ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/highlander.h b/marvell/linux/arch/sh/include/mach-common/mach/highlander.h
new file mode 100644
index 0000000..66d3e40
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/highlander.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses. */
+#define PA_NORFLASH_ADDR 0x00000000
+#define PA_NORFLASH_SIZE 0x04000000
+
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR 0xa4000000 /* FPGA */
+#define PA_SDPOW (-1)
+
+#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
+#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
+#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR (PA_BCR+0x0900) /* */
+
+#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
+#define IVDR_CK_ON 8 /* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF (-1)
+
+#define PA_BCR 0xa5000000 /* FPGA */
+#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
+#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
+#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
+#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
+#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
+#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
+#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
+#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
+#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
+#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
+#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
+#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
+#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
+#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
+#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
+#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
+#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
+#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
+#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
+#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
+#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
+#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
+#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
+#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
+#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
+#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
+#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
+#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
+#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */
+#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
+
+#define PA_AX88796L 0xa5800400 /* AX88796L Area */
+#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
+#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
+#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
+
+#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
+
+#define IVDR_CK_ON 8 /* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR 0xa4000000 /* FPGA */
+#define PA_SDPOW (-1)
+
+#define PA_PCISCR (PA_BCR+0x0000)
+#define PA_IRLPRA (PA_BCR+0x0002)
+#define PA_IRLPRB (PA_BCR+0x0004)
+#define PA_IRLPRC (PA_BCR+0x0006)
+#define PA_IRLPRD (PA_BCR+0x0008)
+#define IRLCNTR1 (PA_BCR+0x0010)
+#define PA_IRLPRE (PA_BCR+0x000a)
+#define PA_IRLPRF (PA_BCR+0x000c)
+#define PA_EXIRLCR (PA_BCR+0x000e)
+#define PA_IRLMCR1 (PA_BCR+0x0010)
+#define PA_IRLMCR2 (PA_BCR+0x0012)
+#define PA_IRLSSR1 (PA_BCR+0x0014)
+#define PA_IRLSSR2 (PA_BCR+0x0016)
+#define PA_CFTCR (PA_BCR+0x0100)
+#define PA_CFPCR (PA_BCR+0x0102)
+#define PA_PCICR (PA_BCR+0x0110)
+#define PA_IVDRCTL (PA_BCR+0x0112)
+#define PA_IVDRSR (PA_BCR+0x0114)
+#define PA_PDRSTCR (PA_BCR+0x0116)
+#define PA_POFF (PA_BCR+0x0120)
+#define PA_LCDCR (PA_BCR+0x0130)
+#define PA_TPCR (PA_BCR+0x0140)
+#define PA_TPCKCR (PA_BCR+0x0142)
+#define PA_TPRSTR (PA_BCR+0x0144)
+#define PA_TPXPDR (PA_BCR+0x0146)
+#define PA_TPYPDR (PA_BCR+0x0148)
+#define PA_GPIOPFR (PA_BCR+0x0150)
+#define PA_GPIODR (PA_BCR+0x0152)
+#define PA_OBLED (PA_BCR+0x0154)
+#define PA_SWSR (PA_BCR+0x0156)
+#define PA_VERREG (PA_BCR+0x0158)
+#define PA_SMCR (PA_BCR+0x0200)
+#define PA_SMSMADR (PA_BCR+0x0202)
+#define PA_SMMR (PA_BCR+0x0204)
+#define PA_SMSADR1 (PA_BCR+0x0206)
+#define PA_SMSADR32 (PA_BCR+0x0244)
+#define PA_SMTRDR1 (PA_BCR+0x0246)
+#define PA_SMTRDR16 (PA_BCR+0x0264)
+#define PA_CU3MDR (PA_BCR+0x0300)
+#define PA_CU5MDR (PA_BCR+0x0302)
+#define PA_MMSR (PA_BCR+0x0400)
+
+#define IVDR_CK_ON 4 /* iVDR Clock ON */
+#endif
+
+#define HL_FPGA_IRQ_BASE 200
+#define HL_NR_IRL 15
+
+#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
+#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
+#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4)
+#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5)
+#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6)
+#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7)
+#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8)
+#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9)
+#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10)
+#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11)
+#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
+#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
+#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
+
+unsigned char *highlander_plat_irq_setup(void);
+
+#ifdef CONFIG_SH_R7785RP
+void highlander_plat_pinmux_setup(void);
+#else
+#define highlander_plat_pinmux_setup() do { } while (0)
+#endif
+
+#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/hp6xx.h b/marvell/linux/arch/sh/include/mach-common/mach/hp6xx.h
new file mode 100644
index 0000000..71241f0
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/hp6xx.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
+ */
+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+#include <linux/sh_intc.h>
+
+#define HP680_BTN_IRQ evt2irq(0x600) /* IRQ0_IRQ */
+#define HP680_TS_IRQ evt2irq(0x660) /* IRQ3_IRQ */
+#define HP680_HD64461_IRQ evt2irq(0x680) /* IRQ4_IRQ */
+
+#define DAC_LCD_BRIGHTNESS 0
+#define DAC_SPEAKER_VOLUME 1
+
+#define PGDR_OPENED 0x01
+#define PGDR_MAIN_BATTERY_OUT 0x04
+#define PGDR_PLAY_BUTTON 0x08
+#define PGDR_REWIND_BUTTON 0x10
+#define PGDR_RECORD_BUTTON 0x20
+
+#define PHDR_TS_PEN_DOWN 0x08
+
+#define PJDR_LED_BLINK 0x02
+
+#define PKDR_LED_GREEN 0x10
+
+/* HP Palmtop 620lx/660lx speaker on/off */
+#define PKDR_SPEAKER 0x20
+
+#define SCPDR_TS_SCAN_ENABLE 0x20
+#define SCPDR_TS_SCAN_Y 0x02
+#define SCPDR_TS_SCAN_X 0x01
+
+#define SCPCR_TS_ENABLE 0x405
+#define SCPCR_TS_MASK 0xc0f
+
+#define ADC_CHANNEL_TS_Y 1
+#define ADC_CHANNEL_TS_X 2
+#define ADC_CHANNEL_BATTERY 3
+#define ADC_CHANNEL_BACKUP 4
+#define ADC_CHANNEL_CHARGE 5
+
+/* HP Jornada 680/690 speaker on/off */
+#define HD64461_GPADR_SPEAKER 0x01
+#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
+
+#define HD64461_GPBDR_LCDOFF 0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
+#define HD64461_GPBDR_LED_RED 0x80
+
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR 0xa4000130
+#define PKDR 0xa4000132
+
+#endif /* __ASM_SH_HP6XX_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/lboxre2.h b/marvell/linux/arch/sh/include/mach-common/mach/lboxre2.h
new file mode 100644
index 0000000..5b6bb8e
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/lboxre2.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_LBOXRE2_H
+#define __ASM_SH_LBOXRE2_H
+
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 support
+ */
+#include <linux/sh_intc.h>
+
+#define IRQ_CF1 evt2irq(0x320) /* CF1 */
+#define IRQ_CF0 evt2irq(0x340) /* CF0 */
+#define IRQ_INTD evt2irq(0x360) /* INTD */
+#define IRQ_ETH1 evt2irq(0x380) /* Ether1 */
+#define IRQ_ETH0 evt2irq(0x3a0) /* Ether0 */
+#define IRQ_INTA evt2irq(0x3c0) /* INTA */
+
+void init_lboxre2_IRQ(void);
+
+#define __IO_PREFIX lboxre2
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_LBOXRE2_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/magicpanelr2.h b/marvell/linux/arch/sh/include/mach-common/mach/magicpanelr2.h
new file mode 100644
index 0000000..c2d218c
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * include/asm-sh/magicpanelr2.h
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * I/O addresses and bitmasks for Magic Panel Release 2 board
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <linux/gpio.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) & ~mask, reg)
+
+
+#define PA_LED PORT_PADR /* LED */
+
+
+/* BSC */
+#define CMNCR 0xA4FD0000UL
+#define CS0BCR 0xA4FD0004UL
+#define CS2BCR 0xA4FD0008UL
+#define CS3BCR 0xA4FD000CUL
+#define CS4BCR 0xA4FD0010UL
+#define CS5ABCR 0xA4FD0014UL
+#define CS5BBCR 0xA4FD0018UL
+#define CS6ABCR 0xA4FD001CUL
+#define CS6BBCR 0xA4FD0020UL
+#define CS0WCR 0xA4FD0024UL
+#define CS2WCR 0xA4FD0028UL
+#define CS3WCR 0xA4FD002CUL
+#define CS4WCR 0xA4FD0030UL
+#define CS5AWCR 0xA4FD0034UL
+#define CS5BWCR 0xA4FD0038UL
+#define CS6AWCR 0xA4FD003CUL
+#define CS6BWCR 0xA4FD0040UL
+
+
+/* usb */
+
+#define PORT_UTRCTL 0xA405012CUL
+#define PORT_UCLKCR_W 0xA40A0008UL
+
+#define INTC_ICR0 0xA414FEE0UL
+#define INTC_ICR1 0xA4140010UL
+#define INTC_ICR2 0xA4140012UL
+
+/* MTD */
+
+#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL
+#define MPR2_MTD_KERNEL_SIZE 0x00200000UL
+
+#endif /* __ASM_SH_MAGICPANELR2_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/mangle-port.h b/marvell/linux/arch/sh/include/mach-common/mach/mangle-port.h
new file mode 100644
index 0000000..dd5a761
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/mangle-port.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * SH version cribbed from the MIPS copy:
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __MACH_COMMON_MANGLE_PORT_H
+#define __MACH_COMMON_MANGLE_PORT_H
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time. Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses. The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(x) (x)
+# define __mem_ioswabb(x) (x)
+# define ioswabw(x) le16_to_cpu(x)
+# define __mem_ioswabw(x) (x)
+# define ioswabl(x) le32_to_cpu(x)
+# define __mem_ioswabl(x) (x)
+# define ioswabq(x) le64_to_cpu(x)
+# define __mem_ioswabq(x) (x)
+
+#else
+
+# define ioswabb(x) (x)
+# define __mem_ioswabb(x) (x)
+# define ioswabw(x) (x)
+# define __mem_ioswabw(x) cpu_to_le16(x)
+# define ioswabl(x) (x)
+# define __mem_ioswabl(x) cpu_to_le32(x)
+# define ioswabq(x) (x)
+# define __mem_ioswabq(x) cpu_to_le32(x)
+
+#endif
+
+#endif /* __MACH_COMMON_MANGLE_PORT_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/microdev.h b/marvell/linux/arch/sh/include/mach-common/mach/microdev.h
new file mode 100644
index 0000000..0e2f9ab
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/microdev.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * linux/include/asm-sh/microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * Definitions for the SuperH SH4-202 MicroDev board.
+ */
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA. should be noted that there
+ * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
+#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
+#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */
+#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */
+#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
+
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts. i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA 8
+#define MICRODEV_IRQ_PCI_INTB 9
+#define MICRODEV_IRQ_PCI_INTC 10
+#define MICRODEV_IRQ_PCI_INTD 11
+
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/r2d.h b/marvell/linux/arch/sh/include/mach-common/mach/r2d.h
new file mode 100644
index 0000000..0d7e483
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/r2d.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Board specific addresses. */
+
+#define PA_BCR 0xa4000000 /* FPGA */
+#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
+#define PA_CFCTL 0xa4000004 /* CF Timing control */
+#define PA_CFPOW 0xa4000006 /* CF Power control */
+#define PA_DISPCTL 0xa4000008 /* Display Timing control */
+#define PA_SDMPOW 0xa400000a /* SD Power control */
+#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
+#define PA_PCICD 0xa400000e /* PCI Extension detect control */
+#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
+
+#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
+#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
+#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
+#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */
+#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
+
+#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
+#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
+#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */
+#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
+#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
+
+#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
+#define PA_VERREG 0xa4000032 /* FPGA Version Register */
+#define PA_INPORT 0xa4000034 /* KEY Input Port control */
+#define PA_OUTPORT 0xa4000036 /* LED control */
+#define PA_BVERREG 0xa4000038 /* Board Revision Register */
+
+#define PA_AX88796L 0xaa000400 /* AX88796L Area */
+#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
+#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
+#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
+
+#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
+
+#define R2D_FPGA_IRQ_BASE 100
+
+#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
+#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
+#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
+#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
+#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
+#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
+#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
+#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
+#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
+#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
+#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
+#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
+#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
+#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
+
+/* arch/sh/boards/renesas/rts7751r2d/irq.c */
+void init_rts7751r2d_IRQ(void);
+int rts7751r2d_irq_demux(int);
+
+#endif /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/romimage.h b/marvell/linux/arch/sh/include/mach-common/mach/romimage.h
new file mode 100644
index 0000000..1915714
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/romimage.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef __ASSEMBLY__
+
+/* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+static inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/sdk7780.h b/marvell/linux/arch/sh/include/mach-common/mach/sdk7780.h
new file mode 100644
index 0000000..a27dbe4
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/sdk7780.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_SDK7780_H
+#define __ASM_SH_RENESAS_SDK7780_H
+
+/*
+ * linux/include/asm-sh/sdk7780.h
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ */
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* Box specific addresses. */
+#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
+#define PA_ROM 0xa0000000 /* EPROM */
+#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
+#define PA_FROM 0xa0800000 /* Flash-ROM */
+#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */
+#define PA_EXT1 0xa4000000
+#define PA_EXT1_SIZE 0x04000000
+#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE 0x08000000
+
+#define PA_EXT4 0xb0000000
+#define PA_EXT4_SIZE 0x04000000
+#define PA_EXT_USER PA_EXT4 /* User Expansion Space */
+
+#define PA_PERIPHERAL PA_AREA5_IO
+
+/* SRAM/Reserved */
+#define PA_RESERVED (PA_PERIPHERAL + 0)
+/* FPGA base address */
+#define PA_FPGA (PA_PERIPHERAL + 0x01000000)
+/* SMC LAN91C111 */
+#define PA_LAN (PA_PERIPHERAL + 0x01800000)
+
+
+#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */
+#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */
+#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */
+#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */
+#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */
+#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */
+#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */
+#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */
+#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */
+#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */
+#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */
+#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */
+#define PA_LED FPGA_SLEDR
+#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */
+#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */
+#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */
+#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */
+#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */
+#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */
+#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */
+#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */
+#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */
+#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */
+#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */
+#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */
+
+
+#define SDK7780_NR_IRL 15
+/* IDE/ATA interrupt */
+#define IRQ_CFCARD evt2irq(0x3c0)
+/* SMC interrupt */
+#define IRQ_ETHERNET evt2irq(0x2c0)
+
+
+/* arch/sh/boards/renesas/sdk7780/irq.c */
+void init_sdk7780_IRQ(void);
+
+#define __IO_PREFIX sdk7780
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/secureedge5410.h b/marvell/linux/arch/sh/include/mach-common/mach/secureedge5410.h
new file mode 100644
index 0000000..dfc68aa
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/secureedge5410.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#define __IO_PREFIX snapgear
+#include <asm/io_generic.h>
+
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit Read Write
+ * -----------------------------------------------
+ * D0 DCD on ttySC1 power
+ * D1 Reset Switch heatbeat
+ * D2 ttySC0 CTS (7100) LAN
+ * D3 - WAN
+ * D4 ttySC0 DCD (7100) CONSOLE
+ * D5 - ONLINE
+ * D6 - VPN
+ * D7 - DTR on ttySC1
+ * D8 - ttySC0 RTS (7100)
+ * D9 - ttySC0 DTR (7100)
+ * D10 - RTC SCLK
+ * D11 RTC DATA RTC DATA
+ * D12 - RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+ (secureedge5410_ioport = \
+ ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+ ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/sh2007.h b/marvell/linux/arch/sh/include/mach-common/mach/sh2007.h
new file mode 100644
index 0000000..eeb1290
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/sh2007.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_SH2007_H
+#define __MACH_SH2007_H
+
+#define CS5BCR 0xff802050
+#define CS5WCR 0xff802058
+#define CS5PCR 0xff802070
+
+#define BUS_SZ8 1
+#define BUS_SZ16 2
+#define BUS_SZ32 3
+
+#define PCMCIA_IODYN 1
+#define PCMCIA_ATA 0
+#define PCMCIA_IO8 2
+#define PCMCIA_IO16 3
+#define PCMCIA_COMM8 4
+#define PCMCIA_COMM16 5
+#define PCMCIA_ATTR8 6
+#define PCMCIA_ATTR16 7
+
+#define TYPE_SRAM 0
+#define TYPE_PCMCIA 4
+
+/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWW5 0
+#define IWW6 3
+/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWD5 2
+#define IWRWD6 2
+/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWS5 2
+#define IWRWS6 2
+/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRD5 2
+#define IWRRD6 2
+/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRS5 0
+#define IWRRS6 2
+/* burst count (0-3:4,8,16,32) */
+#define BST5 0
+#define BST6 0
+/* bus size */
+#define SZ5 BUS_SZ16
+#define SZ6 BUS_SZ16
+/* RD hold for SRAM (0-1:0,1) */
+#define RDSPL5 0
+#define RDSPL6 0
+/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
+#define BW5 0
+#define BW6 0
+/* Multiplex (0-1:0,1) */
+#define MPX5 0
+#define MPX6 0
+/* device type */
+#define TYPE5 TYPE_PCMCIA
+#define TYPE6 TYPE_PCMCIA
+/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADS5 0
+#define ADS6 0
+/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADH5 0
+#define ADH6 0
+/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDS5 0
+#define RDS6 0
+/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDH5 0
+#define RDH6 0
+/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTS5 0
+#define WTS6 0
+/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTH5 0
+#define WTH6 0
+/* BS hold (0-1:1,2) */
+#define BSH5 0
+#define BSH6 0
+/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define IW5 6 /* 60ns PIO mode 4 */
+#define IW6 15 /* 250ns */
+
+#define SAA5 PCMCIA_IODYN /* IDE area b4000000-b5ffffff */
+#define SAB5 PCMCIA_IODYN /* CF area b6000000-b7ffffff */
+#define PCWA5 0 /* additional wait A (0-3:0,15,30,50) */
+#define PCWB5 0 /* additional wait B (0-3:0,15,30,50) */
+/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define PCIW5 12
+/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEDA5 2
+/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEDB5 4
+/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEHA5 2
+/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEHB5 3
+
+#define CS5BCR_D ((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)| \
+ (IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)| \
+ (SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
+#define CS5WCR_D ((ADS5<<28)|(ADH5<<24)|(RDS5<<20)| \
+ (RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
+#define CS5PCR_D ((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)| \
+ (PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)| \
+ (TEDB5<<8)|(TEHA5<<4)|TEHB5)
+
+#define SMC0_BASE 0xb0800000 /* eth0 */
+#define SMC1_BASE 0xb0900000 /* eth1 */
+#define CF_BASE 0xb6100000 /* Compact Flash (I/O area) */
+#define IDE_BASE 0xb4000000 /* IDE */
+#define PC104_IO_BASE 0xb8000000
+#define PC104_MEM_BASE 0xba000000
+#define SMC_IO_SIZE 0x100
+
+#define CF_OFFSET 0x1f0
+#define IDE_OFFSET 0x170
+
+#endif /* __MACH_SH2007_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/sh7763rdp.h b/marvell/linux/arch/sh/include/mach-common/mach/sh7763rdp.h
new file mode 100644
index 0000000..301f85a
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/sh7763rdp.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0 0xFFEF0070
+#define PORT_PSEL1 0xFFEF0072
+#define PORT_PSEL2 0xFFEF0074
+#define PORT_PSEL3 0xFFEF0076
+#define PORT_PSEL4 0xFFEF0078
+
+#define PORT_PACR 0xFFEF0000
+#define PORT_PCCR 0xFFEF0004
+#define PORT_PFCR 0xFFEF000A
+#define PORT_PGCR 0xFFEF000C
+#define PORT_PHCR 0xFFEF000E
+#define PORT_PICR 0xFFEF0010
+#define PORT_PJCR 0xFFEF0012
+#define PORT_PKCR 0xFFEF0014
+#define PORT_PLCR 0xFFEF0016
+#define PORT_PMCR 0xFFEF0018
+#define PORT_PNCR 0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG 0xB1000000
+#define CPLD_CPLD_CMD_REG 0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC 0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/sh7785lcr.h b/marvell/linux/arch/sh/include/mach-common/mach/sh7785lcr.h
new file mode 100644
index 0000000..0f3dc3a
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/sh7785lcr.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address | S2-5 = OFF | S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
+ * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C
+ * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
+ * 0x14000000 - 0x17ffffff(CS5) | reserved | USB
+ * 0x18000000 - 0x1bffffff(CS6) | reserved | SD
+ * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR 0x00000000
+#define NOR_FLASH_SIZE 0x04000000
+
+#define PLD_BASE_ADDR 0x04000000
+#define PLD_PCICR (PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR (PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR (PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR (PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
+
+#define PCA9564_ADDR 0x06000000 /* I2C */
+#define PCA9564_SIZE 0x00000100
+
+#define PCA9564_PROTO_32BIT_ADDR 0x14000000
+
+#define SM107_MEM_ADDR 0x10000000
+#define SM107_MEM_SIZE 0x00e00000
+#define SM107_REG_ADDR 0x13e00000
+#define SM107_REG_SIZE 0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR 0x14000000 /* USB */
+#define CG200_ADDR 0x18000000 /* SD */
+#else
+#define R8A66597_ADDR 0x08000000
+#define CG200_ADDR 0x0c000000
+#endif
+
+#define R8A66597_SIZE 0x00000100
+#define CG200_SIZE 0x00010000
+
+#endif /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/shmin.h b/marvell/linux/arch/sh/include/mach-common/mach/shmin.h
new file mode 100644
index 0000000..c2c3e26
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/shmin.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/titan.h b/marvell/linux/arch/sh/include/mach-common/mach/titan.h
new file mode 100644
index 0000000..54df351
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/titan.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Platform definitions for Titan
+ */
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
+
+#include <linux/sh_intc.h>
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN evt2irq(0x240) /* eth0 (WAN) */
+#define TITAN_IRQ_LAN evt2irq(0x2a0) /* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA evt2irq(0x300) /* mPCI A */
+#define TITAN_IRQ_MPCIB evt2irq(0x360) /* mPCI B */
+#define TITAN_IRQ_USB evt2irq(0x360) /* USB */
+
+#endif /* __ASM_SH_TITAN_H */
diff --git a/marvell/linux/arch/sh/include/mach-common/mach/urquell.h b/marvell/linux/arch/sh/include/mach-common/mach/urquell.h
new file mode 100644
index 0000000..6c9bff3
--- /dev/null
+++ b/marvell/linux/arch/sh/include/mach-common/mach/urquell.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_URQUELL_H
+#define __MACH_URQUELL_H
+
+/*
+ * ------ 0x00000000 ------------------------------------
+ * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH
+ * -----+ 0x04000000 ------------------------------------
+ * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH
+ * -----+ 0x08000000 ------------------------------------
+ * CS2 | DDR3
+ * CS3 |
+ * -----+ 0x10000000 ------------------------------------
+ * CS4 | PCIe
+ * -----+ 0x14000000 ------------------------------------
+ * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA
+ * -----+ 0x18000000 ------------------------------------
+ * CS6 | ATA, NAND FLASH
+ * -----+ 0x1c000000 ------------------------------------
+ * CS7 | SH7786 register
+ * -----+------------------------------------------------
+ */
+
+#define NOR_FLASH_ADDR 0x00000000
+#define NOR_FLASH_SIZE 0x04000000
+
+#define CS1_BASE 0x05000000
+#define CS5_BASE 0x15000000
+#define FPGA_BASE CS1_BASE
+
+#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS)
+#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS)
+
+#define SRSTR_OFS 0x0000 /* System reset register */
+#define BDMR_OFS 0x0010 /* Board operating mode resister */
+#define IRL0SR_OFS 0x0020 /* IRL0 Status register */
+#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */
+#define IRL1SR_OFS 0x0040 /* IRL1 Status register */
+#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */
+#define IRL2SR_OFS 0x0060 /* IRL2 Status register */
+#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */
+#define IRL3SR_OFS 0x0080 /* IRL3 Status register */
+#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */
+#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */
+#define SLEDR_OFS 0x0130 /* LED control resister */
+#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */
+#define FPVERR_OFS 0x0150 /* FPGA Version register */
+#define FPDATER_OFS 0x0160 /* FPGA Date register */
+#define FPYEARR_OFS 0x0170 /* FPGA Year register */
+#define TCLKCR_OFS 0x0180 /* TCLK Control register */
+#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */
+#define FPODR_OFS 0x1010 /* Output port data register */
+#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */
+#define FPINDR_OFS 0x1030 /* Input port data register */
+#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */
+#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */
+#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */
+#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */
+#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */
+#define LATCHCR_OFS 0x3000 /* Latch control register */
+#define LATCUAR_OFS 0x3010 /* Latch upper address register */
+#define LATCLAR_OFS 0x3012 /* Latch lower address register */
+#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */
+#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */
+
+#define CHARLED_OFS 0x2000 /* Character LED */
+
+#endif /* __MACH_URQUELL_H */
+