ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/parisc/include/uapi/asm/pdc.h b/marvell/linux/arch/parisc/include/uapi/asm/pdc.h
new file mode 100644
index 0000000..ee90355
--- /dev/null
+++ b/marvell/linux/arch/parisc/include/uapi/asm/pdc.h
@@ -0,0 +1,695 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PARISC_PDC_H
+#define _UAPI_PARISC_PDC_H
+
+/*
+ * PDC return values ...
+ * All PDC calls return a subset of these errors.
+ */
+
+#define PDC_WARN 3 /* Call completed with a warning */
+#define PDC_REQ_ERR_1 2 /* See above */
+#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
+#define PDC_OK 0 /* Call completed successfully */
+#define PDC_BAD_PROC -1 /* Called non-existent procedure*/
+#define PDC_BAD_OPTION -2 /* Called with non-existent option */
+#define PDC_ERROR -3 /* Call could not complete without an error */
+#define PDC_NE_MOD -5 /* Module not found */
+#define PDC_NE_CELL_MOD -7 /* Cell module not found */
+#define PDC_NE_BOOTDEV -9 /* Cannot locate a console device or boot device */
+#define PDC_INVALID_ARG -10 /* Called with an invalid argument */
+#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
+#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
+
+/*
+ * PDC entry points...
+ */
+
+#define PDC_POW_FAIL 1 /* perform a power-fail */
+#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */
+
+#define PDC_CHASSIS 2 /* PDC-chassis functions */
+#define PDC_CHASSIS_DISP 0 /* update chassis display */
+#define PDC_CHASSIS_WARN 1 /* return chassis warnings */
+#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
+#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */
+
+#define PDC_PIM 3 /* Get PIM data */
+#define PDC_PIM_HPMC 0 /* Transfer HPMC data */
+#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
+#define PDC_PIM_LPMC 2 /* Transfer HPMC data */
+#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
+#define PDC_PIM_TOC 4 /* Transfer TOC data */
+
+#define PDC_MODEL 4 /* PDC model information call */
+#define PDC_MODEL_INFO 0 /* returns information */
+#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
+#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
+#define PDC_MODEL_SYSMODEL 3 /* return system model info */
+#define PDC_MODEL_ENSPEC 4 /* enable specific option */
+#define PDC_MODEL_DISPEC 5 /* disable specific option */
+#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
+#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
+#define PDC_MODEL_OS64 (1 << 0)
+#define PDC_MODEL_OS32 (1 << 1)
+#define PDC_MODEL_IOPDIR_FDC (1 << 2)
+#define PDC_MODEL_NVA_MASK (3 << 4)
+#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
+#define PDC_MODEL_NVA_SLOW (1 << 4)
+#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
+#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
+#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
+#define PDC_MODEL_GET_PLATFORM_INFO 10 /* returns platform info */
+#define PDC_MODEL_GET_INSTALL_KERNEL 11 /* returns kernel for installation */
+
+#define PA89_INSTRUCTION_SET 0x4 /* capabilities returned */
+#define PA90_INSTRUCTION_SET 0x8
+
+#define PDC_CACHE 5 /* return/set cache (& TLB) info*/
+#define PDC_CACHE_INFO 0 /* returns information */
+#define PDC_CACHE_SET_COH 1 /* set coherence state */
+#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */
+
+#define PDC_HPA 6 /* return HPA of processor */
+#define PDC_HPA_PROCESSOR 0
+#define PDC_HPA_MODULES 1
+
+#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
+#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */
+
+#define PDC_IODC 8 /* talk to IODC */
+#define PDC_IODC_READ 0 /* read IODC entry point */
+/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
+#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
+/* 1, 2 obsolete - HVERSION dependent*/
+#define PDC_IODC_RI_INIT 3 /* Initialize module */
+#define PDC_IODC_RI_IO 4 /* Module input/output */
+#define PDC_IODC_RI_SPA 5 /* Module input/output */
+#define PDC_IODC_RI_CONFIG 6 /* Module input/output */
+/* 7 obsolete - HVERSION dependent */
+#define PDC_IODC_RI_TEST 8 /* Module input/output */
+#define PDC_IODC_RI_TLB 9 /* Module input/output */
+#define PDC_IODC_NINIT 2 /* non-destructive init */
+#define PDC_IODC_DINIT 3 /* destructive init */
+#define PDC_IODC_MEMERR 4 /* check for memory errors */
+#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
+#define PDC_IODC_BUS_ERROR -4 /* bus error return value */
+#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
+#define PDC_IODC_COUNT -6 /* count is too small */
+
+#define PDC_TOD 9 /* time-of-day clock (TOD) */
+#define PDC_TOD_READ 0 /* read TOD */
+#define PDC_TOD_WRITE 1 /* write TOD */
+#define PDC_TOD_CALIBRATE 2 /* calibrate timers */
+
+#define PDC_STABLE 10 /* stable storage (sprockets) */
+#define PDC_STABLE_READ 0
+#define PDC_STABLE_WRITE 1
+#define PDC_STABLE_RETURN_SIZE 2
+#define PDC_STABLE_VERIFY_CONTENTS 3
+#define PDC_STABLE_INITIALIZE 4
+
+#define PDC_NVOLATILE 11 /* often not implemented */
+#define PDC_NVOLATILE_READ 0
+#define PDC_NVOLATILE_WRITE 1
+#define PDC_NVOLATILE_RETURN_SIZE 2
+#define PDC_NVOLATILE_VERIFY_CONTENTS 3
+#define PDC_NVOLATILE_INITIALIZE 4
+
+#define PDC_ADD_VALID 12 /* Memory validation PDC call */
+#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */
+
+#define PDC_DEBUG 14 /* Obsolete */
+
+#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */
+
+#define PDC_PROC 16 /* (sprockets) */
+
+#define PDC_CONFIG 17 /* (sprockets) */
+#define PDC_CONFIG_DECONFIG 0
+#define PDC_CONFIG_DRECONFIG 1
+#define PDC_CONFIG_DRETURN_CONFIG 2
+
+#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
+#define PDC_BTLB_INFO 0 /* returns parameter */
+#define PDC_BTLB_INSERT 1 /* insert BTLB entry */
+#define PDC_BTLB_PURGE 2 /* purge BTLB entries */
+#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */
+
+#define PDC_TLB 19 /* manage hardware TLB miss handling */
+#define PDC_TLB_INFO 0 /* returns parameter */
+#define PDC_TLB_SETUP 1 /* set up miss handling */
+
+#define PDC_MEM 20 /* Manage memory */
+#define PDC_MEM_MEMINFO 0 /* Return PDT info */
+#define PDC_MEM_ADD_PAGE 1 /* Add page to PDT */
+#define PDC_MEM_CLEAR_PDT 2 /* Clear PDT */
+#define PDC_MEM_READ_PDT 3 /* Read PDT entry */
+#define PDC_MEM_RESET_CLEAR 4 /* Reset PDT clear flag */
+#define PDC_MEM_GOODMEM 5 /* Set good_mem value */
+#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
+#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
+#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
+#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
+
+#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
+#define PDC_MEM_RET_DUPLICATE_ENTRY 4
+#define PDC_MEM_RET_BUF_SIZE_SMALL 1
+#define PDC_MEM_RET_PDT_FULL -11
+#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
+
+#define PDC_PSW 21 /* Get/Set default System Mask */
+#define PDC_PSW_MASK 0 /* Return mask */
+#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
+#define PDC_PSW_SET_DEFAULTS 2 /* Set default */
+#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
+#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */
+
+#define PDC_SYSTEM_MAP 22 /* find system modules */
+#define PDC_FIND_MODULE 0
+#define PDC_FIND_ADDRESS 1
+#define PDC_TRANSLATE_PATH 2
+
+#define PDC_SOFT_POWER 23 /* soft power switch */
+#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
+#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */
+
+#define PDC_ALLOC 24 /* allocate static storage for PDC & IODC */
+
+#define PDC_CRASH_PREP 25 /* Prepare system for crash dump */
+#define PDC_CRASH_DUMP 0 /* Do platform specific preparations for dump */
+#define PDC_CRASH_LOG_CEC_ERROR 1 /* Dump hardware registers */
+
+#define PDC_SCSI_PARMS 26 /* Get and set SCSI parameters */
+#define PDC_SCSI_GET_PARMS 0 /* Get SCSI parameters for I/O device */
+#define PDC_SCSI_SET_PARMS 1 /* Set SCSI parameters for I/O device */
+
+/* HVERSION dependent */
+
+/* The PDC_MEM_MAP calls */
+#define PDC_MEM_MAP 128 /* on s700: return page info */
+#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */
+
+#define PDC_EEPROM 129 /* EEPROM access */
+#define PDC_EEPROM_READ_WORD 0
+#define PDC_EEPROM_WRITE_WORD 1
+#define PDC_EEPROM_READ_BYTE 2
+#define PDC_EEPROM_WRITE_BYTE 3
+#define PDC_EEPROM_EEPROM_PASSWORD -1000
+
+#define PDC_NVM 130 /* NVM (non-volatile memory) access */
+#define PDC_NVM_READ_WORD 0
+#define PDC_NVM_WRITE_WORD 1
+#define PDC_NVM_READ_BYTE 2
+#define PDC_NVM_WRITE_BYTE 3
+
+#define PDC_SEED_ERROR 132 /* (sprockets) */
+
+#define PDC_IO 135 /* log error info, reset IO system */
+#define PDC_IO_READ_AND_CLEAR_ERRORS 0
+#define PDC_IO_RESET 1
+#define PDC_IO_RESET_DEVICES 2
+/* sets bits 6&7 (little endian) of the HcControl Register */
+#define PDC_IO_USB_SUSPEND 0xC000000000000000
+#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
+#define PDC_IO_NO_SUSPEND -6 /* return value */
+
+#define PDC_BROADCAST_RESET 136 /* reset all processors */
+#define PDC_DO_RESET 0 /* option: perform a broadcast reset */
+#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
+#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
+#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */
+
+#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
+#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */
+
+#define PDC_LAN_STATION_ID_SIZE 6
+
+#define PDC_CHECK_RANGES 139 /* (sprockets) */
+
+#define PDC_NV_SECTIONS 141 /* (sprockets) */
+
+#define PDC_PERFORMANCE 142 /* performance monitoring */
+
+#define PDC_SYSTEM_INFO 143 /* system information */
+#define PDC_SYSINFO_RETURN_INFO_SIZE 0
+#define PDC_SYSINFO_RRETURN_SYS_INFO 1
+#define PDC_SYSINFO_RRETURN_ERRORS 2
+#define PDC_SYSINFO_RRETURN_WARNINGS 3
+#define PDC_SYSINFO_RETURN_REVISIONS 4
+#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
+#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
+
+#define PDC_RDR 144 /* (sprockets) */
+#define PDC_RDR_READ_BUFFER 0
+#define PDC_RDR_READ_SINGLE 1
+#define PDC_RDR_WRITE_SINGLE 2
+
+#define PDC_INTRIGUE 145 /* (sprockets) */
+#define PDC_INTRIGUE_WRITE_BUFFER 0
+#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
+#define PDC_INTRIGUE_START_CPU_COUNTERS 2
+#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
+
+#define PDC_STI 146 /* STI access */
+/* same as PDC_PCI_XXX values (see below) */
+
+/* Legacy PDC definitions for same stuff */
+#define PDC_PCI_INDEX 147
+#define PDC_PCI_INTERFACE_INFO 0
+#define PDC_PCI_SLOT_INFO 1
+#define PDC_PCI_INFLIGHT_BYTES 2
+#define PDC_PCI_READ_CONFIG 3
+#define PDC_PCI_WRITE_CONFIG 4
+#define PDC_PCI_READ_PCI_IO 5
+#define PDC_PCI_WRITE_PCI_IO 6
+#define PDC_PCI_READ_CONFIG_DELAY 7
+#define PDC_PCI_UPDATE_CONFIG_DELAY 8
+#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
+#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
+#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
+#define PDC_PCI_PCI_RESERVED 12
+#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
+#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
+#define PDC_PCI_PCI_INT_ROUTE 14
+#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
+#define PDC_PCI_READ_MON_TYPE 15
+#define PDC_PCI_WRITE_MON_TYPE 16
+
+#define PDC_RELOCATE 149 /* (sprockets) */
+#define PDC_RELOCATE_GET_RELOCINFO 0
+#define PDC_RELOCATE_CHECKSUM 1
+#define PDC_RELOCATE_RELOCATE 2
+
+/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
+#define PDC_INITIATOR 163
+#define PDC_GET_INITIATOR 0
+#define PDC_SET_INITIATOR 1
+#define PDC_DELETE_INITIATOR 2
+#define PDC_RETURN_TABLE_SIZE 3
+#define PDC_RETURN_TABLE 4
+
+#define PDC_LINK 165 /* (sprockets) */
+#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
+#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
+
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define CL_NULL 0 /* invalid */
+#define CL_RANDOM 1 /* random access (as disk) */
+#define CL_SEQU 2 /* sequential access (as tape) */
+#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
+#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
+#define CL_DISPL 9 /* half-duplex console (display) */
+#define CL_FC 10 /* FiberChannel access media */
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST 2
+#define ENTRY_INIT_SRCH_NEXT 3
+#define ENTRY_INIT_MOD_DEV 4
+#define ENTRY_INIT_DEV 5
+#define ENTRY_INIT_MOD 6
+#define ENTRY_INIT_MSG 9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN 0
+#define ENTRY_IO_BOOTOUT 1
+#define ENTRY_IO_CIN 2
+#define ENTRY_IO_COUT 3
+#define ENTRY_IO_CLOSE 4
+#define ENTRY_IO_GETMSG 9
+#define ENTRY_IO_BBLOCK_IN 16
+#define ENTRY_IO_BBLOCK_OUT 17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
+
+/* constants for OS (NVM...) */
+#define OS_ID_NONE 0 /* Undefined OS ID */
+#define OS_ID_HPUX 1 /* HP-UX OS */
+#define OS_ID_MPEXL 2 /* MPE XL OS */
+#define OS_ID_OSF 3 /* OSF OS */
+#define OS_ID_HPRT 4 /* HP-RT OS */
+#define OS_ID_NOVEL 5 /* NOVELL OS */
+#define OS_ID_LINUX 6 /* Linux */
+
+
+/* constants for PDC_CHASSIS */
+#define OSTAT_OFF 0
+#define OSTAT_FLT 1
+#define OSTAT_TEST 2
+#define OSTAT_INIT 3
+#define OSTAT_SHUT 4
+#define OSTAT_WARN 5
+#define OSTAT_RUN 6
+#define OSTAT_ON 7
+
+/* Page Zero constant offsets used by the HPMC handler */
+#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+/* size of the pdc_result buffer for firmware.c */
+#define NUM_PDC_RESULT 32
+
+#if !defined(__ASSEMBLY__)
+
+/* flags of the device_path */
+#define PF_AUTOBOOT 0x80
+#define PF_AUTOSEARCH 0x40
+#define PF_TIMER 0x0F
+
+struct device_path { /* page 1-69 */
+ unsigned char flags; /* flags see above! */
+ unsigned char bc[6]; /* bus converter routing info */
+ unsigned char mod;
+ unsigned int layers[6];/* device-specific layer-info */
+} __attribute__((aligned(8))) ;
+
+struct pz_device {
+ struct device_path dp; /* see above */
+ /* struct iomod *hpa; */
+ unsigned int hpa; /* HPA base address */
+ /* char *spa; */
+ unsigned int spa; /* SPA base address */
+ /* int (*iodc_io)(struct iomod*, ...); */
+ unsigned int iodc_io; /* device entry point */
+ short pad; /* reserved */
+ unsigned short cl_class;/* see below */
+} __attribute__((aligned(8))) ;
+
+struct zeropage {
+ /* [0x000] initialize vectors (VEC) */
+ unsigned int vec_special; /* must be zero */
+ /* int (*vec_pow_fail)(void);*/
+ unsigned int vec_pow_fail; /* power failure handler */
+ /* int (*vec_toc)(void); */
+ unsigned int vec_toc;
+ unsigned int vec_toclen;
+ /* int (*vec_rendz)(void); */
+ unsigned int vec_rendz;
+ int vec_pow_fail_flen;
+ int vec_pad[10];
+
+ /* [0x040] reserved processor dependent */
+ int pad0[112];
+
+ /* [0x200] reserved */
+ int pad1[84];
+
+ /* [0x350] memory configuration (MC) */
+ int memc_cont; /* contiguous mem size (bytes) */
+ int memc_phsize; /* physical memory size */
+ int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
+ unsigned int mem_pdc_hi; /* used for 64-bit */
+
+ /* [0x360] various parameters for the boot-CPU */
+ /* unsigned int *mem_booterr[8]; */
+ unsigned int mem_booterr[8]; /* ptr to boot errors */
+ unsigned int mem_free; /* first location, where OS can be loaded */
+ /* struct iomod *mem_hpa; */
+ unsigned int mem_hpa; /* HPA of the boot-CPU */
+ /* int (*mem_pdc)(int, ...); */
+ unsigned int mem_pdc; /* PDC entry point */
+ unsigned int mem_10msec; /* number of clock ticks in 10msec */
+
+ /* [0x390] initial memory module (IMM) */
+ /* struct iomod *imm_hpa; */
+ unsigned int imm_hpa; /* HPA of the IMM */
+ int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
+ unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
+ unsigned int imm_max_mem; /* bytes of mem in IMM */
+
+ /* [0x3A0] boot console, display device and keyboard */
+ struct pz_device mem_cons; /* description of console device */
+ struct pz_device mem_boot; /* description of boot device */
+ struct pz_device mem_kbd; /* description of keyboard device */
+
+ /* [0x430] reserved */
+ int pad430[116];
+
+ /* [0x600] processor dependent */
+ unsigned int pad600[1];
+ unsigned int proc_sti; /* pointer to STI ROM */
+ unsigned int pad608[126];
+};
+
+struct pdc_chassis_info { /* for PDC_CHASSIS_INFO */
+ unsigned long actcnt; /* actual number of bytes returned */
+ unsigned long maxcnt; /* maximum number of bytes that could be returned */
+};
+
+struct pdc_coproc_cfg { /* for PDC_COPROC_CFG */
+ unsigned long ccr_functional;
+ unsigned long ccr_present;
+ unsigned long revision;
+ unsigned long model;
+};
+
+struct pdc_model { /* for PDC_MODEL */
+ unsigned long hversion;
+ unsigned long sversion;
+ unsigned long hw_id;
+ unsigned long boot_id;
+ unsigned long sw_id;
+ unsigned long sw_cap;
+ unsigned long arch_rev;
+ unsigned long pot_key;
+ unsigned long curr_key;
+ unsigned long width; /* default of PSW_W bit (1=enabled) */
+};
+
+struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */
+ unsigned long
+#ifdef __LP64__
+ cc_padW:32,
+#endif
+ cc_alias: 4, /* alias boundaries for virtual addresses */
+ cc_block: 4, /* to determine most efficient stride */
+ cc_line : 3, /* maximum amount written back as a result of store (multiple of 16 bytes) */
+ cc_shift: 2, /* how much to shift cc_block left */
+ cc_wt : 1, /* 0 = WT-Dcache, 1 = WB-Dcache */
+ cc_sh : 2, /* 0 = separate I/D-cache, else shared I/D-cache */
+ cc_cst : 3, /* 0 = incoherent D-cache, 1=coherent D-cache */
+ cc_pad1 : 10, /* reserved */
+ cc_hv : 3; /* hversion dependent */
+};
+
+struct pdc_tlb_cf { /* for PDC_CACHE (I/D-TLB's) */
+ unsigned long tc_pad0:12, /* reserved */
+#ifdef __LP64__
+ tc_padW:32,
+#endif
+ tc_sh : 2, /* 0 = separate I/D-TLB, else shared I/D-TLB */
+ tc_hv : 1, /* HV */
+ tc_page : 1, /* 0 = 2K page-size-machine, 1 = 4k page size */
+ tc_cst : 3, /* 0 = incoherent operations, else coherent operations */
+ tc_aid : 5, /* ITLB: width of access ids of processor (encoded!) */
+ tc_sr : 8; /* ITLB: width of space-registers (encoded) */
+};
+
+struct pdc_cache_info { /* main-PDC_CACHE-structure (caches & TLB's) */
+ /* I-cache */
+ unsigned long ic_size; /* size in bytes */
+ struct pdc_cache_cf ic_conf; /* configuration */
+ unsigned long ic_base; /* base-addr */
+ unsigned long ic_stride;
+ unsigned long ic_count;
+ unsigned long ic_loop;
+ /* D-cache */
+ unsigned long dc_size; /* size in bytes */
+ struct pdc_cache_cf dc_conf; /* configuration */
+ unsigned long dc_base; /* base-addr */
+ unsigned long dc_stride;
+ unsigned long dc_count;
+ unsigned long dc_loop;
+ /* Instruction-TLB */
+ unsigned long it_size; /* number of entries in I-TLB */
+ struct pdc_tlb_cf it_conf; /* I-TLB-configuration */
+ unsigned long it_sp_base;
+ unsigned long it_sp_stride;
+ unsigned long it_sp_count;
+ unsigned long it_off_base;
+ unsigned long it_off_stride;
+ unsigned long it_off_count;
+ unsigned long it_loop;
+ /* data-TLB */
+ unsigned long dt_size; /* number of entries in D-TLB */
+ struct pdc_tlb_cf dt_conf; /* D-TLB-configuration */
+ unsigned long dt_sp_base;
+ unsigned long dt_sp_stride;
+ unsigned long dt_sp_count;
+ unsigned long dt_off_base;
+ unsigned long dt_off_stride;
+ unsigned long dt_off_count;
+ unsigned long dt_loop;
+};
+
+/* Might need adjustment to work with 64-bit firmware */
+struct pdc_iodc { /* PDC_IODC */
+ unsigned char hversion_model;
+ unsigned char hversion;
+ unsigned char spa;
+ unsigned char type;
+ unsigned int sversion_rev:4;
+ unsigned int sversion_model:19;
+ unsigned int sversion_opt:8;
+ unsigned char rev;
+ unsigned char dep;
+ unsigned char features;
+ unsigned char pad1;
+ unsigned int checksum:16;
+ unsigned int length:16;
+ unsigned int pad[15];
+} __attribute__((aligned(8))) ;
+
+/* no BLTBs in pa2.0 processors */
+struct pdc_btlb_info_range {
+ unsigned char res00;
+ unsigned char num_i;
+ unsigned char num_d;
+ unsigned char num_comb;
+};
+
+struct pdc_btlb_info { /* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
+ unsigned int min_size; /* minimum size of BTLB in pages */
+ unsigned int max_size; /* maximum size of BTLB in pages */
+ struct pdc_btlb_info_range fixed_range_info;
+ struct pdc_btlb_info_range variable_range_info;
+};
+
+struct pdc_mem_retinfo { /* PDC_MEM/PDC_MEM_MEMINFO (return info) */
+ unsigned long pdt_size;
+ unsigned long pdt_entries;
+ unsigned long pdt_status;
+ unsigned long first_dbe_loc;
+ unsigned long good_mem;
+};
+
+struct pdc_mem_read_pdt { /* PDC_MEM/PDC_MEM_READ_PDT (return info) */
+ unsigned long pdt_entries;
+};
+
+#ifdef __LP64__
+struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
+ unsigned long entries_returned;
+ unsigned long entries_total;
+};
+
+struct pdc_memory_table { /* PDC_MEM/PDC_MEM_TABLE (arguments) */
+ unsigned long paddr;
+ unsigned int pages;
+ unsigned int reserved;
+};
+#endif /* __LP64__ */
+
+struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
+ unsigned long mod_addr;
+ unsigned long mod_pgs;
+ unsigned long add_addrs;
+};
+
+struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
+ unsigned long mod_addr;
+ unsigned long mod_pgs;
+};
+
+struct pdc_initiator { /* PDC_INITIATOR */
+ int host_id;
+ int factor;
+ int width;
+ int mode;
+};
+
+struct hardware_path {
+ char flags; /* see bit definitions below */
+ char bc[6]; /* Bus Converter routing info to a specific */
+ /* I/O adaptor (< 0 means none, > 63 resvd) */
+ char mod; /* fixed field of specified module */
+};
+
+/*
+ * Device path specifications used by PDC.
+ */
+struct pdc_module_path {
+ struct hardware_path path;
+ unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
+};
+
+/* Only used on some pre-PA2.0 boxes */
+struct pdc_memory_map { /* PDC_MEMORY_MAP */
+ unsigned long hpa; /* mod's register set address */
+ unsigned long more_pgs; /* number of additional I/O pgs */
+};
+
+struct pdc_tod {
+ unsigned long tod_sec;
+ unsigned long tod_usec;
+};
+
+/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
+
+struct pdc_hpmc_pim_11 { /* PDC_PIM */
+ unsigned int gr[32];
+ unsigned int cr[32];
+ unsigned int sr[8];
+ unsigned int iasq_back;
+ unsigned int iaoq_back;
+ unsigned int check_type;
+ unsigned int cpu_state;
+ unsigned int rsvd1;
+ unsigned int cache_check;
+ unsigned int tlb_check;
+ unsigned int bus_check;
+ unsigned int assists_check;
+ unsigned int rsvd2;
+ unsigned int assist_state;
+ unsigned int responder_addr;
+ unsigned int requestor_addr;
+ unsigned int path_info;
+ unsigned long long fr[32];
+};
+
+/*
+ * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
+ *
+ * Note that PDC_PIM doesn't care whether or not wide mode was enabled
+ * so the results are different on PA1.1 vs. PA2.0 when in narrow mode.
+ *
+ * Note also that there are unarchitected results available, which
+ * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
+ * the firmware is probably the best way of printing hversion dependent
+ * data.
+ */
+
+struct pdc_hpmc_pim_20 { /* PDC_PIM */
+ unsigned long long gr[32];
+ unsigned long long cr[32];
+ unsigned long long sr[8];
+ unsigned long long iasq_back;
+ unsigned long long iaoq_back;
+ unsigned int check_type;
+ unsigned int cpu_state;
+ unsigned int cache_check;
+ unsigned int tlb_check;
+ unsigned int bus_check;
+ unsigned int assists_check;
+ unsigned int assist_state;
+ unsigned int path_info;
+ unsigned long long responder_addr;
+ unsigned long long requestor_addr;
+ unsigned long long fr[32];
+};
+
+#endif /* !defined(__ASSEMBLY__) */
+
+#endif /* _UAPI_PARISC_PDC_H */