ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/powerpc/include/asm/ppc_asm.h b/marvell/linux/arch/powerpc/include/asm/ppc_asm.h
new file mode 100644
index 0000000..6b03dff
--- /dev/null
+++ b/marvell/linux/arch/powerpc/include/asm/ppc_asm.h
@@ -0,0 +1,837 @@
+/*
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ */
+#ifndef _ASM_POWERPC_PPC_ASM_H
+#define _ASM_POWERPC_PPC_ASM_H
+
+#include <linux/stringify.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+#include <asm/ppc-opcode.h>
+#include <asm/firmware.h>
+#include <asm/feature-fixups.h>
+
+#ifdef __ASSEMBLY__
+
+#define SZL (BITS_PER_LONG/8)
+
+/*
+ * Stuff for accurate CPU time accounting.
+ * These macros handle transitions between user and system state
+ * in exception entry and exit and accumulate time to the
+ * user_time and system_time fields in the paca.
+ */
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb)
+#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)
+#define ACCOUNT_STOLEN_TIME
+#else
+#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb) \
+ MFTB(ra); /* get timebase */ \
+ PPC_LL rb, ACCOUNT_STARTTIME_USER(ptr); \
+ PPC_STL ra, ACCOUNT_STARTTIME(ptr); \
+ subf rb,rb,ra; /* subtract start value */ \
+ PPC_LL ra, ACCOUNT_USER_TIME(ptr); \
+ add ra,ra,rb; /* add on to user time */ \
+ PPC_STL ra, ACCOUNT_USER_TIME(ptr); \
+
+#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) \
+ MFTB(ra); /* get timebase */ \
+ PPC_LL rb, ACCOUNT_STARTTIME(ptr); \
+ PPC_STL ra, ACCOUNT_STARTTIME_USER(ptr); \
+ subf rb,rb,ra; /* subtract start value */ \
+ PPC_LL ra, ACCOUNT_SYSTEM_TIME(ptr); \
+ add ra,ra,rb; /* add on to system time */ \
+ PPC_STL ra, ACCOUNT_SYSTEM_TIME(ptr)
+
+#ifdef CONFIG_PPC_SPLPAR
+#define ACCOUNT_STOLEN_TIME \
+BEGIN_FW_FTR_SECTION; \
+ beq 33f; \
+ /* from user - see if there are any DTL entries to process */ \
+ ld r10,PACALPPACAPTR(r13); /* get ptr to VPA */ \
+ ld r11,PACA_DTL_RIDX(r13); /* get log read index */ \
+ addi r10,r10,LPPACA_DTLIDX; \
+ LDX_BE r10,0,r10; /* get log write index */ \
+ cmpd cr1,r11,r10; \
+ beq+ cr1,33f; \
+ bl accumulate_stolen_time; \
+ ld r12,_MSR(r1); \
+ andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \
+33: \
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
+
+#else /* CONFIG_PPC_SPLPAR */
+#define ACCOUNT_STOLEN_TIME
+
+#endif /* CONFIG_PPC_SPLPAR */
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#ifdef __powerpc64__
+#define SAVE_GPR(n, base) std n,GPR0+8*(n)(base)
+#define REST_GPR(n, base) ld n,GPR0+8*(n)(base)
+#define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base)
+#else
+#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base)
+#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base)
+#define SAVE_NVGPRS(base) stmw 13, GPR0+4*13(base)
+#define REST_NVGPRS(base) lmw 13, GPR0+4*13(base)
+#endif
+
+#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_FPR(n, base) stfd n,8*TS_FPRWIDTH*(n)(base)
+#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base) lfd n,8*TS_FPRWIDTH*(n)(base)
+#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base) li b,16*(n); stvx n,base,b
+#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
+#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
+#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
+#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
+#define REST_VR(n,b,base) li b,16*(n); lvx n,base,b
+#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
+#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
+#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
+#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+
+#ifdef __BIG_ENDIAN__
+#define STXVD2X_ROT(n,b,base) STXVD2X(n,b,base)
+#define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base)
+#else
+#define STXVD2X_ROT(n,b,base) XXSWAPD(n,n); \
+ STXVD2X(n,b,base); \
+ XXSWAPD(n,n)
+
+#define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base); \
+ XXSWAPD(n,n)
+#endif
+/* Save the lower 32 VSRs in the thread VSR region */
+#define SAVE_VSR(n,b,base) li b,16*(n); STXVD2X_ROT(n,R##base,R##b)
+#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
+#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
+#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
+#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
+#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
+#define REST_VSR(n,b,base) li b,16*(n); LXVD2X_ROT(n,R##base,R##b)
+#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base)
+#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
+#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
+#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
+#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
+
+/*
+ * b = base register for addressing, o = base offset from register of 1st EVR
+ * n = first EVR, s = scratch
+ */
+#define SAVE_EVR(n,s,b,o) evmergehi s,s,n; stw s,o+4*(n)(b)
+#define SAVE_2EVRS(n,s,b,o) SAVE_EVR(n,s,b,o); SAVE_EVR(n+1,s,b,o)
+#define SAVE_4EVRS(n,s,b,o) SAVE_2EVRS(n,s,b,o); SAVE_2EVRS(n+2,s,b,o)
+#define SAVE_8EVRS(n,s,b,o) SAVE_4EVRS(n,s,b,o); SAVE_4EVRS(n+4,s,b,o)
+#define SAVE_16EVRS(n,s,b,o) SAVE_8EVRS(n,s,b,o); SAVE_8EVRS(n+8,s,b,o)
+#define SAVE_32EVRS(n,s,b,o) SAVE_16EVRS(n,s,b,o); SAVE_16EVRS(n+16,s,b,o)
+#define REST_EVR(n,s,b,o) lwz s,o+4*(n)(b); evmergelo n,s,n
+#define REST_2EVRS(n,s,b,o) REST_EVR(n,s,b,o); REST_EVR(n+1,s,b,o)
+#define REST_4EVRS(n,s,b,o) REST_2EVRS(n,s,b,o); REST_2EVRS(n+2,s,b,o)
+#define REST_8EVRS(n,s,b,o) REST_4EVRS(n,s,b,o); REST_4EVRS(n+4,s,b,o)
+#define REST_16EVRS(n,s,b,o) REST_8EVRS(n,s,b,o); REST_8EVRS(n+8,s,b,o)
+#define REST_32EVRS(n,s,b,o) REST_16EVRS(n,s,b,o); REST_16EVRS(n+16,s,b,o)
+
+/* Macros to adjust thread priority for hardware multithreading */
+#define HMT_VERY_LOW or 31,31,31 # very low priority
+#define HMT_LOW or 1,1,1
+#define HMT_MEDIUM_LOW or 6,6,6 # medium low priority
+#define HMT_MEDIUM or 2,2,2
+#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority
+#define HMT_HIGH or 3,3,3
+#define HMT_EXTRA_HIGH or 7,7,7 # power7 only
+
+#ifdef CONFIG_PPC64
+#define ULONG_SIZE 8
+#else
+#define ULONG_SIZE 4
+#endif
+#define __VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+#define VCPU_GPR(n) __VCPU_GPR(__REG_##n)
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#define STACKFRAMESIZE 256
+#define __STK_REG(i) (112 + ((i)-14)*8)
+#define STK_REG(i) __STK_REG(__REG_##i)
+
+#ifdef PPC64_ELF_ABI_v2
+#define STK_GOT 24
+#define __STK_PARAM(i) (32 + ((i)-3)*8)
+#else
+#define STK_GOT 40
+#define __STK_PARAM(i) (48 + ((i)-3)*8)
+#endif
+#define STK_PARAM(i) __STK_PARAM(__REG_##i)
+
+#ifdef PPC64_ELF_ABI_v2
+
+#define _GLOBAL(name) \
+ .align 2 ; \
+ .type name,@function; \
+ .globl name; \
+name:
+
+#define _GLOBAL_TOC(name) \
+ .align 2 ; \
+ .type name,@function; \
+ .globl name; \
+name: \
+0: addis r2,r12,(.TOC.-0b)@ha; \
+ addi r2,r2,(.TOC.-0b)@l; \
+ .localentry name,.-name
+
+#define DOTSYM(a) a
+
+#else
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
+
+#define _GLOBAL(name) \
+ .align 2 ; \
+ .globl name; \
+ .globl GLUE(.,name); \
+ .pushsection ".opd","aw"; \
+name: \
+ .quad GLUE(.,name); \
+ .quad .TOC.@tocbase; \
+ .quad 0; \
+ .popsection; \
+ .type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _GLOBAL_TOC(name) _GLOBAL(name)
+
+#define DOTSYM(a) GLUE(.,a)
+
+#endif
+
+#else /* 32-bit */
+
+#define _ENTRY(n) \
+ .globl n; \
+n:
+
+#define _GLOBAL(n) \
+ .stabs __stringify(n:F-1),N_FUN,0,0,n;\
+ .globl n; \
+n:
+
+#define _GLOBAL_TOC(name) _GLOBAL(name)
+
+#endif
+
+/*
+ * __kprobes (the C annotation) puts the symbol into the .kprobes.text
+ * section, which gets emitted at the end of regular text.
+ *
+ * _ASM_NOKPROBE_SYMBOL and NOKPROBE_SYMBOL just adds the symbol to
+ * a blacklist. The former is for core kprobe functions/data, the
+ * latter is for those that incdentially must be excluded from probing
+ * and allows them to be linked at more optimal location within text.
+ */
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE_SYMBOL(entry) \
+ .pushsection "_kprobe_blacklist","aw"; \
+ PPC_LONG (entry) ; \
+ .popsection
+#else
+#define _ASM_NOKPROBE_SYMBOL(entry)
+#endif
+
+#define FUNC_START(name) _GLOBAL(name)
+#define FUNC_END(name)
+
+/*
+ * LOAD_REG_IMMEDIATE(rn, expr)
+ * Loads the value of the constant expression 'expr' into register 'rn'
+ * using immediate instructions only. Use this when it's important not
+ * to reference other data (i.e. on ppc64 when the TOC pointer is not
+ * valid) and when 'expr' is a constant or absolute address.
+ *
+ * LOAD_REG_ADDR(rn, name)
+ * Loads the address of label 'name' into register 'rn'. Use this when
+ * you don't particularly need immediate instructions only, but you need
+ * the whole address in one register (e.g. it's a structure address and
+ * you want to access various offsets within it). On ppc32 this is
+ * identical to LOAD_REG_IMMEDIATE.
+ *
+ * LOAD_REG_ADDR_PIC(rn, name)
+ * Loads the address of label 'name' into register 'run'. Use this when
+ * the kernel doesn't run at the linked or relocated address. Please
+ * note that this macro will clobber the lr register.
+ *
+ * LOAD_REG_ADDRBASE(rn, name)
+ * ADDROFF(name)
+ * LOAD_REG_ADDRBASE loads part of the address of label 'name' into
+ * register 'rn'. ADDROFF(name) returns the remainder of the address as
+ * a constant expression. ADDROFF(name) is a signed expression < 16 bits
+ * in size, so is suitable for use directly as an offset in load and store
+ * instructions. Use this when loading/storing a single word or less as:
+ * LOAD_REG_ADDRBASE(rX, name)
+ * ld rY,ADDROFF(name)(rX)
+ */
+
+/* Be careful, this will clobber the lr register. */
+#define LOAD_REG_ADDR_PIC(reg, name) \
+ bl 0f; \
+0: mflr reg; \
+ addis reg,reg,(name - 0b)@ha; \
+ addi reg,reg,(name - 0b)@l;
+
+#if defined(__powerpc64__) && defined(HAVE_AS_ATHIGH)
+#define __AS_ATHIGH high
+#else
+#define __AS_ATHIGH h
+#endif
+
+.macro __LOAD_REG_IMMEDIATE_32 r, x
+ .if (\x) >= 0x8000 || (\x) < -0x8000
+ lis \r, (\x)@__AS_ATHIGH
+ .if (\x) & 0xffff != 0
+ ori \r, \r, (\x)@l
+ .endif
+ .else
+ li \r, (\x)@l
+ .endif
+.endm
+
+.macro __LOAD_REG_IMMEDIATE r, x
+ .if (\x) >= 0x80000000 || (\x) < -0x80000000
+ __LOAD_REG_IMMEDIATE_32 \r, (\x) >> 32
+ sldi \r, \r, 32
+ .if (\x) & 0xffff0000 != 0
+ oris \r, \r, (\x)@__AS_ATHIGH
+ .endif
+ .if (\x) & 0xffff != 0
+ ori \r, \r, (\x)@l
+ .endif
+ .else
+ __LOAD_REG_IMMEDIATE_32 \r, \x
+ .endif
+.endm
+
+#ifdef __powerpc64__
+
+#define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE reg, expr
+
+#define LOAD_REG_IMMEDIATE_SYM(reg, tmp, expr) \
+ lis tmp, (expr)@highest; \
+ lis reg, (expr)@__AS_ATHIGH; \
+ ori tmp, tmp, (expr)@higher; \
+ ori reg, reg, (expr)@l; \
+ rldimi reg, tmp, 32, 0
+
+#define LOAD_REG_ADDR(reg,name) \
+ ld reg,name@got(r2)
+
+#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name)
+#define ADDROFF(name) 0
+
+/* offsets for stack frame layout */
+#define LRSAVE 16
+
+#else /* 32-bit */
+
+#define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE_32 reg, expr
+
+#define LOAD_REG_IMMEDIATE_SYM(reg,expr) \
+ lis reg,(expr)@ha; \
+ addi reg,reg,(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE_SYM(reg, name)
+
+#define LOAD_REG_ADDRBASE(reg, name) lis reg,name@ha
+#define ADDROFF(name) name@l
+
+/* offsets for stack frame layout */
+#define LRSAVE 4
+
+#endif
+
+/* various errata or part fixups */
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC sync; isync
+#define SYNC_601 sync
+#define ISYNC_601 isync
+#else
+#define SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
+#define MFTB(dest) \
+90: mfspr dest, SPRN_TBRL; \
+BEGIN_FTR_SECTION_NESTED(96); \
+ cmpwi dest,0; \
+ beq- 90b; \
+END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#else
+#define MFTB(dest) MFTBL(dest)
+#endif
+
+#ifdef CONFIG_PPC_8xx
+#define MFTBL(dest) mftb dest
+#define MFTBU(dest) mftbu dest
+#else
+#define MFTBL(dest) mfspr dest, SPRN_TBRL
+#define MFTBU(dest) mfspr dest, SPRN_TBRU
+#endif
+
+/* tlbsync is not implemented on 601 */
+#if !defined(CONFIG_SMP) || defined(CONFIG_PPC_BOOK3S_601)
+#define TLBSYNC
+#else
+#define TLBSYNC tlbsync; sync
+#endif
+
+#ifdef CONFIG_PPC64
+#define MTOCRF(FXM, RS) \
+ BEGIN_FTR_SECTION_NESTED(848); \
+ mtcrf (FXM), RS; \
+ FTR_SECTION_ELSE_NESTED(848); \
+ mtocrf (FXM), RS; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
+#endif
+
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_PPC_8xx)
+#define tlbia \
+ li r4,1024; \
+ mtctr r4; \
+ lis r4,KERNELBASE@h; \
+ .machine push; \
+ .machine "power4"; \
+0: tlbie r4; \
+ .machine pop; \
+ addi r4,r4,0x1000; \
+ bdnz 0b
+#endif
+
+
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
+/* The following stops all load and store data streams associated with stream
+ * ID (ie. streams created explicitly). The embedded and server mnemonics for
+ * dcbt are different so this must only be used for server.
+ */
+#define DCBT_BOOK3S_STOP_ALL_STREAM_IDS(scratch) \
+ lis scratch,0x60000000@h; \
+ dcbt 0,scratch,0b01010
+
+/*
+ * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
+ * keep the address intact to be compatible with code shared with
+ * 32-bit classic.
+ *
+ * On the other hand, I find it useful to have them behave as expected
+ * by their name (ie always do the addition) on 64-bit BookE
+ */
+#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64)
+#define toreal(rd)
+#define fromreal(rd)
+
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
+#define tophys(rd,rs) \
+ addis rd,rs,0
+
+#define tovirt(rd,rs) \
+ addis rd,rs,0
+
+#elif defined(CONFIG_PPC64)
+#define toreal(rd) /* we can access c000... in real mode */
+#define fromreal(rd)
+
+#define tophys(rd,rs) \
+ clrldi rd,rs,2
+
+#define tovirt(rd,rs) \
+ rotldi rd,rs,16; \
+ ori rd,rd,((KERNELBASE>>48)&0xFFFF);\
+ rotldi rd,rd,48
+#else
+#define toreal(rd) tophys(rd,rd)
+#define fromreal(rd) tovirt(rd,rd)
+
+#define tophys(rd, rs) addis rd, rs, -PAGE_OFFSET@h
+#define tovirt(rd, rs) addis rd, rs, PAGE_OFFSET@h
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#define RFI rfid
+#define MTMSRD(r) mtmsrd r
+#define MTMSR_EERI(reg) mtmsrd reg,1
+#else
+#ifndef CONFIG_40x
+#define RFI rfi
+#else
+#define RFI rfi; b . /* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r) mtmsr r
+#define MTMSR_EERI(reg) mtmsr reg
+#endif
+
+#endif /* __KERNEL__ */
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define cr0 0
+#define cr1 1
+#define cr2 2
+#define cr3 3
+#define cr4 4
+#define cr5 5
+#define cr6 6
+#define cr7 7
+
+
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */
+
+#define r0 %r0
+#define r1 %r1
+#define r2 %r2
+#define r3 %r3
+#define r4 %r4
+#define r5 %r5
+#define r6 %r6
+#define r7 %r7
+#define r8 %r8
+#define r9 %r9
+#define r10 %r10
+#define r11 %r11
+#define r12 %r12
+#define r13 %r13
+#define r14 %r14
+#define r15 %r15
+#define r16 %r16
+#define r17 %r17
+#define r18 %r18
+#define r19 %r19
+#define r20 %r20
+#define r21 %r21
+#define r22 %r22
+#define r23 %r23
+#define r24 %r24
+#define r25 %r25
+#define r26 %r26
+#define r27 %r27
+#define r28 %r28
+#define r29 %r29
+#define r30 %r30
+#define r31 %r31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define fr0 0
+#define fr1 1
+#define fr2 2
+#define fr3 3
+#define fr4 4
+#define fr5 5
+#define fr6 6
+#define fr7 7
+#define fr8 8
+#define fr9 9
+#define fr10 10
+#define fr11 11
+#define fr12 12
+#define fr13 13
+#define fr14 14
+#define fr15 15
+#define fr16 16
+#define fr17 17
+#define fr18 18
+#define fr19 19
+#define fr20 20
+#define fr21 21
+#define fr22 22
+#define fr23 23
+#define fr24 24
+#define fr25 25
+#define fr26 26
+#define fr27 27
+#define fr28 28
+#define fr29 29
+#define fr30 30
+#define fr31 31
+
+/* AltiVec Registers (VPRs) */
+
+#define v0 0
+#define v1 1
+#define v2 2
+#define v3 3
+#define v4 4
+#define v5 5
+#define v6 6
+#define v7 7
+#define v8 8
+#define v9 9
+#define v10 10
+#define v11 11
+#define v12 12
+#define v13 13
+#define v14 14
+#define v15 15
+#define v16 16
+#define v17 17
+#define v18 18
+#define v19 19
+#define v20 20
+#define v21 21
+#define v22 22
+#define v23 23
+#define v24 24
+#define v25 25
+#define v26 26
+#define v27 27
+#define v28 28
+#define v29 29
+#define v30 30
+#define v31 31
+
+/* VSX Registers (VSRs) */
+
+#define vs0 0
+#define vs1 1
+#define vs2 2
+#define vs3 3
+#define vs4 4
+#define vs5 5
+#define vs6 6
+#define vs7 7
+#define vs8 8
+#define vs9 9
+#define vs10 10
+#define vs11 11
+#define vs12 12
+#define vs13 13
+#define vs14 14
+#define vs15 15
+#define vs16 16
+#define vs17 17
+#define vs18 18
+#define vs19 19
+#define vs20 20
+#define vs21 21
+#define vs22 22
+#define vs23 23
+#define vs24 24
+#define vs25 25
+#define vs26 26
+#define vs27 27
+#define vs28 28
+#define vs29 29
+#define vs30 30
+#define vs31 31
+#define vs32 32
+#define vs33 33
+#define vs34 34
+#define vs35 35
+#define vs36 36
+#define vs37 37
+#define vs38 38
+#define vs39 39
+#define vs40 40
+#define vs41 41
+#define vs42 42
+#define vs43 43
+#define vs44 44
+#define vs45 45
+#define vs46 46
+#define vs47 47
+#define vs48 48
+#define vs49 49
+#define vs50 50
+#define vs51 51
+#define vs52 52
+#define vs53 53
+#define vs54 54
+#define vs55 55
+#define vs56 56
+#define vs57 57
+#define vs58 58
+#define vs59 59
+#define vs60 60
+#define vs61 61
+#define vs62 62
+#define vs63 63
+
+/* SPE Registers (EVPRs) */
+
+#define evr0 0
+#define evr1 1
+#define evr2 2
+#define evr3 3
+#define evr4 4
+#define evr5 5
+#define evr6 6
+#define evr7 7
+#define evr8 8
+#define evr9 9
+#define evr10 10
+#define evr11 11
+#define evr12 12
+#define evr13 13
+#define evr14 14
+#define evr15 15
+#define evr16 16
+#define evr17 17
+#define evr18 18
+#define evr19 19
+#define evr20 20
+#define evr21 21
+#define evr22 22
+#define evr23 23
+#define evr24 24
+#define evr25 25
+#define evr26 26
+#define evr27 27
+#define evr28 28
+#define evr29 29
+#define evr30 30
+#define evr31 31
+
+/* some stab codes */
+#define N_FUN 36
+#define N_RSYM 64
+#define N_SLINE 68
+#define N_SO 100
+
+/*
+ * Create an endian fixup trampoline
+ *
+ * This starts with a "tdi 0,0,0x48" instruction which is
+ * essentially a "trap never", and thus akin to a nop.
+ *
+ * The opcode for this instruction read with the wrong endian
+ * however results in a b . + 8
+ *
+ * So essentially we use that trick to execute the following
+ * trampoline in "reverse endian" if we are running with the
+ * MSR_LE bit set the "wrong" way for whatever endianness the
+ * kernel is built for.
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+#define FIXUP_ENDIAN
+#else
+/*
+ * This version may be used in in HV or non-HV context.
+ * MSR[EE] must be disabled.
+ */
+#define FIXUP_ENDIAN \
+ tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \
+ b 191f; /* Skip trampoline if endian is good */ \
+ .long 0xa600607d; /* mfmsr r11 */ \
+ .long 0x01006b69; /* xori r11,r11,1 */ \
+ .long 0x00004039; /* li r10,0 */ \
+ .long 0x6401417d; /* mtmsrd r10,1 */ \
+ .long 0x05009f42; /* bcl 20,31,$+4 */ \
+ .long 0xa602487d; /* mflr r10 */ \
+ .long 0x14004a39; /* addi r10,r10,20 */ \
+ .long 0xa6035a7d; /* mtsrr0 r10 */ \
+ .long 0xa6037b7d; /* mtsrr1 r11 */ \
+ .long 0x2400004c; /* rfid */ \
+191:
+
+/*
+ * This version that may only be used with MSR[HV]=1
+ * - Does not clear MSR[RI], so more robust.
+ * - Slightly smaller and faster.
+ */
+#define FIXUP_ENDIAN_HV \
+ tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \
+ b 191f; /* Skip trampoline if endian is good */ \
+ .long 0xa600607d; /* mfmsr r11 */ \
+ .long 0x01006b69; /* xori r11,r11,1 */ \
+ .long 0x05009f42; /* bcl 20,31,$+4 */ \
+ .long 0xa602487d; /* mflr r10 */ \
+ .long 0x14004a39; /* addi r10,r10,20 */ \
+ .long 0xa64b5a7d; /* mthsrr0 r10 */ \
+ .long 0xa64b7b7d; /* mthsrr1 r11 */ \
+ .long 0x2402004c; /* hrfid */ \
+191:
+
+#endif /* !CONFIG_PPC_BOOK3E */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Helper macro for exception table entries
+ */
+#define EX_TABLE(_fault, _target) \
+ stringify_in_c(.section __ex_table,"a";)\
+ stringify_in_c(.balign 4;) \
+ stringify_in_c(.long (_fault) - . ;) \
+ stringify_in_c(.long (_target) - . ;) \
+ stringify_in_c(.previous)
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#define BTB_FLUSH(reg) \
+ lis reg,BUCSR_INIT@h; \
+ ori reg,reg,BUCSR_INIT@l; \
+ mtspr SPRN_BUCSR,reg; \
+ isync;
+#else
+#define BTB_FLUSH(reg)
+#endif /* CONFIG_PPC_FSL_BOOK3E */
+
+#endif /* _ASM_POWERPC_PPC_ASM_H */