ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/m68k/coldfire/intc-simr.c b/marvell/linux/arch/m68k/coldfire/intc-simr.c
new file mode 100644
index 0000000..15c4b7a
--- /dev/null
+++ b/marvell/linux/arch/m68k/coldfire/intc-simr.c
@@ -0,0 +1,199 @@
+/*
+ * intc-simr.c
+ *
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The EDGE Port interrupts are the fixed 7 external interrupts.
+ * They need some special treatment, for example they need to be acked.
+ */
+#ifdef CONFIG_M520x
+/*
+ * The 520x parts only support a limited range of these external
+ * interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
+ */
+#define EINT0 64 /* Is not actually used, but spot reserved for it */
+#define EINT1 65 /* EDGE Port interrupt 1 */
+#define EINT4 66 /* EDGE Port interrupt 4 */
+#define EINT7 67 /* EDGE Port interrupt 7 */
+
+static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
+static inline unsigned int irq2ebit(unsigned int irq)
+{
+ return irqebitmap[irq - EINT0];
+}
+
+#else
+
+/*
+ * Most of the ColdFire parts with the EDGE Port module just have
+ * a strait direct mapping of the 7 external interrupts. Although
+ * there is a bit reserved for 0, it is not used.
+ */
+#define EINT0 64 /* Is not actually used, but spot reserved for it */
+#define EINT1 65 /* EDGE Port interrupt 1 */
+#define EINT7 71 /* EDGE Port interrupt 7 */
+
+static inline unsigned int irq2ebit(unsigned int irq)
+{
+ return irq - EINT0;
+}
+
+#endif
+
+/*
+ * There maybe one, two or three interrupt control units, each has 64
+ * interrupts. If there is no second or third unit then MCFINTC1_* or
+ * MCFINTC2_* defines will be 0 (and code for them optimized away).
+ */
+
+static void intc_irq_mask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+
+ if (MCFINTC2_SIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_SIMR);
+ else if (MCFINTC1_SIMR && (irq > 64))
+ __raw_writeb(irq - 64, MCFINTC1_SIMR);
+ else
+ __raw_writeb(irq, MCFINTC0_SIMR);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+
+ if (MCFINTC2_CIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_CIMR);
+ else if (MCFINTC1_CIMR && (irq > 64))
+ __raw_writeb(irq - 64, MCFINTC1_CIMR);
+ else
+ __raw_writeb(irq, MCFINTC0_CIMR);
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+ unsigned int ebit = irq2ebit(d->irq);
+
+ __raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
+}
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= EINT1) && (irq <= EINT7)) {
+ unsigned int ebit = irq2ebit(irq);
+ u8 v;
+
+#if defined(MCFEPORT_EPDDR)
+ /* Set EPORT line as input */
+ v = __raw_readb(MCFEPORT_EPDDR);
+ __raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
+
+ /* Set EPORT line as interrupt source */
+ v = __raw_readb(MCFEPORT_EPIER);
+ __raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
+ }
+
+ irq -= MCFINT_VECBASE;
+ if (MCFINTC2_ICR0 && (irq > 128))
+ __raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+ else if (MCFINTC1_ICR0 && (irq > 64))
+ __raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
+ else
+ __raw_writeb(5, MCFINTC0_ICR0 + irq);
+
+ intc_irq_unmask(d);
+ return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int ebit, irq = d->irq;
+ u16 pa, tb;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ tb = 0x1;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ tb = 0x2;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ tb = 0x3;
+ break;
+ default:
+ /* Level triggered */
+ tb = 0;
+ break;
+ }
+
+ if (tb)
+ irq_set_handler(irq, handle_edge_irq);
+
+ ebit = irq2ebit(irq) * 2;
+ pa = __raw_readw(MCFEPORT_EPPAR);
+ pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
+ __raw_writew(pa, MCFEPORT_EPPAR);
+
+ return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "CF-INTC",
+ .irq_startup = intc_irq_startup,
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+ .name = "CF-INTC-EP",
+ .irq_startup = intc_irq_startup,
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_ack = intc_irq_ack,
+ .irq_set_type = intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+ int irq, eirq;
+
+ /* Mask all interrupt sources */
+ __raw_writeb(0xff, MCFINTC0_SIMR);
+ if (MCFINTC1_SIMR)
+ __raw_writeb(0xff, MCFINTC1_SIMR);
+ if (MCFINTC2_SIMR)
+ __raw_writeb(0xff, MCFINTC2_SIMR);
+
+ eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+ (MCFINTC2_ICR0 ? 64 : 0);
+ for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
+ if ((irq >= EINT1) && (irq <= EINT7))
+ irq_set_chip(irq, &intc_irq_chip_edge_port);
+ else
+ irq_set_chip(irq, &intc_irq_chip);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_handler(irq, handle_level_irq);
+ }
+}
+