ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/powerpc/platforms/powermac/sleep.S b/marvell/linux/arch/powerpc/platforms/powermac/sleep.S
new file mode 100644
index 0000000..935dcac
--- /dev/null
+++ b/marvell/linux/arch/powerpc/platforms/powermac/sleep.S
@@ -0,0 +1,444 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * This file contains sleep low-level functions for PowerBook G3.
+ * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * and Paul Mackerras (paulus@samba.org).
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+#include <asm/feature-fixups.h>
+
+#define MAGIC 0x4c617273 /* 'Lars' */
+
+/*
+ * Structure for storing CPU registers on the stack.
+ */
+#define SL_SP 0
+#define SL_PC 4
+#define SL_MSR 8
+#define SL_SDR1 0xc
+#define SL_SPRG0 0x10 /* 4 sprg's */
+#define SL_DBAT0 0x20
+#define SL_IBAT0 0x28
+#define SL_DBAT1 0x30
+#define SL_IBAT1 0x38
+#define SL_DBAT2 0x40
+#define SL_IBAT2 0x48
+#define SL_DBAT3 0x50
+#define SL_IBAT3 0x58
+#define SL_DBAT4 0x60
+#define SL_IBAT4 0x68
+#define SL_DBAT5 0x70
+#define SL_IBAT5 0x78
+#define SL_DBAT6 0x80
+#define SL_IBAT6 0x88
+#define SL_DBAT7 0x90
+#define SL_IBAT7 0x98
+#define SL_TB 0xa0
+#define SL_R2 0xa8
+#define SL_CR 0xac
+#define SL_R12 0xb0 /* r12 to r31 */
+#define SL_SIZE (SL_R12 + 80)
+
+ .section .text
+ .align 5
+
+#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) || \
+ (defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32))
+
+/* This gets called by via-pmu.c late during the sleep process.
+ * The PMU was already send the sleep command and will shut us down
+ * soon. We need to save all that is needed and setup the wakeup
+ * vector that will be called by the ROM on wakeup
+ */
+_GLOBAL(low_sleep_handler)
+#ifndef CONFIG_PPC_BOOK3S_32
+ blr
+#else
+ mflr r0
+ stw r0,4(r1)
+ stwu r1,-SL_SIZE(r1)
+ mfcr r0
+ stw r0,SL_CR(r1)
+ stw r2,SL_R2(r1)
+ stmw r12,SL_R12(r1)
+
+ /* Save MSR & SDR1 */
+ mfmsr r4
+ stw r4,SL_MSR(r1)
+ mfsdr1 r4
+ stw r4,SL_SDR1(r1)
+
+ /* Get a stable timebase and save it */
+1: mftbu r4
+ stw r4,SL_TB(r1)
+ mftb r5
+ stw r5,SL_TB+4(r1)
+ mftbu r3
+ cmpw r3,r4
+ bne 1b
+
+ /* Save SPRGs */
+ mfsprg r4,0
+ stw r4,SL_SPRG0(r1)
+ mfsprg r4,1
+ stw r4,SL_SPRG0+4(r1)
+ mfsprg r4,2
+ stw r4,SL_SPRG0+8(r1)
+ mfsprg r4,3
+ stw r4,SL_SPRG0+12(r1)
+
+ /* Save BATs */
+ mfdbatu r4,0
+ stw r4,SL_DBAT0(r1)
+ mfdbatl r4,0
+ stw r4,SL_DBAT0+4(r1)
+ mfdbatu r4,1
+ stw r4,SL_DBAT1(r1)
+ mfdbatl r4,1
+ stw r4,SL_DBAT1+4(r1)
+ mfdbatu r4,2
+ stw r4,SL_DBAT2(r1)
+ mfdbatl r4,2
+ stw r4,SL_DBAT2+4(r1)
+ mfdbatu r4,3
+ stw r4,SL_DBAT3(r1)
+ mfdbatl r4,3
+ stw r4,SL_DBAT3+4(r1)
+ mfibatu r4,0
+ stw r4,SL_IBAT0(r1)
+ mfibatl r4,0
+ stw r4,SL_IBAT0+4(r1)
+ mfibatu r4,1
+ stw r4,SL_IBAT1(r1)
+ mfibatl r4,1
+ stw r4,SL_IBAT1+4(r1)
+ mfibatu r4,2
+ stw r4,SL_IBAT2(r1)
+ mfibatl r4,2
+ stw r4,SL_IBAT2+4(r1)
+ mfibatu r4,3
+ stw r4,SL_IBAT3(r1)
+ mfibatl r4,3
+ stw r4,SL_IBAT3+4(r1)
+
+BEGIN_MMU_FTR_SECTION
+ mfspr r4,SPRN_DBAT4U
+ stw r4,SL_DBAT4(r1)
+ mfspr r4,SPRN_DBAT4L
+ stw r4,SL_DBAT4+4(r1)
+ mfspr r4,SPRN_DBAT5U
+ stw r4,SL_DBAT5(r1)
+ mfspr r4,SPRN_DBAT5L
+ stw r4,SL_DBAT5+4(r1)
+ mfspr r4,SPRN_DBAT6U
+ stw r4,SL_DBAT6(r1)
+ mfspr r4,SPRN_DBAT6L
+ stw r4,SL_DBAT6+4(r1)
+ mfspr r4,SPRN_DBAT7U
+ stw r4,SL_DBAT7(r1)
+ mfspr r4,SPRN_DBAT7L
+ stw r4,SL_DBAT7+4(r1)
+ mfspr r4,SPRN_IBAT4U
+ stw r4,SL_IBAT4(r1)
+ mfspr r4,SPRN_IBAT4L
+ stw r4,SL_IBAT4+4(r1)
+ mfspr r4,SPRN_IBAT5U
+ stw r4,SL_IBAT5(r1)
+ mfspr r4,SPRN_IBAT5L
+ stw r4,SL_IBAT5+4(r1)
+ mfspr r4,SPRN_IBAT6U
+ stw r4,SL_IBAT6(r1)
+ mfspr r4,SPRN_IBAT6L
+ stw r4,SL_IBAT6+4(r1)
+ mfspr r4,SPRN_IBAT7U
+ stw r4,SL_IBAT7(r1)
+ mfspr r4,SPRN_IBAT7L
+ stw r4,SL_IBAT7+4(r1)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+
+ /* Backup various CPU config stuffs */
+ bl __save_cpu_setup
+
+ /* The ROM can wake us up via 2 different vectors:
+ * - On wallstreet & lombard, we must write a magic
+ * value 'Lars' at address 4 and a pointer to a
+ * memory location containing the PC to resume from
+ * at address 0.
+ * - On Core99, we must store the wakeup vector at
+ * address 0x80 and eventually it's parameters
+ * at address 0x84. I've have some trouble with those
+ * parameters however and I no longer use them.
+ */
+ lis r5,grackle_wake_up@ha
+ addi r5,r5,grackle_wake_up@l
+ tophys(r5,r5)
+ stw r5,SL_PC(r1)
+ lis r4,KERNELBASE@h
+ tophys(r5,r1)
+ addi r5,r5,SL_PC
+ lis r6,MAGIC@ha
+ addi r6,r6,MAGIC@l
+ stw r5,0(r4)
+ stw r6,4(r4)
+ /* Setup stuffs at 0x80-0x84 for Core99 */
+ lis r3,core99_wake_up@ha
+ addi r3,r3,core99_wake_up@l
+ tophys(r3,r3)
+ stw r3,0x80(r4)
+ stw r5,0x84(r4)
+ /* Store a pointer to our backup storage into
+ * a kernel global
+ */
+ lis r3,sleep_storage@ha
+ addi r3,r3,sleep_storage@l
+ stw r5,0(r3)
+
+ .globl low_cpu_die
+low_cpu_die:
+ /* Flush & disable all caches */
+ bl flush_disable_caches
+
+ /* Turn off data relocation. */
+ mfmsr r3 /* Save MSR in r7 */
+ rlwinm r3,r3,0,28,26 /* Turn off DR bit */
+ sync
+ mtmsr r3
+ isync
+
+BEGIN_FTR_SECTION
+ /* Flush any pending L2 data prefetches to work around HW bug */
+ sync
+ lis r3,0xfff0
+ lwz r0,0(r3) /* perform cache-inhibited load to ROM */
+ sync /* (caches are disabled at this point) */
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
+/*
+ * Set the HID0 and MSR for sleep.
+ */
+ mfspr r2,SPRN_HID0
+ rlwinm r2,r2,0,10,7 /* clear doze, nap */
+ oris r2,r2,HID0_SLEEP@h
+ sync
+ isync
+ mtspr SPRN_HID0,r2
+ sync
+
+/* This loop puts us back to sleep in case we have a spurrious
+ * wakeup so that the host bridge properly stays asleep. The
+ * CPU will be turned off, either after a known time (about 1
+ * second) on wallstreet & lombard, or as soon as the CPU enters
+ * SLEEP mode on core99
+ */
+ mfmsr r2
+ oris r2,r2,MSR_POW@h
+1: sync
+ mtmsr r2
+ isync
+ b 1b
+
+/*
+ * Here is the resume code.
+ */
+
+
+/*
+ * Core99 machines resume here
+ * r4 has the physical address of SL_PC(sp) (unused)
+ */
+_GLOBAL(core99_wake_up)
+ /* Make sure HID0 no longer contains any sleep bit and that data cache
+ * is disabled
+ */
+ mfspr r3,SPRN_HID0
+ rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */
+ rlwinm 3,r3,0,18,15 /* clear DCE, ICE */
+ mtspr SPRN_HID0,r3
+ sync
+ isync
+
+ /* sanitize MSR */
+ mfmsr r3
+ ori r3,r3,MSR_EE|MSR_IP
+ xori r3,r3,MSR_EE|MSR_IP
+ sync
+ isync
+ mtmsr r3
+ sync
+ isync
+
+ /* Recover sleep storage */
+ lis r3,sleep_storage@ha
+ addi r3,r3,sleep_storage@l
+ tophys(r3,r3)
+ lwz r1,0(r3)
+
+ /* Pass thru to older resume code ... */
+/*
+ * Here is the resume code for older machines.
+ * r1 has the physical address of SL_PC(sp).
+ */
+
+grackle_wake_up:
+
+ /* Restore the kernel's segment registers before
+ * we do any r1 memory access as we are not sure they
+ * are in a sane state above the first 256Mb region
+ */
+ bl load_segment_registers
+ sync
+ isync
+
+ subi r1,r1,SL_PC
+
+ /* Restore various CPU config stuffs */
+ bl __restore_cpu_setup
+
+ /* Make sure all FPRs have been initialized */
+ bl reloc_offset
+ bl __init_fpu_registers
+
+ /* Invalidate & enable L1 cache, we don't care about
+ * whatever the ROM may have tried to write to memory
+ */
+ bl __inval_enable_L1
+
+ /* Restore the BATs, and SDR1. Then we can turn on the MMU. */
+ lwz r4,SL_SDR1(r1)
+ mtsdr1 r4
+ lwz r4,SL_SPRG0(r1)
+ mtsprg 0,r4
+ lwz r4,SL_SPRG0+4(r1)
+ mtsprg 1,r4
+ lwz r4,SL_SPRG0+8(r1)
+ mtsprg 2,r4
+ lwz r4,SL_SPRG0+12(r1)
+ mtsprg 3,r4
+
+ lwz r4,SL_DBAT0(r1)
+ mtdbatu 0,r4
+ lwz r4,SL_DBAT0+4(r1)
+ mtdbatl 0,r4
+ lwz r4,SL_DBAT1(r1)
+ mtdbatu 1,r4
+ lwz r4,SL_DBAT1+4(r1)
+ mtdbatl 1,r4
+ lwz r4,SL_DBAT2(r1)
+ mtdbatu 2,r4
+ lwz r4,SL_DBAT2+4(r1)
+ mtdbatl 2,r4
+ lwz r4,SL_DBAT3(r1)
+ mtdbatu 3,r4
+ lwz r4,SL_DBAT3+4(r1)
+ mtdbatl 3,r4
+ lwz r4,SL_IBAT0(r1)
+ mtibatu 0,r4
+ lwz r4,SL_IBAT0+4(r1)
+ mtibatl 0,r4
+ lwz r4,SL_IBAT1(r1)
+ mtibatu 1,r4
+ lwz r4,SL_IBAT1+4(r1)
+ mtibatl 1,r4
+ lwz r4,SL_IBAT2(r1)
+ mtibatu 2,r4
+ lwz r4,SL_IBAT2+4(r1)
+ mtibatl 2,r4
+ lwz r4,SL_IBAT3(r1)
+ mtibatu 3,r4
+ lwz r4,SL_IBAT3+4(r1)
+ mtibatl 3,r4
+
+BEGIN_MMU_FTR_SECTION
+ lwz r4,SL_DBAT4(r1)
+ mtspr SPRN_DBAT4U,r4
+ lwz r4,SL_DBAT4+4(r1)
+ mtspr SPRN_DBAT4L,r4
+ lwz r4,SL_DBAT5(r1)
+ mtspr SPRN_DBAT5U,r4
+ lwz r4,SL_DBAT5+4(r1)
+ mtspr SPRN_DBAT5L,r4
+ lwz r4,SL_DBAT6(r1)
+ mtspr SPRN_DBAT6U,r4
+ lwz r4,SL_DBAT6+4(r1)
+ mtspr SPRN_DBAT6L,r4
+ lwz r4,SL_DBAT7(r1)
+ mtspr SPRN_DBAT7U,r4
+ lwz r4,SL_DBAT7+4(r1)
+ mtspr SPRN_DBAT7L,r4
+ lwz r4,SL_IBAT4(r1)
+ mtspr SPRN_IBAT4U,r4
+ lwz r4,SL_IBAT4+4(r1)
+ mtspr SPRN_IBAT4L,r4
+ lwz r4,SL_IBAT5(r1)
+ mtspr SPRN_IBAT5U,r4
+ lwz r4,SL_IBAT5+4(r1)
+ mtspr SPRN_IBAT5L,r4
+ lwz r4,SL_IBAT6(r1)
+ mtspr SPRN_IBAT6U,r4
+ lwz r4,SL_IBAT6+4(r1)
+ mtspr SPRN_IBAT6L,r4
+ lwz r4,SL_IBAT7(r1)
+ mtspr SPRN_IBAT7U,r4
+ lwz r4,SL_IBAT7+4(r1)
+ mtspr SPRN_IBAT7L,r4
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+
+ /* Flush all TLBs */
+ lis r4,0x1000
+1: addic. r4,r4,-0x1000
+ tlbie r4
+ blt 1b
+ sync
+
+ /* restore the MSR and turn on the MMU */
+ lwz r3,SL_MSR(r1)
+ bl turn_on_mmu
+
+ /* get back the stack pointer */
+ tovirt(r1,r1)
+
+ /* Restore TB */
+ li r3,0
+ mttbl r3
+ lwz r3,SL_TB(r1)
+ lwz r4,SL_TB+4(r1)
+ mttbu r3
+ mttbl r4
+
+ /* Restore the callee-saved registers and return */
+ lwz r0,SL_CR(r1)
+ mtcr r0
+ lwz r2,SL_R2(r1)
+ lmw r12,SL_R12(r1)
+ addi r1,r1,SL_SIZE
+ lwz r0,4(r1)
+ mtlr r0
+ blr
+
+turn_on_mmu:
+ mflr r4
+ tovirt(r4,r4)
+ mtsrr0 r4
+ mtsrr1 r3
+ sync
+ isync
+ rfi
+
+#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */
+
+ .section .data
+ .balign L1_CACHE_BYTES
+sleep_storage:
+ .long 0
+ .balign L1_CACHE_BYTES, 0
+
+#endif /* CONFIG_PPC_BOOK3S_32 */
+ .section .text