ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1000.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1000.h
new file mode 100644
index 0000000..a7eec33
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -0,0 +1,1211 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2000-2001, 2006-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+ * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
+ */
+
+#ifndef _AU1000_H_
+#define _AU1000_H_
+
+/* SOC Interrupt numbers */
+/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
+#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
+
+/* Au1300-style (GPIC): 1 controller with up to 128 sources */
+#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define ALCHEMY_GPIC_INT_NUM 128
+#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
+
+/* common clock names, shared among all variants. AUXPLL2 is Au1300 */
+#define ALCHEMY_ROOT_CLK "root_clk"
+#define ALCHEMY_CPU_CLK "cpu_clk"
+#define ALCHEMY_AUXPLL_CLK "auxpll_clk"
+#define ALCHEMY_AUXPLL2_CLK "auxpll2_clk"
+#define ALCHEMY_SYSBUS_CLK "sysbus_clk"
+#define ALCHEMY_PERIPH_CLK "periph_clk"
+#define ALCHEMY_MEM_CLK "mem_clk"
+#define ALCHEMY_LR_CLK "lr_clk"
+#define ALCHEMY_FG0_CLK "fg0_clk"
+#define ALCHEMY_FG1_CLK "fg1_clk"
+#define ALCHEMY_FG2_CLK "fg2_clk"
+#define ALCHEMY_FG3_CLK "fg3_clk"
+#define ALCHEMY_FG4_CLK "fg4_clk"
+#define ALCHEMY_FG5_CLK "fg5_clk"
+
+/* Au1300 peripheral interrupt numbers */
+#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE)
+#define AU1300_UART1_INT (AU1300_FIRST_INT + 17)
+#define AU1300_UART2_INT (AU1300_FIRST_INT + 25)
+#define AU1300_UART3_INT (AU1300_FIRST_INT + 27)
+#define AU1300_SD1_INT (AU1300_FIRST_INT + 32)
+#define AU1300_SD2_INT (AU1300_FIRST_INT + 38)
+#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48)
+#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52)
+#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56)
+#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60)
+#define AU1300_NAND_INT (AU1300_FIRST_INT + 62)
+#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75)
+#define AU1300_MMU_INT (AU1300_FIRST_INT + 76)
+#define AU1300_MPU_INT (AU1300_FIRST_INT + 77)
+#define AU1300_GPU_INT (AU1300_FIRST_INT + 78)
+#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79)
+#define AU1300_TOY_INT (AU1300_FIRST_INT + 80)
+#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81)
+#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82)
+#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83)
+#define AU1300_RTC_INT (AU1300_FIRST_INT + 84)
+#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85)
+#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86)
+#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87)
+#define AU1300_UART0_INT (AU1300_FIRST_INT + 88)
+#define AU1300_SD0_INT (AU1300_FIRST_INT + 89)
+#define AU1300_USB_INT (AU1300_FIRST_INT + 90)
+#define AU1300_LCD_INT (AU1300_FIRST_INT + 91)
+#define AU1300_BSA_INT (AU1300_FIRST_INT + 92)
+#define AU1300_MPE_INT (AU1300_FIRST_INT + 93)
+#define AU1300_ITE_INT (AU1300_FIRST_INT + 94)
+#define AU1300_AES_INT (AU1300_FIRST_INT + 95)
+#define AU1300_CIM_INT (AU1300_FIRST_INT + 96)
+
+/**********************************************************************/
+
+/*
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
+ */
+
+#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
+#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */
+#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */
+#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */
+#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */
+#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */
+#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */
+#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */
+#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */
+#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */
+#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */
+#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */
+#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */
+#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */
+#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
+#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */
+#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */
+#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */
+#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */
+#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */
+#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */
+#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */
+#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */
+#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */
+#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */
+#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */
+#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */
+#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */
+#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */
+#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
+#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */
+#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */
+#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */
+#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */
+#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */
+#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */
+#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */
+#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */
+
+/**********************************************************************/
+
+
+/*
+ * Au1300 GPIO+INT controller (GPIC) register offsets and bits
+ * Registers are 128bits (0x10 bytes), divided into 4 "banks".
+ */
+#define AU1300_GPIC_PINVAL 0x0000
+#define AU1300_GPIC_PINVALCLR 0x0010
+#define AU1300_GPIC_IPEND 0x0020
+#define AU1300_GPIC_PRIENC 0x0030
+#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */
+#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */
+#define AU1300_GPIC_DMASEL 0x0060
+#define AU1300_GPIC_DEVSEL 0x0080
+#define AU1300_GPIC_DEVCLR 0x0090
+#define AU1300_GPIC_RSTVAL 0x00a0
+/* pin configuration space. one 32bit register for up to 128 IRQs */
+#define AU1300_GPIC_PINCFG 0x1000
+
+#define GPIC_GPIO_TO_BIT(gpio) \
+ (1 << ((gpio) & 0x1f))
+
+#define GPIC_GPIO_BANKOFF(gpio) \
+ (((gpio) >> 5) * 4)
+
+/* Pin Control bits: who owns the pin, what does it do */
+#define GPIC_CFG_PC_GPIN 0
+#define GPIC_CFG_PC_DEV 1
+#define GPIC_CFG_PC_GPOLOW 2
+#define GPIC_CFG_PC_GPOHIGH 3
+#define GPIC_CFG_PC_MASK 3
+
+/* assign pin to MIPS IRQ line */
+#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2)
+#define GPIC_CFG_IL_MASK (3 << 2)
+
+/* pin interrupt type setup */
+#define GPIC_CFG_IC_OFF (0 << 4)
+#define GPIC_CFG_IC_LEVEL_LOW (1 << 4)
+#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4)
+#define GPIC_CFG_IC_EDGE_FALL (5 << 4)
+#define GPIC_CFG_IC_EDGE_RISE (6 << 4)
+#define GPIC_CFG_IC_EDGE_BOTH (7 << 4)
+#define GPIC_CFG_IC_MASK (7 << 4)
+
+/* allow interrupt to wake cpu from 'wait' */
+#define GPIC_CFG_IDLEWAKE (1 << 7)
+
+/***********************************************************************/
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0 0x0000
+#define AU1000_MEM_SDMODE1 0x0004
+#define AU1000_MEM_SDMODE2 0x0008
+#define AU1000_MEM_SDADDR0 0x000C
+#define AU1000_MEM_SDADDR1 0x0010
+#define AU1000_MEM_SDADDR2 0x0014
+#define AU1000_MEM_SDREFCFG 0x0018
+#define AU1000_MEM_SDPRECMD 0x001C
+#define AU1000_MEM_SDAUTOREF 0x0020
+#define AU1000_MEM_SDWRMD0 0x0024
+#define AU1000_MEM_SDWRMD1 0x0028
+#define AU1000_MEM_SDWRMD2 0x002C
+#define AU1000_MEM_SDSLEEP 0x0030
+#define AU1000_MEM_SDSMCKE 0x0034
+
+/* MEM_SDMODE register content definitions */
+#define MEM_SDMODE_F (1 << 22)
+#define MEM_SDMODE_SR (1 << 21)
+#define MEM_SDMODE_BS (1 << 20)
+#define MEM_SDMODE_RS (3 << 18)
+#define MEM_SDMODE_CS (7 << 15)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TWR (3 << 7)
+#define MEM_SDMODE_TRP (3 << 5)
+#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TCL (7 << 0)
+
+#define MEM_SDMODE_BS_2Bank (0 << 20)
+#define MEM_SDMODE_BS_4Bank (1 << 20)
+#define MEM_SDMODE_RS_11Row (0 << 18)
+#define MEM_SDMODE_RS_12Row (1 << 18)
+#define MEM_SDMODE_RS_13Row (2 << 18)
+#define MEM_SDMODE_RS_N(N) ((N) << 18)
+#define MEM_SDMODE_CS_7Col (0 << 15)
+#define MEM_SDMODE_CS_8Col (1 << 15)
+#define MEM_SDMODE_CS_9Col (2 << 15)
+#define MEM_SDMODE_CS_10Col (3 << 15)
+#define MEM_SDMODE_CS_11Col (4 << 15)
+#define MEM_SDMODE_CS_N(N) ((N) << 15)
+#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
+#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
+#define MEM_SDMODE_TWR_N(N) ((N) << 7)
+#define MEM_SDMODE_TRP_N(N) ((N) << 5)
+#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
+#define MEM_SDMODE_TCL_N(N) ((N) << 0)
+
+/* MEM_SDADDR register contents definitions */
+#define MEM_SDADDR_E (1 << 20)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSMASK (0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
+
+/* MEM_SDREFCFG register content definitions */
+#define MEM_SDREFCFG_TRC (15 << 28)
+#define MEM_SDREFCFG_TRPM (3 << 26)
+#define MEM_SDREFCFG_E (1 << 25)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N) (N)
+
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0 0x0800
+#define AU1550_MEM_SDMODE1 0x0808
+#define AU1550_MEM_SDMODE2 0x0810
+#define AU1550_MEM_SDADDR0 0x0820
+#define AU1550_MEM_SDADDR1 0x0828
+#define AU1550_MEM_SDADDR2 0x0830
+#define AU1550_MEM_SDCONFIGA 0x0840
+#define AU1550_MEM_SDCONFIGB 0x0848
+#define AU1550_MEM_SDSTAT 0x0850
+#define AU1550_MEM_SDERRADDR 0x0858
+#define AU1550_MEM_SDSTRIDE0 0x0860
+#define AU1550_MEM_SDSTRIDE1 0x0868
+#define AU1550_MEM_SDSTRIDE2 0x0870
+#define AU1550_MEM_SDWRMD0 0x0880
+#define AU1550_MEM_SDWRMD1 0x0888
+#define AU1550_MEM_SDWRMD2 0x0890
+#define AU1550_MEM_SDPRECMD 0x08C0
+#define AU1550_MEM_SDAUTOREF 0x08C8
+#define AU1550_MEM_SDSREF 0x08D0
+#define AU1550_MEM_SDSLEEP MEM_SDSREF
+
+/* Static Bus Controller register offsets */
+#define AU1000_MEM_STCFG0 0x000
+#define AU1000_MEM_STTIME0 0x004
+#define AU1000_MEM_STADDR0 0x008
+#define AU1000_MEM_STCFG1 0x010
+#define AU1000_MEM_STTIME1 0x014
+#define AU1000_MEM_STADDR1 0x018
+#define AU1000_MEM_STCFG2 0x020
+#define AU1000_MEM_STTIME2 0x024
+#define AU1000_MEM_STADDR2 0x028
+#define AU1000_MEM_STCFG3 0x030
+#define AU1000_MEM_STTIME3 0x034
+#define AU1000_MEM_STADDR3 0x038
+#define AU1000_MEM_STNDCTL 0x100
+#define AU1000_MEM_STSTAT 0x104
+
+#define MEM_STNAND_CMD 0x0
+#define MEM_STNAND_ADDR 0x4
+#define MEM_STNAND_DATA 0x20
+
+
+/* Programmable Counters 0 and 1 */
+#define AU1000_SYS_CNTRCTRL 0x14
+# define SYS_CNTRL_E1S (1 << 23)
+# define SYS_CNTRL_T1S (1 << 20)
+# define SYS_CNTRL_M21 (1 << 19)
+# define SYS_CNTRL_M11 (1 << 18)
+# define SYS_CNTRL_M01 (1 << 17)
+# define SYS_CNTRL_C1S (1 << 16)
+# define SYS_CNTRL_BP (1 << 14)
+# define SYS_CNTRL_EN1 (1 << 13)
+# define SYS_CNTRL_BT1 (1 << 12)
+# define SYS_CNTRL_EN0 (1 << 11)
+# define SYS_CNTRL_BT0 (1 << 10)
+# define SYS_CNTRL_E0 (1 << 8)
+# define SYS_CNTRL_E0S (1 << 7)
+# define SYS_CNTRL_32S (1 << 5)
+# define SYS_CNTRL_T0S (1 << 4)
+# define SYS_CNTRL_M20 (1 << 3)
+# define SYS_CNTRL_M10 (1 << 2)
+# define SYS_CNTRL_M00 (1 << 1)
+# define SYS_CNTRL_C0S (1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define AU1000_SYS_TOYTRIM 0x00
+#define AU1000_SYS_TOYWRITE 0x04
+#define AU1000_SYS_TOYMATCH0 0x08
+#define AU1000_SYS_TOYMATCH1 0x0c
+#define AU1000_SYS_TOYMATCH2 0x10
+#define AU1000_SYS_TOYREAD 0x40
+
+/* Programmable Counter 1 Registers */
+#define AU1000_SYS_RTCTRIM 0x44
+#define AU1000_SYS_RTCWRITE 0x48
+#define AU1000_SYS_RTCMATCH0 0x4c
+#define AU1000_SYS_RTCMATCH1 0x50
+#define AU1000_SYS_RTCMATCH2 0x54
+#define AU1000_SYS_RTCREAD 0x58
+
+
+/* GPIO */
+#define AU1000_SYS_PINFUNC 0x2C
+# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
+# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
+# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
+# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
+# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
+# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
+# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
+# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
+# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
+# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
+# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
+# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
+# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
+# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
+# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
+# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
+# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
+# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
+# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
+
+/* Au1550 only. Redefines lots of pins */
+# define SYS_PF_PSC2_MASK (7 << 17)
+# define SYS_PF_PSC2_AC97 0
+# define SYS_PF_PSC2_SPI 0
+# define SYS_PF_PSC2_I2S (1 << 17)
+# define SYS_PF_PSC2_SMBUS (3 << 17)
+# define SYS_PF_PSC2_GPIO (7 << 17)
+# define SYS_PF_PSC3_MASK (7 << 20)
+# define SYS_PF_PSC3_AC97 0
+# define SYS_PF_PSC3_SPI 0
+# define SYS_PF_PSC3_I2S (1 << 20)
+# define SYS_PF_PSC3_SMBUS (3 << 20)
+# define SYS_PF_PSC3_GPIO (7 << 20)
+# define SYS_PF_PSC1_S1 (1 << 1)
+# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#define SYS_PINFUNC_DMA (1 << 31)
+#define SYS_PINFUNC_S0A (1 << 30)
+#define SYS_PINFUNC_S1A (1 << 29)
+#define SYS_PINFUNC_LP0 (1 << 28)
+#define SYS_PINFUNC_LP1 (1 << 27)
+#define SYS_PINFUNC_LD16 (1 << 26)
+#define SYS_PINFUNC_LD8 (1 << 25)
+#define SYS_PINFUNC_LD1 (1 << 24)
+#define SYS_PINFUNC_LD0 (1 << 23)
+#define SYS_PINFUNC_P1A (3 << 21)
+#define SYS_PINFUNC_P1B (1 << 20)
+#define SYS_PINFUNC_FS3 (1 << 19)
+#define SYS_PINFUNC_P0A (3 << 17)
+#define SYS_PINFUNC_CS (1 << 16)
+#define SYS_PINFUNC_CIM (1 << 15)
+#define SYS_PINFUNC_P1C (1 << 14)
+#define SYS_PINFUNC_U1T (1 << 12)
+#define SYS_PINFUNC_U1R (1 << 11)
+#define SYS_PINFUNC_EX1 (1 << 10)
+#define SYS_PINFUNC_EX0 (1 << 9)
+#define SYS_PINFUNC_U0R (1 << 8)
+#define SYS_PINFUNC_MC (1 << 7)
+#define SYS_PINFUNC_S0B (1 << 6)
+#define SYS_PINFUNC_S0C (1 << 5)
+#define SYS_PINFUNC_P0B (1 << 4)
+#define SYS_PINFUNC_U0T (1 << 3)
+#define SYS_PINFUNC_S1B (1 << 2)
+
+/* Power Management */
+#define AU1000_SYS_SCRATCH0 0x18
+#define AU1000_SYS_SCRATCH1 0x1c
+#define AU1000_SYS_WAKEMSK 0x34
+#define AU1000_SYS_ENDIAN 0x38
+#define AU1000_SYS_POWERCTRL 0x3c
+#define AU1000_SYS_WAKESRC 0x5c
+#define AU1000_SYS_SLPPWR 0x78
+#define AU1000_SYS_SLEEP 0x7c
+
+#define SYS_WAKEMSK_D2 (1 << 9)
+#define SYS_WAKEMSK_M2 (1 << 8)
+#define SYS_WAKEMSK_GPIO(x) (1 << (x))
+
+/* Clock Controller */
+#define AU1000_SYS_FREQCTRL0 0x20
+#define AU1000_SYS_FREQCTRL1 0x24
+#define AU1000_SYS_CLKSRC 0x28
+#define AU1000_SYS_CPUPLL 0x60
+#define AU1000_SYS_AUXPLL 0x64
+#define AU1300_SYS_AUXPLL2 0x68
+
+
+/**********************************************************************/
+
+
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI. When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
+ */
+#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
+
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START 0x00001000
+#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF
+
+#ifdef CONFIG_PCI
+
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xfffffffffULL
+
+#else
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xfffffffffULL
+
+#endif
+
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM 0x0000
+#define PCI_REG_CONFIG 0x0004
+#define PCI_REG_B2BMASK_CCH 0x0008
+#define PCI_REG_B2BBASE0_VID 0x000C
+#define PCI_REG_B2BBASE1_SID 0x0010
+#define PCI_REG_MWMASK_DEV 0x0014
+#define PCI_REG_MWBASE_REV_CCL 0x0018
+#define PCI_REG_ERR_ADDR 0x001C
+#define PCI_REG_SPEC_INTACK 0x0020
+#define PCI_REG_ID 0x0100
+#define PCI_REG_STATCMD 0x0104
+#define PCI_REG_CLASSREV 0x0108
+#define PCI_REG_PARAM 0x010C
+#define PCI_REG_MBAR 0x0110
+#define PCI_REG_TIMEOUT 0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff)
+#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET (1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF (1 << 25) /* fatal error */
+#define PCI_CONFIG_EP (1 << 24) /* parity error */
+#define PCI_CONFIG_EM (1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM (1 << 22) /* bad master error */
+#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */
+#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */
+#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */
+#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff)
+#define PCI_ID_DID(x) (((x) & 0xffff) << 16)
+#define PCI_ID_VID(x) ((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x) ((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x) ((x) & 0xff)
+#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x) (((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x) (((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x) ((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */
+#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */
+
+
+/**********************************************************************/
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/cpu.h>
+
+/* helpers to access the SYS_* registers */
+static inline unsigned long alchemy_rdsys(int regofs)
+{
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+
+ return __raw_readl(b + regofs);
+}
+
+static inline void alchemy_wrsys(unsigned long v, int regofs)
+{
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+
+ __raw_writel(v, b + regofs);
+ wmb(); /* drain writebuffer */
+}
+
+/* helpers to access static memctrl registers */
+static inline unsigned long alchemy_rdsmem(int regofs)
+{
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+
+ return __raw_readl(b + regofs);
+}
+
+static inline void alchemy_wrsmem(unsigned long v, int regofs)
+{
+ void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+
+ __raw_writel(v, b + regofs);
+ wmb(); /* drain writebuffer */
+}
+
+/* Early Au1000 have a write-only SYS_CPUPLL register. */
+static inline int au1xxx_cpu_has_pll_wo(void)
+{
+ switch (read_c0_prid()) {
+ case 0x00030100: /* Au1000 DA */
+ case 0x00030201: /* Au1000 HA */
+ case 0x00030202: /* Au1000 HB */
+ return 1;
+ }
+ return 0;
+}
+
+/* does CPU need CONFIG[OD] set to fix tons of errata? */
+static inline int au1xxx_cpu_needs_config_od(void)
+{
+ /*
+ * c0_config.od (bit 19) was write only (and read as 0) on the
+ * early revisions of Alchemy SOCs. It disables the bus trans-
+ * action overlapping and needs to be set to fix various errata.
+ */
+ switch (read_c0_prid()) {
+ case 0x00030100: /* Au1000 DA */
+ case 0x00030201: /* Au1000 HA */
+ case 0x00030202: /* Au1000 HB */
+ case 0x01030200: /* Au1500 AB */
+ /*
+ * Au1100/Au1200 errata actually keep silence about this bit,
+ * so we set it just in case for those revisions that require
+ * it to be set according to the (now gone) cpu_table.
+ */
+ case 0x02030200: /* Au1100 AB */
+ case 0x02030201: /* Au1100 BA */
+ case 0x02030202: /* Au1100 BC */
+ case 0x04030201: /* Au1200 AC */
+ return 1;
+ }
+ return 0;
+}
+
+#define ALCHEMY_CPU_UNKNOWN -1
+#define ALCHEMY_CPU_AU1000 0
+#define ALCHEMY_CPU_AU1500 1
+#define ALCHEMY_CPU_AU1100 2
+#define ALCHEMY_CPU_AU1550 3
+#define ALCHEMY_CPU_AU1200 4
+#define ALCHEMY_CPU_AU1300 5
+
+static inline int alchemy_get_cputype(void)
+{
+ switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) {
+ case 0x00030000:
+ return ALCHEMY_CPU_AU1000;
+ break;
+ case 0x01030000:
+ return ALCHEMY_CPU_AU1500;
+ break;
+ case 0x02030000:
+ return ALCHEMY_CPU_AU1100;
+ break;
+ case 0x03030000:
+ return ALCHEMY_CPU_AU1550;
+ break;
+ case 0x04030000:
+ case 0x05030000:
+ return ALCHEMY_CPU_AU1200;
+ break;
+ case 0x800c0000:
+ return ALCHEMY_CPU_AU1300;
+ break;
+ }
+
+ return ALCHEMY_CPU_UNKNOWN;
+}
+
+/* return number of uarts on a given cputype */
+static inline int alchemy_get_uarts(int type)
+{
+ switch (type) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1300:
+ return 4;
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1200:
+ return 2;
+ case ALCHEMY_CPU_AU1100:
+ case ALCHEMY_CPU_AU1550:
+ return 3;
+ }
+ return 0;
+}
+
+/* enable an UART block if it isn't already */
+static inline void alchemy_uart_enable(u32 uart_phys)
+{
+ void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
+ /* reset, enable clock, deassert reset */
+ if ((__raw_readl(addr + 0x100) & 3) != 3) {
+ __raw_writel(0, addr + 0x100);
+ wmb(); /* drain writebuffer */
+ __raw_writel(1, addr + 0x100);
+ wmb(); /* drain writebuffer */
+ }
+ __raw_writel(3, addr + 0x100);
+ wmb(); /* drain writebuffer */
+}
+
+static inline void alchemy_uart_disable(u32 uart_phys)
+{
+ void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
+ __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */
+ wmb(); /* drain writebuffer */
+}
+
+static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
+ int timeout, i;
+
+ /* check LSR TX_EMPTY bit */
+ timeout = 0xffffff;
+ do {
+ if (__raw_readl(base + 0x1c) & 0x20)
+ break;
+ /* slow down */
+ for (i = 10000; i; i--)
+ asm volatile ("nop");
+ } while (--timeout);
+
+ __raw_writel(c, base + 0x04); /* tx */
+ wmb(); /* drain writebuffer */
+}
+
+/* return number of ethernet MACs on a given cputype */
+static inline int alchemy_get_macs(int type)
+{
+ switch (type) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1550:
+ return 2;
+ case ALCHEMY_CPU_AU1100:
+ return 1;
+ }
+ return 0;
+}
+
+/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
+void alchemy_sleep_au1300(void);
+void au_sleep(void);
+
+/* USB: arch/mips/alchemy/common/usb.c */
+enum alchemy_usb_block {
+ ALCHEMY_USB_OHCI0,
+ ALCHEMY_USB_UDC0,
+ ALCHEMY_USB_EHCI0,
+ ALCHEMY_USB_OTG0,
+ ALCHEMY_USB_OHCI1,
+};
+int alchemy_usb_control(int block, int enable);
+
+/* PCI controller platform data */
+struct alchemy_pci_platdata {
+ int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+ int (*board_pci_idsel)(unsigned int devsel, int assert);
+ /* bits to set/clear in PCI_CONFIG register */
+ unsigned long pci_cfg_set;
+ unsigned long pci_cfg_clr;
+};
+
+/* The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's
+ * not used to select FIR/SIR mode on the transceiver but as a GPIO.
+ * Instead a CPLD has to be told about the mode. The driver calls the
+ * set_phy_mode() function in addition to driving the IRFIRSEL pin.
+ */
+#define AU1000_IRDA_PHY_MODE_OFF 0
+#define AU1000_IRDA_PHY_MODE_SIR 1
+#define AU1000_IRDA_PHY_MODE_FIR 2
+
+struct au1k_irda_platform_data {
+ void (*set_phy_mode)(int mode);
+};
+
+
+/* Multifunction pins: Each of these pins can either be assigned to the
+ * GPIO controller or a on-chip peripheral.
+ * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to
+ * assign one of these to either the GPIO controller or the device.
+ */
+enum au1300_multifunc_pins {
+ /* wake-from-str pins 0-3 */
+ AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2,
+ AU1300_PIN_WAKE3,
+ /* external clock sources for PSCs: 4-5 */
+ AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1,
+ /* 8bit MMC interface on SD0: 6-9 */
+ AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+ AU1300_PIN_SD0DAT7,
+ /* aux clk input for freqgen 3: 10 */
+ AU1300_PIN_FG3AUX,
+ /* UART1 pins: 11-18 */
+ AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+ AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+ AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+ /* UART0 pins: 19-24 */
+ AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+ AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+ /* UART2: 25-26 */
+ AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+ /* UART3: 27-28 */
+ AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+ /* LCD controller PWMs, ext pixclock: 29-31 */
+ AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+ /* SD1 interface: 32-37 */
+ AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+ AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+ /* SD2 interface: 38-43 */
+ AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+ AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+ /* PSC0/1 clocks: 44-45 */
+ AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+ /* PSCs: 46-49/50-53/54-57/58-61 */
+ AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+ AU1300_PIN_PSC0D1,
+ AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+ AU1300_PIN_PSC1D1,
+ AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0,
+ AU1300_PIN_PSC2D1,
+ AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+ AU1300_PIN_PSC3D1,
+ /* PCMCIA interface: 62-70 */
+ AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+ AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+ AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+ /* camera interface H/V sync inputs: 71-72 */
+ AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+ /* PSC2/3 clocks: 73-74 */
+ AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+};
+
+/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */
+extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio);
+extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio);
+extern void au1300_set_irq_priority(unsigned int irq, int p);
+extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio);
+
+/* Au1300 allows to disconnect certain blocks from internal power supply */
+enum au1300_vss_block {
+ AU1300_VSS_MPE = 0,
+ AU1300_VSS_BSA,
+ AU1300_VSS_GPE,
+ AU1300_VSS_MGP,
+};
+
+extern void au1300_vss_block_control(int block, int enable);
+
+enum soc_au1000_ints {
+ AU1000_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1000_UART0_INT = AU1000_FIRST_INT,
+ AU1000_UART1_INT,
+ AU1000_UART2_INT,
+ AU1000_UART3_INT,
+ AU1000_SSI0_INT,
+ AU1000_SSI1_INT,
+ AU1000_DMA_INT_BASE,
+
+ AU1000_TOY_INT = AU1000_FIRST_INT + 14,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+ AU1000_IRDA_TX_INT,
+ AU1000_IRDA_RX_INT,
+ AU1000_USB_DEV_REQ_INT,
+ AU1000_USB_DEV_SUS_INT,
+ AU1000_USB_HOST_INT,
+ AU1000_ACSYNC_INT,
+ AU1000_MAC0_DMA_INT,
+ AU1000_MAC1_DMA_INT,
+ AU1000_I2S_UO_INT,
+ AU1000_AC97C_INT,
+ AU1000_GPIO0_INT,
+ AU1000_GPIO1_INT,
+ AU1000_GPIO2_INT,
+ AU1000_GPIO3_INT,
+ AU1000_GPIO4_INT,
+ AU1000_GPIO5_INT,
+ AU1000_GPIO6_INT,
+ AU1000_GPIO7_INT,
+ AU1000_GPIO8_INT,
+ AU1000_GPIO9_INT,
+ AU1000_GPIO10_INT,
+ AU1000_GPIO11_INT,
+ AU1000_GPIO12_INT,
+ AU1000_GPIO13_INT,
+ AU1000_GPIO14_INT,
+ AU1000_GPIO15_INT,
+ AU1000_GPIO16_INT,
+ AU1000_GPIO17_INT,
+ AU1000_GPIO18_INT,
+ AU1000_GPIO19_INT,
+ AU1000_GPIO20_INT,
+ AU1000_GPIO21_INT,
+ AU1000_GPIO22_INT,
+ AU1000_GPIO23_INT,
+ AU1000_GPIO24_INT,
+ AU1000_GPIO25_INT,
+ AU1000_GPIO26_INT,
+ AU1000_GPIO27_INT,
+ AU1000_GPIO28_INT,
+ AU1000_GPIO29_INT,
+ AU1000_GPIO30_INT,
+ AU1000_GPIO31_INT,
+};
+
+enum soc_au1100_ints {
+ AU1100_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1100_UART0_INT = AU1100_FIRST_INT,
+ AU1100_UART1_INT,
+ AU1100_SD_INT,
+ AU1100_UART3_INT,
+ AU1100_SSI0_INT,
+ AU1100_SSI1_INT,
+ AU1100_DMA_INT_BASE,
+
+ AU1100_TOY_INT = AU1100_FIRST_INT + 14,
+ AU1100_TOY_MATCH0_INT,
+ AU1100_TOY_MATCH1_INT,
+ AU1100_TOY_MATCH2_INT,
+ AU1100_RTC_INT,
+ AU1100_RTC_MATCH0_INT,
+ AU1100_RTC_MATCH1_INT,
+ AU1100_RTC_MATCH2_INT,
+ AU1100_IRDA_TX_INT,
+ AU1100_IRDA_RX_INT,
+ AU1100_USB_DEV_REQ_INT,
+ AU1100_USB_DEV_SUS_INT,
+ AU1100_USB_HOST_INT,
+ AU1100_ACSYNC_INT,
+ AU1100_MAC0_DMA_INT,
+ AU1100_GPIO208_215_INT,
+ AU1100_LCD_INT,
+ AU1100_AC97C_INT,
+ AU1100_GPIO0_INT,
+ AU1100_GPIO1_INT,
+ AU1100_GPIO2_INT,
+ AU1100_GPIO3_INT,
+ AU1100_GPIO4_INT,
+ AU1100_GPIO5_INT,
+ AU1100_GPIO6_INT,
+ AU1100_GPIO7_INT,
+ AU1100_GPIO8_INT,
+ AU1100_GPIO9_INT,
+ AU1100_GPIO10_INT,
+ AU1100_GPIO11_INT,
+ AU1100_GPIO12_INT,
+ AU1100_GPIO13_INT,
+ AU1100_GPIO14_INT,
+ AU1100_GPIO15_INT,
+ AU1100_GPIO16_INT,
+ AU1100_GPIO17_INT,
+ AU1100_GPIO18_INT,
+ AU1100_GPIO19_INT,
+ AU1100_GPIO20_INT,
+ AU1100_GPIO21_INT,
+ AU1100_GPIO22_INT,
+ AU1100_GPIO23_INT,
+ AU1100_GPIO24_INT,
+ AU1100_GPIO25_INT,
+ AU1100_GPIO26_INT,
+ AU1100_GPIO27_INT,
+ AU1100_GPIO28_INT,
+ AU1100_GPIO29_INT,
+ AU1100_GPIO30_INT,
+ AU1100_GPIO31_INT,
+};
+
+enum soc_au1500_ints {
+ AU1500_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1500_UART0_INT = AU1500_FIRST_INT,
+ AU1500_PCI_INTA,
+ AU1500_PCI_INTB,
+ AU1500_UART3_INT,
+ AU1500_PCI_INTC,
+ AU1500_PCI_INTD,
+ AU1500_DMA_INT_BASE,
+
+ AU1500_TOY_INT = AU1500_FIRST_INT + 14,
+ AU1500_TOY_MATCH0_INT,
+ AU1500_TOY_MATCH1_INT,
+ AU1500_TOY_MATCH2_INT,
+ AU1500_RTC_INT,
+ AU1500_RTC_MATCH0_INT,
+ AU1500_RTC_MATCH1_INT,
+ AU1500_RTC_MATCH2_INT,
+ AU1500_PCI_ERR_INT,
+ AU1500_RESERVED_INT,
+ AU1500_USB_DEV_REQ_INT,
+ AU1500_USB_DEV_SUS_INT,
+ AU1500_USB_HOST_INT,
+ AU1500_ACSYNC_INT,
+ AU1500_MAC0_DMA_INT,
+ AU1500_MAC1_DMA_INT,
+ AU1500_AC97C_INT = AU1500_FIRST_INT + 31,
+ AU1500_GPIO0_INT,
+ AU1500_GPIO1_INT,
+ AU1500_GPIO2_INT,
+ AU1500_GPIO3_INT,
+ AU1500_GPIO4_INT,
+ AU1500_GPIO5_INT,
+ AU1500_GPIO6_INT,
+ AU1500_GPIO7_INT,
+ AU1500_GPIO8_INT,
+ AU1500_GPIO9_INT,
+ AU1500_GPIO10_INT,
+ AU1500_GPIO11_INT,
+ AU1500_GPIO12_INT,
+ AU1500_GPIO13_INT,
+ AU1500_GPIO14_INT,
+ AU1500_GPIO15_INT,
+ AU1500_GPIO200_INT,
+ AU1500_GPIO201_INT,
+ AU1500_GPIO202_INT,
+ AU1500_GPIO203_INT,
+ AU1500_GPIO20_INT,
+ AU1500_GPIO204_INT,
+ AU1500_GPIO205_INT,
+ AU1500_GPIO23_INT,
+ AU1500_GPIO24_INT,
+ AU1500_GPIO25_INT,
+ AU1500_GPIO26_INT,
+ AU1500_GPIO27_INT,
+ AU1500_GPIO28_INT,
+ AU1500_GPIO206_INT,
+ AU1500_GPIO207_INT,
+ AU1500_GPIO208_215_INT,
+};
+
+enum soc_au1550_ints {
+ AU1550_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1550_UART0_INT = AU1550_FIRST_INT,
+ AU1550_PCI_INTA,
+ AU1550_PCI_INTB,
+ AU1550_DDMA_INT,
+ AU1550_CRYPTO_INT,
+ AU1550_PCI_INTC,
+ AU1550_PCI_INTD,
+ AU1550_PCI_RST_INT,
+ AU1550_UART1_INT,
+ AU1550_UART3_INT,
+ AU1550_PSC0_INT,
+ AU1550_PSC1_INT,
+ AU1550_PSC2_INT,
+ AU1550_PSC3_INT,
+ AU1550_TOY_INT,
+ AU1550_TOY_MATCH0_INT,
+ AU1550_TOY_MATCH1_INT,
+ AU1550_TOY_MATCH2_INT,
+ AU1550_RTC_INT,
+ AU1550_RTC_MATCH0_INT,
+ AU1550_RTC_MATCH1_INT,
+ AU1550_RTC_MATCH2_INT,
+
+ AU1550_NAND_INT = AU1550_FIRST_INT + 23,
+ AU1550_USB_DEV_REQ_INT,
+ AU1550_USB_DEV_SUS_INT,
+ AU1550_USB_HOST_INT,
+ AU1550_MAC0_DMA_INT,
+ AU1550_MAC1_DMA_INT,
+ AU1550_GPIO0_INT = AU1550_FIRST_INT + 32,
+ AU1550_GPIO1_INT,
+ AU1550_GPIO2_INT,
+ AU1550_GPIO3_INT,
+ AU1550_GPIO4_INT,
+ AU1550_GPIO5_INT,
+ AU1550_GPIO6_INT,
+ AU1550_GPIO7_INT,
+ AU1550_GPIO8_INT,
+ AU1550_GPIO9_INT,
+ AU1550_GPIO10_INT,
+ AU1550_GPIO11_INT,
+ AU1550_GPIO12_INT,
+ AU1550_GPIO13_INT,
+ AU1550_GPIO14_INT,
+ AU1550_GPIO15_INT,
+ AU1550_GPIO200_INT,
+ AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */
+ AU1550_GPIO16_INT,
+ AU1550_GPIO17_INT,
+ AU1550_GPIO20_INT,
+ AU1550_GPIO21_INT,
+ AU1550_GPIO22_INT,
+ AU1550_GPIO23_INT,
+ AU1550_GPIO24_INT,
+ AU1550_GPIO25_INT,
+ AU1550_GPIO26_INT,
+ AU1550_GPIO27_INT,
+ AU1550_GPIO28_INT,
+ AU1550_GPIO206_INT,
+ AU1550_GPIO207_INT,
+ AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */
+};
+
+enum soc_au1200_ints {
+ AU1200_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1200_UART0_INT = AU1200_FIRST_INT,
+ AU1200_SWT_INT,
+ AU1200_SD_INT,
+ AU1200_DDMA_INT,
+ AU1200_MAE_BE_INT,
+ AU1200_GPIO200_INT,
+ AU1200_GPIO201_INT,
+ AU1200_GPIO202_INT,
+ AU1200_UART1_INT,
+ AU1200_MAE_FE_INT,
+ AU1200_PSC0_INT,
+ AU1200_PSC1_INT,
+ AU1200_AES_INT,
+ AU1200_CAMERA_INT,
+ AU1200_TOY_INT,
+ AU1200_TOY_MATCH0_INT,
+ AU1200_TOY_MATCH1_INT,
+ AU1200_TOY_MATCH2_INT,
+ AU1200_RTC_INT,
+ AU1200_RTC_MATCH0_INT,
+ AU1200_RTC_MATCH1_INT,
+ AU1200_RTC_MATCH2_INT,
+ AU1200_GPIO203_INT,
+ AU1200_NAND_INT,
+ AU1200_GPIO204_INT,
+ AU1200_GPIO205_INT,
+ AU1200_GPIO206_INT,
+ AU1200_GPIO207_INT,
+ AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */
+ AU1200_USB_INT,
+ AU1200_LCD_INT,
+ AU1200_MAE_BOTH_INT,
+ AU1200_GPIO0_INT,
+ AU1200_GPIO1_INT,
+ AU1200_GPIO2_INT,
+ AU1200_GPIO3_INT,
+ AU1200_GPIO4_INT,
+ AU1200_GPIO5_INT,
+ AU1200_GPIO6_INT,
+ AU1200_GPIO7_INT,
+ AU1200_GPIO8_INT,
+ AU1200_GPIO9_INT,
+ AU1200_GPIO10_INT,
+ AU1200_GPIO11_INT,
+ AU1200_GPIO12_INT,
+ AU1200_GPIO13_INT,
+ AU1200_GPIO14_INT,
+ AU1200_GPIO15_INT,
+ AU1200_GPIO16_INT,
+ AU1200_GPIO17_INT,
+ AU1200_GPIO18_INT,
+ AU1200_GPIO19_INT,
+ AU1200_GPIO20_INT,
+ AU1200_GPIO21_INT,
+ AU1200_GPIO22_INT,
+ AU1200_GPIO23_INT,
+ AU1200_GPIO24_INT,
+ AU1200_GPIO25_INT,
+ AU1200_GPIO26_INT,
+ AU1200_GPIO27_INT,
+ AU1200_GPIO28_INT,
+ AU1200_GPIO29_INT,
+ AU1200_GPIO30_INT,
+ AU1200_GPIO31_INT,
+};
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#endif
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1000_dma.h
new file mode 100644
index 0000000..0a0cd42
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -0,0 +1,453 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Defines for using and allocating DMA channels on the Alchemy
+ * Au1x00 MIPS processors.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_AU1000_DMA_H
+#define __ASM_AU1000_DMA_H
+
+#include <linux/io.h> /* need byte IO */
+#include <linux/spinlock.h> /* And spinlocks */
+#include <linux/delay.h>
+
+#define NUM_AU1000_DMA_CHANNELS 8
+
+/* DMA Channel Register Offsets */
+#define DMA_MODE_SET 0x00000000
+#define DMA_MODE_READ DMA_MODE_SET
+#define DMA_MODE_CLEAR 0x00000004
+/* DMA Mode register bits follow */
+#define DMA_DAH_MASK (0x0f << 20)
+#define DMA_DID_BIT 16
+#define DMA_DID_MASK (0x0f << DMA_DID_BIT)
+#define DMA_DS (1 << 15)
+#define DMA_BE (1 << 13)
+#define DMA_DR (1 << 12)
+#define DMA_TS8 (1 << 11)
+#define DMA_DW_BIT 9
+#define DMA_DW_MASK (0x03 << DMA_DW_BIT)
+#define DMA_DW8 (0 << DMA_DW_BIT)
+#define DMA_DW16 (1 << DMA_DW_BIT)
+#define DMA_DW32 (2 << DMA_DW_BIT)
+#define DMA_NC (1 << 8)
+#define DMA_IE (1 << 7)
+#define DMA_HALT (1 << 6)
+#define DMA_GO (1 << 5)
+#define DMA_AB (1 << 4)
+#define DMA_D1 (1 << 3)
+#define DMA_BE1 (1 << 2)
+#define DMA_D0 (1 << 1)
+#define DMA_BE0 (1 << 0)
+
+#define DMA_PERIPHERAL_ADDR 0x00000008
+#define DMA_BUFFER0_START 0x0000000C
+#define DMA_BUFFER1_START 0x00000014
+#define DMA_BUFFER0_COUNT 0x00000010
+#define DMA_BUFFER1_COUNT 0x00000018
+#define DMA_BAH_BIT 16
+#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT 0
+#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
+
+/* DMA Device IDs follow */
+enum {
+ DMA_ID_UART0_TX = 0,
+ DMA_ID_UART0_RX,
+ DMA_ID_GP04,
+ DMA_ID_GP05,
+ DMA_ID_AC97C_TX,
+ DMA_ID_AC97C_RX,
+ DMA_ID_UART3_TX,
+ DMA_ID_UART3_RX,
+ DMA_ID_USBDEV_EP0_RX,
+ DMA_ID_USBDEV_EP0_TX,
+ DMA_ID_USBDEV_EP2_TX,
+ DMA_ID_USBDEV_EP3_TX,
+ DMA_ID_USBDEV_EP4_RX,
+ DMA_ID_USBDEV_EP5_RX,
+ DMA_ID_I2S_TX,
+ DMA_ID_I2S_RX,
+ DMA_NUM_DEV
+};
+
+/* DMA Device ID's for 2nd bank (AU1100) follow */
+enum {
+ DMA_ID_SD0_TX = 0,
+ DMA_ID_SD0_RX,
+ DMA_ID_SD1_TX,
+ DMA_ID_SD1_RX,
+ DMA_NUM_DEV_BANK2
+};
+
+struct dma_chan {
+ int dev_id; /* this channel is allocated if >= 0, */
+ /* free otherwise */
+ void __iomem *io;
+ const char *dev_str;
+ int irq;
+ void *irq_dev;
+ unsigned int fifo_addr;
+ unsigned int mode;
+};
+
+/* These are in arch/mips/au1000/common/dma.c */
+extern struct dma_chan au1000_dma_table[];
+extern int request_au1000_dma(int dev_id,
+ const char *dev_str,
+ irq_handler_t irqhandler,
+ unsigned long irqflags,
+ void *irq_dev_id);
+extern void free_au1000_dma(unsigned int dmanr);
+extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+ int length, int *eof, void *data);
+extern void dump_au1000_dma_channel(unsigned int dmanr);
+extern spinlock_t au1000_dma_spin_lock;
+
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
+{
+ if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+ au1000_dma_table[dmanr].dev_id < 0)
+ return NULL;
+ return &au1000_dma_table[dmanr];
+}
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&au1000_dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
+}
+
+/*
+ * Set the DMA buffer enable bits in the mode register.
+ */
+static inline void enable_dma_buffer0(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+}
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+}
+static inline void enable_dma_buffers(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+}
+
+static inline void start_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_GO, chan->io + DMA_MODE_SET);
+}
+
+#define DMA_HALT_POLL 0x5000
+
+static inline void halt_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+ int i;
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+
+ /* Poll the halt bit */
+ for (i = 0; i < DMA_HALT_POLL; i++)
+ if (__raw_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+ break;
+ if (i == DMA_HALT_POLL)
+ printk(KERN_INFO "halt_dma: HALT poll expired!\n");
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+
+ halt_dma(dmanr);
+
+ /* Now we can disable the buffers */
+ __raw_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline int dma_halted(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 1;
+ return (__raw_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+}
+
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+ u32 mode;
+
+ if (!chan)
+ return;
+
+ disable_dma(dmanr);
+
+ /* Set device FIFO address */
+ __raw_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
+
+ mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
+ if (chan->irq)
+ mode |= DMA_IE;
+
+ __raw_writel(~mode, chan->io + DMA_MODE_CLEAR);
+ __raw_writel(mode, chan->io + DMA_MODE_SET);
+}
+
+/*
+ * Set mode for a specific DMA channel
+ */
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ /*
+ * set_dma_mode is only allowed to change endianess, direction,
+ * transfer size, device FIFO width, and coherency settings.
+ * Make sure anything else is masked off.
+ */
+ mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+ chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+ chan->mode |= mode;
+}
+
+static inline unsigned int get_dma_mode(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 0;
+ return chan->mode;
+}
+
+static inline int get_dma_active_buffer(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return -1;
+ return (__raw_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+}
+
+/*
+ * Set the device FIFO address for a specific DMA channel - only
+ * applicable to GPO4 and GPO5. All the other devices have fixed
+ * FIFO addresses.
+ */
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+
+ if (chan->mode & DMA_DS) /* second bank of device IDs */
+ return;
+
+ if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
+ return;
+
+ __raw_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+}
+
+/*
+ * Clear the DMA buffer done bits in the mode register.
+ */
+static inline void clear_dma_done0(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline void clear_dma_done1(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+}
+
+/*
+ * This does nothing - not applicable to Au1000 DMA.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+/*
+ * Set Buffer 0 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(a, chan->io + DMA_BUFFER0_START);
+}
+
+/*
+ * Set Buffer 1 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ __raw_writel(a, chan->io + DMA_BUFFER1_START);
+}
+
+
+/*
+ * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ count &= DMA_COUNT_MASK;
+ __raw_writel(count, chan->io + DMA_BUFFER0_COUNT);
+}
+
+/*
+ * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ count &= DMA_COUNT_MASK;
+ __raw_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ count &= DMA_COUNT_MASK;
+ __raw_writel(count, chan->io + DMA_BUFFER0_COUNT);
+ __raw_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Returns which buffer has its done bit set in the mode register.
+ * Returns -1 if neither or both done bits set.
+ */
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 0;
+ return __raw_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+}
+
+
+/*
+ * Returns the DMA channel's Buffer Done IRQ number.
+ */
+static inline int get_dma_done_irq(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return -1;
+ return chan->irq;
+}
+
+/*
+ * Get DMA residue count. Returns the number of _bytes_ left to transfer.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+ int curBufCntReg, count;
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 0;
+
+ curBufCntReg = (__raw_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+ DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
+
+ count = __raw_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+
+ if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
+ count <<= 1;
+ else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
+ count <<= 2;
+
+ return count;
+}
+
+#endif /* __ASM_AU1000_DMA_H */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
new file mode 100644
index 0000000..cadab91
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -0,0 +1,210 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Defines for using the MMC/SD controllers on the
+ * Alchemy Au1100 mips processor.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ * dan@embeddededge.com or tim@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*
+ * AU1100 MMC/SD definitions.
+ *
+ * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary"
+ * June, 2003
+ */
+
+#ifndef __ASM_AU1100_MMC_H
+#define __ASM_AU1100_MMC_H
+
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+ int(*cd_setup)(void *mmc_host, int on);
+ int(*card_inserted)(void *mmc_host);
+ int(*card_readonly)(void *mmc_host);
+ void(*set_power)(void *mmc_host, int state);
+ struct led_classdev *led;
+ unsigned long mask_host_caps;
+};
+
+#define SD0_BASE 0xB0600000
+#define SD1_BASE 0xB0680000
+
+
+/*
+ * Register offsets.
+ */
+#define SD_TXPORT (0x0000)
+#define SD_RXPORT (0x0004)
+#define SD_CONFIG (0x0008)
+#define SD_ENABLE (0x000C)
+#define SD_CONFIG2 (0x0010)
+#define SD_BLKSIZE (0x0014)
+#define SD_STATUS (0x0018)
+#define SD_DEBUG (0x001C)
+#define SD_CMD (0x0020)
+#define SD_CMDARG (0x0024)
+#define SD_RESP3 (0x0028)
+#define SD_RESP2 (0x002C)
+#define SD_RESP1 (0x0030)
+#define SD_RESP0 (0x0034)
+#define SD_TIMEOUT (0x0038)
+
+
+/*
+ * SD_TXPORT bit definitions.
+ */
+#define SD_TXPORT_TXD (0x000000ff)
+
+
+/*
+ * SD_RXPORT bit definitions.
+ */
+#define SD_RXPORT_RXD (0x000000ff)
+
+
+/*
+ * SD_CONFIG bit definitions.
+ */
+#define SD_CONFIG_DIV (0x000001ff)
+#define SD_CONFIG_DE (0x00000200)
+#define SD_CONFIG_NE (0x00000400)
+#define SD_CONFIG_TU (0x00000800)
+#define SD_CONFIG_TO (0x00001000)
+#define SD_CONFIG_RU (0x00002000)
+#define SD_CONFIG_RO (0x00004000)
+#define SD_CONFIG_I (0x00008000)
+#define SD_CONFIG_CR (0x00010000)
+#define SD_CONFIG_RAT (0x00020000)
+#define SD_CONFIG_DD (0x00040000)
+#define SD_CONFIG_DT (0x00080000)
+#define SD_CONFIG_SC (0x00100000)
+#define SD_CONFIG_RC (0x00200000)
+#define SD_CONFIG_WC (0x00400000)
+#define SD_CONFIG_xxx (0x00800000)
+#define SD_CONFIG_TH (0x01000000)
+#define SD_CONFIG_TE (0x02000000)
+#define SD_CONFIG_TA (0x04000000)
+#define SD_CONFIG_RH (0x08000000)
+#define SD_CONFIG_RA (0x10000000)
+#define SD_CONFIG_RF (0x20000000)
+#define SD_CONFIG_CD (0x40000000)
+#define SD_CONFIG_SI (0x80000000)
+
+
+/*
+ * SD_ENABLE bit definitions.
+ */
+#define SD_ENABLE_CE (0x00000001)
+#define SD_ENABLE_R (0x00000002)
+
+
+/*
+ * SD_CONFIG2 bit definitions.
+ */
+#define SD_CONFIG2_EN (0x00000001)
+#define SD_CONFIG2_FF (0x00000002)
+#define SD_CONFIG2_xx1 (0x00000004)
+#define SD_CONFIG2_DF (0x00000008)
+#define SD_CONFIG2_DC (0x00000010)
+#define SD_CONFIG2_xx2 (0x000000e0)
+#define SD_CONFIG2_BB (0x00000080)
+#define SD_CONFIG2_WB (0x00000100)
+#define SD_CONFIG2_RW (0x00000200)
+#define SD_CONFIG2_DP (0x00000400)
+
+
+/*
+ * SD_BLKSIZE bit definitions.
+ */
+#define SD_BLKSIZE_BS (0x000007ff)
+#define SD_BLKSIZE_BS_SHIFT (0)
+#define SD_BLKSIZE_BC (0x01ff0000)
+#define SD_BLKSIZE_BC_SHIFT (16)
+
+
+/*
+ * SD_STATUS bit definitions.
+ */
+#define SD_STATUS_DCRCW (0x00000007)
+#define SD_STATUS_xx1 (0x00000008)
+#define SD_STATUS_CB (0x00000010)
+#define SD_STATUS_DB (0x00000020)
+#define SD_STATUS_CF (0x00000040)
+#define SD_STATUS_D3 (0x00000080)
+#define SD_STATUS_xx2 (0x00000300)
+#define SD_STATUS_NE (0x00000400)
+#define SD_STATUS_TU (0x00000800)
+#define SD_STATUS_TO (0x00001000)
+#define SD_STATUS_RU (0x00002000)
+#define SD_STATUS_RO (0x00004000)
+#define SD_STATUS_I (0x00008000)
+#define SD_STATUS_CR (0x00010000)
+#define SD_STATUS_RAT (0x00020000)
+#define SD_STATUS_DD (0x00040000)
+#define SD_STATUS_DT (0x00080000)
+#define SD_STATUS_SC (0x00100000)
+#define SD_STATUS_RC (0x00200000)
+#define SD_STATUS_WC (0x00400000)
+#define SD_STATUS_xx3 (0x00800000)
+#define SD_STATUS_TH (0x01000000)
+#define SD_STATUS_TE (0x02000000)
+#define SD_STATUS_TA (0x04000000)
+#define SD_STATUS_RH (0x08000000)
+#define SD_STATUS_RA (0x10000000)
+#define SD_STATUS_RF (0x20000000)
+#define SD_STATUS_CD (0x40000000)
+#define SD_STATUS_SI (0x80000000)
+
+
+/*
+ * SD_CMD bit definitions.
+ */
+#define SD_CMD_GO (0x00000001)
+#define SD_CMD_RY (0x00000002)
+#define SD_CMD_xx1 (0x0000000c)
+#define SD_CMD_CT_MASK (0x000000f0)
+#define SD_CMD_CT_0 (0x00000000)
+#define SD_CMD_CT_1 (0x00000010)
+#define SD_CMD_CT_2 (0x00000020)
+#define SD_CMD_CT_3 (0x00000030)
+#define SD_CMD_CT_4 (0x00000040)
+#define SD_CMD_CT_5 (0x00000050)
+#define SD_CMD_CT_6 (0x00000060)
+#define SD_CMD_CT_7 (0x00000070)
+#define SD_CMD_CI (0x0000ff00)
+#define SD_CMD_CI_SHIFT (8)
+#define SD_CMD_RT_MASK (0x00ff0000)
+#define SD_CMD_RT_0 (0x00000000)
+#define SD_CMD_RT_1 (0x00010000)
+#define SD_CMD_RT_2 (0x00020000)
+#define SD_CMD_RT_3 (0x00030000)
+#define SD_CMD_RT_4 (0x00040000)
+#define SD_CMD_RT_5 (0x00050000)
+#define SD_CMD_RT_6 (0x00060000)
+#define SD_CMD_RT_1B (0x00810000)
+
+
+#endif /* __ASM_AU1100_MMC_H */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1200fb.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1200fb.h
new file mode 100644
index 0000000..e0e98f0
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1200fb.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * platform data for au1200fb driver.
+ */
+
+#ifndef _AU1200FB_PLAT_H_
+#define _AU1200FB_PLAT_H_
+
+struct au1200fb_platdata {
+ int (*panel_index)(void);
+ int (*panel_init)(void);
+ int (*panel_shutdown)(void);
+};
+
+#endif
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1550_spi.h
new file mode 100644
index 0000000..fe6ca46
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1550_spi.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
+ */
+
+#ifndef _AU1550_SPI_H_
+#define _AU1550_SPI_H_
+
+struct au1550_spi_info {
+ u32 mainclk_hz; /* main input clock frequency of PSC */
+ u16 num_chipselect; /* number of chipselects supported */
+ void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+ void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+};
+
+#endif
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1550nd.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1550nd.h
new file mode 100644
index 0000000..d26dc1d
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1550nd.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * platform data for the Au1550 NAND driver
+ */
+
+#ifndef _AU1550ND_H_
+#define _AU1550ND_H_
+
+#include <linux/mtd/partitions.h>
+
+struct au1550nd_platdata {
+ struct mtd_partition *parts;
+ int num_parts;
+ int devwidth; /* 0 = 8bit device, 1 = 16bit device */
+};
+
+#endif
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 0000000..456ddba
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,388 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Include file for Alchemy Semiconductor's Au1550 Descriptor
+ * Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ * dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+typedef volatile struct dbdma_global {
+ u32 ddma_config;
+ u32 ddma_intstat;
+ u32 ddma_throttle;
+ u32 ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration. */
+#define DDMA_CONFIG_AF (1 << 2)
+#define DDMA_CONFIG_AH (1 << 1)
+#define DDMA_CONFIG_AL (1 << 0)
+
+#define DDMA_THROTTLE_EN (1 << 31)
+
+/* The structure of a DMA Channel. */
+typedef volatile struct au1xxx_dma_channel {
+ u32 ddma_cfg; /* See below */
+ u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
+ u32 ddma_statptr; /* word aligned pointer to status word */
+ u32 ddma_dbell; /* A write activates channel operation */
+ u32 ddma_irq; /* If bit 0 set, interrupt pending */
+ u32 ddma_stat; /* See below */
+ u32 ddma_bytecnt; /* Byte count, valid only when chan idle */
+ /* Remainder, up to the 256 byte boundary, is reserved. */
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */
+#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */
+#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */
+#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */
+#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */
+#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */
+#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE (1 << 2) /* Source big endian */
+#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */
+#define DDMA_CFG_EN (1 << 0) /* Channel enable */
+
+/*
+ * Always set when descriptor processing done, regardless of
+ * interrupt enable state. Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN (1 << 0)
+
+#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */
+#define DDMA_STAT_V (1 << 1) /* Descriptor valid */
+#define DDMA_STAT_H (1 << 0) /* Channel Halted */
+
+/*
+ * "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef volatile struct au1xxx_ddma_desc {
+ u32 dscr_cmd0; /* See below */
+ u32 dscr_cmd1; /* See below */
+ u32 dscr_source0; /* source phys address */
+ u32 dscr_source1; /* See below */
+ u32 dscr_dest0; /* Destination address */
+ u32 dscr_dest1; /* See below */
+ u32 dscr_stat; /* completion status */
+ u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
+ /*
+ * First 32 bytes are HW specific!!!
+ * Let's have some SW data following -- make sure it's 32 bytes.
+ */
+ u32 sw_status;
+ u32 sw_context;
+ u32 sw_reserved[6];
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
+#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */
+#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */
+#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */
+#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */
+#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */
+#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */
+#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */
+#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */
+#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */
+#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */
+#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
+
+#define SW_STATUS_INUSE (1 << 0)
+
+/* Command 0 device IDs. */
+#define AU1550_DSCR_CMD0_UART0_TX 0
+#define AU1550_DSCR_CMD0_UART0_RX 1
+#define AU1550_DSCR_CMD0_UART3_TX 2
+#define AU1550_DSCR_CMD0_UART3_RX 3
+#define AU1550_DSCR_CMD0_DMA_REQ0 4
+#define AU1550_DSCR_CMD0_DMA_REQ1 5
+#define AU1550_DSCR_CMD0_DMA_REQ2 6
+#define AU1550_DSCR_CMD0_DMA_REQ3 7
+#define AU1550_DSCR_CMD0_USBDEV_RX0 8
+#define AU1550_DSCR_CMD0_USBDEV_TX0 9
+#define AU1550_DSCR_CMD0_USBDEV_TX1 10
+#define AU1550_DSCR_CMD0_USBDEV_TX2 11
+#define AU1550_DSCR_CMD0_USBDEV_RX3 12
+#define AU1550_DSCR_CMD0_USBDEV_RX4 13
+#define AU1550_DSCR_CMD0_PSC0_TX 14
+#define AU1550_DSCR_CMD0_PSC0_RX 15
+#define AU1550_DSCR_CMD0_PSC1_TX 16
+#define AU1550_DSCR_CMD0_PSC1_RX 17
+#define AU1550_DSCR_CMD0_PSC2_TX 18
+#define AU1550_DSCR_CMD0_PSC2_RX 19
+#define AU1550_DSCR_CMD0_PSC3_TX 20
+#define AU1550_DSCR_CMD0_PSC3_RX 21
+#define AU1550_DSCR_CMD0_PCI_WRITE 22
+#define AU1550_DSCR_CMD0_NAND_FLASH 23
+#define AU1550_DSCR_CMD0_MAC0_RX 24
+#define AU1550_DSCR_CMD0_MAC0_TX 25
+#define AU1550_DSCR_CMD0_MAC1_RX 26
+#define AU1550_DSCR_CMD0_MAC1_TX 27
+
+#define AU1200_DSCR_CMD0_UART0_TX 0
+#define AU1200_DSCR_CMD0_UART0_RX 1
+#define AU1200_DSCR_CMD0_UART1_TX 2
+#define AU1200_DSCR_CMD0_UART1_RX 3
+#define AU1200_DSCR_CMD0_DMA_REQ0 4
+#define AU1200_DSCR_CMD0_DMA_REQ1 5
+#define AU1200_DSCR_CMD0_MAE_BE 6
+#define AU1200_DSCR_CMD0_MAE_FE 7
+#define AU1200_DSCR_CMD0_SDMS_TX0 8
+#define AU1200_DSCR_CMD0_SDMS_RX0 9
+#define AU1200_DSCR_CMD0_SDMS_TX1 10
+#define AU1200_DSCR_CMD0_SDMS_RX1 11
+#define AU1200_DSCR_CMD0_AES_TX 13
+#define AU1200_DSCR_CMD0_AES_RX 12
+#define AU1200_DSCR_CMD0_PSC0_TX 14
+#define AU1200_DSCR_CMD0_PSC0_RX 15
+#define AU1200_DSCR_CMD0_PSC1_TX 16
+#define AU1200_DSCR_CMD0_PSC1_RX 17
+#define AU1200_DSCR_CMD0_CIM_RXA 18
+#define AU1200_DSCR_CMD0_CIM_RXB 19
+#define AU1200_DSCR_CMD0_CIM_RXC 20
+#define AU1200_DSCR_CMD0_MAE_BOTH 21
+#define AU1200_DSCR_CMD0_LCD 22
+#define AU1200_DSCR_CMD0_NAND_FLASH 23
+#define AU1200_DSCR_CMD0_PSC0_SYNC 24
+#define AU1200_DSCR_CMD0_PSC1_SYNC 25
+#define AU1200_DSCR_CMD0_CIM_SYNC 26
+
+#define AU1300_DSCR_CMD0_UART0_TX 0
+#define AU1300_DSCR_CMD0_UART0_RX 1
+#define AU1300_DSCR_CMD0_UART1_TX 2
+#define AU1300_DSCR_CMD0_UART1_RX 3
+#define AU1300_DSCR_CMD0_UART2_TX 4
+#define AU1300_DSCR_CMD0_UART2_RX 5
+#define AU1300_DSCR_CMD0_UART3_TX 6
+#define AU1300_DSCR_CMD0_UART3_RX 7
+#define AU1300_DSCR_CMD0_SDMS_TX0 8
+#define AU1300_DSCR_CMD0_SDMS_RX0 9
+#define AU1300_DSCR_CMD0_SDMS_TX1 10
+#define AU1300_DSCR_CMD0_SDMS_RX1 11
+#define AU1300_DSCR_CMD0_AES_TX 12
+#define AU1300_DSCR_CMD0_AES_RX 13
+#define AU1300_DSCR_CMD0_PSC0_TX 14
+#define AU1300_DSCR_CMD0_PSC0_RX 15
+#define AU1300_DSCR_CMD0_PSC1_TX 16
+#define AU1300_DSCR_CMD0_PSC1_RX 17
+#define AU1300_DSCR_CMD0_PSC2_TX 18
+#define AU1300_DSCR_CMD0_PSC2_RX 19
+#define AU1300_DSCR_CMD0_PSC3_TX 20
+#define AU1300_DSCR_CMD0_PSC3_RX 21
+#define AU1300_DSCR_CMD0_LCD 22
+#define AU1300_DSCR_CMD0_NAND_FLASH 23
+#define AU1300_DSCR_CMD0_SDMS_TX2 24
+#define AU1300_DSCR_CMD0_SDMS_RX2 25
+#define AU1300_DSCR_CMD0_CIM_SYNC 26
+#define AU1300_DSCR_CMD0_UDMA 27
+#define AU1300_DSCR_CMD0_DMA_REQ0 28
+#define AU1300_DSCR_CMD0_DMA_REQ1 29
+
+#define DSCR_CMD0_THROTTLE 30
+#define DSCR_CMD0_ALWAYS 31
+#define DSCR_NDEV_IDS 32
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+ ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF)
+
+#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width. */
+#define DSCR_CMD0_BYTE 0
+#define DSCR_CMD0_HALFWORD 1
+#define DSCR_CMD0_WORD 2
+
+#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type. */
+#define DSCR_CMD0_STANDARD 0
+#define DSCR_CMD0_LITERAL 1
+#define DSCR_CMD0_CMP_BRANCH 2
+
+#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13)
+
+/* Status Instruction. */
+#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */
+#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */
+#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0)
+
+/* Descriptor Command 1. */
+#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */
+#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */
+
+/* Flag description. */
+#define DSCR_CMD1_FL_MEM_STRIDE0 0
+#define DSCR_CMD1_FL_MEM_STRIDE1 1
+#define DSCR_CMD1_FL_MEM_STRIDE2 2
+
+#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride. */
+#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */
+#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */
+#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */
+#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */
+#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride. */
+#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */
+#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */
+#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1 0
+#define DSCR_xTS_SIZE2 1
+#define DSCR_xTS_SIZE4 2
+#define DSCR_xTS_SIZE8 3
+#define DSCR_SRC1_STS(x) (((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x) (((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT 0
+#define DSCR_xAM_DECREMENT 1
+#define DSCR_xAM_STATIC 2
+#define DSCR_xAM_BURST 3
+#define DSCR_SRC1_SAM(x) (((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x) (((x) & 3) << 28)
+
+/* The next descriptor pointer. */
+#define DSCR_NXTPTR_MASK (0x07ffffff)
+#define DSCR_NXTPTR(x) ((x) >> 5)
+#define DSCR_GET_NXTPTR(x) ((x) << 5)
+#define DSCR_NXTPTR_MS (1 << 27)
+
+/* The number of DBDMA channels. */
+#define NUM_DBDMA_CHANS 16
+
+/*
+ * DDMA API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+ spinlock_t lock;
+
+ u32 chan_flags;
+ u32 chan_index;
+ dbdev_tab_t *chan_src;
+ dbdev_tab_t *chan_dest;
+ au1x_dma_chan_t *chan_ptr;
+ au1x_ddma_desc_t *chan_desc_base;
+ u32 cdb_membase; /* kmalloc base of above */
+ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
+ void *chan_callparam;
+ void (*chan_callback)(int, void *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE (1 << 0)
+#define DEV_FLAGS_ANYUSE (1 << 1)
+#define DEV_FLAGS_OUT (1 << 2)
+#define DEV_FLAGS_IN (1 << 3)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_SYNC (1 << 5)
+/* end DDMA API definitions */
+
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel. The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name. The 'callback' is called during DMA completion
+ * interrupt.
+ */
+extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+ void (*callback)(int, void *),
+ void *callparam);
+
+#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
+
+/* Set the device width of an in/out FIFO. */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for DBDMA. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors. */
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+
+/* Get a buffer from the destination descriptor. */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ * Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE (1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
new file mode 100644
index 0000000..9d1c8d5
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+ int phy_static_config;
+ int phy_search_highest_addr;
+ int phy1_search_mac0;
+ int phy_addr;
+ int phy_busid;
+ int phy_irq;
+ char mac[6];
+};
+
+void __init au1xxx_override_eth_cfg(unsigned port,
+ struct au1000_eth_platform_data *eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 0000000..bb91b89
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,178 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+#define DMA_WAIT_TIMEOUT 100
+#define NUM_DESCRIPTORS PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+#define NUM_DESCRIPTORS 2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+#define AU1XXX_ATA_RQSIZE 128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#endif
+
+typedef struct {
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ ide_drive_t *drive;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
+#endif
+ int irq;
+ u32 regbase;
+ int ddma_id;
+} _auide_hwif;
+
+/******************************************************************************/
+/* PIO Mode timing calculation : */
+/* */
+/* Static Bus Spec ATA Spec */
+/* Tcsoe = t1 */
+/* Toecs = t9 */
+/* Twcs = t9 */
+/* Tcsh = t2i | t2 */
+/* Tcsoff = t2i | t2 */
+/* Twp = t2 */
+/* Tcsw = t1 */
+/* Tpm = 0 */
+/* Ta = t1+t2 */
+/******************************************************************************/
+
+#define TCSOE_MASK (0x07 << 29)
+#define TOECS_MASK (0x07 << 26)
+#define TWCS_MASK (0x07 << 28)
+#define TCSH_MASK (0x0F << 24)
+#define TCSOFF_MASK (0x07 << 20)
+#define TWP_MASK (0x3F << 14)
+#define TCSW_MASK (0x0F << 10)
+#define TPM_MASK (0x0F << 6)
+#define TA_MASK (0x3F << 0)
+#define TS_MASK (1 << 8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO0_TOECS (0x01 << 26)
+#define SBC_IDE_PIO0_TWCS (0x02 << 28)
+#define SBC_IDE_PIO0_TCSH (0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO0_TWP (0x10 << 14)
+#define SBC_IDE_PIO0_TCSW (0x04 << 10)
+#define SBC_IDE_PIO0_TPM (0x00 << 6)
+#define SBC_IDE_PIO0_TA (0x15 << 0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
+#define SBC_IDE_PIO1_TOECS (0x01 << 26)
+#define SBC_IDE_PIO1_TWCS (0x01 << 28)
+#define SBC_IDE_PIO1_TCSH (0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
+#define SBC_IDE_PIO1_TWP (0x08 << 14)
+#define SBC_IDE_PIO1_TCSW (0x03 << 10)
+#define SBC_IDE_PIO1_TPM (0x00 << 6)
+#define SBC_IDE_PIO1_TA (0x0B << 0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO2_TOECS (0x01 << 26)
+#define SBC_IDE_PIO2_TWCS (0x01 << 28)
+#define SBC_IDE_PIO2_TCSH (0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO2_TWP (0x1F << 14)
+#define SBC_IDE_PIO2_TCSW (0x05 << 10)
+#define SBC_IDE_PIO2_TPM (0x00 << 6)
+#define SBC_IDE_PIO2_TA (0x22 << 0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO3_TOECS (0x01 << 26)
+#define SBC_IDE_PIO3_TWCS (0x01 << 28)
+#define SBC_IDE_PIO3_TCSH (0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
+#define SBC_IDE_PIO3_TWP (0x15 << 14)
+#define SBC_IDE_PIO3_TCSW (0x05 << 10)
+#define SBC_IDE_PIO3_TPM (0x00 << 6)
+#define SBC_IDE_PIO3_TA (0x1A << 0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO4_TOECS (0x01 << 26)
+#define SBC_IDE_PIO4_TWCS (0x01 << 28)
+#define SBC_IDE_PIO4_TCSH (0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
+#define SBC_IDE_PIO4_TWP (0x0D << 14)
+#define SBC_IDE_PIO4_TCSW (0x03 << 10)
+#define SBC_IDE_PIO4_TPM (0x00 << 6)
+#define SBC_IDE_PIO4_TA (0x12 << 0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
+#define SBC_IDE_MDMA0_TWP (0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
+#define SBC_IDE_MDMA0_TPM (0x00 << 6)
+#define SBC_IDE_MDMA0_TA (0x0F << 0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
+#define SBC_IDE_MDMA1_TWP (0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
+#define SBC_IDE_MDMA1_TPM (0x00 << 6)
+#define SBC_IDE_MDMA1_TA (0x15 << 0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
+#define SBC_IDE_MDMA2_TWP (0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
+#define SBC_IDE_MDMA2_TPM (0x00 << 6)
+#define SBC_IDE_MDMA2_TA (0x12 << 0)
+
+#define SBC_IDE_TIMING(mode) \
+ (SBC_IDE_##mode##_TWCS | \
+ SBC_IDE_##mode##_TCSH | \
+ SBC_IDE_##mode##_TCSOFF | \
+ SBC_IDE_##mode##_TWP | \
+ SBC_IDE_##mode##_TCSW | \
+ SBC_IDE_##mode##_TPM | \
+ SBC_IDE_##mode##_TA)
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
new file mode 100644
index 0000000..8a9cd75
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -0,0 +1,466 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ * dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Programmable Serial Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_PSC_H_
+#define _AU1000_PSC_H_
+
+/*
+ * The PSC select and control registers are common to all protocols.
+ */
+#define PSC_SEL_OFFSET 0x00000000
+#define PSC_CTRL_OFFSET 0x00000004
+
+#define PSC_SEL_CLK_MASK (3 << 4)
+#define PSC_SEL_CLK_INTCLK (0 << 4)
+#define PSC_SEL_CLK_EXTCLK (1 << 4)
+#define PSC_SEL_CLK_SERCLK (2 << 4)
+
+#define PSC_SEL_PS_MASK 0x00000007
+#define PSC_SEL_PS_DISABLED 0
+#define PSC_SEL_PS_SPIMODE 2
+#define PSC_SEL_PS_I2SMODE 3
+#define PSC_SEL_PS_AC97MODE 4
+#define PSC_SEL_PS_SMBUSMODE 5
+
+#define PSC_CTRL_DISABLE 0
+#define PSC_CTRL_SUSPEND 2
+#define PSC_CTRL_ENABLE 3
+
+/* AC97 Registers. */
+#define PSC_AC97CFG_OFFSET 0x00000008
+#define PSC_AC97MSK_OFFSET 0x0000000c
+#define PSC_AC97PCR_OFFSET 0x00000010
+#define PSC_AC97STAT_OFFSET 0x00000014
+#define PSC_AC97EVNT_OFFSET 0x00000018
+#define PSC_AC97TXRX_OFFSET 0x0000001c
+#define PSC_AC97CDC_OFFSET 0x00000020
+#define PSC_AC97RST_OFFSET 0x00000024
+#define PSC_AC97GPO_OFFSET 0x00000028
+#define PSC_AC97GPI_OFFSET 0x0000002c
+
+/* AC97 Config Register. */
+#define PSC_AC97CFG_RT_MASK (3 << 30)
+#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
+#define PSC_AC97CFG_RT_FIFO2 (1 << 30)
+#define PSC_AC97CFG_RT_FIFO4 (2 << 30)
+#define PSC_AC97CFG_RT_FIFO8 (3 << 30)
+
+#define PSC_AC97CFG_TT_MASK (3 << 28)
+#define PSC_AC97CFG_TT_FIFO1 (0 << 28)
+#define PSC_AC97CFG_TT_FIFO2 (1 << 28)
+#define PSC_AC97CFG_TT_FIFO4 (2 << 28)
+#define PSC_AC97CFG_TT_FIFO8 (3 << 28)
+
+#define PSC_AC97CFG_DD_DISABLE (1 << 27)
+#define PSC_AC97CFG_DE_ENABLE (1 << 26)
+#define PSC_AC97CFG_SE_ENABLE (1 << 25)
+
+#define PSC_AC97CFG_LEN_MASK (0xf << 21)
+#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
+#define PSC_AC97CFG_GE_ENABLE (1)
+
+/* Enable slots 3-12. */
+#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11))
+#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1))
+
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+ * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the
+ * arithmetic in the macro.
+ */
+#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21)
+#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2)
+
+/* AC97 Mask Register. */
+#define PSC_AC97MSK_GR (1 << 25)
+#define PSC_AC97MSK_CD (1 << 24)
+#define PSC_AC97MSK_RR (1 << 13)
+#define PSC_AC97MSK_RO (1 << 12)
+#define PSC_AC97MSK_RU (1 << 11)
+#define PSC_AC97MSK_TR (1 << 10)
+#define PSC_AC97MSK_TO (1 << 9)
+#define PSC_AC97MSK_TU (1 << 8)
+#define PSC_AC97MSK_RD (1 << 5)
+#define PSC_AC97MSK_TD (1 << 4)
+#define PSC_AC97MSK_ALLMASK (PSC_AC97MSK_GR | PSC_AC97MSK_CD | \
+ PSC_AC97MSK_RR | PSC_AC97MSK_RO | \
+ PSC_AC97MSK_RU | PSC_AC97MSK_TR | \
+ PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
+ PSC_AC97MSK_RD | PSC_AC97MSK_TD)
+
+/* AC97 Protocol Control Register. */
+#define PSC_AC97PCR_RC (1 << 6)
+#define PSC_AC97PCR_RP (1 << 5)
+#define PSC_AC97PCR_RS (1 << 4)
+#define PSC_AC97PCR_TC (1 << 2)
+#define PSC_AC97PCR_TP (1 << 1)
+#define PSC_AC97PCR_TS (1 << 0)
+
+/* AC97 Status register (read only). */
+#define PSC_AC97STAT_CB (1 << 26)
+#define PSC_AC97STAT_CP (1 << 25)
+#define PSC_AC97STAT_CR (1 << 24)
+#define PSC_AC97STAT_RF (1 << 13)
+#define PSC_AC97STAT_RE (1 << 12)
+#define PSC_AC97STAT_RR (1 << 11)
+#define PSC_AC97STAT_TF (1 << 10)
+#define PSC_AC97STAT_TE (1 << 9)
+#define PSC_AC97STAT_TR (1 << 8)
+#define PSC_AC97STAT_RB (1 << 5)
+#define PSC_AC97STAT_TB (1 << 4)
+#define PSC_AC97STAT_DI (1 << 2)
+#define PSC_AC97STAT_DR (1 << 1)
+#define PSC_AC97STAT_SR (1 << 0)
+
+/* AC97 Event Register. */
+#define PSC_AC97EVNT_GR (1 << 25)
+#define PSC_AC97EVNT_CD (1 << 24)
+#define PSC_AC97EVNT_RR (1 << 13)
+#define PSC_AC97EVNT_RO (1 << 12)
+#define PSC_AC97EVNT_RU (1 << 11)
+#define PSC_AC97EVNT_TR (1 << 10)
+#define PSC_AC97EVNT_TO (1 << 9)
+#define PSC_AC97EVNT_TU (1 << 8)
+#define PSC_AC97EVNT_RD (1 << 5)
+#define PSC_AC97EVNT_TD (1 << 4)
+
+/* CODEC Command Register. */
+#define PSC_AC97CDC_RD (1 << 25)
+#define PSC_AC97CDC_ID_MASK (3 << 23)
+#define PSC_AC97CDC_INDX_MASK (0x7f << 16)
+#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23)
+#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16)
+
+/* AC97 Reset Control Register. */
+#define PSC_AC97RST_RST (1 << 1)
+#define PSC_AC97RST_SNC (1 << 0)
+
+/* PSC in I2S Mode. */
+typedef struct psc_i2s {
+ u32 psc_sel;
+ u32 psc_ctrl;
+ u32 psc_i2scfg;
+ u32 psc_i2smsk;
+ u32 psc_i2spcr;
+ u32 psc_i2sstat;
+ u32 psc_i2sevent;
+ u32 psc_i2stxrx;
+ u32 psc_i2sudf;
+} psc_i2s_t;
+
+#define PSC_I2SCFG_OFFSET 0x08
+#define PSC_I2SMASK_OFFSET 0x0C
+#define PSC_I2SPCR_OFFSET 0x10
+#define PSC_I2SSTAT_OFFSET 0x14
+#define PSC_I2SEVENT_OFFSET 0x18
+#define PSC_I2SRXTX_OFFSET 0x1C
+#define PSC_I2SUDF_OFFSET 0x20
+
+/* I2S Config Register. */
+#define PSC_I2SCFG_RT_MASK (3 << 30)
+#define PSC_I2SCFG_RT_FIFO1 (0 << 30)
+#define PSC_I2SCFG_RT_FIFO2 (1 << 30)
+#define PSC_I2SCFG_RT_FIFO4 (2 << 30)
+#define PSC_I2SCFG_RT_FIFO8 (3 << 30)
+
+#define PSC_I2SCFG_TT_MASK (3 << 28)
+#define PSC_I2SCFG_TT_FIFO1 (0 << 28)
+#define PSC_I2SCFG_TT_FIFO2 (1 << 28)
+#define PSC_I2SCFG_TT_FIFO4 (2 << 28)
+#define PSC_I2SCFG_TT_FIFO8 (3 << 28)
+
+#define PSC_I2SCFG_DD_DISABLE (1 << 27)
+#define PSC_I2SCFG_DE_ENABLE (1 << 26)
+#define PSC_I2SCFG_SET_WS(x) (((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n) ((n & 0xFF) << 16)
+#define PSC_I2SCFG_WS_MASK (PSC_I2SCFG_WS(0x3F))
+#define PSC_I2SCFG_WI (1 << 15)
+
+#define PSC_I2SCFG_DIV_MASK (3 << 13)
+#define PSC_I2SCFG_DIV2 (0 << 13)
+#define PSC_I2SCFG_DIV4 (1 << 13)
+#define PSC_I2SCFG_DIV8 (2 << 13)
+#define PSC_I2SCFG_DIV16 (3 << 13)
+
+#define PSC_I2SCFG_BI (1 << 12)
+#define PSC_I2SCFG_BUF (1 << 11)
+#define PSC_I2SCFG_MLJ (1 << 10)
+#define PSC_I2SCFG_XM (1 << 9)
+
+/* The word length equation is simply LEN+1. */
+#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4)
+#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1)
+
+#define PSC_I2SCFG_LB (1 << 2)
+#define PSC_I2SCFG_MLF (1 << 1)
+#define PSC_I2SCFG_MS (1 << 0)
+
+/* I2S Mask Register. */
+#define PSC_I2SMSK_RR (1 << 13)
+#define PSC_I2SMSK_RO (1 << 12)
+#define PSC_I2SMSK_RU (1 << 11)
+#define PSC_I2SMSK_TR (1 << 10)
+#define PSC_I2SMSK_TO (1 << 9)
+#define PSC_I2SMSK_TU (1 << 8)
+#define PSC_I2SMSK_RD (1 << 5)
+#define PSC_I2SMSK_TD (1 << 4)
+#define PSC_I2SMSK_ALLMASK (PSC_I2SMSK_RR | PSC_I2SMSK_RO | \
+ PSC_I2SMSK_RU | PSC_I2SMSK_TR | \
+ PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
+ PSC_I2SMSK_RD | PSC_I2SMSK_TD)
+
+/* I2S Protocol Control Register. */
+#define PSC_I2SPCR_RC (1 << 6)
+#define PSC_I2SPCR_RP (1 << 5)
+#define PSC_I2SPCR_RS (1 << 4)
+#define PSC_I2SPCR_TC (1 << 2)
+#define PSC_I2SPCR_TP (1 << 1)
+#define PSC_I2SPCR_TS (1 << 0)
+
+/* I2S Status register (read only). */
+#define PSC_I2SSTAT_RF (1 << 13)
+#define PSC_I2SSTAT_RE (1 << 12)
+#define PSC_I2SSTAT_RR (1 << 11)
+#define PSC_I2SSTAT_TF (1 << 10)
+#define PSC_I2SSTAT_TE (1 << 9)
+#define PSC_I2SSTAT_TR (1 << 8)
+#define PSC_I2SSTAT_RB (1 << 5)
+#define PSC_I2SSTAT_TB (1 << 4)
+#define PSC_I2SSTAT_DI (1 << 2)
+#define PSC_I2SSTAT_DR (1 << 1)
+#define PSC_I2SSTAT_SR (1 << 0)
+
+/* I2S Event Register. */
+#define PSC_I2SEVNT_RR (1 << 13)
+#define PSC_I2SEVNT_RO (1 << 12)
+#define PSC_I2SEVNT_RU (1 << 11)
+#define PSC_I2SEVNT_TR (1 << 10)
+#define PSC_I2SEVNT_TO (1 << 9)
+#define PSC_I2SEVNT_TU (1 << 8)
+#define PSC_I2SEVNT_RD (1 << 5)
+#define PSC_I2SEVNT_TD (1 << 4)
+
+/* PSC in SPI Mode. */
+typedef struct psc_spi {
+ u32 psc_sel;
+ u32 psc_ctrl;
+ u32 psc_spicfg;
+ u32 psc_spimsk;
+ u32 psc_spipcr;
+ u32 psc_spistat;
+ u32 psc_spievent;
+ u32 psc_spitxrx;
+} psc_spi_t;
+
+/* SPI Config Register. */
+#define PSC_SPICFG_RT_MASK (3 << 30)
+#define PSC_SPICFG_RT_FIFO1 (0 << 30)
+#define PSC_SPICFG_RT_FIFO2 (1 << 30)
+#define PSC_SPICFG_RT_FIFO4 (2 << 30)
+#define PSC_SPICFG_RT_FIFO8 (3 << 30)
+
+#define PSC_SPICFG_TT_MASK (3 << 28)
+#define PSC_SPICFG_TT_FIFO1 (0 << 28)
+#define PSC_SPICFG_TT_FIFO2 (1 << 28)
+#define PSC_SPICFG_TT_FIFO4 (2 << 28)
+#define PSC_SPICFG_TT_FIFO8 (3 << 28)
+
+#define PSC_SPICFG_DD_DISABLE (1 << 27)
+#define PSC_SPICFG_DE_ENABLE (1 << 26)
+#define PSC_SPICFG_CLR_BAUD(x) ((x) & ~((0x3f) << 15))
+#define PSC_SPICFG_SET_BAUD(x) (((x) & 0x3f) << 15)
+
+#define PSC_SPICFG_SET_DIV(x) (((x) & 0x03) << 13)
+#define PSC_SPICFG_DIV2 0
+#define PSC_SPICFG_DIV4 1
+#define PSC_SPICFG_DIV8 2
+#define PSC_SPICFG_DIV16 3
+
+#define PSC_SPICFG_BI (1 << 12)
+#define PSC_SPICFG_PSE (1 << 11)
+#define PSC_SPICFG_CGE (1 << 10)
+#define PSC_SPICFG_CDE (1 << 9)
+
+#define PSC_SPICFG_CLR_LEN(x) ((x) & ~((0x1f) << 4))
+#define PSC_SPICFG_SET_LEN(x) (((x-1) & 0x1f) << 4)
+
+#define PSC_SPICFG_LB (1 << 3)
+#define PSC_SPICFG_MLF (1 << 1)
+#define PSC_SPICFG_MO (1 << 0)
+
+/* SPI Mask Register. */
+#define PSC_SPIMSK_MM (1 << 16)
+#define PSC_SPIMSK_RR (1 << 13)
+#define PSC_SPIMSK_RO (1 << 12)
+#define PSC_SPIMSK_RU (1 << 11)
+#define PSC_SPIMSK_TR (1 << 10)
+#define PSC_SPIMSK_TO (1 << 9)
+#define PSC_SPIMSK_TU (1 << 8)
+#define PSC_SPIMSK_SD (1 << 5)
+#define PSC_SPIMSK_MD (1 << 4)
+#define PSC_SPIMSK_ALLMASK (PSC_SPIMSK_MM | PSC_SPIMSK_RR | \
+ PSC_SPIMSK_RO | PSC_SPIMSK_TO | \
+ PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
+ PSC_SPIMSK_MD)
+
+/* SPI Protocol Control Register. */
+#define PSC_SPIPCR_RC (1 << 6)
+#define PSC_SPIPCR_SP (1 << 5)
+#define PSC_SPIPCR_SS (1 << 4)
+#define PSC_SPIPCR_TC (1 << 2)
+#define PSC_SPIPCR_MS (1 << 0)
+
+/* SPI Status register (read only). */
+#define PSC_SPISTAT_RF (1 << 13)
+#define PSC_SPISTAT_RE (1 << 12)
+#define PSC_SPISTAT_RR (1 << 11)
+#define PSC_SPISTAT_TF (1 << 10)
+#define PSC_SPISTAT_TE (1 << 9)
+#define PSC_SPISTAT_TR (1 << 8)
+#define PSC_SPISTAT_SB (1 << 5)
+#define PSC_SPISTAT_MB (1 << 4)
+#define PSC_SPISTAT_DI (1 << 2)
+#define PSC_SPISTAT_DR (1 << 1)
+#define PSC_SPISTAT_SR (1 << 0)
+
+/* SPI Event Register. */
+#define PSC_SPIEVNT_MM (1 << 16)
+#define PSC_SPIEVNT_RR (1 << 13)
+#define PSC_SPIEVNT_RO (1 << 12)
+#define PSC_SPIEVNT_RU (1 << 11)
+#define PSC_SPIEVNT_TR (1 << 10)
+#define PSC_SPIEVNT_TO (1 << 9)
+#define PSC_SPIEVNT_TU (1 << 8)
+#define PSC_SPIEVNT_SD (1 << 5)
+#define PSC_SPIEVNT_MD (1 << 4)
+
+/* Transmit register control. */
+#define PSC_SPITXRX_LC (1 << 29)
+#define PSC_SPITXRX_SR (1 << 28)
+
+/* SMBus Config Register. */
+#define PSC_SMBCFG_RT_MASK (3 << 30)
+#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
+#define PSC_SMBCFG_RT_FIFO2 (1 << 30)
+#define PSC_SMBCFG_RT_FIFO4 (2 << 30)
+#define PSC_SMBCFG_RT_FIFO8 (3 << 30)
+
+#define PSC_SMBCFG_TT_MASK (3 << 28)
+#define PSC_SMBCFG_TT_FIFO1 (0 << 28)
+#define PSC_SMBCFG_TT_FIFO2 (1 << 28)
+#define PSC_SMBCFG_TT_FIFO4 (2 << 28)
+#define PSC_SMBCFG_TT_FIFO8 (3 << 28)
+
+#define PSC_SMBCFG_DD_DISABLE (1 << 27)
+#define PSC_SMBCFG_DE_ENABLE (1 << 26)
+
+#define PSC_SMBCFG_SET_DIV(x) (((x) & 0x03) << 13)
+#define PSC_SMBCFG_DIV2 0
+#define PSC_SMBCFG_DIV4 1
+#define PSC_SMBCFG_DIV8 2
+#define PSC_SMBCFG_DIV16 3
+
+#define PSC_SMBCFG_GCE (1 << 9)
+#define PSC_SMBCFG_SFM (1 << 8)
+
+#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1)
+
+/* SMBus Mask Register. */
+#define PSC_SMBMSK_DN (1 << 30)
+#define PSC_SMBMSK_AN (1 << 29)
+#define PSC_SMBMSK_AL (1 << 28)
+#define PSC_SMBMSK_RR (1 << 13)
+#define PSC_SMBMSK_RO (1 << 12)
+#define PSC_SMBMSK_RU (1 << 11)
+#define PSC_SMBMSK_TR (1 << 10)
+#define PSC_SMBMSK_TO (1 << 9)
+#define PSC_SMBMSK_TU (1 << 8)
+#define PSC_SMBMSK_SD (1 << 5)
+#define PSC_SMBMSK_MD (1 << 4)
+#define PSC_SMBMSK_ALLMASK (PSC_SMBMSK_DN | PSC_SMBMSK_AN | \
+ PSC_SMBMSK_AL | PSC_SMBMSK_RR | \
+ PSC_SMBMSK_RO | PSC_SMBMSK_TO | \
+ PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
+ PSC_SMBMSK_MD)
+
+/* SMBus Protocol Control Register. */
+#define PSC_SMBPCR_DC (1 << 2)
+#define PSC_SMBPCR_MS (1 << 0)
+
+/* SMBus Status register (read only). */
+#define PSC_SMBSTAT_BB (1 << 28)
+#define PSC_SMBSTAT_RF (1 << 13)
+#define PSC_SMBSTAT_RE (1 << 12)
+#define PSC_SMBSTAT_RR (1 << 11)
+#define PSC_SMBSTAT_TF (1 << 10)
+#define PSC_SMBSTAT_TE (1 << 9)
+#define PSC_SMBSTAT_TR (1 << 8)
+#define PSC_SMBSTAT_SB (1 << 5)
+#define PSC_SMBSTAT_MB (1 << 4)
+#define PSC_SMBSTAT_DI (1 << 2)
+#define PSC_SMBSTAT_DR (1 << 1)
+#define PSC_SMBSTAT_SR (1 << 0)
+
+/* SMBus Event Register. */
+#define PSC_SMBEVNT_DN (1 << 30)
+#define PSC_SMBEVNT_AN (1 << 29)
+#define PSC_SMBEVNT_AL (1 << 28)
+#define PSC_SMBEVNT_RR (1 << 13)
+#define PSC_SMBEVNT_RO (1 << 12)
+#define PSC_SMBEVNT_RU (1 << 11)
+#define PSC_SMBEVNT_TR (1 << 10)
+#define PSC_SMBEVNT_TO (1 << 9)
+#define PSC_SMBEVNT_TU (1 << 8)
+#define PSC_SMBEVNT_SD (1 << 5)
+#define PSC_SMBEVNT_MD (1 << 4)
+#define PSC_SMBEVNT_ALLCLR (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \
+ PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \
+ PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \
+ PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
+ PSC_SMBEVNT_MD)
+
+/* Transmit register control. */
+#define PSC_SMBTXRX_RSR (1 << 28)
+#define PSC_SMBTXRX_STP (1 << 29)
+#define PSC_SMBTXRX_DATAMASK 0xff
+
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30)
+#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25)
+#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20)
+#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15)
+#define PSC_SMBTMR_SET_SU(x) (((x) & 0x1f) << 10)
+#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5)
+#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0)
+
+#endif /* _AU1000_PSC_H_ */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
new file mode 100644
index 0000000..ecfbb5a
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
@@ -0,0 +1,95 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_MACH_AU1X00_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_AU1X00_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_ftlb 0
+#define cpu_has_tlbinv 0
+#define cpu_has_segments 0
+#define cpu_has_eva 0
+#define cpu_has_htw 0
+#define cpu_has_ldpte 0
+#define cpu_has_rixiex 0
+#define cpu_has_maar 0
+#define cpu_has_rw_llb 0
+#define cpu_has_3kex 0
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+#define cpu_has_guestctl0ext 0
+#define cpu_has_guestctl1 0
+#define cpu_has_guestctl2 0
+#define cpu_has_guestid 0
+#define cpu_has_drg 0
+#define cpu_has_bp_ghist 0
+#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_rixi 0
+#define cpu_has_mmips 0
+#define cpu_has_lpa 0
+#define cpu_has_mhv 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 1
+#define cpu_has_pindexed_dcache 0
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips32r6 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mips64r6 0
+#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
+#define cpu_has_dsp3 0
+#define cpu_has_mipsmt 0
+#define cpu_has_vp 0
+#define cpu_has_userlocal 0
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_vint 0
+#define cpu_has_veic 0
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 0
+#define cpu_tcache_line_size() 0
+
+#define cpu_has_perf_cntr_intr_bit 0
+#define cpu_has_vz 0
+#define cpu_has_msa 0
+#define cpu_has_ufr 0
+#define cpu_has_fre 0
+#define cpu_has_cdmm 0
+#define cpu_has_small_pages 0
+#define cpu_has_nan_legacy 1
+#define cpu_has_nan_2008 1
+#define cpu_has_ebase_wg 0
+#define cpu_has_badinstr 0
+#define cpu_has_badinstrp 0
+#define cpu_has_contextconfig 0
+#define cpu_has_perf 0
+
+#endif /* __ASM_MACH_AU1X00_CPU_FEATURE_OVERRIDES_H */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
new file mode 100644
index 0000000..adde1fa
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -0,0 +1,532 @@
+/*
+ * GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200
+ *
+ * Copyright (c) 2009 Manuel Lauss.
+ *
+ * Licensed under the terms outlined in the file COPYING.
+ */
+
+#ifndef _ALCHEMY_GPIO_AU1000_H_
+#define _ALCHEMY_GPIO_AU1000_H_
+
+#include <asm/mach-au1x00/au1000.h>
+
+/* The default GPIO numberspace as documented in the Alchemy manuals.
+ * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block.
+ */
+#define ALCHEMY_GPIO1_BASE 0
+#define ALCHEMY_GPIO2_BASE 200
+
+#define ALCHEMY_GPIO1_NUM 32
+#define ALCHEMY_GPIO2_NUM 16
+#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
+#define ALCHEMY_GPIO2_MAX (ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1)
+
+#define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off))
+
+/* GPIO1 registers within SYS_ area */
+#define AU1000_SYS_TRIOUTRD 0x100
+#define AU1000_SYS_TRIOUTCLR 0x100
+#define AU1000_SYS_OUTPUTRD 0x108
+#define AU1000_SYS_OUTPUTSET 0x108
+#define AU1000_SYS_OUTPUTCLR 0x10C
+#define AU1000_SYS_PINSTATERD 0x110
+#define AU1000_SYS_PININPUTEN 0x110
+
+/* register offsets within GPIO2 block */
+#define AU1000_GPIO2_DIR 0x00
+#define AU1000_GPIO2_OUTPUT 0x08
+#define AU1000_GPIO2_PINSTATE 0x0C
+#define AU1000_GPIO2_INTENABLE 0x10
+#define AU1000_GPIO2_ENABLE 0x14
+
+struct gpio;
+
+static inline int au1000_gpio1_to_irq(int gpio)
+{
+ return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1000_gpio2_to_irq(int gpio)
+{
+ return -ENXIO;
+}
+
+static inline int au1000_irq_to_gpio(int irq)
+{
+ if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
+ return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
+
+ return -ENXIO;
+}
+
+static inline int au1500_gpio1_to_irq(int gpio)
+{
+ gpio -= ALCHEMY_GPIO1_BASE;
+
+ switch (gpio) {
+ case 0 ... 15:
+ case 20:
+ case 23 ... 28: return MAKE_IRQ(1, gpio);
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1500_gpio2_to_irq(int gpio)
+{
+ gpio -= ALCHEMY_GPIO2_BASE;
+
+ switch (gpio) {
+ case 0 ... 3: return MAKE_IRQ(1, 16 + gpio - 0);
+ case 4 ... 5: return MAKE_IRQ(1, 21 + gpio - 4);
+ case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6);
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1500_irq_to_gpio(int irq)
+{
+ switch (irq) {
+ case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
+ case AU1500_GPIO20_INT:
+ case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
+ case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
+ case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
+ case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
+ case AU1500_GPIO208_215_INT:
+ return ALCHEMY_GPIO2_BASE + 8;
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1100_gpio1_to_irq(int gpio)
+{
+ return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1100_gpio2_to_irq(int gpio)
+{
+ gpio -= ALCHEMY_GPIO2_BASE;
+
+ if ((gpio >= 8) && (gpio <= 15))
+ return MAKE_IRQ(0, 29); /* shared GPIO208_215 */
+
+ return -ENXIO;
+}
+
+static inline int au1100_irq_to_gpio(int irq)
+{
+ switch (irq) {
+ case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
+ case AU1100_GPIO208_215_INT:
+ return ALCHEMY_GPIO2_BASE + 8;
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1550_gpio1_to_irq(int gpio)
+{
+ gpio -= ALCHEMY_GPIO1_BASE;
+
+ switch (gpio) {
+ case 0 ... 15:
+ case 20 ... 28: return MAKE_IRQ(1, gpio);
+ case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16);
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1550_gpio2_to_irq(int gpio)
+{
+ gpio -= ALCHEMY_GPIO2_BASE;
+
+ switch (gpio) {
+ case 0: return MAKE_IRQ(1, 16);
+ case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */
+ case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6);
+ case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1550_irq_to_gpio(int irq)
+{
+ switch (irq) {
+ case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
+ case AU1550_GPIO200_INT:
+ case AU1550_GPIO201_205_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
+ case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
+ case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1200_gpio1_to_irq(int gpio)
+{
+ return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
+}
+
+static inline int au1200_gpio2_to_irq(int gpio)
+{
+ gpio -= ALCHEMY_GPIO2_BASE;
+
+ switch (gpio) {
+ case 0 ... 2: return MAKE_IRQ(0, 5 + gpio - 0);
+ case 3: return MAKE_IRQ(0, 22);
+ case 4 ... 7: return MAKE_IRQ(0, 24 + gpio - 4);
+ case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */
+ }
+
+ return -ENXIO;
+}
+
+static inline int au1200_irq_to_gpio(int irq)
+{
+ switch (irq) {
+ case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
+ case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
+ case AU1200_GPIO203_INT:
+ return ALCHEMY_GPIO2_BASE + 3;
+ case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
+ }
+
+ return -ENXIO;
+}
+
+/*
+ * GPIO1 block macros for common linux gpio functions.
+ */
+static inline void alchemy_gpio1_set_value(int gpio, int v)
+{
+ unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+ unsigned long r = v ? AU1000_SYS_OUTPUTSET : AU1000_SYS_OUTPUTCLR;
+ alchemy_wrsys(mask, r);
+}
+
+static inline int alchemy_gpio1_get_value(int gpio)
+{
+ unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+ return alchemy_rdsys(AU1000_SYS_PINSTATERD) & mask;
+}
+
+static inline int alchemy_gpio1_direction_input(int gpio)
+{
+ unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
+ alchemy_wrsys(mask, AU1000_SYS_TRIOUTCLR);
+ return 0;
+}
+
+static inline int alchemy_gpio1_direction_output(int gpio, int v)
+{
+ /* hardware switches to "output" mode when one of the two
+ * "set_value" registers is accessed.
+ */
+ alchemy_gpio1_set_value(gpio, v);
+ return 0;
+}
+
+static inline int alchemy_gpio1_is_valid(int gpio)
+{
+ return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX));
+}
+
+static inline int alchemy_gpio1_to_irq(int gpio)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ return au1000_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1100:
+ return au1100_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1500:
+ return au1500_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1550:
+ return au1550_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1200:
+ return au1200_gpio1_to_irq(gpio);
+ }
+ return -ENXIO;
+}
+
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + 0x110); /* the write op is key */
+ wmb();
+}
+
+/*
+ * GPIO2 block macros for common linux GPIO functions. The 'gpio'
+ * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
+ */
+static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
+ unsigned long d = __raw_readl(base + AU1000_GPIO2_DIR);
+
+ if (to_out)
+ d |= mask;
+ else
+ d &= ~mask;
+ __raw_writel(d, base + AU1000_GPIO2_DIR);
+ wmb();
+}
+
+static inline void alchemy_gpio2_set_value(int gpio, int v)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ unsigned long mask;
+ mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
+ __raw_writel(mask, base + AU1000_GPIO2_OUTPUT);
+ wmb();
+}
+
+static inline int alchemy_gpio2_get_value(int gpio)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ return __raw_readl(base + AU1000_GPIO2_PINSTATE) &
+ (1 << (gpio - ALCHEMY_GPIO2_BASE));
+}
+
+static inline int alchemy_gpio2_direction_input(int gpio)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ __alchemy_gpio2_mod_dir(gpio, 0);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static inline int alchemy_gpio2_direction_output(int gpio, int v)
+{
+ unsigned long flags;
+ alchemy_gpio2_set_value(gpio, v);
+ local_irq_save(flags);
+ __alchemy_gpio2_mod_dir(gpio, 1);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static inline int alchemy_gpio2_is_valid(int gpio)
+{
+ return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX));
+}
+
+static inline int alchemy_gpio2_to_irq(int gpio)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ return au1000_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1100:
+ return au1100_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1500:
+ return au1500_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1550:
+ return au1550_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1200:
+ return au1200_gpio2_to_irq(gpio);
+ }
+ return -ENXIO;
+}
+
+/**********************************************************************/
+
+/* GPIO2 shared interrupts and control */
+
+static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ unsigned long r = __raw_readl(base + AU1000_GPIO2_INTENABLE);
+ if (en)
+ r |= 1 << gpio2;
+ else
+ r &= ~(1 << gpio2);
+ __raw_writel(r, base + AU1000_GPIO2_INTENABLE);
+ wmb();
+}
+
+/**
+ * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution.
+ * @gpio2: The GPIO2 pin to activate (200...215).
+ *
+ * GPIO208-215 have one shared interrupt line to the INTC. They are
+ * and'ed with a per-pin enable bit and finally or'ed together to form
+ * a single irq request (useful for active-high sources).
+ * With this function, a pins' individual contribution to the int request
+ * can be enabled. As with all other GPIO-based interrupts, the INTC
+ * must be programmed to accept the GPIO208_215 interrupt as well.
+ *
+ * NOTE: Calling this macro is only necessary for GPIO208-215; all other
+ * GPIO2-based interrupts have their own request to the INTC. Please
+ * consult your Alchemy databook for more information!
+ *
+ * NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request
+ * line to the INTC, GPIO201_205. This function can be used for those
+ * as well.
+ *
+ * NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace
+ * (200-215 by default). No sanity checks are made,
+ */
+static inline void alchemy_gpio2_enable_int(int gpio2)
+{
+ unsigned long flags;
+
+ gpio2 -= ALCHEMY_GPIO2_BASE;
+
+ /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ case ALCHEMY_CPU_AU1500:
+ gpio2 -= 8;
+ }
+
+ local_irq_save(flags);
+ __alchemy_gpio2_mod_int(gpio2, 1);
+ local_irq_restore(flags);
+}
+
+/**
+ * alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution.
+ * @gpio2: The GPIO2 pin to activate (200...215).
+ *
+ * see function alchemy_gpio2_enable_int() for more information.
+ */
+static inline void alchemy_gpio2_disable_int(int gpio2)
+{
+ unsigned long flags;
+
+ gpio2 -= ALCHEMY_GPIO2_BASE;
+
+ /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ case ALCHEMY_CPU_AU1500:
+ gpio2 -= 8;
+ }
+
+ local_irq_save(flags);
+ __alchemy_gpio2_mod_int(gpio2, 0);
+ local_irq_restore(flags);
+}
+
+/**
+ * alchemy_gpio2_enable - Activate GPIO2 block.
+ *
+ * The GPIO2 block must be enabled excplicitly to work. On systems
+ * where this isn't done by the bootloader, this macro can be used.
+ */
+static inline void alchemy_gpio2_enable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ __raw_writel(3, base + AU1000_GPIO2_ENABLE); /* reset, clock enabled */
+ wmb();
+ __raw_writel(1, base + AU1000_GPIO2_ENABLE); /* clock enabled */
+ wmb();
+}
+
+/**
+ * alchemy_gpio2_disable - disable GPIO2 block.
+ *
+ * Disable and put GPIO2 block in low-power mode.
+ */
+static inline void alchemy_gpio2_disable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ __raw_writel(2, base + AU1000_GPIO2_ENABLE); /* reset, clock disabled */
+ wmb();
+}
+
+/**********************************************************************/
+
+/* wrappers for on-chip gpios; can be used before gpio chips have been
+ * registered with gpiolib.
+ */
+static inline int alchemy_gpio_direction_input(int gpio)
+{
+ return (gpio >= ALCHEMY_GPIO2_BASE) ?
+ alchemy_gpio2_direction_input(gpio) :
+ alchemy_gpio1_direction_input(gpio);
+}
+
+static inline int alchemy_gpio_direction_output(int gpio, int v)
+{
+ return (gpio >= ALCHEMY_GPIO2_BASE) ?
+ alchemy_gpio2_direction_output(gpio, v) :
+ alchemy_gpio1_direction_output(gpio, v);
+}
+
+static inline int alchemy_gpio_get_value(int gpio)
+{
+ return (gpio >= ALCHEMY_GPIO2_BASE) ?
+ alchemy_gpio2_get_value(gpio) :
+ alchemy_gpio1_get_value(gpio);
+}
+
+static inline void alchemy_gpio_set_value(int gpio, int v)
+{
+ if (gpio >= ALCHEMY_GPIO2_BASE)
+ alchemy_gpio2_set_value(gpio, v);
+ else
+ alchemy_gpio1_set_value(gpio, v);
+}
+
+static inline int alchemy_gpio_is_valid(int gpio)
+{
+ return (gpio >= ALCHEMY_GPIO2_BASE) ?
+ alchemy_gpio2_is_valid(gpio) :
+ alchemy_gpio1_is_valid(gpio);
+}
+
+static inline int alchemy_gpio_cansleep(int gpio)
+{
+ return 0; /* Alchemy never gets tired */
+}
+
+static inline int alchemy_gpio_to_irq(int gpio)
+{
+ return (gpio >= ALCHEMY_GPIO2_BASE) ?
+ alchemy_gpio2_to_irq(gpio) :
+ alchemy_gpio1_to_irq(gpio);
+}
+
+static inline int alchemy_irq_to_gpio(int irq)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ return au1000_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1100:
+ return au1100_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1500:
+ return au1500_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1550:
+ return au1550_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1200:
+ return au1200_irq_to_gpio(irq);
+ }
+ return -ENXIO;
+}
+
+#endif /* _ALCHEMY_GPIO_AU1000_H_ */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
new file mode 100644
index 0000000..d25846a
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles.
+ *
+ * Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#ifndef _GPIO_AU1300_H_
+#define _GPIO_AU1300_H_
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+struct gpio;
+struct gpio_chip;
+
+/* with the current GPIC design, up to 128 GPIOs are possible.
+ * The only implementation so far is in the Au1300, which has 75 externally
+ * available GPIOs.
+ */
+#define AU1300_GPIO_BASE 0
+#define AU1300_GPIO_NUM 75
+#define AU1300_GPIO_MAX (AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1)
+
+#define AU1300_GPIC_ADDR \
+ (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR)
+
+static inline int au1300_gpio_get_value(unsigned int gpio)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ int bit;
+
+ gpio -= AU1300_GPIO_BASE;
+ roff += GPIC_GPIO_BANKOFF(gpio);
+ bit = GPIC_GPIO_TO_BIT(gpio);
+ return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit;
+}
+
+static inline int au1300_gpio_direction_input(unsigned int gpio)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ unsigned long bit;
+
+ gpio -= AU1300_GPIO_BASE;
+
+ roff += GPIC_GPIO_BANKOFF(gpio);
+ bit = GPIC_GPIO_TO_BIT(gpio);
+ __raw_writel(bit, roff + AU1300_GPIC_DEVCLR);
+ wmb();
+
+ return 0;
+}
+
+static inline int au1300_gpio_set_value(unsigned int gpio, int v)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ unsigned long bit;
+
+ gpio -= AU1300_GPIO_BASE;
+
+ roff += GPIC_GPIO_BANKOFF(gpio);
+ bit = GPIC_GPIO_TO_BIT(gpio);
+ __raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL
+ : AU1300_GPIC_PINVALCLR));
+ wmb();
+
+ return 0;
+}
+
+static inline int au1300_gpio_direction_output(unsigned int gpio, int v)
+{
+ /* hw switches to output automatically */
+ return au1300_gpio_set_value(gpio, v);
+}
+
+static inline int au1300_gpio_to_irq(unsigned int gpio)
+{
+ return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE);
+}
+
+static inline int au1300_irq_to_gpio(unsigned int irq)
+{
+ return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE;
+}
+
+static inline int au1300_gpio_is_valid(unsigned int gpio)
+{
+ int ret;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1300:
+ ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX));
+ break;
+ default:
+ ret = 0;
+ }
+ return ret;
+}
+
+static inline int au1300_gpio_cansleep(unsigned int gpio)
+{
+ return 0;
+}
+
+/* hardware remembers gpio 0-63 levels on powerup */
+static inline int au1300_gpio_getinitlvl(unsigned int gpio)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ unsigned long v;
+
+ if (unlikely(gpio > 63))
+ return 0;
+ else if (gpio > 31) {
+ gpio -= 32;
+ roff += 4;
+ }
+
+ v = __raw_readl(roff + AU1300_GPIC_RSTVAL);
+ return (v >> gpio) & 1;
+}
+
+/**********************************************************************/
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+* Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+* A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+* the boards' gpio.h must provide the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+* inlinable gpio functions are provided which enable access to the
+* Au1300 gpios only by using the numbers straight out of the data-
+* sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accessible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifndef CONFIG_GPIOLIB
+
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300
+
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
+
+static inline int gpio_direction_input(unsigned int gpio)
+{
+ return au1300_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned int gpio, int v)
+{
+ return au1300_gpio_direction_output(gpio, v);
+}
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return au1300_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int v)
+{
+ au1300_gpio_set_value(gpio, v);
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(unsigned int gpio)
+{
+ return au1300_gpio_is_valid(gpio);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return au1300_gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return au1300_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return au1300_irq_to_gpio(irq);
+}
+
+static inline int gpio_request(unsigned int gpio, const char *label)
+{
+ return 0;
+}
+
+static inline int gpio_request_one(unsigned gpio,
+ unsigned long flags, const char *label)
+{
+ return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */
+
+#endif /* CONFIG GPIOLIB */
+
+#endif /* _GPIO_AU1300_H_ */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/ioremap.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/ioremap.h
new file mode 100644
index 0000000..f6877ed
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * include/asm-mips/mach-au1x00/ioremap.h
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/types.h>
+
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+extern phys_addr_t __fixup_bigphys_addr(phys_addr_t, phys_addr_t);
+#else
+static inline phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+{
+ return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+{
+ return __fixup_bigphys_addr(phys_addr, size);
+}
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+ unsigned long flags)
+{
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/marvell/linux/arch/mips/include/asm/mach-au1x00/prom.h b/marvell/linux/arch/mips/include/asm/mach-au1x00/prom.h
new file mode 100644
index 0000000..c62ee02
--- /dev/null
+++ b/marvell/linux/arch/mips/include/asm/mach-au1x00/prom.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __AU1X00_PROM_H
+#define __AU1X00_PROM_H
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+
+extern void prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+extern int prom_get_ethernet_addr(char *ethernet_addr);
+
+#endif