ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/arch/x86/kernel/cpu/microcode/amd.c b/marvell/linux/arch/x86/kernel/cpu/microcode/amd.c
new file mode 100644
index 0000000..2852c99
--- /dev/null
+++ b/marvell/linux/arch/x86/kernel/cpu/microcode/amd.c
@@ -0,0 +1,974 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD CPU Microcode Update Driver for Linux
+ *
+ * This driver allows to upgrade microcode on F10h AMD
+ * CPUs and later.
+ *
+ * Copyright (C) 2008-2011 Advanced Micro Devices Inc.
+ * 2013-2018 Borislav Petkov <bp@alien8.de>
+ *
+ * Author: Peter Oruba <peter.oruba@amd.com>
+ *
+ * Based on work by:
+ * Tigran Aivazian <aivazian.tigran@gmail.com>
+ *
+ * early loader:
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ *
+ * Author: Jacob Shin <jacob.shin@amd.com>
+ * Fixes: Borislav Petkov <bp@suse.de>
+ */
+#define pr_fmt(fmt) "microcode: " fmt
+
+#include <linux/earlycpio.h>
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/initrd.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include <asm/microcode_amd.h>
+#include <asm/microcode.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/cpu.h>
+#include <asm/msr.h>
+
+static struct equiv_cpu_table {
+ unsigned int num_entries;
+ struct equiv_cpu_entry *entry;
+} equiv_table;
+
+/*
+ * This points to the current valid container of microcode patches which we will
+ * save from the initrd/builtin before jettisoning its contents. @mc is the
+ * microcode patch we found to match.
+ */
+struct cont_desc {
+ struct microcode_amd *mc;
+ u32 cpuid_1_eax;
+ u32 psize;
+ u8 *data;
+ size_t size;
+};
+
+static u32 ucode_new_rev;
+
+/* One blob per node. */
+static u8 amd_ucode_patch[MAX_NUMNODES][PATCH_MAX_SIZE];
+
+/*
+ * Microcode patch container file is prepended to the initrd in cpio
+ * format. See Documentation/x86/microcode.rst
+ */
+static const char
+ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin";
+
+static u16 find_equiv_id(struct equiv_cpu_table *et, u32 sig)
+{
+ unsigned int i;
+
+ if (!et || !et->num_entries)
+ return 0;
+
+ for (i = 0; i < et->num_entries; i++) {
+ struct equiv_cpu_entry *e = &et->entry[i];
+
+ if (sig == e->installed_cpu)
+ return e->equiv_cpu;
+
+ e++;
+ }
+ return 0;
+}
+
+/*
+ * Check whether there is a valid microcode container file at the beginning
+ * of @buf of size @buf_size. Set @early to use this function in the early path.
+ */
+static bool verify_container(const u8 *buf, size_t buf_size, bool early)
+{
+ u32 cont_magic;
+
+ if (buf_size <= CONTAINER_HDR_SZ) {
+ if (!early)
+ pr_debug("Truncated microcode container header.\n");
+
+ return false;
+ }
+
+ cont_magic = *(const u32 *)buf;
+ if (cont_magic != UCODE_MAGIC) {
+ if (!early)
+ pr_debug("Invalid magic value (0x%08x).\n", cont_magic);
+
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Check whether there is a valid, non-truncated CPU equivalence table at the
+ * beginning of @buf of size @buf_size. Set @early to use this function in the
+ * early path.
+ */
+static bool verify_equivalence_table(const u8 *buf, size_t buf_size, bool early)
+{
+ const u32 *hdr = (const u32 *)buf;
+ u32 cont_type, equiv_tbl_len;
+
+ if (!verify_container(buf, buf_size, early))
+ return false;
+
+ cont_type = hdr[1];
+ if (cont_type != UCODE_EQUIV_CPU_TABLE_TYPE) {
+ if (!early)
+ pr_debug("Wrong microcode container equivalence table type: %u.\n",
+ cont_type);
+
+ return false;
+ }
+
+ buf_size -= CONTAINER_HDR_SZ;
+
+ equiv_tbl_len = hdr[2];
+ if (equiv_tbl_len < sizeof(struct equiv_cpu_entry) ||
+ buf_size < equiv_tbl_len) {
+ if (!early)
+ pr_debug("Truncated equivalence table.\n");
+
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Check whether there is a valid, non-truncated microcode patch section at the
+ * beginning of @buf of size @buf_size. Set @early to use this function in the
+ * early path.
+ *
+ * On success, @sh_psize returns the patch size according to the section header,
+ * to the caller.
+ */
+static bool
+__verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize, bool early)
+{
+ u32 p_type, p_size;
+ const u32 *hdr;
+
+ if (buf_size < SECTION_HDR_SIZE) {
+ if (!early)
+ pr_debug("Truncated patch section.\n");
+
+ return false;
+ }
+
+ hdr = (const u32 *)buf;
+ p_type = hdr[0];
+ p_size = hdr[1];
+
+ if (p_type != UCODE_UCODE_TYPE) {
+ if (!early)
+ pr_debug("Invalid type field (0x%x) in container file section header.\n",
+ p_type);
+
+ return false;
+ }
+
+ if (p_size < sizeof(struct microcode_header_amd)) {
+ if (!early)
+ pr_debug("Patch of size %u too short.\n", p_size);
+
+ return false;
+ }
+
+ *sh_psize = p_size;
+
+ return true;
+}
+
+/*
+ * Check whether the passed remaining file @buf_size is large enough to contain
+ * a patch of the indicated @sh_psize (and also whether this size does not
+ * exceed the per-family maximum). @sh_psize is the size read from the section
+ * header.
+ */
+static unsigned int __verify_patch_size(u8 family, u32 sh_psize, size_t buf_size)
+{
+ u32 max_size;
+
+ if (family >= 0x15)
+ return min_t(u32, sh_psize, buf_size);
+
+#define F1XH_MPB_MAX_SIZE 2048
+#define F14H_MPB_MAX_SIZE 1824
+
+ switch (family) {
+ case 0x10 ... 0x12:
+ max_size = F1XH_MPB_MAX_SIZE;
+ break;
+ case 0x14:
+ max_size = F14H_MPB_MAX_SIZE;
+ break;
+ default:
+ WARN(1, "%s: WTF family: 0x%x\n", __func__, family);
+ return 0;
+ break;
+ }
+
+ if (sh_psize > min_t(u32, buf_size, max_size))
+ return 0;
+
+ return sh_psize;
+}
+
+/*
+ * Verify the patch in @buf.
+ *
+ * Returns:
+ * negative: on error
+ * positive: patch is not for this family, skip it
+ * 0: success
+ */
+static int
+verify_patch(u8 family, const u8 *buf, size_t buf_size, u32 *patch_size, bool early)
+{
+ struct microcode_header_amd *mc_hdr;
+ unsigned int ret;
+ u32 sh_psize;
+ u16 proc_id;
+ u8 patch_fam;
+
+ if (!__verify_patch_section(buf, buf_size, &sh_psize, early))
+ return -1;
+
+ /*
+ * The section header length is not included in this indicated size
+ * but is present in the leftover file length so we need to subtract
+ * it before passing this value to the function below.
+ */
+ buf_size -= SECTION_HDR_SIZE;
+
+ /*
+ * Check if the remaining buffer is big enough to contain a patch of
+ * size sh_psize, as the section claims.
+ */
+ if (buf_size < sh_psize) {
+ if (!early)
+ pr_debug("Patch of size %u truncated.\n", sh_psize);
+
+ return -1;
+ }
+
+ ret = __verify_patch_size(family, sh_psize, buf_size);
+ if (!ret) {
+ if (!early)
+ pr_debug("Per-family patch size mismatch.\n");
+ return -1;
+ }
+
+ *patch_size = sh_psize;
+
+ mc_hdr = (struct microcode_header_amd *)(buf + SECTION_HDR_SIZE);
+ if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) {
+ if (!early)
+ pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n", mc_hdr->patch_id);
+ return -1;
+ }
+
+ proc_id = mc_hdr->processor_rev_id;
+ patch_fam = 0xf + (proc_id >> 12);
+ if (patch_fam != family)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * This scans the ucode blob for the proper container as we can have multiple
+ * containers glued together. Returns the equivalence ID from the equivalence
+ * table or 0 if none found.
+ * Returns the amount of bytes consumed while scanning. @desc contains all the
+ * data we're going to use in later stages of the application.
+ */
+static size_t parse_container(u8 *ucode, size_t size, struct cont_desc *desc)
+{
+ struct equiv_cpu_table table;
+ size_t orig_size = size;
+ u32 *hdr = (u32 *)ucode;
+ u16 eq_id;
+ u8 *buf;
+
+ if (!verify_equivalence_table(ucode, size, true))
+ return 0;
+
+ buf = ucode;
+
+ table.entry = (struct equiv_cpu_entry *)(buf + CONTAINER_HDR_SZ);
+ table.num_entries = hdr[2] / sizeof(struct equiv_cpu_entry);
+
+ /*
+ * Find the equivalence ID of our CPU in this table. Even if this table
+ * doesn't contain a patch for the CPU, scan through the whole container
+ * so that it can be skipped in case there are other containers appended.
+ */
+ eq_id = find_equiv_id(&table, desc->cpuid_1_eax);
+
+ buf += hdr[2] + CONTAINER_HDR_SZ;
+ size -= hdr[2] + CONTAINER_HDR_SZ;
+
+ /*
+ * Scan through the rest of the container to find where it ends. We do
+ * some basic sanity-checking too.
+ */
+ while (size > 0) {
+ struct microcode_amd *mc;
+ u32 patch_size;
+ int ret;
+
+ ret = verify_patch(x86_family(desc->cpuid_1_eax), buf, size, &patch_size, true);
+ if (ret < 0) {
+ /*
+ * Patch verification failed, skip to the next
+ * container, if there's one:
+ */
+ goto out;
+ } else if (ret > 0) {
+ goto skip;
+ }
+
+ mc = (struct microcode_amd *)(buf + SECTION_HDR_SIZE);
+ if (eq_id == mc->hdr.processor_rev_id) {
+ desc->psize = patch_size;
+ desc->mc = mc;
+ }
+
+skip:
+ /* Skip patch section header too: */
+ buf += patch_size + SECTION_HDR_SIZE;
+ size -= patch_size + SECTION_HDR_SIZE;
+ }
+
+ /*
+ * If we have found a patch (desc->mc), it means we're looking at the
+ * container which has a patch for this CPU so return 0 to mean, @ucode
+ * already points to the proper container. Otherwise, we return the size
+ * we scanned so that we can advance to the next container in the
+ * buffer.
+ */
+ if (desc->mc) {
+ desc->data = ucode;
+ desc->size = orig_size - size;
+
+ return 0;
+ }
+
+out:
+ return orig_size - size;
+}
+
+/*
+ * Scan the ucode blob for the proper container as we can have multiple
+ * containers glued together.
+ */
+static void scan_containers(u8 *ucode, size_t size, struct cont_desc *desc)
+{
+ while (size) {
+ size_t s = parse_container(ucode, size, desc);
+ if (!s)
+ return;
+
+ /* catch wraparound */
+ if (size >= s) {
+ ucode += s;
+ size -= s;
+ } else {
+ return;
+ }
+ }
+}
+
+static int __apply_microcode_amd(struct microcode_amd *mc)
+{
+ u32 rev, dummy;
+
+ native_wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc->hdr.data_code);
+
+ /* verify patch application was successful */
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+ if (rev != mc->hdr.patch_id)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Early load occurs before we can vmalloc(). So we look for the microcode
+ * patch container file in initrd, traverse equivalent cpu table, look for a
+ * matching microcode patch, and update, all in initrd memory in place.
+ * When vmalloc() is available for use later -- on 64-bit during first AP load,
+ * and on 32-bit during save_microcode_in_initrd_amd() -- we can call
+ * load_microcode_amd() to save equivalent cpu table and microcode patches in
+ * kernel heap memory.
+ *
+ * Returns true if container found (sets @desc), false otherwise.
+ */
+static bool
+apply_microcode_early_amd(u32 cpuid_1_eax, void *ucode, size_t size, bool save_patch)
+{
+ struct cont_desc desc = { 0 };
+ u8 (*patch)[PATCH_MAX_SIZE];
+ struct microcode_amd *mc;
+ u32 rev, dummy, *new_rev;
+ bool ret = false;
+
+#ifdef CONFIG_X86_32
+ new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
+ patch = (u8 (*)[PATCH_MAX_SIZE])__pa_nodebug(&amd_ucode_patch);
+#else
+ new_rev = &ucode_new_rev;
+ patch = &amd_ucode_patch[0];
+#endif
+
+ desc.cpuid_1_eax = cpuid_1_eax;
+
+ scan_containers(ucode, size, &desc);
+
+ mc = desc.mc;
+ if (!mc)
+ return ret;
+
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
+ /*
+ * Allow application of the same revision to pick up SMT-specific
+ * changes even if the revision of the other SMT thread is already
+ * up-to-date.
+ */
+ if (rev > mc->hdr.patch_id)
+ return ret;
+
+ if (!__apply_microcode_amd(mc)) {
+ *new_rev = mc->hdr.patch_id;
+ ret = true;
+
+ if (save_patch)
+ memcpy(patch, mc, min_t(u32, desc.psize, PATCH_MAX_SIZE));
+ }
+
+ return ret;
+}
+
+static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family)
+{
+#ifdef CONFIG_X86_64
+ char fw_name[36] = "amd-ucode/microcode_amd.bin";
+
+ if (family >= 0x15)
+ snprintf(fw_name, sizeof(fw_name),
+ "amd-ucode/microcode_amd_fam%.2xh.bin", family);
+
+ return get_builtin_firmware(cp, fw_name);
+#else
+ return false;
+#endif
+}
+
+static void __load_ucode_amd(unsigned int cpuid_1_eax, struct cpio_data *ret)
+{
+ struct ucode_cpu_info *uci;
+ struct cpio_data cp;
+ const char *path;
+ bool use_pa;
+
+ if (IS_ENABLED(CONFIG_X86_32)) {
+ uci = (struct ucode_cpu_info *)__pa_nodebug(ucode_cpu_info);
+ path = (const char *)__pa_nodebug(ucode_path);
+ use_pa = true;
+ } else {
+ uci = ucode_cpu_info;
+ path = ucode_path;
+ use_pa = false;
+ }
+
+ if (!get_builtin_microcode(&cp, x86_family(cpuid_1_eax)))
+ cp = find_microcode_in_initrd(path, use_pa);
+
+ /* Needed in load_microcode_amd() */
+ uci->cpu_sig.sig = cpuid_1_eax;
+
+ *ret = cp;
+}
+
+void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax)
+{
+ struct cpio_data cp = { };
+
+ __load_ucode_amd(cpuid_1_eax, &cp);
+ if (!(cp.data && cp.size))
+ return;
+
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, true);
+}
+
+void load_ucode_amd_ap(unsigned int cpuid_1_eax)
+{
+ struct microcode_amd *mc;
+ struct cpio_data cp;
+ u32 *new_rev, rev, dummy;
+
+ if (IS_ENABLED(CONFIG_X86_32)) {
+ mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
+ new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
+ } else {
+ mc = (struct microcode_amd *)amd_ucode_patch;
+ new_rev = &ucode_new_rev;
+ }
+
+ native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
+ /*
+ * Check whether a new patch has been saved already. Also, allow application of
+ * the same revision in order to pick up SMT-thread-specific configuration even
+ * if the sibling SMT thread already has an up-to-date revision.
+ */
+ if (*new_rev && rev <= mc->hdr.patch_id) {
+ if (!__apply_microcode_amd(mc)) {
+ *new_rev = mc->hdr.patch_id;
+ return;
+ }
+ }
+
+ __load_ucode_amd(cpuid_1_eax, &cp);
+ if (!(cp.data && cp.size))
+ return;
+
+ apply_microcode_early_amd(cpuid_1_eax, cp.data, cp.size, false);
+}
+
+static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size);
+
+int __init save_microcode_in_initrd_amd(unsigned int cpuid_1_eax)
+{
+ struct cont_desc desc = { 0 };
+ enum ucode_state ret;
+ struct cpio_data cp;
+
+ cp = find_microcode_in_initrd(ucode_path, false);
+ if (!(cp.data && cp.size))
+ return -EINVAL;
+
+ desc.cpuid_1_eax = cpuid_1_eax;
+
+ scan_containers(cp.data, cp.size, &desc);
+ if (!desc.mc)
+ return -EINVAL;
+
+ ret = load_microcode_amd(x86_family(cpuid_1_eax), desc.data, desc.size);
+ if (ret > UCODE_UPDATED)
+ return -EINVAL;
+
+ return 0;
+}
+
+void reload_ucode_amd(unsigned int cpu)
+{
+ u32 rev, dummy;
+ struct microcode_amd *mc;
+
+ mc = (struct microcode_amd *)amd_ucode_patch[cpu_to_node(cpu)];
+
+ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
+ if (rev < mc->hdr.patch_id) {
+ if (!__apply_microcode_amd(mc)) {
+ ucode_new_rev = mc->hdr.patch_id;
+ pr_info("reload patch_level=0x%08x\n", ucode_new_rev);
+ }
+ }
+}
+static u16 __find_equiv_id(unsigned int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ return find_equiv_id(&equiv_table, uci->cpu_sig.sig);
+}
+
+/*
+ * a small, trivial cache of per-family ucode patches
+ */
+static struct ucode_patch *cache_find_patch(u16 equiv_cpu)
+{
+ struct ucode_patch *p;
+
+ list_for_each_entry(p, µcode_cache, plist)
+ if (p->equiv_cpu == equiv_cpu)
+ return p;
+ return NULL;
+}
+
+static void update_cache(struct ucode_patch *new_patch)
+{
+ struct ucode_patch *p;
+
+ list_for_each_entry(p, µcode_cache, plist) {
+ if (p->equiv_cpu == new_patch->equiv_cpu) {
+ if (p->patch_id >= new_patch->patch_id) {
+ /* we already have the latest patch */
+ kfree(new_patch->data);
+ kfree(new_patch);
+ return;
+ }
+
+ list_replace(&p->plist, &new_patch->plist);
+ kfree(p->data);
+ kfree(p);
+ return;
+ }
+ }
+ /* no patch found, add it */
+ list_add_tail(&new_patch->plist, µcode_cache);
+}
+
+static void free_cache(void)
+{
+ struct ucode_patch *p, *tmp;
+
+ list_for_each_entry_safe(p, tmp, µcode_cache, plist) {
+ __list_del(p->plist.prev, p->plist.next);
+ kfree(p->data);
+ kfree(p);
+ }
+}
+
+static struct ucode_patch *find_patch(unsigned int cpu)
+{
+ u16 equiv_id;
+
+ equiv_id = __find_equiv_id(cpu);
+ if (!equiv_id)
+ return NULL;
+
+ return cache_find_patch(equiv_id);
+}
+
+static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct ucode_patch *p;
+
+ csig->sig = cpuid_eax(0x00000001);
+ csig->rev = c->microcode;
+
+ /*
+ * a patch could have been loaded early, set uci->mc so that
+ * mc_bp_resume() can call apply_microcode()
+ */
+ p = find_patch(cpu);
+ if (p && (p->patch_id == csig->rev))
+ uci->mc = p->data;
+
+ pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
+
+ return 0;
+}
+
+static enum ucode_state apply_microcode_amd(int cpu)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ struct microcode_amd *mc_amd;
+ struct ucode_cpu_info *uci;
+ struct ucode_patch *p;
+ enum ucode_state ret;
+ u32 rev, dummy;
+
+ BUG_ON(raw_smp_processor_id() != cpu);
+
+ uci = ucode_cpu_info + cpu;
+
+ p = find_patch(cpu);
+ if (!p)
+ return UCODE_NFOUND;
+
+ mc_amd = p->data;
+ uci->mc = p->data;
+
+ rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
+ /* need to apply patch? */
+ if (rev > mc_amd->hdr.patch_id) {
+ ret = UCODE_OK;
+ goto out;
+ }
+
+ if (__apply_microcode_amd(mc_amd)) {
+ pr_err("CPU%d: update failed for patch_level=0x%08x\n",
+ cpu, mc_amd->hdr.patch_id);
+ return UCODE_ERROR;
+ }
+
+ rev = mc_amd->hdr.patch_id;
+ ret = UCODE_UPDATED;
+
+ pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev);
+
+out:
+ uci->cpu_sig.rev = rev;
+ c->microcode = rev;
+
+ /* Update boot_cpu_data's revision too, if we're on the BSP: */
+ if (c->cpu_index == boot_cpu_data.cpu_index)
+ boot_cpu_data.microcode = rev;
+
+ return ret;
+}
+
+static size_t install_equiv_cpu_table(const u8 *buf, size_t buf_size)
+{
+ u32 equiv_tbl_len;
+ const u32 *hdr;
+
+ if (!verify_equivalence_table(buf, buf_size, false))
+ return 0;
+
+ hdr = (const u32 *)buf;
+ equiv_tbl_len = hdr[2];
+
+ equiv_table.entry = vmalloc(equiv_tbl_len);
+ if (!equiv_table.entry) {
+ pr_err("failed to allocate equivalent CPU table\n");
+ return 0;
+ }
+
+ memcpy(equiv_table.entry, buf + CONTAINER_HDR_SZ, equiv_tbl_len);
+ equiv_table.num_entries = equiv_tbl_len / sizeof(struct equiv_cpu_entry);
+
+ /* add header length */
+ return equiv_tbl_len + CONTAINER_HDR_SZ;
+}
+
+static void free_equiv_cpu_table(void)
+{
+ vfree(equiv_table.entry);
+ memset(&equiv_table, 0, sizeof(equiv_table));
+}
+
+static void cleanup(void)
+{
+ free_equiv_cpu_table();
+ free_cache();
+}
+
+/*
+ * Return a non-negative value even if some of the checks failed so that
+ * we can skip over the next patch. If we return a negative value, we
+ * signal a grave error like a memory allocation has failed and the
+ * driver cannot continue functioning normally. In such cases, we tear
+ * down everything we've used up so far and exit.
+ */
+static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover,
+ unsigned int *patch_size)
+{
+ struct microcode_header_amd *mc_hdr;
+ struct ucode_patch *patch;
+ u16 proc_id;
+ int ret;
+
+ ret = verify_patch(family, fw, leftover, patch_size, false);
+ if (ret)
+ return ret;
+
+ patch = kzalloc(sizeof(*patch), GFP_KERNEL);
+ if (!patch) {
+ pr_err("Patch allocation failure.\n");
+ return -EINVAL;
+ }
+
+ patch->data = kmemdup(fw + SECTION_HDR_SIZE, *patch_size, GFP_KERNEL);
+ if (!patch->data) {
+ pr_err("Patch data allocation failure.\n");
+ kfree(patch);
+ return -EINVAL;
+ }
+ patch->size = *patch_size;
+
+ mc_hdr = (struct microcode_header_amd *)(fw + SECTION_HDR_SIZE);
+ proc_id = mc_hdr->processor_rev_id;
+
+ INIT_LIST_HEAD(&patch->plist);
+ patch->patch_id = mc_hdr->patch_id;
+ patch->equiv_cpu = proc_id;
+
+ pr_debug("%s: Added patch_id: 0x%08x, proc_id: 0x%04x\n",
+ __func__, patch->patch_id, proc_id);
+
+ /* ... and add to cache. */
+ update_cache(patch);
+
+ return 0;
+}
+
+static enum ucode_state __load_microcode_amd(u8 family, const u8 *data,
+ size_t size)
+{
+ u8 *fw = (u8 *)data;
+ size_t offset;
+
+ offset = install_equiv_cpu_table(data, size);
+ if (!offset)
+ return UCODE_ERROR;
+
+ fw += offset;
+ size -= offset;
+
+ if (*(u32 *)fw != UCODE_UCODE_TYPE) {
+ pr_err("invalid type field in container file section header\n");
+ free_equiv_cpu_table();
+ return UCODE_ERROR;
+ }
+
+ while (size > 0) {
+ unsigned int crnt_size = 0;
+ int ret;
+
+ ret = verify_and_add_patch(family, fw, size, &crnt_size);
+ if (ret < 0)
+ return UCODE_ERROR;
+
+ fw += crnt_size + SECTION_HDR_SIZE;
+ size -= (crnt_size + SECTION_HDR_SIZE);
+ }
+
+ return UCODE_OK;
+}
+
+static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size)
+{
+ struct cpuinfo_x86 *c;
+ unsigned int nid, cpu;
+ struct ucode_patch *p;
+ enum ucode_state ret;
+
+ /* free old equiv table */
+ free_equiv_cpu_table();
+
+ ret = __load_microcode_amd(family, data, size);
+ if (ret != UCODE_OK) {
+ cleanup();
+ return ret;
+ }
+
+ for_each_node(nid) {
+ cpu = cpumask_first(cpumask_of_node(nid));
+ c = &cpu_data(cpu);
+
+ p = find_patch(cpu);
+ if (!p)
+ continue;
+
+ if (c->microcode >= p->patch_id)
+ continue;
+
+ ret = UCODE_NEW;
+
+ memset(&amd_ucode_patch[nid], 0, PATCH_MAX_SIZE);
+ memcpy(&amd_ucode_patch[nid], p->data, min_t(u32, p->size, PATCH_MAX_SIZE));
+ }
+
+ return ret;
+}
+
+/*
+ * AMD microcode firmware naming convention, up to family 15h they are in
+ * the legacy file:
+ *
+ * amd-ucode/microcode_amd.bin
+ *
+ * This legacy file is always smaller than 2K in size.
+ *
+ * Beginning with family 15h, they are in family-specific firmware files:
+ *
+ * amd-ucode/microcode_amd_fam15h.bin
+ * amd-ucode/microcode_amd_fam16h.bin
+ * ...
+ *
+ * These might be larger than 2K.
+ */
+static enum ucode_state request_microcode_amd(int cpu, struct device *device,
+ bool refresh_fw)
+{
+ char fw_name[36] = "amd-ucode/microcode_amd.bin";
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ enum ucode_state ret = UCODE_NFOUND;
+ const struct firmware *fw;
+
+ /* reload ucode container only on the boot cpu */
+ if (!refresh_fw)
+ return UCODE_OK;
+
+ if (c->x86 >= 0x15)
+ snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86);
+
+ if (request_firmware_direct(&fw, (const char *)fw_name, device)) {
+ pr_debug("failed to load file %s\n", fw_name);
+ goto out;
+ }
+
+ ret = UCODE_ERROR;
+ if (!verify_container(fw->data, fw->size, false))
+ goto fw_release;
+
+ ret = load_microcode_amd(c->x86, fw->data, fw->size);
+
+ fw_release:
+ release_firmware(fw);
+
+ out:
+ return ret;
+}
+
+static enum ucode_state
+request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ return UCODE_ERROR;
+}
+
+static void microcode_fini_cpu_amd(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ uci->mc = NULL;
+}
+
+static struct microcode_ops microcode_amd_ops = {
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_amd,
+ .collect_cpu_info = collect_cpu_info_amd,
+ .apply_microcode = apply_microcode_amd,
+ .microcode_fini_cpu = microcode_fini_cpu_amd,
+};
+
+struct microcode_ops * __init init_amd_microcode(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+ pr_warn("AMD CPU family 0x%x not supported\n", c->x86);
+ return NULL;
+ }
+
+ if (ucode_new_rev)
+ pr_info_once("microcode updated early to new patch_level=0x%08x\n",
+ ucode_new_rev);
+
+ return µcode_amd_ops;
+}
+
+void __exit exit_amd_microcode(void)
+{
+ cleanup();
+}