ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/powerpc/boot/dts/fsl/p5040ds.dts b/marvell/linux/arch/powerpc/boot/dts/fsl/p5040ds.dts
new file mode 100644
index 0000000..30850b3
--- /dev/null
+++ b/marvell/linux/arch/powerpc/boot/dts/fsl/p5040ds.dts
@@ -0,0 +1,486 @@
+/*
+ * P5040DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/include/ "p5040si-pre.dtsi"
+
+/ {
+ model = "fsl,P5040DS";
+ compatible = "fsl,P5040DS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases{
+ phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c;
+ phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d;
+ phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e;
+ phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f;
+ phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c;
+ phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d;
+ phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e;
+ phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f;
+ phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c;
+ phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d;
+ phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e;
+ phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f;
+ phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c;
+ phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d;
+ phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e;
+ phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f;
+ hydra_rg = &hydra_rg;
+ hydra_sg_slot2 = &hydra_sg_slot2;
+ hydra_sg_slot3 = &hydra_sg_slot3;
+ hydra_sg_slot5 = &hydra_sg_slot5;
+ hydra_sg_slot6 = &hydra_sg_slot6;
+ hydra_xg_slot1 = &hydra_xg_slot1;
+ hydra_xg_slot2 = &hydra_xg_slot2;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ };
+ qman_fqd: qman-fqd {
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ bportals: bman-portals@ff4000000 {
+ ranges = <0x0 0xf 0xf4000000 0x200000>;
+ };
+
+ qportals: qman-portals@ff4200000 {
+ ranges = <0x0 0xf 0xf4200000 0x200000>;
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ i2c@118100 {
+ eeprom@51 {
+ compatible = "atmel,24c256";
+ reg = <0x51>;
+ };
+ eeprom@52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+ };
+
+ i2c@119100 {
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
+ };
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ ina220@44 {
+ compatible = "ti,ina220";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+ ina220@45 {
+ compatible = "ti,ina220";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+ adt7461@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+
+ fman@400000 {
+ ethernet@e0000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_0>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_slot_2>;
+ phy-connection-type = "xgmii";
+ };
+ };
+
+ fman@500000 {
+ ethernet@e0000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e6000 {
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&phy_rgmii_1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@f0000 {
+ phy-handle = <&phy_xgmii_slot_1>;
+ phy-connection-type = "xgmii";
+ };
+ };
+ };
+
+ lbc: localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xffa00000 0x00040000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ partition@0 {
+ label = "NAND U-Boot Image";
+ reg = <0x0 0x02000000>;
+ };
+
+ partition@2000000 {
+ label = "NAND Root File System";
+ reg = <0x02000000 0x10000000>;
+ };
+
+ partition@12000000 {
+ label = "NAND Compressed RFS Image";
+ reg = <0x12000000 0x08000000>;
+ };
+
+ partition@1a000000 {
+ label = "NAND Linux Kernel Image";
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ partition@1e000000 {
+ label = "NAND DTB Image";
+ reg = <0x1e000000 0x01000000>;
+ };
+
+ partition@1f000000 {
+ label = "NAND Writable User area";
+ reg = <0x1f000000 0x01000000>;
+ };
+ };
+
+ board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x40>;
+ ranges = <0 3 0 0x40>;
+
+ mdio-mux-emi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ reg = <9 1>;
+ mux-mask = <0x78>;
+
+ hydra_rg:rgmii-mdio@8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <8>;
+ status = "disabled";
+
+ phy_rgmii_0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy_rgmii_1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ hydra_sg_slot2: sgmii-mdio@28 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x28>;
+ status = "disabled";
+
+ phy_sgmii_slot2_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot2_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot2_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot2_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ hydra_sg_slot3: sgmii-mdio@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x68>;
+ status = "disabled";
+
+ phy_sgmii_slot3_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot3_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot3_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot3_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ hydra_sg_slot5: sgmii-mdio@38 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+ status = "disabled";
+
+ phy_sgmii_slot5_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot5_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot5_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot5_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ hydra_sg_slot6: sgmii-mdio@48 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48>;
+ status = "disabled";
+
+ phy_sgmii_slot6_1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ phy_sgmii_slot6_1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ phy_sgmii_slot6_1e: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ phy_sgmii_slot6_1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ mdio-mux-emi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&xmdio0>;
+ reg = <9 1>;
+ mux-mask = <0x06>;
+
+ hydra_xg_slot1: hydra-xg-slot1@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ phy_xgmii_slot_1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
+
+ hydra_xg_slot2: hydra-xg-slot2@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ phy_xgmii_slot_2: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ };
+ };
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ reg = <0xf 0xfe201000 0 0x1000>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe202000 {
+ reg = <0xf 0xfe202000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
+
+/include/ "p5040si-post.dtsi"