmu_event_read(event);
+		l2x0_pmu_event_configure(event);
+	}
+
+	__l2x0_pmu_enable();
+	local_irq_restore(flags);
+
+	hrtimer_forward_now(hrtimer, l2x0_pmu_poll_period);
+	return HRTIMER_RESTART;
+}
+
+
+static void __l2x0_pmu_event_enable(int idx, u32 event)
+{
+	u32 val;
+
+	val = event << L2X0_EVENT_CNT_CFG_SRC_SHIFT;
+	val |= L2X0_EVENT_CNT_CFG_INT_DISABLED;
+	l2x0_pmu_counter_config_write(idx, val);
+}
+
+static void l2x0_pmu_event_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(hw->state & PERF_HES_UPTODATE));
+		l2x0_pmu_event_configure(event);
+	}
+
+	hw->state = 0;
+
+	__l2x0_pmu_event_enable(hw->idx, hw->config_base);
+}
+
+static void __l2x0_pmu_event_disable(int idx)
+{
+	u32 val;
+
+	val = L2X0_EVENT_CNT_CFG_SRC_DISABLED << L2X0_EVENT_CNT_CFG_SRC_SHIFT;
+	val |= L2X0_EVENT_CNT_CFG_INT_DISABLED;
+	l2x0_pmu_counter_config_write(idx, val);
+}
+
+static void l2x0_pmu_event_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(event->hw.state & PERF_HES_STOPPED))
+		return;
+
+	__l2x0_pmu_event_disable(hw->idx);
+
+	hw->state |= PERF_HES_STOPPED;
+
+	if (flags & PERF_EF_UPDATE) {
+		l2x0_pmu_event_read(event);
+		hw->state |= PERF_HES_UPTODATE;
+	}
+}
+
+static int l2x0_pmu_event_add(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+	int idx = l2x0_pmu_find_idx();
+
+	if (idx == -1)
+		return -EAGAIN;
+
+	/*
+	 * Pin the timer, so that the overflows are handled by the chosen
+	 * event->cpu (this is the same one as presented in "cpumask"
+	 * attribute).
+	 */
+	if (l2x0_pmu_num_active_counters() == 0)
+		hrtimer_start(&l2x0_pmu_hrtimer, l2x0_pmu_poll_period,
+			      HRTIMER_MODE_REL_PINNED);
+
+	events[idx] = event;
+	hw->idx = idx;
+
+	l2x0_pmu_event_configure(event);
+
+	hw->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+	if (flags & PERF_EF_START)
+		l2x0_pmu_event_start(event, 0);
+
+	return 0;
+}
+
+static void l2x0_pmu_event_del(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	l2x0_pmu_event_stop(event, PERF_EF_UPDATE);
+
+	events[hw->idx] = NULL;
+	hw->idx = -1;
+
+	if (l2x0_pmu_num_active_counters() == 0)
+		hrtimer_cancel(&l2x0_pmu_hrtimer);
+}
+
+static bool l2x0_pmu_group_is_valid(struct perf_event *event)
+{
+	struct pmu *pmu = event->pmu;
+	struct perf_event *leader = event->group_leader;
+	struct perf_event *sibling;
+	int num_hw = 0;
+
+	if (leader->pmu == pmu)
+		num_hw++;
+	else if (!is_software_event(leader))
+		return false;
+
+	for_each_sibling_event(sibling, leader) {
+		if (sibling->pmu == pmu)
+			num_hw++;
+		else if (!is_software_event(sibling))
+			return false;
+	}
+
+	return num_hw <= PMU_NR_COUNTERS;
+}
+
+static int l2x0_pmu_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (event->attr.type != l2x0_pmu->type)
+		return -ENOENT;
+
+	if (is_sampling_event(event) ||
+	    event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	if (event->cpu < 0)
+		return -EINVAL;
+
+	if (event->attr.config & ~L2X0_EVENT_CNT_CFG_SRC_MASK)
+		return -EINVAL;
+
+	hw->config_base = event->attr.config;
+
+	if (!l2x0_pmu_group_is_valid(event))
+		return -EINVAL;
+
+	event->cpu = cpumask_first(&pmu_cpu);
+
+	return 0;
+}
+
+struct l2x0_event_attribute {
+	struct device_attribute attr;
+	unsigned int config;
+	bool pl310_only;
+};
+
+#define L2X0_EVENT_ATTR(_name, _config, _pl310_only)				\
+	(&((struct l2x0_event_attribute[]) {{					\
+		.attr = __ATTR(_name, S_IRUGO, l2x0_pmu_event_show, NULL),	\
+		.config = _config,						\
+		.pl310_only = _pl310_only,					\
+	}})[0].attr.attr)
+
+#define L220_PLUS_EVENT_ATTR(_name, _config)					\
+	L2X0_EVENT_ATTR(_name, _config, false)
+
+#define PL310_EVENT_ATTR(_name, _config)					\
+	L2X0_EVENT_ATTR(_name, _config, true)
+
+static ssize_t l2x0_pmu_event_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct l2x0_event_attribute *lattr;
+
+	lattr = container_of(attr, typeof(*lattr), attr);
+	return snprintf(buf, PAGE_SIZE, "config=0x%x\n", lattr->config);
+}
+
+static umode_t l2x0_pmu_event_attr_is_visible(struct kobject *kobj,
+					      struct attribute *attr,
+					      int unused)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pmu *pmu = dev_get_drvdata(dev);
+	struct l2x0_event_attribute *lattr;
+
+	lattr = container_of(attr, typeof(*lattr), attr.attr);
+
+	if (!lattr->pl310_only || strcmp("l2c_310", pmu->name) == 0)
+		return attr->mode;
+
+	return 0;
+}
+
+static struct attribute *l2x0_pmu_event_attrs[] = {
+	L220_PLUS_EVENT_ATTR(co,	0x1),
+	L220_PLUS_EVENT_ATTR(drhit,	0x2),
+	L220_PLUS_EVENT_ATTR(drreq,	0x3),
+	L220_PLUS_EVENT_ATTR(dwhit,	0x4),
+	L220_PLUS_EVENT_ATTR(dwreq,	0x5),
+	L220_PLUS_EVENT_ATTR(dwtreq,	0x6),
+	L220_PLUS_EVENT_ATTR(irhit,	0x7),
+	L220_PLUS_EVENT_ATTR(irreq,	0x8),
+	L220_PLUS_EVENT_ATTR(wa,	0x9),
+	PL310_EVENT_ATTR(ipfalloc,	0xa),
+	PL310_EVENT_ATTR(epfhit,	0xb),
+	PL310_EVENT_ATTR(epfalloc,	0xc),
+	PL310_EVENT_ATTR(srrcvd,	0xd),
+	PL310_EVENT_ATTR(srconf,	0xe),
+	PL310_EVENT_ATTR(epfrcvd,	0xf),
+	NULL
+};
+
+static struct attribute_group l2x0_pmu_event_attrs_group = {
+	.name = "events",
+	.attrs = l2x0_pmu_event_attrs,
+	.is_visible = l2x0_pmu_event_attr_is_visible,
+};
+
+static ssize_t l2x0_pmu_cpumask_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return cpumap_print_to_pagebuf(true, buf, &pmu_cpu);
+}
+
+static struct device_attribute l2x0_pmu_cpumask_attr =
+		__ATTR(cpumask, S_IRUGO, l2x0_pmu_cpumask_show, NULL);
+
+static struct attribute *l2x0_pmu_cpumask_attrs[] = {
+	&l2x0_pmu_cpumask_attr.attr,
+	NULL,
+};
+
+static struct attribute_group l2x0_pmu_cpumask_attr_group = {
+	.attrs = l2x0_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *l2x0_pmu_attr_groups[] = {
+	&l2x0_pmu_event_attrs_group,
+	&l2x0_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static void l2x0_pmu_reset(void)
+{
+	int i;
+
+	__l2x0_pmu_disable();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++)
+		__l2x0_pmu_event_disable(i);
+}
+
+static int l2x0_pmu_offline_cpu(unsigned int cpu)
+{
+	unsigned int target;
+
+	if (!cpumask_test_and_clear_cpu(cpu, &pmu_cpu))
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	perf_pmu_migrate_context(l2x0_pmu, cpu, target);
+	cpumask_set_cpu(target, &pmu_cpu);
+
+	return 0;
+}
+
+void l2x0_pmu_suspend(void)
+{
+	int i;
+
+	if (!l2x0_pmu)
+		return;
+
+	l2x0_pmu_disable(l2x0_pmu);
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			l2x0_pmu_event_stop(events[i], PERF_EF_UPDATE);
+	}
+
+}
+
+void l2x0_pmu_resume(void)
+{
+	int i;
+
+	if (!l2x0_pmu)
+		return;
+
+	l2x0_pmu_reset();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			l2x0_pmu_event_start(events[i], PERF_EF_RELOAD);
+	}
+
+	l2x0_pmu_enable(l2x0_pmu);
+}
+
+void __init l2x0_pmu_register(void __iomem *base, u32 part)
+{
+	/*
+	 * Determine whether we support the PMU, and choose the name for sysfs.
+	 * This is also used by l2x0_pmu_event_attr_is_visible to determine
+	 * which events to display, as the PL310 PMU supports a superset of
+	 * L220 events.
+	 *
+	 * The L210 PMU has a different programmer's interface, and is not
+	 * supported by this driver.
+	 *
+	 * We must defer registering the PMU until the perf subsystem is up and
+	 * running, so just stash the name and base, and leave that to another
+	 * initcall.
+	 */
+	switch (part & L2X0_CACHE_ID_PART_MASK) {
+	case L2X0_CACHE_ID_PART_L220:
+		l2x0_name = "l2c_220";
+		break;
+	case L2X0_CACHE_ID_PART_L310:
+		l2x0_name = "l2c_310";
+		break;
+	default:
+		return;
+	}
+
+	l2x0_base = base;
+}
+
+static __init int l2x0_pmu_init(void)
+{
+	int ret;
+
+	if (!l2x0_base)
+		return 0;
+
+	l2x0_pmu = kzalloc(sizeof(*l2x0_pmu), GFP_KERNEL);
+	if (!l2x0_pmu) {
+		pr_warn("Unable to allocate L2x0 PMU\n");
+		return -ENOMEM;
+	}
+
+	*l2x0_pmu = (struct pmu) {
+		.task_ctx_nr = perf_invalid_context,
+		.pmu_enable = l2x0_pmu_enable,
+		.pmu_disable = l2x0_pmu_disable,
+		.read = l2x0_pmu_event_read,
+		.start = l2x0_pmu_event_start,
+		.stop = l2x0_pmu_event_stop,
+		.add = l2x0_pmu_event_add,
+		.del = l2x0_pmu_event_del,
+		.event_init = l2x0_pmu_event_init,
+		.attr_groups = l2x0_pmu_attr_groups,
+		.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+	};
+
+	l2x0_pmu_reset();
+
+	/*
+	 * We always use a hrtimer rather than an interrupt.
+	 * See comments in l2x0_pmu_event_configure and l2x0_pmu_poll.
+	 *
+	 * Polling once a second allows the counters to fill up to 1/128th on a
+	 * quad-core test chip with cores clocked at 400MHz. Hopefully this
+	 * leaves sufficient headroom to avoid overflow on production silicon
+	 * at higher frequencies.
+	 */
+	l2x0_pmu_poll_period = ms_to_ktime(1000);
+	hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	l2x0_pmu_hrtimer.function = l2x0_pmu_poll;
+
+	cpumask_set_cpu(0, &pmu_cpu);
+	ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE,
+					"perf/arm/l2x0:online", NULL,
+					l2x0_pmu_offline_cpu);
+	if (ret)
+		goto out_pmu;
+
+	ret = perf_pmu_register(l2x0_pmu, l2x0_name, -1);
+	if (ret)
+		goto out_cpuhp;
+
+	return 0;
+
+out_cpuhp:
+	cpuhp_remove_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE);
+out_pmu:
+	kfree(l2x0_pmu);
+	l2x0_pmu = NULL;
+	return ret;
+}
+device_initcall(l2x0_pmu_init);