ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/mips/alchemy/common/platform.c b/marvell/linux/arch/mips/alchemy/common/platform.c
new file mode 100644
index 0000000..b8f3397
--- /dev/null
+++ b/marvell/linux/arch/mips/alchemy/common/platform.c
@@ -0,0 +1,458 @@
+/*
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#include <prom.h>
+
+static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int old_state)
+{
+#ifdef CONFIG_SERIAL_8250
+ switch (state) {
+ case 0:
+ alchemy_uart_enable(CPHYSADDR(port->membase));
+ serial8250_do_pm(port, state, old_state);
+ break;
+ case 3: /* power off */
+ serial8250_do_pm(port, state, old_state);
+ alchemy_uart_disable(CPHYSADDR(port->membase));
+ break;
+ default:
+ serial8250_do_pm(port, state, old_state);
+ break;
+ }
+#endif
+}
+
+#define PORT(_base, _irq) \
+ { \
+ .mapbase = _base, \
+ .irq = _irq, \
+ .regshift = 2, \
+ .iotype = UPIO_AU, \
+ .flags = UPF_SKIP_TEST | UPF_IOREMAP | \
+ UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ .pm = alchemy_8250_pm, \
+ }
+
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1200] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+ },
+ [ALCHEMY_CPU_AU1300] = {
+ PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+ PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+ PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+ PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+ },
+};
+
+static struct platform_device au1xx0_uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_AU1X00,
+};
+
+static void __init alchemy_setup_uarts(int ctype)
+{
+ long uartclk;
+ int s = sizeof(struct plat_serial8250_port);
+ int c = alchemy_get_uarts(ctype);
+ struct plat_serial8250_port *ports;
+ struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK);
+
+ if (IS_ERR(clk))
+ return;
+ if (clk_prepare_enable(clk)) {
+ clk_put(clk);
+ return;
+ }
+ uartclk = clk_get_rate(clk);
+ clk_put(clk);
+
+ ports = kcalloc(s, (c + 1), GFP_KERNEL);
+ if (!ports) {
+ printk(KERN_INFO "Alchemy: no memory for UART data\n");
+ return;
+ }
+ memcpy(ports, au1x00_uart_data[ctype], s * c);
+ au1xx0_uart_device.dev.platform_data = ports;
+
+ /* Fill up uartclk. */
+ for (s = 0; s < c; s++)
+ ports[s].uartclk = uartclk;
+ if (platform_device_register(&au1xx0_uart_device))
+ printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
+
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
+
+/* Power on callback for the ehci platform driver */
+static int alchemy_ehci_power_on(struct platform_device *pdev)
+{
+ return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
+}
+
+/* Power off/suspend callback for the ehci platform driver */
+static void alchemy_ehci_power_off(struct platform_device *pdev)
+{
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+}
+
+static struct usb_ehci_pdata alchemy_ehci_pdata = {
+ .no_io_watchdog = 1,
+ .power_on = alchemy_ehci_power_on,
+ .power_off = alchemy_ehci_power_off,
+ .power_suspend = alchemy_ehci_power_off,
+};
+
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+ int unit;
+
+ unit = (pdev->id == 1) ?
+ ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+ return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+ int unit;
+
+ unit = (pdev->id == 1) ?
+ ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+ alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+ .power_on = alchemy_ohci_power_on,
+ .power_off = alchemy_ohci_power_off,
+ .power_suspend = alchemy_ohci_power_off,
+};
+
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+ [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+ [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+ [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+ [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+ *r = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+ if (!*r)
+ return -ENOMEM;
+ *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if (!*d) {
+ kfree(*r);
+ return -ENOMEM;
+ }
+
+ (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ (*d)->num_resources = 2;
+ (*d)->resource = *r;
+
+ return 0;
+}
+
+static void __init alchemy_setup_usb(int ctype)
+{
+ struct resource *res;
+ struct platform_device *pdev;
+
+ /* setup OHCI0. Every variant has one */
+ if (_new_usbres(&res, &pdev))
+ return;
+
+ res[0].start = alchemy_ohci_data[ctype][0];
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = alchemy_ohci_data[ctype][1];
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "ohci-platform";
+ pdev->id = 0;
+ pdev->dev.dma_mask = &alchemy_all_dmamask;
+ pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
+
+
+ /* setup EHCI0: Au1200/Au1300 */
+ if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
+ if (_new_usbres(&res, &pdev))
+ return;
+
+ res[0].start = alchemy_ehci_data[ctype][0];
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = alchemy_ehci_data[ctype][1];
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "ehci-platform";
+ pdev->id = 0;
+ pdev->dev.dma_mask = &alchemy_all_dmamask;
+ pdev->dev.platform_data = &alchemy_ehci_pdata;
+
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
+ }
+
+ /* Au1300: OHCI1 */
+ if (ctype == ALCHEMY_CPU_AU1300) {
+ if (_new_usbres(&res, &pdev))
+ return;
+
+ res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = AU1300_USB_INT;
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "ohci-platform";
+ pdev->id = 1;
+ pdev->dev.dma_mask = &alchemy_all_dmamask;
+ pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+ }
+}
+
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma) \
+ { \
+ .start = _base, \
+ .end = _base + 0xffff, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = _enable, \
+ .end = _enable + 0x3, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ }, \
+ { \
+ .start = _macdma, \
+ .end = _macdma + 0x1ff, \
+ .flags = IORESOURCE_MEM, \
+ }
+
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1000_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ MAC_RES(AU1500_MAC0_PHYS_ADDR,
+ AU1500_MACEN_PHYS_ADDR,
+ AU1500_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1100_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ MAC_RES(AU1000_MAC0_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR,
+ AU1550_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
+ },
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+ .name = "au1000-eth",
+ .id = 0,
+ .num_resources = MAC_RES_COUNT,
+ .dev = {
+ .dma_mask = &alchemy_all_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &au1xxx_eth0_platform_data,
+ },
+};
+
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ MAC_RES(AU1000_MAC1_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR + 4,
+ AU1000_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ MAC_RES(AU1500_MAC1_PHYS_ADDR,
+ AU1500_MACEN_PHYS_ADDR + 4,
+ AU1500_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ MAC_RES(AU1000_MAC1_PHYS_ADDR,
+ AU1000_MACEN_PHYS_ADDR + 4,
+ AU1550_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
+ },
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+ .name = "au1000-eth",
+ .id = 1,
+ .num_resources = MAC_RES_COUNT,
+ .dev = {
+ .dma_mask = &alchemy_all_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &au1xxx_eth1_platform_data,
+ },
+};
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+ struct au1000_eth_platform_data *eth_data)
+{
+ if (!eth_data || port > 1)
+ return;
+
+ if (port == 0)
+ memcpy(&au1xxx_eth0_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+ else
+ memcpy(&au1xxx_eth1_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+ int ret, i;
+ unsigned char ethaddr[6];
+ struct resource *macres;
+
+ /* Handle 1st MAC */
+ if (alchemy_get_macs(ctype) < 1)
+ return;
+
+ macres = kmemdup(au1xxx_eth0_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ if (!macres) {
+ printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+ return;
+ }
+ au1xxx_eth0_device.resource = macres;
+
+ i = prom_get_ethernet_addr(ethaddr);
+ if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+ memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+ ret = platform_device_register(&au1xxx_eth0_device);
+ if (ret)
+ printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+ /* Handle 2nd MAC */
+ if (alchemy_get_macs(ctype) < 2)
+ return;
+
+ macres = kmemdup(au1xxx_eth1_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ if (!macres) {
+ printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+ return;
+ }
+ au1xxx_eth1_device.resource = macres;
+
+ ethaddr[5] += 1; /* next addr for 2nd MAC */
+ if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+ memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+ /* Register second MAC if enabled in pinfunc */
+ if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) {
+ ret = platform_device_register(&au1xxx_eth1_device);
+ if (ret)
+ printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+ }
+}
+
+static int __init au1xxx_platform_init(void)
+{
+ int ctype = alchemy_get_cputype();
+
+ alchemy_setup_uarts(ctype);
+ alchemy_setup_macs(ctype);
+ alchemy_setup_usb(ctype);
+
+ return 0;
+}
+
+arch_initcall(au1xxx_platform_init);