diff --git a/marvell/linux/arch/powerpc/boot/cuboot-pq2.c b/marvell/linux/arch/powerpc/boot/cuboot-pq2.c
new file mode 100644
index 0000000..d32765c
--- /dev/null
+++ b/marvell/linux/arch/powerpc/boot/cuboot-pq2.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Old U-boot compatibility for PowerQUICC II
+ * (a.k.a. 82xx with CPM, not the 8240 family of chips)
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+#include "io.h"
+#include "fsl-soc.h"
+
+#define TARGET_CPM2
+#define TARGET_HAS_ETH1
+#include "ppcboot.h"
+
+static bd_t bd;
+
+struct cs_range {
+	u32 csnum;
+	u32 base; /* must be zero */
+	u32 addr;
+	u32 size;
+};
+
+struct pci_range {
+	u32 flags;
+	u32 pci_addr[2];
+	u32 phys_addr;
+	u32 size[2];
+};
+
+struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)];
+struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)];
+
+/* Different versions of u-boot put the BCSR in different places, and
+ * some don't set up the PCI PIC at all, so we assume the device tree is
+ * sane and update the BRx registers appropriately.
+ *
+ * For any node defined as compatible with fsl,pq2-localbus,
+ * #address/#size must be 2/1 for the localbus, and 1/1 for the parent bus.
+ * Ranges must be for whole chip selects.
+ */
+static void update_cs_ranges(void)
+{
+	void *bus_node, *parent_node;
+	u32 *ctrl_addr;
+	unsigned long ctrl_size;
+	u32 naddr, nsize;
+	int len;
+	int i;
+
+	bus_node = finddevice("/localbus");
+	if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-localbus"))
+		return;
+
+	dt_get_reg_format(bus_node, &naddr, &nsize);
+	if (naddr != 2 || nsize != 1)
+		goto err;
+
+	parent_node = get_parent(bus_node);
+	if (!parent_node)
+		goto err;
+
+	dt_get_reg_format(parent_node, &naddr, &nsize);
+	if (naddr != 1 || nsize != 1)
+		goto err;
+
+	if (!dt_xlate_reg(bus_node, 0, (unsigned long *)&ctrl_addr,
+	                  &ctrl_size))
+		goto err;
+
+	len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf));
+
+	for (i = 0; i < len / sizeof(struct cs_range); i++) {
+		u32 base, option;
+		int cs = cs_ranges_buf[i].csnum;
+		if (cs >= ctrl_size / 8)
+			goto err;
+
+		if (cs_ranges_buf[i].base != 0)
+			goto err;
+
+		base = in_be32(&ctrl_addr[cs * 2]);
+
+		/* If CS is already valid, use the existing flags.
+		 * Otherwise, guess a sane default.
+		 */
+		if (base & 1) {
+			base &= 0x7fff;
+			option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff;
+		} else {
+			base = 0x1801;
+			option = 0x10;
+		}
+
+		out_be32(&ctrl_addr[cs * 2], 0);
+		out_be32(&ctrl_addr[cs * 2 + 1],
+		         option | ~(cs_ranges_buf[i].size - 1));
+		out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr);
+	}
+
+	return;
+
+err:
+	printf("Bad /localbus node\r\n");
+}
+
+/* Older u-boots don't set PCI up properly.  Update the hardware to match
+ * the device tree.  The prefetch mem region and non-prefetch mem region
+ * must be contiguous in the host bus.  As required by the PCI binding,
+ * PCI #addr/#size must be 3/2.  The parent bus must be 1/1.  Only
+ * 32-bit PCI is supported.  All three region types (prefetchable mem,
+ * non-prefetchable mem, and I/O) must be present.
+ */
+static void fixup_pci(void)
+{
+	struct pci_range *mem = NULL, *mmio = NULL,
+	                 *io = NULL, *mem_base = NULL;
+	u32 *pci_regs[3];
+	u8 *soc_regs;
+	int i, len;
+	void *node, *parent_node;
+	u32 naddr, nsize, mem_pow2, mem_mask;
+
+	node = finddevice("/pci");
+	if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
+		return;
+
+	for (i = 0; i < 3; i++)
+		if (!dt_xlate_reg(node, i,
+		                  (unsigned long *)&pci_regs[i], NULL))
+			goto err;
+
+	soc_regs = (u8 *)fsl_get_immr();
+	if (!soc_regs)
+		goto unhandled;
+
+	dt_get_reg_format(node, &naddr, &nsize);
+	if (naddr != 3 || nsize != 2)
+		goto err;
+
+	parent_node = get_parent(node);
+	if (!parent_node)
+		goto err;
+
+	dt_get_reg_format(parent_node, &naddr, &nsize);
+	if (naddr != 1 || nsize != 1)
+		goto unhandled;
+
+	len = getprop(node, "ranges", pci_ranges_buf,
+	              sizeof(pci_ranges_buf));
+
+	for (i = 0; i < len / sizeof(struct pci_range); i++) {
+		u32 flags = pci_ranges_buf[i].flags & 0x43000000;
+
+		if (flags == 0x42000000)
+			mem = &pci_ranges_buf[i];
+		else if (flags == 0x02000000)
+			mmio = &pci_ranges_buf[i];
+		else if (flags == 0x01000000)
+			io = &pci_ranges_buf[i];
+	}
+
+	if (!mem || !mmio || !io)
+		goto unhandled;
+	if (mem->size[1] != mmio->size[1])
+		goto unhandled;
+	if (mem->size[1] & (mem->size[1] - 1))
+		goto unhandled;
+	if (io->size[1] & (io->size[1] - 1))
+		goto unhandled;
+
+	if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
+		mem_base = mem;
+	else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
+		mem_base = mmio;
+	else
+		goto unhandled;
+
+	out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
+	out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
+
+	out_be32(&pci_regs[1][1], io->phys_addr | 1);
+	out_be32(&pci_regs[2][1], ~(io->size[1] - 1));
+
+	out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12);
+	out_le32(&pci_regs[0][2], mem->phys_addr >> 12);
+	out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000);
+
+	out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12);
+	out_le32(&pci_regs[0][8], mmio->phys_addr >> 12);
+	out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000);
+
+	out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12);
+	out_le32(&pci_regs[0][14], io->phys_addr >> 12);
+	out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000);
+
+	/* Inbound translation */
+	out_le32(&pci_regs[0][58], 0);
+	out_le32(&pci_regs[0][60], 0);
+
+	mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
+	mem_mask = ~(mem_pow2 - 1) >> 12;
+	out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask);
+
+	/* If PCI is disabled, drive RST high to enable. */
+	if (!(in_le32(&pci_regs[0][32]) & 1)) {
+		 /* Tpvrh (Power valid to RST# high) 100 ms */
+		udelay(100000);
+
+		out_le32(&pci_regs[0][32], 1);
+
+		/* Trhfa (RST# high to first cfg access) 2^25 clocks */
+		udelay(1020000);
+	}
+
+	/* Enable bus master and memory access */
+	out_le32(&pci_regs[0][64], 0x80000004);
+	out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6);
+
+	/* Park the bus on PCI, and elevate PCI's arbitration priority,
+	 * as required by section 9.6 of the user's manual.
+	 */
+	out_8(&soc_regs[0x10028], 3);
+	out_be32((u32 *)&soc_regs[0x1002c], 0x01236745);
+
+	return;
+
+err:
+	printf("Bad PCI node -- using existing firmware setup.\r\n");
+	return;
+
+unhandled:
+	printf("Unsupported PCI node -- using existing firmware setup.\r\n");
+}
+
+static void pq2_platform_fixups(void)
+{
+	void *node;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
+
+	node = finddevice("/soc/cpm");
+	if (node)
+		setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node)
+		setprop(node, "clock-frequency",  &bd.bi_brgfreq, 4);
+
+	update_cs_ranges();
+	fixup_pci();
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = pq2_platform_fixups;
+}