ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/m68k/include/asm/io_no.h b/marvell/linux/arch/m68k/include/asm/io_no.h
new file mode 100644
index 0000000..0498192
--- /dev/null
+++ b/marvell/linux/arch/m68k/include/asm/io_no.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+/*
+ * Convert a physical memory address into a IO memory address.
+ * For us this is trivially a type cast.
+ */
+#define iomem(a) ((void __iomem *) (a))
+
+/*
+ * The non-MMU m68k and ColdFire IO and memory mapped hardware access
+ * functions have always worked in CPU native endian. We need to define
+ * that behavior here first before we include asm-generic/io.h.
+ */
+#define __raw_readb(addr) \
+ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define __raw_readw(addr) \
+ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define __raw_readl(addr) \
+ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#if defined(CONFIG_COLDFIRE)
+/*
+ * For ColdFire platforms we may need to do some extra checks for what
+ * type of address range we are accessing. Include the ColdFire platform
+ * definitions so we can figure out if need to do something special.
+ */
+#include <asm/byteorder.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif /* CONFIG_COLDFIRE */
+
+#if defined(IOMEMBASE)
+/*
+ * The ColdFire SoC internal peripherals are mapped into virtual address
+ * space using the ACR registers of the cache control unit. This means we
+ * are using a 1:1 physical:virtual mapping for them. We can quickly
+ * determine if we are accessing an internal peripheral device given the
+ * physical or vitrual address using the same range check. This check logic
+ * applies just the same of there is no MMU but something like a PCI bus
+ * is present.
+ */
+static int __cf_internalio(unsigned long addr)
+{
+ return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1);
+}
+
+static int cf_internalio(const volatile void __iomem *addr)
+{
+ return __cf_internalio((unsigned long) addr);
+}
+
+/*
+ * We need to treat built-in peripherals and bus based address ranges
+ * differently. Local built-in peripherals (and the ColdFire SoC parts
+ * have quite a lot of them) are always native endian - which is big
+ * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus,
+ * are accessed little endian - so we need to byte swap those.
+ */
+#define readw readw
+static inline u16 readw(const volatile void __iomem *addr)
+{
+ if (cf_internalio(addr))
+ return __raw_readw(addr);
+ return __le16_to_cpu(__raw_readw(addr));
+}
+
+#define readl readl
+static inline u32 readl(const volatile void __iomem *addr)
+{
+ if (cf_internalio(addr))
+ return __raw_readl(addr);
+ return __le32_to_cpu(__raw_readl(addr));
+}
+
+#define writew writew
+static inline void writew(u16 value, volatile void __iomem *addr)
+{
+ if (cf_internalio(addr))
+ __raw_writew(value, addr);
+ else
+ __raw_writew(__cpu_to_le16(value), addr);
+}
+
+#define writel writel
+static inline void writel(u32 value, volatile void __iomem *addr)
+{
+ if (cf_internalio(addr))
+ __raw_writel(value, addr);
+ else
+ __raw_writel(__cpu_to_le32(value), addr);
+}
+
+#else
+
+#define readb __raw_readb
+#define readw __raw_readw
+#define readl __raw_readl
+#define writeb __raw_writeb
+#define writew __raw_writew
+#define writel __raw_writel
+
+#endif /* IOMEMBASE */
+
+#if defined(CONFIG_PCI)
+/*
+ * Support for PCI bus access uses the asm-generic access functions.
+ * We need to supply the base address and masks for the normal memory
+ * and IO address space mappings.
+ */
+#define PCI_MEM_PA 0xf0000000 /* Host physical address */
+#define PCI_MEM_BA 0xf0000000 /* Bus physical address */
+#define PCI_MEM_SIZE 0x08000000 /* 128 MB */
+#define PCI_MEM_MASK (PCI_MEM_SIZE - 1)
+
+#define PCI_IO_PA 0xf8000000 /* Host physical address */
+#define PCI_IO_BA 0x00000000 /* Bus physical address */
+#define PCI_IO_SIZE 0x00010000 /* 64k */
+#define PCI_IO_MASK (PCI_IO_SIZE - 1)
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET 0
+#define PIO_MASK 0xffff
+#define PIO_RESERVED 0x10000
+#define PCI_IOBASE ((void __iomem *) PCI_IO_PA)
+#define PCI_SPACE_LIMIT PCI_IO_MASK
+#endif /* CONFIG_PCI */
+
+#include <asm/kmap.h>
+#include <asm/virtconvert.h>
+
+#endif /* _M68KNOMMU_IO_H */