ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/powerpc/platforms/maple/pci.c b/marvell/linux/arch/powerpc/platforms/maple/pci.c
new file mode 100644
index 0000000..c86a66d
--- /dev/null
+++ b/marvell/linux/arch/powerpc/platforms/maple/pci.c
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/iommu.h>
+#include <asm/ppc-pci.h>
+#include <asm/isa-bridge.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static struct pci_controller *u3_agp, *u3_ht, *u4_pcie;
+
+static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+ for (; node != 0;node = node->sibling) {
+ const int *bus_range;
+ const unsigned int *class_code;
+ int len;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down */
+ class_code = of_get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ bus_range = of_get_property(node, "bus-range", &len);
+ if (bus_range != NULL && len > 2 * sizeof(int)) {
+ if (bus_range[1] > higher)
+ higher = bus_range[1];
+ }
+ higher = fixup_one_level_bus_range(node->child, higher);
+ }
+ return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init fixup_bus_range(struct device_node *bridge)
+{
+ int *bus_range;
+ struct property *prop;
+ int len;
+
+ /* Lookup the "bus-range" property for the hose */
+ prop = of_find_property(bridge, "bus-range", &len);
+ if (prop == NULL || prop->value == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %pOF\n",
+ bridge);
+ return;
+ }
+ bus_range = prop->value;
+ bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+
+static unsigned long u3_agp_cfa0(u8 devfn, u8 off)
+{
+ return (1 << (unsigned long)PCI_SLOT(devfn)) |
+ ((unsigned long)PCI_FUNC(devfn) << 8) |
+ ((unsigned long)off & 0xFCUL);
+}
+
+static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off)
+{
+ return ((unsigned long)bus << 16) |
+ ((unsigned long)devfn << 8) |
+ ((unsigned long)off & 0xFCUL) |
+ 1UL;
+}
+
+static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, u8 offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ if (dev_fn < (11 << 3))
+ return NULL;
+ caddr = u3_agp_cfa0(dev_fn, offset);
+ } else
+ caddr = u3_agp_cfa1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x07;
+ return hose->cfg_data + offset;
+}
+
+static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ default:
+ out_le32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_agp_pci_ops =
+{
+ .read = u3_agp_read_config,
+ .write = u3_agp_write_config,
+};
+
+static unsigned long u3_ht_cfa0(u8 devfn, u8 off)
+{
+ return (devfn << 8) | off;
+}
+
+static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off)
+{
+ return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL;
+}
+
+static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 devfn, u8 offset)
+{
+ if (bus == hose->first_busno) {
+ if (PCI_SLOT(devfn) == 0)
+ return NULL;
+ return hose->cfg_data + u3_ht_cfa0(devfn, offset);
+ } else
+ return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
+}
+
+static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
+ int len, u32 *val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr;
+ addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_be16(addr);
+ break;
+ default:
+ *val = in_be32(addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
+ int len, u32 val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
+ return PCIBIOS_SUCCESSFUL;
+
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_be16(addr, val);
+ break;
+ default:
+ out_be32(addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_read_config(hose, offset, len, val);
+
+ if (offset > 0xff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_write_config(hose, offset, len, val);
+
+ if (offset > 0xff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ default:
+ out_le32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+ .read = u3_ht_read_config,
+ .write = u3_ht_write_config,
+};
+
+static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
+{
+ return (1 << PCI_SLOT(devfn)) |
+ (PCI_FUNC(devfn) << 8) |
+ ((off >> 8) << 28) |
+ (off & 0xfcu);
+}
+
+static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn,
+ unsigned int off)
+{
+ return (bus << 16) |
+ (devfn << 8) |
+ ((off >> 8) << 28) |
+ (off & 0xfcu) | 1u;
+}
+
+static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, int offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno)
+ caddr = u4_pcie_cfa0(dev_fn, offset);
+ else
+ caddr = u4_pcie_cfa1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x03;
+ return hose->cfg_data + offset;
+}
+
+static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ volatile void __iomem *addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ default:
+ out_le32(addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+ .read = u4_pcie_read_config,
+ .write = u4_pcie_write_config,
+};
+
+static void __init setup_u3_agp(struct pci_controller* hose)
+{
+ /* On G5, we move AGP up to high bus number so we don't need
+ * to reassign bus numbers for HT. If we ever have P2P bridges
+ * on AGP, we'll have to move pci_assign_all_buses to the
+ * pci_controller structure so we enable it for AGP and not for
+ * HT childs.
+ * We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->first_busno = 0xf0;
+ hose->last_busno = 0xff;
+ hose->ops = &u3_agp_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u3_agp = hose;
+}
+
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+ /* We currently only implement the "non-atomic" config space, to
+ * be optimised later.
+ */
+ hose->ops = &u4_pcie_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u4_pcie = hose;
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+ hose->ops = &u3_ht_pci_ops;
+
+ /* We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+ hose->cfg_addr = ioremap(0xf8070000, 0x1000);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xef;
+
+ u3_ht = hose;
+}
+
+static int __init maple_add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ char* disp_name;
+ const int *bus_range;
+ int primary = 1;
+
+ DBG("Adding PCI host bridge %pOF\n", dev);
+
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %pOF, assume bus 0\n",
+ dev);
+ }
+
+ hose = pcibios_alloc_controller(dev);
+ if (hose == NULL)
+ return -ENOMEM;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ hose->controller_ops = maple_pci_controller_ops;
+
+ disp_name = NULL;
+ if (of_device_is_compatible(dev, "u3-agp")) {
+ setup_u3_agp(hose);
+ disp_name = "U3-AGP";
+ primary = 0;
+ } else if (of_device_is_compatible(dev, "u3-ht")) {
+ setup_u3_ht(hose);
+ disp_name = "U3-HT";
+ primary = 1;
+ } else if (of_device_is_compatible(dev, "u4-pcie")) {
+ setup_u4_pcie(hose);
+ disp_name = "U4-PCIE";
+ primary = 0;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
+ disp_name, hose->first_busno, hose->last_busno);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Fixup "bus-range" OF property */
+ fixup_bus_range(dev);
+
+ /* Check for legacy IOs */
+ isa_bridge_find_early(hose);
+
+ return 0;
+}
+
+
+void maple_pci_irq_fixup(struct pci_dev *dev)
+{
+ DBG(" -> maple_pci_irq_fixup\n");
+
+ /* Fixup IRQ for PCIe host */
+ if (u4_pcie != NULL && dev->bus->number == 0 &&
+ pci_bus_to_host(dev->bus) == u4_pcie) {
+ printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
+ dev->irq = irq_create_mapping(NULL, 1);
+ if (dev->irq)
+ irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
+ }
+
+ /* Hide AMD8111 IDE interrupt when in legacy mode so
+ * the driver calls pci_get_legacy_ide_irq()
+ */
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
+ (dev->class & 5) != 5) {
+ dev->irq = 0;
+ }
+
+ DBG(" <- maple_pci_irq_fixup\n");
+}
+
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+
+void __init maple_pci_init(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht = NULL;
+
+ /* Probe root PCI hosts, that is on U3 the AGP host and the
+ * HyperTransport host. That one is actually "kept" around
+ * and actually added last as it's resource management relies
+ * on the AGP resources to have been setup first
+ */
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
+ return;
+ }
+ for_each_child_of_node(root, np) {
+ if (!of_node_is_type(np, "pci") && !of_node_is_type(np, "ht"))
+ continue;
+ if ((of_device_is_compatible(np, "u4-pcie") ||
+ of_device_is_compatible(np, "u3-agp")) &&
+ maple_add_bridge(np) == 0)
+ of_node_get(np);
+
+ if (of_device_is_compatible(np, "u3-ht")) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+ /* Now setup the HyperTransport host if we found any
+ */
+ if (ht && maple_add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
+
+ /* Tell pci.c to not change any resource allocations. */
+ pci_add_flags(PCI_PROBE_ONLY);
+}
+
+int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
+{
+ struct device_node *np;
+ unsigned int defirq = channel ? 15 : 14;
+ unsigned int irq;
+
+ if (pdev->vendor != PCI_VENDOR_ID_AMD ||
+ pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
+ return defirq;
+
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL) {
+ printk("Failed to locate OF node for IDE %s\n",
+ pci_name(pdev));
+ return defirq;
+ }
+ irq = irq_of_parse_and_map(np, channel & 0x1);
+ if (!irq) {
+ printk("Failed to map onboard IDE interrupt for channel %d\n",
+ channel);
+ return defirq;
+ }
+ return irq;
+}
+
+static void quirk_ipr_msi(struct pci_dev *dev)
+{
+ /* Something prevents MSIs from the IPR from working on Bimini,
+ * and the driver has no smarts to recover. So disable MSI
+ * on it for now. */
+
+ if (machine_is(maple)) {
+ dev->no_msi = 1;
+ dev_info(&dev->dev, "Quirk disabled MSI\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+ quirk_ipr_msi);
+
+struct pci_controller_ops maple_pci_controller_ops = {
+};