ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/mips/sgi-ip22/ip22-eisa.c b/marvell/linux/arch/mips/sgi-ip22/ip22-eisa.c
new file mode 100644
index 0000000..a0a7922
--- /dev/null
+++ b/marvell/linux/arch/mips/sgi-ip22/ip22-eisa.c
@@ -0,0 +1,145 @@
+/*
+ * Basic EISA bus support for the SGI Indigo-2.
+ *
+ * (C) 2002 Pascal Dameme <netinet@freesurf.fr>
+ * and Marc Zyngier <mzyngier@freesurf.fr>
+ *
+ * This code is released under both the GPL version 2 and BSD
+ * licenses. Either license may be used.
+ *
+ * This code offers a very basic support for this EISA bus present in
+ * the SGI Indigo-2. It currently only supports PIO (forget about DMA
+ * for the time being). This is enough for a low-end ethernet card,
+ * but forget about your favorite SCSI card...
+ *
+ * TODO :
+ * - Fix bugs...
+ * - Add ISA support
+ * - Add DMA (yeah, right...).
+ * - Fix more bugs.
+ */
+
+#include <linux/eisa.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/sgi/ioc.h>
+#include <asm/sgi/mc.h>
+#include <asm/sgi/ip22.h>
+#include <asm/i8259.h>
+
+/* I2 has four EISA slots. */
+#define IP22_EISA_MAX_SLOTS 4
+#define EISA_MAX_IRQ 16
+
+#define EIU_MODE_REG 0x0001ffc0
+#define EIU_STAT_REG 0x0001ffc4
+#define EIU_PREMPT_REG 0x0001ffc8
+#define EIU_QUIET_REG 0x0001ffcc
+#define EIU_INTRPT_ACK 0x00010004
+
+static char __init *decode_eisa_sig(unsigned long addr)
+{
+ static char sig_str[EISA_SIG_LEN] __initdata;
+ u8 sig[4];
+ u16 rev;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ sig[i] = inb(addr + i);
+
+ if (!i && (sig[0] & 0x80))
+ return NULL;
+ }
+
+ sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
+ sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
+ sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
+ rev = (sig[2] << 8) | sig[3];
+ sprintf(sig_str + 3, "%04X", rev);
+
+ return sig_str;
+}
+
+static irqreturn_t ip22_eisa_intr(int irq, void *dev_id)
+{
+ u8 eisa_irq = inb(EIU_INTRPT_ACK);
+
+ inb(EISA_DMA1_STATUS);
+ inb(EISA_DMA2_STATUS);
+
+ if (eisa_irq < EISA_MAX_IRQ) {
+ do_IRQ(eisa_irq);
+ return IRQ_HANDLED;
+ }
+
+ /* Oops, Bad Stuff Happened... */
+ printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+
+ outb(0x20, EISA_INT2_CTRL);
+ outb(0x20, EISA_INT1_CTRL);
+
+ return IRQ_NONE;
+}
+
+static struct irqaction eisa_action = {
+ .handler = ip22_eisa_intr,
+ .name = "EISA",
+};
+
+int __init ip22_eisa_init(void)
+{
+ int i, c;
+ char *str;
+
+ if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
+ printk(KERN_INFO "EISA: bus not present.\n");
+ return 1;
+ }
+
+ printk(KERN_INFO "EISA: Probing bus...\n");
+ for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) {
+ if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) {
+ printk(KERN_INFO "EISA: slot %d : %s detected.\n",
+ i, str);
+ c++;
+ }
+ }
+ printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s");
+#ifdef CONFIG_ISA
+ printk(KERN_INFO "ISA support compiled in.\n");
+#endif
+
+ /* Warning : BlackMagicAhead(tm).
+ Please wave your favorite dead chicken over the busses */
+
+ /* First say hello to the EIU */
+ outl(0x0000FFFF, EIU_PREMPT_REG);
+ outl(1, EIU_QUIET_REG);
+ outl(0x40f3c07F, EIU_MODE_REG);
+
+ /* Now be nice to the EISA chipset */
+ outb(1, EISA_EXT_NMI_RESET_CTRL);
+ udelay(50); /* Wait long enough for the dust to settle */
+ outb(0, EISA_EXT_NMI_RESET_CTRL);
+ outb(0, EISA_DMA2_WRITE_SINGLE);
+
+ init_i8259_irqs();
+
+ /* Cannot use request_irq because of kmalloc not being ready at such
+ * an early stage. Yes, I've been bitten... */
+ setup_irq(SGI_EISA_IRQ, &eisa_action);
+
+ EISA_bus = 1;
+ return 0;
+}