ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/powerpc/include/asm/reg.h b/marvell/linux/arch/powerpc/include/asm/reg.h
new file mode 100644
index 0000000..34d08ff
--- /dev/null
+++ b/marvell/linux/arch/powerpc/include/asm/reg.h
@@ -0,0 +1,1463 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifndef _ASM_POWERPC_REG_H
+#define _ASM_POWERPC_REG_H
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/cputable.h>
+#include <asm/asm-const.h>
+#include <asm/feature-fixups.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif /* CONFIG_BOOKE || CONFIG_40x */
+
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
+#ifdef CONFIG_PPC_8xx
+#include <asm/reg_8xx.h>
+#endif /* CONFIG_PPC_8xx */
+
+#define MSR_SF_LG 63 /* Enable 64 bit mode */
+#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
+#define MSR_HV_LG 60 /* Hypervisor state */
+#define MSR_TS_T_LG 34 /* Trans Mem state: Transactional */
+#define MSR_TS_S_LG 33 /* Trans Mem state: Suspended */
+#define MSR_TS_LG 33 /* Trans Mem state (2 bits) */
+#define MSR_TM_LG 32 /* Trans Mem Available */
+#define MSR_VEC_LG 25 /* Enable AltiVec */
+#define MSR_VSX_LG 23 /* Enable VSX */
+#define MSR_S_LG 22 /* Secure state */
+#define MSR_POW_LG 18 /* Enable Power Management */
+#define MSR_WE_LG 18 /* Wait State Enable */
+#define MSR_TGPR_LG 17 /* TLB Update registers in use */
+#define MSR_CE_LG 17 /* Critical Interrupt Enable */
+#define MSR_ILE_LG 16 /* Interrupt Little Endian */
+#define MSR_EE_LG 15 /* External Interrupt Enable */
+#define MSR_PR_LG 14 /* Problem State / Privilege Level */
+#define MSR_FP_LG 13 /* Floating Point enable */
+#define MSR_ME_LG 12 /* Machine Check Enable */
+#define MSR_FE0_LG 11 /* Floating Exception mode 0 */
+#define MSR_SE_LG 10 /* Single Step */
+#define MSR_BE_LG 9 /* Branch Trace */
+#define MSR_DE_LG 9 /* Debug Exception Enable */
+#define MSR_FE1_LG 8 /* Floating Exception mode 1 */
+#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */
+#define MSR_IR_LG 5 /* Instruction Relocate */
+#define MSR_DR_LG 4 /* Data Relocate */
+#define MSR_PE_LG 3 /* Protection Enable */
+#define MSR_PX_LG 2 /* Protection Exclusive Mode */
+#define MSR_PMM_LG 2 /* Performance monitor */
+#define MSR_RI_LG 1 /* Recoverable Exception */
+#define MSR_LE_LG 0 /* Little Endian */
+
+#ifdef __ASSEMBLY__
+#define __MASK(X) (1<<(X))
+#else
+#define __MASK(X) (1UL<<(X))
+#endif
+
+#ifdef CONFIG_PPC64
+#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */
+#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */
+#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */
+#define MSR_S __MASK(MSR_S_LG) /* Secure state */
+#else
+/* so tests for these bits fail on 32-bit */
+#define MSR_SF 0
+#define MSR_ISF 0
+#define MSR_HV 0
+#define MSR_S 0
+#endif
+
+/*
+ * To be used in shared book E/book S, this avoids needing to worry about
+ * book S/book E in shared code
+ */
+#ifndef MSR_SPE
+#define MSR_SPE 0
+#endif
+
+#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */
+#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */
+#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */
+#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */
+#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */
+#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */
+#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */
+#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */
+#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */
+#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */
+#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */
+#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */
+#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */
+#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */
+#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */
+#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */
+#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */
+#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */
+#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */
+#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */
+#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */
+#ifndef MSR_PMM
+#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */
+#endif
+#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */
+#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */
+
+#define MSR_TM __MASK(MSR_TM_LG) /* Transactional Mem Available */
+#define MSR_TS_N 0 /* Non-transactional */
+#define MSR_TS_S __MASK(MSR_TS_S_LG) /* Transaction Suspended */
+#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */
+#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */
+#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */
+#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T)
+#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S)
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */
+#else
+#define MSR_TM_ACTIVE(x) 0
+#endif
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+#define MSR_64BIT MSR_SF
+
+/* Server variant */
+#define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
+#ifdef __BIG_ENDIAN__
+#define MSR_ __MSR
+#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV)
+#else
+#define MSR_ (__MSR | MSR_LE)
+#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE)
+#endif
+#define MSR_KERNEL (MSR_ | MSR_64BIT)
+#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE)
+#define MSR_USER64 (MSR_USER32 | MSR_64BIT)
+#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_PPC_8xx)
+/* Default MSR for kernel mode. */
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
+#endif
+
+#ifndef MSR_64BIT
+#define MSR_64BIT 0
+#endif
+
+/* Condition Register related */
+#define CR0_SHIFT 28
+#define CR0_MASK 0xF
+#define CR0_TBEGIN_FAILURE (0x2 << 28) /* 0b0010 */
+
+
+/* Power Management - Processor Stop Status and Control Register Fields */
+#define PSSCR_RL_MASK 0x0000000F /* Requested Level */
+#define PSSCR_MTL_MASK 0x000000F0 /* Maximum Transition Level */
+#define PSSCR_TR_MASK 0x00000300 /* Transition State */
+#define PSSCR_PSLL_MASK 0x000F0000 /* Power-Saving Level Limit */
+#define PSSCR_EC 0x00100000 /* Exit Criterion */
+#define PSSCR_ESL 0x00200000 /* Enable State Loss */
+#define PSSCR_SD 0x00400000 /* Status Disable */
+#define PSSCR_PLS 0xf000000000000000 /* Power-saving Level Status */
+#define PSSCR_PLS_SHIFT 60
+#define PSSCR_GUEST_VIS 0xf0000000000003ffUL /* Guest-visible PSSCR fields */
+#define PSSCR_FAKE_SUSPEND 0x00000400 /* Fake-suspend bit (P9 DD2.2) */
+#define PSSCR_FAKE_SUSPEND_LG 10 /* Fake-suspend bit position */
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX 0x80000000 /* FPU exception summary */
+#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
+#define FPSCR_VX 0x20000000 /* Invalid operation summary */
+#define FPSCR_OX 0x10000000 /* Overflow exception summary */
+#define FPSCR_UX 0x08000000 /* Underflow exception summary */
+#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */
+#define FPSCR_XX 0x02000000 /* Inexact exception summary */
+#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
+#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
+#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
+#define FPSCR_FR 0x00040000 /* Fraction rounded */
+#define FPSCR_FI 0x00020000 /* Fraction inexact */
+#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
+#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
+#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
+#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
+#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
+#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
+#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
+#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
+#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
+#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
+#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
+#define FPSCR_RN 0x00000003 /* FPU rounding control */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
+#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
+#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
+#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
+#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
+#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
+#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
+#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
+#define SPEFSCR_OV 0x00004000 /* Integer overflow */
+#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
+#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
+#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
+#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
+#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
+#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
+#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
+
+/* Special Purpose Registers (SPRNs)*/
+
+#ifdef CONFIG_40x
+#define SPRN_PID 0x3B1 /* Process ID */
+#else
+#define SPRN_PID 0x030 /* Process ID */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
+#endif
+#endif
+
+#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DSCR 0x11
+#define SPRN_CFAR 0x1c /* Come From Address Register */
+#define SPRN_AMR 0x1d /* Authority Mask Register */
+#define SPRN_UAMOR 0x9d /* User Authority Mask Override Register */
+#define SPRN_AMOR 0x15d /* Authority Mask Override Register */
+#define SPRN_ACOP 0x1F /* Available Coprocessor Register */
+#define SPRN_TFIAR 0x81 /* Transaction Failure Inst Addr */
+#define SPRN_TEXASR 0x82 /* Transaction EXception & Summary */
+#define SPRN_TEXASRU 0x83 /* '' '' '' Upper 32 */
+
+#define TEXASR_FC_LG (63 - 7) /* Failure Code */
+#define TEXASR_AB_LG (63 - 31) /* Abort */
+#define TEXASR_SU_LG (63 - 32) /* Suspend */
+#define TEXASR_HV_LG (63 - 34) /* Hypervisor state*/
+#define TEXASR_PR_LG (63 - 35) /* Privilege level */
+#define TEXASR_FS_LG (63 - 36) /* failure summary */
+#define TEXASR_EX_LG (63 - 37) /* TFIAR exact bit */
+#define TEXASR_ROT_LG (63 - 38) /* ROT bit */
+
+#define TEXASR_ABORT __MASK(TEXASR_AB_LG) /* terminated by tabort or treclaim */
+#define TEXASR_SUSP __MASK(TEXASR_SU_LG) /* tx failed in suspended state */
+#define TEXASR_HV __MASK(TEXASR_HV_LG) /* MSR[HV] when failure occurred */
+#define TEXASR_PR __MASK(TEXASR_PR_LG) /* MSR[PR] when failure occurred */
+#define TEXASR_FS __MASK(TEXASR_FS_LG) /* TEXASR Failure Summary */
+#define TEXASR_EXACT __MASK(TEXASR_EX_LG) /* TFIAR value is exact */
+#define TEXASR_ROT __MASK(TEXASR_ROT_LG)
+#define TEXASR_FC (ASM_CONST(0xFF) << TEXASR_FC_LG)
+
+#define SPRN_TFHAR 0x80 /* Transaction Failure Handler Addr */
+
+#define SPRN_TIDR 144 /* Thread ID register */
+#define SPRN_CTRLF 0x088
+#define SPRN_CTRLT 0x098
+#define CTRL_CT 0xc0000000 /* current thread */
+#define CTRL_CT0 0x80000000 /* thread 0 */
+#define CTRL_CT1 0x40000000 /* thread 1 */
+#define CTRL_TE 0x00c00000 /* thread enable */
+#define CTRL_RUNLATCH 0x1
+#define SPRN_DAWR 0xB4
+#define SPRN_RPR 0xBA /* Relative Priority Register */
+#define SPRN_CIABR 0xBB
+#define CIABR_PRIV 0x3
+#define CIABR_PRIV_USER 1
+#define CIABR_PRIV_SUPER 2
+#define CIABR_PRIV_HYPER 3
+#define SPRN_DAWRX 0xBC
+#define DAWRX_USER __MASK(0)
+#define DAWRX_KERNEL __MASK(1)
+#define DAWRX_HYP __MASK(2)
+#define DAWRX_WTI __MASK(3)
+#define DAWRX_WT __MASK(4)
+#define DAWRX_DR __MASK(5)
+#define DAWRX_DW __MASK(6)
+#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
+#define SPRN_DABR2 0x13D /* e300 */
+#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
+#define DABRX_USER __MASK(0)
+#define DABRX_KERNEL __MASK(1)
+#define DABRX_HYP __MASK(2)
+#define DABRX_BTI __MASK(3)
+#define DABRX_ALL (DABRX_BTI | DABRX_HYP | DABRX_KERNEL | DABRX_USER)
+#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */
+#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#define DSISR_BAD_DIRECT_ST 0x80000000 /* Obsolete: Direct store error */
+#define DSISR_NOHPTE 0x40000000 /* no translation found */
+#define DSISR_ATTR_CONFLICT 0x20000000 /* P9: Process vs. Partition attr */
+#define DSISR_NOEXEC_OR_G 0x10000000 /* Alias of SRR1 bit, see below */
+#define DSISR_PROTFAULT 0x08000000 /* protection fault */
+#define DSISR_BADACCESS 0x04000000 /* bad access to CI or G */
+#define DSISR_ISSTORE 0x02000000 /* access was a store */
+#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
+#define DSISR_NOSEGMENT 0x00200000 /* STAB miss (unsupported) */
+#define DSISR_KEYFAULT 0x00200000 /* Storage Key fault */
+#define DSISR_BAD_EXT_CTRL 0x00100000 /* Obsolete: External ctrl error */
+#define DSISR_UNSUPP_MMU 0x00080000 /* P9: Unsupported MMU config */
+#define DSISR_SET_RC 0x00040000 /* P9: Failed setting of R/C bits */
+#define DSISR_PRTABLE_FAULT 0x00020000 /* P9: Fault on process table */
+#define DSISR_ICSWX_NO_CT 0x00004000 /* P7: icswx unavailable cp type */
+#define DSISR_BAD_COPYPASTE 0x00000008 /* P9: Copy/Paste on wrong memtype */
+#define DSISR_BAD_AMO 0x00000004 /* P9: Incorrect AMO opcode */
+#define DSISR_BAD_CI_LDST 0x00000002 /* P8: Bad HV CI load/store */
+
+/*
+ * DSISR_NOEXEC_OR_G doesn't actually exist. This bit is always
+ * 0 on DSIs. However, on ISIs, the corresponding bit in SRR1
+ * indicates an attempt at executing from a no-execute PTE
+ * or segment or from a guarded page.
+ *
+ * We add a definition here for completeness as we alias
+ * DSISR and SRR1 in do_page_fault.
+ */
+
+/*
+ * DSISR bits that are treated as a fault. Any bit set
+ * here will skip hash_page, and cause do_page_fault to
+ * trigger a SIGBUS or SIGSEGV:
+ */
+#define DSISR_BAD_FAULT_32S (DSISR_BAD_DIRECT_ST | \
+ DSISR_BADACCESS | \
+ DSISR_BAD_EXT_CTRL)
+#define DSISR_BAD_FAULT_64S (DSISR_BAD_FAULT_32S | \
+ DSISR_ATTR_CONFLICT | \
+ DSISR_UNSUPP_MMU | \
+ DSISR_PRTABLE_FAULT | \
+ DSISR_ICSWX_NO_CT | \
+ DSISR_BAD_COPYPASTE | \
+ DSISR_BAD_AMO | \
+ DSISR_BAD_CI_LDST)
+/*
+ * These bits are equivalent in SRR1 and DSISR for 0x400
+ * instruction access interrupts on Book3S
+ */
+#define DSISR_SRR1_MATCH_32S (DSISR_NOHPTE | \
+ DSISR_NOEXEC_OR_G | \
+ DSISR_PROTFAULT)
+#define DSISR_SRR1_MATCH_64S (DSISR_SRR1_MATCH_32S | \
+ DSISR_KEYFAULT | \
+ DSISR_UNSUPP_MMU | \
+ DSISR_SET_RC | \
+ DSISR_PRTABLE_FAULT)
+
+#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
+#define SPRN_CIR 0x11B /* Chip Information Register (hyper, R/0) */
+#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
+#define SPRN_TBU40 0x11E /* Timebase upper 40 bits (hyper, R/W) */
+#define SPRN_SPURR 0x134 /* Scaled PURR */
+#define SPRN_HSPRG0 0x130 /* Hypervisor Scratch 0 */
+#define SPRN_HSPRG1 0x131 /* Hypervisor Scratch 1 */
+#define SPRN_HDSISR 0x132
+#define SPRN_HDAR 0x133
+#define SPRN_HDEC 0x136 /* Hypervisor Decrementer */
+#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
+#define SPRN_RMOR 0x138 /* Real mode offset register */
+#define SPRN_HRMOR 0x139 /* Real mode offset register */
+#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
+#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
+#define SPRN_ASDR 0x330 /* Access segment descriptor register */
+#define SPRN_IC 0x350 /* Virtual Instruction Count */
+#define SPRN_VTB 0x351 /* Virtual Time Base */
+#define SPRN_LDBAR 0x352 /* LD Base Address Register */
+#define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */
+#define SPRN_PMSR 0x355 /* Power Management Status Reg */
+#define SPRN_PMMAR 0x356 /* Power Management Memory Activity Register */
+#define SPRN_PSSCR 0x357 /* Processor Stop Status and Control Register (ISA 3.0) */
+#define SPRN_PSSCR_PR 0x337 /* PSSCR ISA 3.0, privileged mode access */
+#define SPRN_PMCR 0x374 /* Power Management Control Register */
+#define SPRN_RWMR 0x375 /* Region-Weighting Mode Register */
+
+/* HFSCR and FSCR bit numbers are the same */
+#define FSCR_SCV_LG 12 /* Enable System Call Vectored */
+#define FSCR_MSGP_LG 10 /* Enable MSGP */
+#define FSCR_TAR_LG 8 /* Enable Target Address Register */
+#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
+#define FSCR_TM_LG 5 /* Enable Transactional Memory */
+#define FSCR_BHRB_LG 4 /* Enable Branch History Rolling Buffer*/
+#define FSCR_PM_LG 3 /* Enable prob/priv access to PMU SPRs */
+#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */
+#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */
+#define FSCR_FP_LG 0 /* Enable Floating Point */
+#define SPRN_FSCR 0x099 /* Facility Status & Control Register */
+#define FSCR_SCV __MASK(FSCR_SCV_LG)
+#define FSCR_TAR __MASK(FSCR_TAR_LG)
+#define FSCR_EBB __MASK(FSCR_EBB_LG)
+#define FSCR_DSCR __MASK(FSCR_DSCR_LG)
+#define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */
+#define HFSCR_MSGP __MASK(FSCR_MSGP_LG)
+#define HFSCR_TAR __MASK(FSCR_TAR_LG)
+#define HFSCR_EBB __MASK(FSCR_EBB_LG)
+#define HFSCR_TM __MASK(FSCR_TM_LG)
+#define HFSCR_PM __MASK(FSCR_PM_LG)
+#define HFSCR_BHRB __MASK(FSCR_BHRB_LG)
+#define HFSCR_DSCR __MASK(FSCR_DSCR_LG)
+#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG)
+#define HFSCR_FP __MASK(FSCR_FP_LG)
+#define HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56) /* interrupt cause */
+#define SPRN_TAR 0x32f /* Target Address Register */
+#define SPRN_LPCR 0x13E /* LPAR Control Register */
+#define LPCR_VPM0 ASM_CONST(0x8000000000000000)
+#define LPCR_VPM1 ASM_CONST(0x4000000000000000)
+#define LPCR_ISL ASM_CONST(0x2000000000000000)
+#define LPCR_VC_SH 61
+#define LPCR_DPFD_SH 52
+#define LPCR_DPFD (ASM_CONST(7) << LPCR_DPFD_SH)
+#define LPCR_VRMASD_SH 47
+#define LPCR_VRMASD (ASM_CONST(0x1f) << LPCR_VRMASD_SH)
+#define LPCR_VRMA_L ASM_CONST(0x0008000000000000)
+#define LPCR_VRMA_LP0 ASM_CONST(0x0001000000000000)
+#define LPCR_VRMA_LP1 ASM_CONST(0x0000800000000000)
+#define LPCR_RMLS 0x1C000000 /* Implementation dependent RMO limit sel */
+#define LPCR_RMLS_SH 26
+#define LPCR_ILE ASM_CONST(0x0000000002000000) /* !HV irqs set MSR:LE */
+#define LPCR_AIL ASM_CONST(0x0000000001800000) /* Alternate interrupt location */
+#define LPCR_AIL_0 ASM_CONST(0x0000000000000000) /* MMU off exception offset 0x0 */
+#define LPCR_AIL_3 ASM_CONST(0x0000000001800000) /* MMU on exception offset 0xc00...4xxx */
+#define LPCR_ONL ASM_CONST(0x0000000000040000) /* online - PURR/SPURR count */
+#define LPCR_LD ASM_CONST(0x0000000000020000) /* large decremeter */
+#define LPCR_PECE ASM_CONST(0x000000000001f000) /* powersave exit cause enable */
+#define LPCR_PECEDP ASM_CONST(0x0000000000010000) /* directed priv dbells cause exit */
+#define LPCR_PECEDH ASM_CONST(0x0000000000008000) /* directed hyp dbells cause exit */
+#define LPCR_PECE0 ASM_CONST(0x0000000000004000) /* ext. exceptions can cause exit */
+#define LPCR_PECE1 ASM_CONST(0x0000000000002000) /* decrementer can cause exit */
+#define LPCR_PECE2 ASM_CONST(0x0000000000001000) /* machine check etc can cause exit */
+#define LPCR_PECE_HVEE ASM_CONST(0x0000400000000000) /* P9 Wakeup on HV interrupts */
+#define LPCR_MER ASM_CONST(0x0000000000000800) /* Mediated External Exception */
+#define LPCR_MER_SH 11
+#define LPCR_GTSE ASM_CONST(0x0000000000000400) /* Guest Translation Shootdown Enable */
+#define LPCR_TC ASM_CONST(0x0000000000000200) /* Translation control */
+#define LPCR_HEIC ASM_CONST(0x0000000000000010) /* Hypervisor External Interrupt Control */
+#define LPCR_LPES 0x0000000c
+#define LPCR_LPES0 ASM_CONST(0x0000000000000008) /* LPAR Env selector 0 */
+#define LPCR_LPES1 ASM_CONST(0x0000000000000004) /* LPAR Env selector 1 */
+#define LPCR_LPES_SH 2
+#define LPCR_RMI ASM_CONST(0x0000000000000002) /* real mode is cache inhibit */
+#define LPCR_HVICE ASM_CONST(0x0000000000000002) /* P9: HV interrupt enable */
+#define LPCR_HDICE ASM_CONST(0x0000000000000001) /* Hyp Decr enable (HV,PR,EE) */
+#define LPCR_UPRT ASM_CONST(0x0000000000400000) /* Use Process Table (ISA 3) */
+#define LPCR_HR ASM_CONST(0x0000000000100000)
+#ifndef SPRN_LPID
+#define SPRN_LPID 0x13F /* Logical Partition Identifier */
+#endif
+#define LPID_RSVD 0x3ff /* Reserved LPID for partn switching */
+#define SPRN_HMER 0x150 /* Hypervisor maintenance exception reg */
+#define HMER_DEBUG_TRIG (1ul << (63 - 17)) /* Debug trigger */
+#define SPRN_HMEER 0x151 /* Hyp maintenance exception enable reg */
+#define SPRN_PCR 0x152 /* Processor compatibility register */
+#define PCR_VEC_DIS (__MASK(63-0)) /* Vec. disable (bit NA since POWER8) */
+#define PCR_VSX_DIS (__MASK(63-1)) /* VSX disable (bit NA since POWER8) */
+#define PCR_TM_DIS (__MASK(63-2)) /* Trans. memory disable (POWER8) */
+#define PCR_HIGH_BITS (PCR_VEC_DIS | PCR_VSX_DIS | PCR_TM_DIS)
+/*
+ * These bits are used in the function kvmppc_set_arch_compat() to specify and
+ * determine both the compatibility level which we want to emulate and the
+ * compatibility level which the host is capable of emulating.
+ */
+#define PCR_ARCH_207 0x8 /* Architecture 2.07 */
+#define PCR_ARCH_206 0x4 /* Architecture 2.06 */
+#define PCR_ARCH_205 0x2 /* Architecture 2.05 */
+#define PCR_LOW_BITS (PCR_ARCH_207 | PCR_ARCH_206 | PCR_ARCH_205)
+#define PCR_MASK ~(PCR_HIGH_BITS | PCR_LOW_BITS) /* PCR Reserved Bits */
+#define SPRN_HEIR 0x153 /* Hypervisor Emulated Instruction Register */
+#define SPRN_TLBINDEXR 0x154 /* P7 TLB control register */
+#define SPRN_TLBVPNR 0x155 /* P7 TLB control register */
+#define SPRN_TLBRPNR 0x156 /* P7 TLB control register */
+#define SPRN_TLBLPIDR 0x157 /* P7 TLB control register */
+#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
+#define SPRN_PPR 0x380 /* SMT Thread status Register */
+#define SPRN_TSCR 0x399 /* Thread Switch Control Register */
+
+#define SPRN_DEC 0x016 /* Decrement Register */
+#define SPRN_DER 0x095 /* Debug Enable Register */
+#define DER_RSTE 0x40000000 /* Reset Interrupt */
+#define DER_CHSTPE 0x20000000 /* Check Stop */
+#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
+#define DER_EXTIE 0x02000000 /* External Interrupt */
+#define DER_ALIE 0x01000000 /* Alignment Interrupt */
+#define DER_PRIE 0x00800000 /* Program Interrupt */
+#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
+#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
+#define DER_SYSIE 0x00040000 /* System Call Interrupt */
+#define DER_TRE 0x00020000 /* Trace Interrupt */
+#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
+#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
+#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
+#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
+#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#define SPRN_DHDES 0x0B1 /* Directed Hyp. Doorbell Exc. State */
+#define SPRN_DPDES 0x0B0 /* Directed Priv. Doorbell Exc. State */
+#define SPRN_EAR 0x11A /* External Address Register */
+#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
+#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Register */
+#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+#define HID0_HDICE_SH (63 - 23) /* 970 HDEC interrupt enable */
+#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
+#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
+#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
+#define HID0_SBCLK (1<<27)
+#define HID0_EICE (1<<26)
+#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
+#define HID0_ECLK (1<<25)
+#define HID0_PAR (1<<24)
+#define HID0_STEN (1<<24) /* Software table search enable - 745x */
+#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
+#define HID0_DOZE (1<<23)
+#define HID0_NAP (1<<22)
+#define HID0_SLEEP (1<<21)
+#define HID0_DPM (1<<20)
+#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
+#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
+#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
+#define HID0_ICE (1<<15) /* Instruction Cache Enable */
+#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
+#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
+#define HID0_DCI (1<<10) /* Data Cache Invalidate */
+#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_DAPUEN (1<<8) /* Debug APU enable */
+#define HID0_SGE (1<<7) /* Store Gathering Enable */
+#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
+#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
+#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
+#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
+#define HID0_ABE (1<<3) /* Address Broadcast Enable */
+#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
+#define HID0_BHTE (1<<2) /* Branch History Table Enable */
+#define HID0_BTCD (1<<1) /* Branch target cache disable */
+#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
+/* POWER8 HID0 bits */
+#define HID0_POWER8_4LPARMODE __MASK(61)
+#define HID0_POWER8_2LPARMODE __MASK(57)
+#define HID0_POWER8_1TO2LPAR __MASK(52)
+#define HID0_POWER8_1TO4LPAR __MASK(51)
+#define HID0_POWER8_DYNLPARDIS __MASK(48)
+
+/* POWER9 HID0 bits */
+#define HID0_POWER9_RADIX __MASK(63 - 8)
+
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#ifdef CONFIG_PPC_BOOK3S_32
+#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
+#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
+#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
+#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
+#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
+#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
+#define HID1_PS (1<<16) /* 750FX PLL selection */
+#endif
+#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
+#define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */
+#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#define SPRN_IABR2 0x3FA /* 83xx */
+#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
+#define SPRN_IAMR 0x03D /* Instr. Authority Mask Reg */
+#define SPRN_HID4 0x3F4 /* 970 HID4 */
+#define HID4_LPES0 (1ul << (63-0)) /* LPAR env. sel. bit 0 */
+#define HID4_RMLS2_SH (63 - 2) /* Real mode limit bottom 2 bits */
+#define HID4_LPID5_SH (63 - 6) /* partition ID bottom 4 bits */
+#define HID4_RMOR_SH (63 - 22) /* real mode offset (16 bits) */
+#define HID4_RMOR (0xFFFFul << HID4_RMOR_SH)
+#define HID4_LPES1 (1 << (63-57)) /* LPAR env. sel. bit 1 */
+#define HID4_RMLS0_SH (63 - 58) /* Real mode limit top bit */
+#define HID4_LPID1_SH 0 /* partition ID top 2 bits */
+#define SPRN_HID4_GEKKO 0x3F3 /* Gekko HID4 */
+#define SPRN_HID5 0x3F6 /* 970 HID5 */
+#define SPRN_HID6 0x3F9 /* BE HID 6 */
+#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */
+#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */
+#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */
+#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */
+#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */
+#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 0x3FD /* Thread switch control on others */
+#define SPRN_TST 0x3FC /* Thread switch timeout on others */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
+#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
+#ifndef SPRN_ICTRL
+#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
+#endif
+#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
+#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
+#define ICTRL_EICP 0x00000100 /* enable icache par. check */
+#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Register */
+#define SPRN_L2CR2 0x3f8
+#define L2CR_L2E 0x80000000 /* L2 enable */
+#define L2CR_L2PE 0x40000000 /* L2 parity enable */
+#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
+#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
+#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
+#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
+#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
+#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
+#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
+#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
+#define L2CR_L2DO 0x00400000 /* L2 data only */
+#define L2CR_L2I 0x00200000 /* L2 global invalidate */
+#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
+#define L2CR_L2WT 0x00080000 /* L2 write-through */
+#define L2CR_L2TS 0x00040000 /* L2 test support */
+#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
+#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
+#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
+#define L2CR_L2DF 0x00004000 /* L2 differential clock */
+#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
+#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
+#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
+#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
+#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
+#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Register */
+#define L3CR_L3E 0x80000000 /* L3 enable */
+#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
+#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
+#define L3CR_L3SIZ 0x10000000 /* L3 size */
+#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
+#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
+#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
+#define L3CR_L3IO 0x00400000 /* L3 instruction only */
+#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
+#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
+#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
+#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
+#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
+#define L3CR_L3I 0x00000400 /* L3 global invalidate */
+#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
+#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO 0x00000040 /* L3 data only mode */
+#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
+#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
+
+#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
+#define SPRN_LDSTDB 0x3f4 /* */
+#define SPRN_LR 0x008 /* Link Register */
+#ifndef SPRN_PIR
+#define SPRN_PIR 0x3FF /* Processor Identification Register */
+#endif
+#define SPRN_TIR 0x1BE /* Thread Identification Register */
+#define SPRN_PTCR 0x1D0 /* Partition table control Register */
+#define SPRN_PSPB 0x09F /* Problem State Priority Boost reg */
+#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
+#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
+#define SPRN_ASR 0x118 /* Address Space Register */
+#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
+#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
+#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
+#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
+#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_USPRG3 0x103 /* SPRG3 userspace read */
+#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
+#define SPRN_USPRG4 0x104 /* SPRG4 userspace read */
+#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
+#define SPRN_USPRG5 0x105 /* SPRG5 userspace read */
+#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
+#define SPRN_USPRG6 0x106 /* SPRG6 userspace read */
+#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
+#define SPRN_USPRG7 0x107 /* SPRG7 userspace read */
+#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
+#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#define SRR1_ISI_NOPT 0x40000000 /* ISI: Not found in hash */
+#define SRR1_ISI_N_OR_G 0x10000000 /* ISI: Access is no-exec or G */
+#define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */
+#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
+#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 and 9 */
+#define SRR1_WAKEMCE_RESVD 0x003c0000 /* Unused/reserved value used by MCE wakeup to indicate cause to idle wakeup handler */
+#define SRR1_WAKESYSERR 0x00300000 /* System error */
+#define SRR1_WAKEEE 0x00200000 /* External interrupt */
+#define SRR1_WAKEHVI 0x00240000 /* Hypervisor Virtualization Interrupt (P9) */
+#define SRR1_WAKEMT 0x00280000 /* mtctrl */
+#define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */
+#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
+#define SRR1_WAKEDBELL 0x00140000 /* Privileged doorbell on P8 */
+#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
+#define SRR1_WAKERESET 0x00100000 /* System reset */
+#define SRR1_WAKEHDBELL 0x000c0000 /* Hypervisor doorbell on P8 */
+#define SRR1_WAKESTATE 0x00030000 /* Powersave exit mask [46:47] */
+#define SRR1_WS_HVLOSS 0x00030000 /* HV resources not maintained */
+#define SRR1_WS_GPRLOSS 0x00020000 /* GPRs not maintained */
+#define SRR1_WS_NOLOSS 0x00010000 /* All resources maintained */
+#define SRR1_PROGTM 0x00200000 /* TM Bad Thing */
+#define SRR1_PROGFPE 0x00100000 /* Floating Point Enabled */
+#define SRR1_PROGILL 0x00080000 /* Illegal instruction */
+#define SRR1_PROGPRIV 0x00040000 /* Privileged instruction */
+#define SRR1_PROGTRAP 0x00020000 /* Trap */
+#define SRR1_PROGADDR 0x00010000 /* SRR0 contains subsequent addr */
+
+#define SRR1_MCE_MCP 0x00080000 /* Machine check signal caused interrupt */
+
+#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */
+#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */
+#define HSRR1_DENORM 0x00100000 /* Denorm exception */
+#define HSRR1_HISI_WRITE 0x00010000 /* HISI bcs couldn't update mem */
+
+#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */
+#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */
+#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */
+#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */
+#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */
+
+#ifndef SPRN_SVR
+#define SPRN_SVR 0x11E /* System Version Register */
+#endif
+#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN (1 << 31)
+#define THRM1_TIV (1 << 30)
+#define THRM1_THRES(x) ((x&0x7f)<<23)
+#define THRM3_SITV(x) ((x & 0x1fff) << 1)
+#define THRM1_TID (1<<2)
+#define THRM1_TIE (1<<1)
+#define THRM1_V (1<<0)
+#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
+#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
+#define THRM3_E (1<<0)
+#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
+#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
+#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
+#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
+#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
+#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+
+#define SPRN_MMCR0_GEKKO 0x3B8 /* Gekko Monitor Mode Control Register 0 */
+#define SPRN_MMCR1_GEKKO 0x3BC /* Gekko Monitor Mode Control Register 1 */
+#define SPRN_PMC1_GEKKO 0x3B9 /* Gekko Performance Monitor Control 1 */
+#define SPRN_PMC2_GEKKO 0x3BA /* Gekko Performance Monitor Control 2 */
+#define SPRN_PMC3_GEKKO 0x3BD /* Gekko Performance Monitor Control 3 */
+#define SPRN_PMC4_GEKKO 0x3BE /* Gekko Performance Monitor Control 4 */
+#define SPRN_WPAR_GEKKO 0x399 /* Gekko Write Pipe Address Register */
+
+#define SPRN_SCOMC 0x114 /* SCOM Access Control */
+#define SPRN_SCOMD 0x115 /* SCOM Access DATA */
+
+/* Performance monitor SPRs */
+#ifdef CONFIG_PPC64
+#define SPRN_MMCR0 795
+#define MMCR0_FC 0x80000000UL /* freeze counters */
+#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
+#define MMCR0_KERNEL_DISABLE MMCR0_FCS
+#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
+#define MMCR0_PROBLEM_DISABLE MMCR0_FCP
+#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
+#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
+#define MMCR0_PMXE ASM_CONST(0x04000000) /* perf mon exception enable */
+#define MMCR0_FCECE ASM_CONST(0x02000000) /* freeze ctrs on enabled cond or event */
+#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
+#define MMCR0_BHRBA 0x00200000UL /* BHRB Access allowed in userspace */
+#define MMCR0_EBE 0x00100000UL /* Event based branch enable */
+#define MMCR0_PMCC 0x000c0000UL /* PMC control */
+#define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */
+#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
+#define MMCR0_PMCjCE ASM_CONST(0x00004000) /* PMCj count enable*/
+#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
+#define MMCR0_PMAO_SYNC ASM_CONST(0x00000800) /* PMU intr is synchronous */
+#define MMCR0_C56RUN ASM_CONST(0x00000100) /* PMC5/6 count when RUN=0 */
+/* performance monitor alert has occurred, set to 0 after handling exception */
+#define MMCR0_PMAO ASM_CONST(0x00000080)
+#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */
+#define MMCR0_FC56 0x00000010UL /* freeze counters 5 and 6 */
+#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */
+#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */
+#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */
+#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
+#define SPRN_MMCR1 798
+#define SPRN_MMCR2 785
+#define SPRN_UMMCR2 769
+#define SPRN_MMCRA 0x312
+#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */
+#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL
+#define MMCRA_SDAR_ERAT_MISS 0x20000000UL
+#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */
+#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */
+#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */
+#define MMCRA_SLOT_SHIFT 24
+#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define POWER6_MMCRA_SDSYNC 0x0000080000000000ULL /* SDAR/SIAR synced */
+#define POWER6_MMCRA_SIHV 0x0000040000000000ULL
+#define POWER6_MMCRA_SIPR 0x0000020000000000ULL
+#define POWER6_MMCRA_THRM 0x00000020UL
+#define POWER6_MMCRA_OTHER 0x0000000EUL
+
+#define POWER7P_MMCRA_SIAR_VALID 0x10000000 /* P7+ SIAR contents valid */
+#define POWER7P_MMCRA_SDAR_VALID 0x08000000 /* P7+ SDAR contents valid */
+
+#define SPRN_MMCRH 316 /* Hypervisor monitor mode control register */
+#define SPRN_MMCRS 894 /* Supervisor monitor mode control register */
+#define SPRN_MMCRC 851 /* Core monitor mode control register */
+#define SPRN_EBBHR 804 /* Event based branch handler register */
+#define SPRN_EBBRR 805 /* Event based branch return register */
+#define SPRN_BESCR 806 /* Branch event status and control register */
+#define BESCR_GE 0x8000000000000000ULL /* Global Enable */
+#define SPRN_WORT 895 /* Workload optimization register - thread */
+#define SPRN_WORC 863 /* Workload optimization register - core */
+
+#define SPRN_PMC1 787
+#define SPRN_PMC2 788
+#define SPRN_PMC3 789
+#define SPRN_PMC4 790
+#define SPRN_PMC5 791
+#define SPRN_PMC6 792
+#define SPRN_PMC7 793
+#define SPRN_PMC8 794
+#define SPRN_SIER 784
+#define SIER_SIPR 0x2000000 /* Sampled MSR_PR */
+#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */
+#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */
+#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */
+#define SPRN_SIAR 796
+#define SPRN_SDAR 797
+#define SPRN_TACR 888
+#define SPRN_TCSCR 889
+#define SPRN_CSIGR 890
+#define SPRN_SPMC1 892
+#define SPRN_SPMC2 893
+
+/* When EBB is enabled, some of MMCR0/MMCR2/SIER are user accessible */
+#define MMCR0_USER_MASK (MMCR0_FC | MMCR0_PMXE | MMCR0_PMAO)
+#define MMCR2_USER_MASK 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */
+#define SIER_USER_MASK 0x7fffffUL
+
+#define SPRN_PA6T_MMCR0 795
+#define PA6T_MMCR0_EN0 0x0000000000000001UL
+#define PA6T_MMCR0_EN1 0x0000000000000002UL
+#define PA6T_MMCR0_EN2 0x0000000000000004UL
+#define PA6T_MMCR0_EN3 0x0000000000000008UL
+#define PA6T_MMCR0_EN4 0x0000000000000010UL
+#define PA6T_MMCR0_EN5 0x0000000000000020UL
+#define PA6T_MMCR0_SUPEN 0x0000000000000040UL
+#define PA6T_MMCR0_PREN 0x0000000000000080UL
+#define PA6T_MMCR0_HYPEN 0x0000000000000100UL
+#define PA6T_MMCR0_FCM0 0x0000000000000200UL
+#define PA6T_MMCR0_FCM1 0x0000000000000400UL
+#define PA6T_MMCR0_INTGEN 0x0000000000000800UL
+#define PA6T_MMCR0_INTEN0 0x0000000000001000UL
+#define PA6T_MMCR0_INTEN1 0x0000000000002000UL
+#define PA6T_MMCR0_INTEN2 0x0000000000004000UL
+#define PA6T_MMCR0_INTEN3 0x0000000000008000UL
+#define PA6T_MMCR0_INTEN4 0x0000000000010000UL
+#define PA6T_MMCR0_INTEN5 0x0000000000020000UL
+#define PA6T_MMCR0_DISCNT 0x0000000000040000UL
+#define PA6T_MMCR0_UOP 0x0000000000080000UL
+#define PA6T_MMCR0_TRG 0x0000000000100000UL
+#define PA6T_MMCR0_TRGEN 0x0000000000200000UL
+#define PA6T_MMCR0_TRGREG 0x0000000001600000UL
+#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL
+#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL
+#define PA6T_MMCR0_PROEN 0x0000000008000000UL
+#define PA6T_MMCR0_PROLOG 0x0000000010000000UL
+#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL
+#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL
+#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL
+#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL
+#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL
+#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL
+#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL
+#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL
+#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL
+#define PA6T_MMCR0_PCTEN 0x0000004000000000UL
+#define PA6T_MMCR0_SOCEN 0x0000008000000000UL
+#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL
+
+#define SPRN_PA6T_MMCR1 798
+#define PA6T_MMCR1_ES2 0x00000000000000ffUL
+#define PA6T_MMCR1_ES3 0x000000000000ff00UL
+#define PA6T_MMCR1_ES4 0x0000000000ff0000UL
+#define PA6T_MMCR1_ES5 0x00000000ff000000UL
+
+#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */
+#define SPRN_PA6T_UPMC1 772 /* ... */
+#define SPRN_PA6T_UPMC2 773
+#define SPRN_PA6T_UPMC3 774
+#define SPRN_PA6T_UPMC4 775
+#define SPRN_PA6T_UPMC5 776
+#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */
+#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */
+#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */
+#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */
+#define SPRN_PA6T_PMC0 787
+#define SPRN_PA6T_PMC1 788
+#define SPRN_PA6T_PMC2 789
+#define SPRN_PA6T_PMC3 790
+#define SPRN_PA6T_PMC4 791
+#define SPRN_PA6T_PMC5 792
+#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */
+#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */
+#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */
+#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */
+
+#define SPRN_PA6T_IER 981 /* Icache Error Register */
+#define SPRN_PA6T_DER 982 /* Dcache Error Register */
+#define SPRN_PA6T_BER 862 /* BIU Error Address Register */
+#define SPRN_PA6T_MER 849 /* MMU Error Register */
+
+#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */
+#define SPRN_PA6T_IMA1 881 /* ... */
+#define SPRN_PA6T_IMA2 882
+#define SPRN_PA6T_IMA3 883
+#define SPRN_PA6T_IMA4 884
+#define SPRN_PA6T_IMA5 885
+#define SPRN_PA6T_IMA6 886
+#define SPRN_PA6T_IMA7 887
+#define SPRN_PA6T_IMA8 888
+#define SPRN_PA6T_IMA9 889
+#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */
+#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */
+#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */
+#define SPRN_BKMK 1020 /* Cell Bookmark Register */
+#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */
+
+
+#else /* 32-bit */
+#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
+#define MMCR0_FC 0x80000000UL /* freeze counters */
+#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
+#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
+#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
+#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
+#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */
+#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */
+#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
+#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
+#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/
+#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
+#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */
+#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */
+
+#define SPRN_MMCR1 956
+#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */
+#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */
+#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */
+#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
+#define SPRN_MMCR2 944
+#define SPRN_PMC1 953 /* Performance Counter Register 1 */
+#define SPRN_PMC2 954 /* Performance Counter Register 2 */
+#define SPRN_PMC3 957 /* Performance Counter Register 3 */
+#define SPRN_PMC4 958 /* Performance Counter Register 4 */
+#define SPRN_PMC5 945 /* Performance Counter Register 5 */
+#define SPRN_PMC6 946 /* Performance Counter Register 6 */
+
+#define SPRN_SIAR 955 /* Sampled Instruction Address Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES (1 << 7)
+#define MMCR0_PMC1_ICACHEMISS (5 << 7)
+#define MMCR0_PMC1_DTLB (6 << 7)
+#define MMCR0_PMC2_DCACHEMISS 0x6
+#define MMCR0_PMC2_CYCLES 0x1
+#define MMCR0_PMC2_ITLB 0x7
+#define MMCR0_PMC2_LOADMISSTIME 0x5
+#endif
+
+/*
+ * SPRG usage:
+ *
+ * All 64-bit:
+ * - SPRG1 stores PACA pointer except 64-bit server in
+ * HV mode in which case it is HSPRG0
+ *
+ * 64-bit server:
+ * - SPRG0 scratch for TM recheckpoint/reclaim (reserved for HV on Power4)
+ * - SPRG2 scratch for exception vectors
+ * - SPRG3 CPU and NUMA node for VDSO getcpu (user visible)
+ * - HSPRG0 stores PACA in HV mode
+ * - HSPRG1 scratch for "HV" exceptions
+ *
+ * 64-bit embedded
+ * - SPRG0 generic exception scratch
+ * - SPRG2 TLB exception stack
+ * - SPRG3 critical exception scratch (user visible, sorry!)
+ * - SPRG4 unused (user visible)
+ * - SPRG6 TLB miss scratch (user visible, sorry !)
+ * - SPRG7 CPU and NUMA node for VDSO getcpu (user visible)
+ * - SPRG8 machine check exception scratch
+ * - SPRG9 debug exception scratch
+ *
+ * All 32-bit:
+ * - SPRG3 current thread_struct physical addr pointer
+ * (virtual on BookE, physical on others)
+ *
+ * 32-bit classic:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors
+ * - SPRG2 indicator that we are in RTAS
+ * - SPRG4 (603 only) pseudo TLB LRU data
+ *
+ * 32-bit 40x:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors
+ * - SPRG2 scratch for exception vectors
+ * - SPRG4 scratch for exception vectors (not 403)
+ * - SPRG5 scratch for exception vectors (not 403)
+ * - SPRG6 scratch for exception vectors (not 403)
+ * - SPRG7 scratch for exception vectors (not 403)
+ *
+ * 32-bit 440 and FSL BookE:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors (*)
+ * - SPRG2 scratch for crit interrupts handler
+ * - SPRG4 scratch for exception vectors
+ * - SPRG5 scratch for exception vectors
+ * - SPRG6 scratch for machine check handler
+ * - SPRG7 scratch for exception vectors
+ * - SPRG9 scratch for debug vectors (e500 only)
+ *
+ * Additionally, BookE separates "read" and "write"
+ * of those registers. That allows to use the userspace
+ * readable variant for reads, which can avoid a fault
+ * with KVM type virtualization.
+ *
+ * 32-bit 8xx:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors
+ * - SPRG2 scratch for exception vectors
+ *
+ */
+#ifdef CONFIG_PPC64
+#define SPRN_SPRG_PACA SPRN_SPRG1
+#else
+#define SPRN_SPRG_THREAD SPRN_SPRG3
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2
+#define SPRN_SPRG_HPACA SPRN_HSPRG0
+#define SPRN_SPRG_HSCRATCH0 SPRN_HSPRG1
+#define SPRN_SPRG_VDSO_READ SPRN_USPRG3
+#define SPRN_SPRG_VDSO_WRITE SPRN_SPRG3
+
+#define GET_PACA(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mfspr rX,SPRN_SPRG_PACA; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mfspr rX,SPRN_SPRG_HPACA; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
+
+#define SET_PACA(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mtspr SPRN_SPRG_PACA,rX; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mtspr SPRN_SPRG_HPACA,rX; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
+
+#define GET_SCRATCH0(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mfspr rX,SPRN_SPRG_SCRATCH0; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mfspr rX,SPRN_SPRG_HSCRATCH0; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
+
+#define SET_SCRATCH0(rX) \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ mtspr SPRN_SPRG_SCRATCH0,rX; \
+ FTR_SECTION_ELSE_NESTED(66); \
+ mtspr SPRN_SPRG_HSCRATCH0,rX; \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66)
+
+#else /* CONFIG_PPC_BOOK3S_64 */
+#define GET_SCRATCH0(rX) mfspr rX,SPRN_SPRG_SCRATCH0
+#define SET_SCRATCH0(rX) mtspr SPRN_SPRG_SCRATCH0,rX
+
+#endif
+
+#ifdef CONFIG_PPC_BOOK3E_64
+#define SPRN_SPRG_MC_SCRATCH SPRN_SPRG8
+#define SPRN_SPRG_CRIT_SCRATCH SPRN_SPRG3
+#define SPRN_SPRG_DBG_SCRATCH SPRN_SPRG9
+#define SPRN_SPRG_TLB_EXFRAME SPRN_SPRG2
+#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6
+#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0
+#define SPRN_SPRG_GDBELL_SCRATCH SPRN_SPRG_GEN_SCRATCH
+#define SPRN_SPRG_VDSO_READ SPRN_USPRG7
+#define SPRN_SPRG_VDSO_WRITE SPRN_SPRG7
+
+#define SET_PACA(rX) mtspr SPRN_SPRG_PACA,rX
+#define GET_PACA(rX) mfspr rX,SPRN_SPRG_PACA
+
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_PGDIR SPRN_SPRG2
+#define SPRN_SPRG_603_LRU SPRN_SPRG4
+#endif
+
+#ifdef CONFIG_40x
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2
+#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4
+#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5
+#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6
+#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7
+#endif
+
+#ifdef CONFIG_BOOKE
+#define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_RSCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_WSCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_RSCRATCH_CRIT SPRN_SPRG2
+#define SPRN_SPRG_WSCRATCH_CRIT SPRN_SPRG2
+#define SPRN_SPRG_RSCRATCH2 SPRN_SPRG4R
+#define SPRN_SPRG_WSCRATCH2 SPRN_SPRG4W
+#define SPRN_SPRG_RSCRATCH3 SPRN_SPRG5R
+#define SPRN_SPRG_WSCRATCH3 SPRN_SPRG5W
+#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG1
+#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG1
+#define SPRN_SPRG_RSCRATCH4 SPRN_SPRG7R
+#define SPRN_SPRG_WSCRATCH4 SPRN_SPRG7W
+#ifdef CONFIG_E200
+#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG6W
+#else
+#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG9
+#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG9
+#endif
+#endif
+
+#ifdef CONFIG_PPC_8xx
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2
+#endif
+
+
+
+/*
+ * An mtfsf instruction with the L bit set. On CPUs that support this a
+ * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
+ *
+ * Until binutils gets the new form of mtfsf, hardwire the instruction.
+ */
+#ifdef CONFIG_PPC64
+#define MTFSF_L(REG) \
+ .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
+#else
+#define MTFSF_L(REG) mtfsf 0xff, (REG)
+#endif
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
+
+#define pvr_version_is(pvr) (PVR_VER(mfspr(SPRN_PVR)) == (pvr))
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
+#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
+#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
+#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
+#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
+#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA 0x00200000
+#define PVR_403GB 0x00200100
+#define PVR_403GC 0x00200200
+#define PVR_403GCX 0x00201400
+#define PVR_405GP 0x40110000
+#define PVR_476 0x11a52000
+#define PVR_476FPE 0x7ff50000
+#define PVR_STB03XXX 0x40310000
+#define PVR_NP405H 0x41410000
+#define PVR_NP405L 0x41610000
+#define PVR_601 0x00010000
+#define PVR_602 0x00050000
+#define PVR_603 0x00030000
+#define PVR_603e 0x00060000
+#define PVR_603ev 0x00070000
+#define PVR_603r 0x00071000
+#define PVR_604 0x00040000
+#define PVR_604e 0x00090000
+#define PVR_604r 0x000A0000
+#define PVR_620 0x00140000
+#define PVR_740 0x00080000
+#define PVR_750 PVR_740
+#define PVR_740P 0x10080000
+#define PVR_750P PVR_740P
+#define PVR_7400 0x000C0000
+#define PVR_7410 0x800C0000
+#define PVR_7450 0x80000000
+#define PVR_8540 0x80200000
+#define PVR_8560 0x80200000
+#define PVR_VER_E500V1 0x8020
+#define PVR_VER_E500V2 0x8021
+#define PVR_VER_E500MC 0x8023
+#define PVR_VER_E5500 0x8024
+#define PVR_VER_E6500 0x8040
+
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_8xx 0x00500000
+
+#define PVR_8240 0x00810100
+#define PVR_8245 0x80811014
+#define PVR_8260 PVR_8240
+
+/* 476 Simulator seems to currently have the PVR of the 602... */
+#define PVR_476_ISS 0x00052000
+
+/* 64-bit processors */
+#define PVR_NORTHSTAR 0x0033
+#define PVR_PULSAR 0x0034
+#define PVR_POWER4 0x0035
+#define PVR_ICESTAR 0x0036
+#define PVR_SSTAR 0x0037
+#define PVR_POWER4p 0x0038
+#define PVR_970 0x0039
+#define PVR_POWER5 0x003A
+#define PVR_POWER5p 0x003B
+#define PVR_970FX 0x003C
+#define PVR_POWER6 0x003E
+#define PVR_POWER7 0x003F
+#define PVR_630 0x0040
+#define PVR_630p 0x0041
+#define PVR_970MP 0x0044
+#define PVR_970GX 0x0045
+#define PVR_POWER7p 0x004A
+#define PVR_POWER8E 0x004B
+#define PVR_POWER8NVL 0x004C
+#define PVR_POWER8 0x004D
+#define PVR_POWER9 0x004E
+#define PVR_BE 0x0070
+#define PVR_PA6T 0x0090
+
+/* "Logical" PVR values defined in PAPR, representing architecture levels */
+#define PVR_ARCH_204 0x0f000001
+#define PVR_ARCH_205 0x0f000002
+#define PVR_ARCH_206 0x0f000003
+#define PVR_ARCH_206p 0x0f100003
+#define PVR_ARCH_207 0x0f000004
+#define PVR_ARCH_300 0x0f000005
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr() ({unsigned long rval; \
+ asm volatile("mfmsr %0" : "=r" (rval) : \
+ : "memory"); rval;})
+#ifdef CONFIG_PPC_BOOK3S_64
+#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \
+ : : "r" (v) : "memory")
+#define mtmsr(v) __mtmsrd((v), 0)
+#define __MTMSR "mtmsrd"
+#else
+#define mtmsr(v) asm volatile("mtmsr %0" : \
+ : "r" ((unsigned long)(v)) \
+ : "memory")
+#define __MTMSR "mtmsr"
+#endif
+
+static inline void mtmsr_isync(unsigned long val)
+{
+ asm volatile(__MTMSR " %0; " ASM_FTR_IFCLR("isync", "nop", %1) : :
+ "r" (val), "i" (CPU_FTR_ARCH_206) : "memory");
+}
+
+#define mfspr(rn) ({unsigned long rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#ifndef mtspr
+#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \
+ : "r" ((unsigned long)(v)) \
+ : "memory")
+#endif
+#define wrtspr(rn) asm volatile("mtspr " __stringify(rn) ",0" : \
+ : : "memory")
+
+extern unsigned long msr_check_and_set(unsigned long bits);
+extern bool strict_msr_control;
+extern void __msr_check_and_clear(unsigned long bits);
+static inline void msr_check_and_clear(unsigned long bits)
+{
+ if (strict_msr_control)
+ __msr_check_and_clear(bits);
+}
+
+#ifdef __powerpc64__
+#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
+#define mftb() ({unsigned long rval; \
+ asm volatile( \
+ "90: mfspr %0, %2;\n" \
+ "97: cmpwi %0,0;\n" \
+ " beq- 90b;\n" \
+ "99:\n" \
+ ".section __ftr_fixup,\"a\"\n" \
+ ".align 3\n" \
+ "98:\n" \
+ " .8byte %1\n" \
+ " .8byte %1\n" \
+ " .8byte 97b-98b\n" \
+ " .8byte 99b-98b\n" \
+ " .8byte 0\n" \
+ " .8byte 0\n" \
+ ".previous" \
+ : "=r" (rval) \
+ : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL) : "cr0"); \
+ rval;})
+#else
+#define mftb() ({unsigned long rval; \
+ asm volatile("mfspr %0, %1" : \
+ "=r" (rval) : "i" (SPRN_TBRL)); rval;})
+#endif /* !CONFIG_PPC_CELL */
+
+#else /* __powerpc64__ */
+
+#if defined(CONFIG_PPC_8xx)
+#define mftbl() ({unsigned long rval; \
+ asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu() ({unsigned long rval; \
+ asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#else
+#define mftbl() ({unsigned long rval; \
+ asm volatile("mfspr %0, %1" : "=r" (rval) : \
+ "i" (SPRN_TBRL)); rval;})
+#define mftbu() ({unsigned long rval; \
+ asm volatile("mfspr %0, %1" : "=r" (rval) : \
+ "i" (SPRN_TBRU)); rval;})
+#endif
+#define mftb() mftbl()
+#endif /* !__powerpc64__ */
+
+#define mttbl(v) asm volatile("mttbl %0":: "r"(v))
+#define mttbu(v) asm volatile("mttbu %0":: "r"(v))
+
+#ifdef CONFIG_PPC32
+#define mfsrin(v) ({unsigned int rval; \
+ asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+ rval;})
+
+static inline void mtsrin(u32 val, u32 idx)
+{
+ asm volatile("mtsrin %0, %1" : : "r" (val), "r" (idx));
+}
+#endif
+
+#define proc_trap() asm volatile("trap")
+
+extern unsigned long current_stack_pointer(void);
+
+extern unsigned long scom970_read(unsigned int address);
+extern void scom970_write(unsigned int address, unsigned long value);
+
+struct pt_regs;
+
+extern void ppc_save_regs(struct pt_regs *regs);
+
+static inline void update_power8_hid0(unsigned long hid0)
+{
+ /*
+ * The HID0 update on Power8 should at the very least be
+ * preceded by a a SYNC instruction followed by an ISYNC
+ * instruction
+ */
+ asm volatile("sync; mtspr %0,%1; isync":: "i"(SPRN_HID0), "r"(hid0));
+}
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_REG_H */