ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/dma/xilinx/xilinx_dma.c b/marvell/linux/drivers/dma/xilinx/xilinx_dma.c
new file mode 100644
index 0000000..be44c86
--- /dev/null
+++ b/marvell/linux/drivers/dma/xilinx/xilinx_dma.c
@@ -0,0 +1,2833 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DMA driver for Xilinx Video DMA Engine
+ *
+ * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
+ *
+ * Based on the Freescale DMA driver.
+ *
+ * Description:
+ * The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
+ * core that provides high-bandwidth direct memory access between memory
+ * and AXI4-Stream type video target peripherals. The core provides efficient
+ * two dimensional DMA operations with independent asynchronous read (S2MM)
+ * and write (MM2S) channel operation. It can be configured to have either
+ * one channel or two channels. If configured as two channels, one is to
+ * transmit to the video device (MM2S) and another is to receive from the
+ * video device (S2MM). Initialization, status, interrupt and management
+ * registers are accessed through an AXI4-Lite slave interface.
+ *
+ * The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that
+ * provides high-bandwidth one dimensional direct memory access between memory
+ * and AXI4-Stream target peripherals. It supports one receive and one
+ * transmit channel, both of them optional at synthesis time.
+ *
+ * The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
+ * Access (DMA) between a memory-mapped source address and a memory-mapped
+ * destination address.
+ */
+
+#include <linux/bitops.h>
+#include <linux/dmapool.h>
+#include <linux/dma/xilinx_dma.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_dma.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+
+#include "../dmaengine.h"
+
+/* Register/Descriptor Offsets */
+#define XILINX_DMA_MM2S_CTRL_OFFSET 0x0000
+#define XILINX_DMA_S2MM_CTRL_OFFSET 0x0030
+#define XILINX_VDMA_MM2S_DESC_OFFSET 0x0050
+#define XILINX_VDMA_S2MM_DESC_OFFSET 0x00a0
+
+/* Control Registers */
+#define XILINX_DMA_REG_DMACR 0x0000
+#define XILINX_DMA_DMACR_DELAY_MAX 0xff
+#define XILINX_DMA_DMACR_DELAY_SHIFT 24
+#define XILINX_DMA_DMACR_FRAME_COUNT_MAX 0xff
+#define XILINX_DMA_DMACR_FRAME_COUNT_SHIFT 16
+#define XILINX_DMA_DMACR_ERR_IRQ BIT(14)
+#define XILINX_DMA_DMACR_DLY_CNT_IRQ BIT(13)
+#define XILINX_DMA_DMACR_FRM_CNT_IRQ BIT(12)
+#define XILINX_DMA_DMACR_MASTER_SHIFT 8
+#define XILINX_DMA_DMACR_FSYNCSRC_SHIFT 5
+#define XILINX_DMA_DMACR_FRAMECNT_EN BIT(4)
+#define XILINX_DMA_DMACR_GENLOCK_EN BIT(3)
+#define XILINX_DMA_DMACR_RESET BIT(2)
+#define XILINX_DMA_DMACR_CIRC_EN BIT(1)
+#define XILINX_DMA_DMACR_RUNSTOP BIT(0)
+#define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
+#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24)
+#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16)
+#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8)
+
+#define XILINX_DMA_REG_DMASR 0x0004
+#define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15)
+#define XILINX_DMA_DMASR_ERR_IRQ BIT(14)
+#define XILINX_DMA_DMASR_DLY_CNT_IRQ BIT(13)
+#define XILINX_DMA_DMASR_FRM_CNT_IRQ BIT(12)
+#define XILINX_DMA_DMASR_SOF_LATE_ERR BIT(11)
+#define XILINX_DMA_DMASR_SG_DEC_ERR BIT(10)
+#define XILINX_DMA_DMASR_SG_SLV_ERR BIT(9)
+#define XILINX_DMA_DMASR_EOF_EARLY_ERR BIT(8)
+#define XILINX_DMA_DMASR_SOF_EARLY_ERR BIT(7)
+#define XILINX_DMA_DMASR_DMA_DEC_ERR BIT(6)
+#define XILINX_DMA_DMASR_DMA_SLAVE_ERR BIT(5)
+#define XILINX_DMA_DMASR_DMA_INT_ERR BIT(4)
+#define XILINX_DMA_DMASR_SG_MASK BIT(3)
+#define XILINX_DMA_DMASR_IDLE BIT(1)
+#define XILINX_DMA_DMASR_HALTED BIT(0)
+#define XILINX_DMA_DMASR_DELAY_MASK GENMASK(31, 24)
+#define XILINX_DMA_DMASR_FRAME_COUNT_MASK GENMASK(23, 16)
+
+#define XILINX_DMA_REG_CURDESC 0x0008
+#define XILINX_DMA_REG_TAILDESC 0x0010
+#define XILINX_DMA_REG_REG_INDEX 0x0014
+#define XILINX_DMA_REG_FRMSTORE 0x0018
+#define XILINX_DMA_REG_THRESHOLD 0x001c
+#define XILINX_DMA_REG_FRMPTR_STS 0x0024
+#define XILINX_DMA_REG_PARK_PTR 0x0028
+#define XILINX_DMA_PARK_PTR_WR_REF_SHIFT 8
+#define XILINX_DMA_PARK_PTR_WR_REF_MASK GENMASK(12, 8)
+#define XILINX_DMA_PARK_PTR_RD_REF_SHIFT 0
+#define XILINX_DMA_PARK_PTR_RD_REF_MASK GENMASK(4, 0)
+#define XILINX_DMA_REG_VDMA_VERSION 0x002c
+
+/* Register Direct Mode Registers */
+#define XILINX_DMA_REG_VSIZE 0x0000
+#define XILINX_DMA_REG_HSIZE 0x0004
+
+#define XILINX_DMA_REG_FRMDLY_STRIDE 0x0008
+#define XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT 24
+#define XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT 0
+
+#define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n))
+#define XILINX_VDMA_REG_START_ADDRESS_64(n) (0x000c + 8 * (n))
+
+#define XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP 0x00ec
+#define XILINX_VDMA_ENABLE_VERTICAL_FLIP BIT(0)
+
+/* HW specific definitions */
+#define XILINX_DMA_MAX_CHANS_PER_DEVICE 0x20
+
+#define XILINX_DMA_DMAXR_ALL_IRQ_MASK \
+ (XILINX_DMA_DMASR_FRM_CNT_IRQ | \
+ XILINX_DMA_DMASR_DLY_CNT_IRQ | \
+ XILINX_DMA_DMASR_ERR_IRQ)
+
+#define XILINX_DMA_DMASR_ALL_ERR_MASK \
+ (XILINX_DMA_DMASR_EOL_LATE_ERR | \
+ XILINX_DMA_DMASR_SOF_LATE_ERR | \
+ XILINX_DMA_DMASR_SG_DEC_ERR | \
+ XILINX_DMA_DMASR_SG_SLV_ERR | \
+ XILINX_DMA_DMASR_EOF_EARLY_ERR | \
+ XILINX_DMA_DMASR_SOF_EARLY_ERR | \
+ XILINX_DMA_DMASR_DMA_DEC_ERR | \
+ XILINX_DMA_DMASR_DMA_SLAVE_ERR | \
+ XILINX_DMA_DMASR_DMA_INT_ERR)
+
+/*
+ * Recoverable errors are DMA Internal error, SOF Early, EOF Early
+ * and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
+ * is enabled in the h/w system.
+ */
+#define XILINX_DMA_DMASR_ERR_RECOVER_MASK \
+ (XILINX_DMA_DMASR_SOF_LATE_ERR | \
+ XILINX_DMA_DMASR_EOF_EARLY_ERR | \
+ XILINX_DMA_DMASR_SOF_EARLY_ERR | \
+ XILINX_DMA_DMASR_DMA_INT_ERR)
+
+/* Axi VDMA Flush on Fsync bits */
+#define XILINX_DMA_FLUSH_S2MM 3
+#define XILINX_DMA_FLUSH_MM2S 2
+#define XILINX_DMA_FLUSH_BOTH 1
+
+/* Delay loop counter to prevent hardware failure */
+#define XILINX_DMA_LOOP_COUNT 1000000
+
+/* AXI DMA Specific Registers/Offsets */
+#define XILINX_DMA_REG_SRCDSTADDR 0x18
+#define XILINX_DMA_REG_BTT 0x28
+
+/* AXI DMA Specific Masks/Bit fields */
+#define XILINX_DMA_MAX_TRANS_LEN_MIN 8
+#define XILINX_DMA_MAX_TRANS_LEN_MAX 23
+#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
+#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
+#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
+#define XILINX_DMA_CR_COALESCE_SHIFT 16
+#define XILINX_DMA_BD_SOP BIT(27)
+#define XILINX_DMA_BD_EOP BIT(26)
+#define XILINX_DMA_COALESCE_MAX 255
+#define XILINX_DMA_NUM_DESCS 255
+#define XILINX_DMA_NUM_APP_WORDS 5
+
+/* Multi-Channel DMA Descriptor offsets*/
+#define XILINX_DMA_MCRX_CDESC(x) (0x40 + (x-1) * 0x20)
+#define XILINX_DMA_MCRX_TDESC(x) (0x48 + (x-1) * 0x20)
+
+/* Multi-Channel DMA Masks/Shifts */
+#define XILINX_DMA_BD_HSIZE_MASK GENMASK(15, 0)
+#define XILINX_DMA_BD_STRIDE_MASK GENMASK(15, 0)
+#define XILINX_DMA_BD_VSIZE_MASK GENMASK(31, 19)
+#define XILINX_DMA_BD_TDEST_MASK GENMASK(4, 0)
+#define XILINX_DMA_BD_STRIDE_SHIFT 0
+#define XILINX_DMA_BD_VSIZE_SHIFT 19
+
+/* AXI CDMA Specific Registers/Offsets */
+#define XILINX_CDMA_REG_SRCADDR 0x18
+#define XILINX_CDMA_REG_DSTADDR 0x20
+
+/* AXI CDMA Specific Masks */
+#define XILINX_CDMA_CR_SGMODE BIT(3)
+
+#define xilinx_prep_dma_addr_t(addr) \
+ ((dma_addr_t)((u64)addr##_##msb << 32 | (addr)))
+/**
+ * struct xilinx_vdma_desc_hw - Hardware Descriptor
+ * @next_desc: Next Descriptor Pointer @0x00
+ * @pad1: Reserved @0x04
+ * @buf_addr: Buffer address @0x08
+ * @buf_addr_msb: MSB of Buffer address @0x0C
+ * @vsize: Vertical Size @0x10
+ * @hsize: Horizontal Size @0x14
+ * @stride: Number of bytes between the first
+ * pixels of each horizontal line @0x18
+ */
+struct xilinx_vdma_desc_hw {
+ u32 next_desc;
+ u32 pad1;
+ u32 buf_addr;
+ u32 buf_addr_msb;
+ u32 vsize;
+ u32 hsize;
+ u32 stride;
+} __aligned(64);
+
+/**
+ * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
+ * @next_desc: Next Descriptor Pointer @0x00
+ * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
+ * @buf_addr: Buffer address @0x08
+ * @buf_addr_msb: MSB of Buffer address @0x0C
+ * @mcdma_control: Control field for mcdma @0x10
+ * @vsize_stride: Vsize and Stride field for mcdma @0x14
+ * @control: Control field @0x18
+ * @status: Status field @0x1C
+ * @app: APP Fields @0x20 - 0x30
+ */
+struct xilinx_axidma_desc_hw {
+ u32 next_desc;
+ u32 next_desc_msb;
+ u32 buf_addr;
+ u32 buf_addr_msb;
+ u32 mcdma_control;
+ u32 vsize_stride;
+ u32 control;
+ u32 status;
+ u32 app[XILINX_DMA_NUM_APP_WORDS];
+} __aligned(64);
+
+/**
+ * struct xilinx_cdma_desc_hw - Hardware Descriptor
+ * @next_desc: Next Descriptor Pointer @0x00
+ * @next_desc_msb: Next Descriptor Pointer MSB @0x04
+ * @src_addr: Source address @0x08
+ * @src_addr_msb: Source address MSB @0x0C
+ * @dest_addr: Destination address @0x10
+ * @dest_addr_msb: Destination address MSB @0x14
+ * @control: Control field @0x18
+ * @status: Status field @0x1C
+ */
+struct xilinx_cdma_desc_hw {
+ u32 next_desc;
+ u32 next_desc_msb;
+ u32 src_addr;
+ u32 src_addr_msb;
+ u32 dest_addr;
+ u32 dest_addr_msb;
+ u32 control;
+ u32 status;
+} __aligned(64);
+
+/**
+ * struct xilinx_vdma_tx_segment - Descriptor segment
+ * @hw: Hardware descriptor
+ * @node: Node in the descriptor segments list
+ * @phys: Physical address of segment
+ */
+struct xilinx_vdma_tx_segment {
+ struct xilinx_vdma_desc_hw hw;
+ struct list_head node;
+ dma_addr_t phys;
+} __aligned(64);
+
+/**
+ * struct xilinx_axidma_tx_segment - Descriptor segment
+ * @hw: Hardware descriptor
+ * @node: Node in the descriptor segments list
+ * @phys: Physical address of segment
+ */
+struct xilinx_axidma_tx_segment {
+ struct xilinx_axidma_desc_hw hw;
+ struct list_head node;
+ dma_addr_t phys;
+} __aligned(64);
+
+/**
+ * struct xilinx_cdma_tx_segment - Descriptor segment
+ * @hw: Hardware descriptor
+ * @node: Node in the descriptor segments list
+ * @phys: Physical address of segment
+ */
+struct xilinx_cdma_tx_segment {
+ struct xilinx_cdma_desc_hw hw;
+ struct list_head node;
+ dma_addr_t phys;
+} __aligned(64);
+
+/**
+ * struct xilinx_dma_tx_descriptor - Per Transaction structure
+ * @async_tx: Async transaction descriptor
+ * @segments: TX segments list
+ * @node: Node in the channel descriptors list
+ * @cyclic: Check for cyclic transfers.
+ */
+struct xilinx_dma_tx_descriptor {
+ struct dma_async_tx_descriptor async_tx;
+ struct list_head segments;
+ struct list_head node;
+ bool cyclic;
+};
+
+/**
+ * struct xilinx_dma_chan - Driver specific DMA channel structure
+ * @xdev: Driver specific device structure
+ * @ctrl_offset: Control registers offset
+ * @desc_offset: TX descriptor registers offset
+ * @lock: Descriptor operation lock
+ * @pending_list: Descriptors waiting
+ * @active_list: Descriptors ready to submit
+ * @done_list: Complete descriptors
+ * @free_seg_list: Free descriptors
+ * @common: DMA common channel
+ * @desc_pool: Descriptors pool
+ * @dev: The dma device
+ * @irq: Channel IRQ
+ * @id: Channel ID
+ * @direction: Transfer direction
+ * @num_frms: Number of frames
+ * @has_sg: Support scatter transfers
+ * @cyclic: Check for cyclic transfers.
+ * @genlock: Support genlock mode
+ * @err: Channel has errors
+ * @idle: Check for channel idle
+ * @terminating: Check for channel being synchronized by user
+ * @tasklet: Cleanup work after irq
+ * @config: Device configuration info
+ * @flush_on_fsync: Flush on Frame sync
+ * @desc_pendingcount: Descriptor pending count
+ * @ext_addr: Indicates 64 bit addressing is supported by dma channel
+ * @desc_submitcount: Descriptor h/w submitted count
+ * @residue: Residue for AXI DMA
+ * @seg_v: Statically allocated segments base
+ * @seg_p: Physical allocated segments base
+ * @cyclic_seg_v: Statically allocated segment base for cyclic transfers
+ * @cyclic_seg_p: Physical allocated segments base for cyclic dma
+ * @start_transfer: Differentiate b/w DMA IP's transfer
+ * @stop_transfer: Differentiate b/w DMA IP's quiesce
+ * @tdest: TDEST value for mcdma
+ * @has_vflip: S2MM vertical flip
+ */
+struct xilinx_dma_chan {
+ struct xilinx_dma_device *xdev;
+ u32 ctrl_offset;
+ u32 desc_offset;
+ spinlock_t lock;
+ struct list_head pending_list;
+ struct list_head active_list;
+ struct list_head done_list;
+ struct list_head free_seg_list;
+ struct dma_chan common;
+ struct dma_pool *desc_pool;
+ struct device *dev;
+ int irq;
+ int id;
+ enum dma_transfer_direction direction;
+ int num_frms;
+ bool has_sg;
+ bool cyclic;
+ bool genlock;
+ bool err;
+ bool idle;
+ bool terminating;
+ struct tasklet_struct tasklet;
+ struct xilinx_vdma_config config;
+ bool flush_on_fsync;
+ u32 desc_pendingcount;
+ bool ext_addr;
+ u32 desc_submitcount;
+ u32 residue;
+ struct xilinx_axidma_tx_segment *seg_v;
+ dma_addr_t seg_p;
+ struct xilinx_axidma_tx_segment *cyclic_seg_v;
+ dma_addr_t cyclic_seg_p;
+ void (*start_transfer)(struct xilinx_dma_chan *chan);
+ int (*stop_transfer)(struct xilinx_dma_chan *chan);
+ u16 tdest;
+ bool has_vflip;
+};
+
+/**
+ * enum xdma_ip_type - DMA IP type.
+ *
+ * @XDMA_TYPE_AXIDMA: Axi dma ip.
+ * @XDMA_TYPE_CDMA: Axi cdma ip.
+ * @XDMA_TYPE_VDMA: Axi vdma ip.
+ *
+ */
+enum xdma_ip_type {
+ XDMA_TYPE_AXIDMA = 0,
+ XDMA_TYPE_CDMA,
+ XDMA_TYPE_VDMA,
+};
+
+struct xilinx_dma_config {
+ enum xdma_ip_type dmatype;
+ int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
+ struct clk **tx_clk, struct clk **txs_clk,
+ struct clk **rx_clk, struct clk **rxs_clk);
+};
+
+/**
+ * struct xilinx_dma_device - DMA device structure
+ * @regs: I/O mapped base address
+ * @dev: Device Structure
+ * @common: DMA device structure
+ * @chan: Driver specific DMA channel
+ * @mcdma: Specifies whether Multi-Channel is present or not
+ * @flush_on_fsync: Flush on frame sync
+ * @ext_addr: Indicates 64 bit addressing is supported by dma device
+ * @pdev: Platform device structure pointer
+ * @dma_config: DMA config structure
+ * @axi_clk: DMA Axi4-lite interace clock
+ * @tx_clk: DMA mm2s clock
+ * @txs_clk: DMA mm2s stream clock
+ * @rx_clk: DMA s2mm clock
+ * @rxs_clk: DMA s2mm stream clock
+ * @nr_channels: Number of channels DMA device supports
+ * @chan_id: DMA channel identifier
+ * @max_buffer_len: Max buffer length
+ */
+struct xilinx_dma_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct xilinx_dma_chan *chan[XILINX_DMA_MAX_CHANS_PER_DEVICE];
+ bool mcdma;
+ u32 flush_on_fsync;
+ bool ext_addr;
+ struct platform_device *pdev;
+ const struct xilinx_dma_config *dma_config;
+ struct clk *axi_clk;
+ struct clk *tx_clk;
+ struct clk *txs_clk;
+ struct clk *rx_clk;
+ struct clk *rxs_clk;
+ u32 nr_channels;
+ u32 chan_id;
+ u32 max_buffer_len;
+};
+
+/* Macros */
+#define to_xilinx_chan(chan) \
+ container_of(chan, struct xilinx_dma_chan, common)
+#define to_dma_tx_descriptor(tx) \
+ container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
+#define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
+ readl_poll_timeout_atomic(chan->xdev->regs + chan->ctrl_offset + reg, \
+ val, cond, delay_us, timeout_us)
+
+/* IO accessors */
+static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
+{
+ return ioread32(chan->xdev->regs + reg);
+}
+
+static inline void dma_write(struct xilinx_dma_chan *chan, u32 reg, u32 value)
+{
+ iowrite32(value, chan->xdev->regs + reg);
+}
+
+static inline void vdma_desc_write(struct xilinx_dma_chan *chan, u32 reg,
+ u32 value)
+{
+ dma_write(chan, chan->desc_offset + reg, value);
+}
+
+static inline u32 dma_ctrl_read(struct xilinx_dma_chan *chan, u32 reg)
+{
+ return dma_read(chan, chan->ctrl_offset + reg);
+}
+
+static inline void dma_ctrl_write(struct xilinx_dma_chan *chan, u32 reg,
+ u32 value)
+{
+ dma_write(chan, chan->ctrl_offset + reg, value);
+}
+
+static inline void dma_ctrl_clr(struct xilinx_dma_chan *chan, u32 reg,
+ u32 clr)
+{
+ dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) & ~clr);
+}
+
+static inline void dma_ctrl_set(struct xilinx_dma_chan *chan, u32 reg,
+ u32 set)
+{
+ dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) | set);
+}
+
+/**
+ * vdma_desc_write_64 - 64-bit descriptor write
+ * @chan: Driver specific VDMA channel
+ * @reg: Register to write
+ * @value_lsb: lower address of the descriptor.
+ * @value_msb: upper address of the descriptor.
+ *
+ * Since vdma driver is trying to write to a register offset which is not a
+ * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits
+ * instead of a single 64 bit register write.
+ */
+static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
+ u32 value_lsb, u32 value_msb)
+{
+ /* Write the lsb 32 bits*/
+ writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg);
+
+ /* Write the msb 32 bits */
+ writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
+}
+
+static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
+{
+ lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
+}
+
+static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
+ dma_addr_t addr)
+{
+ if (chan->ext_addr)
+ dma_writeq(chan, reg, addr);
+ else
+ dma_ctrl_write(chan, reg, addr);
+}
+
+static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
+ struct xilinx_axidma_desc_hw *hw,
+ dma_addr_t buf_addr, size_t sg_used,
+ size_t period_len)
+{
+ if (chan->ext_addr) {
+ hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
+ hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
+ period_len);
+ } else {
+ hw->buf_addr = buf_addr + sg_used + period_len;
+ }
+}
+
+/* -----------------------------------------------------------------------------
+ * Descriptors and segments alloc and free
+ */
+
+/**
+ * xilinx_vdma_alloc_tx_segment - Allocate transaction segment
+ * @chan: Driver specific DMA channel
+ *
+ * Return: The allocated segment on success and NULL on failure.
+ */
+static struct xilinx_vdma_tx_segment *
+xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_vdma_tx_segment *segment;
+ dma_addr_t phys;
+
+ segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
+ if (!segment)
+ return NULL;
+
+ segment->phys = phys;
+
+ return segment;
+}
+
+/**
+ * xilinx_cdma_alloc_tx_segment - Allocate transaction segment
+ * @chan: Driver specific DMA channel
+ *
+ * Return: The allocated segment on success and NULL on failure.
+ */
+static struct xilinx_cdma_tx_segment *
+xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_cdma_tx_segment *segment;
+ dma_addr_t phys;
+
+ segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
+ if (!segment)
+ return NULL;
+
+ segment->phys = phys;
+
+ return segment;
+}
+
+/**
+ * xilinx_axidma_alloc_tx_segment - Allocate transaction segment
+ * @chan: Driver specific DMA channel
+ *
+ * Return: The allocated segment on success and NULL on failure.
+ */
+static struct xilinx_axidma_tx_segment *
+xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_axidma_tx_segment *segment = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ if (!list_empty(&chan->free_seg_list)) {
+ segment = list_first_entry(&chan->free_seg_list,
+ struct xilinx_axidma_tx_segment,
+ node);
+ list_del(&segment->node);
+ }
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ return segment;
+}
+
+static void xilinx_dma_clean_hw_desc(struct xilinx_axidma_desc_hw *hw)
+{
+ u32 next_desc = hw->next_desc;
+ u32 next_desc_msb = hw->next_desc_msb;
+
+ memset(hw, 0, sizeof(struct xilinx_axidma_desc_hw));
+
+ hw->next_desc = next_desc;
+ hw->next_desc_msb = next_desc_msb;
+}
+
+/**
+ * xilinx_dma_free_tx_segment - Free transaction segment
+ * @chan: Driver specific DMA channel
+ * @segment: DMA transaction segment
+ */
+static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan,
+ struct xilinx_axidma_tx_segment *segment)
+{
+ xilinx_dma_clean_hw_desc(&segment->hw);
+
+ list_add_tail(&segment->node, &chan->free_seg_list);
+}
+
+/**
+ * xilinx_cdma_free_tx_segment - Free transaction segment
+ * @chan: Driver specific DMA channel
+ * @segment: DMA transaction segment
+ */
+static void xilinx_cdma_free_tx_segment(struct xilinx_dma_chan *chan,
+ struct xilinx_cdma_tx_segment *segment)
+{
+ dma_pool_free(chan->desc_pool, segment, segment->phys);
+}
+
+/**
+ * xilinx_vdma_free_tx_segment - Free transaction segment
+ * @chan: Driver specific DMA channel
+ * @segment: DMA transaction segment
+ */
+static void xilinx_vdma_free_tx_segment(struct xilinx_dma_chan *chan,
+ struct xilinx_vdma_tx_segment *segment)
+{
+ dma_pool_free(chan->desc_pool, segment, segment->phys);
+}
+
+/**
+ * xilinx_dma_tx_descriptor - Allocate transaction descriptor
+ * @chan: Driver specific DMA channel
+ *
+ * Return: The allocated descriptor on success and NULL on failure.
+ */
+static struct xilinx_dma_tx_descriptor *
+xilinx_dma_alloc_tx_descriptor(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_dma_tx_descriptor *desc;
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return NULL;
+
+ INIT_LIST_HEAD(&desc->segments);
+
+ return desc;
+}
+
+/**
+ * xilinx_dma_free_tx_descriptor - Free transaction descriptor
+ * @chan: Driver specific DMA channel
+ * @desc: DMA transaction descriptor
+ */
+static void
+xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
+ struct xilinx_dma_tx_descriptor *desc)
+{
+ struct xilinx_vdma_tx_segment *segment, *next;
+ struct xilinx_cdma_tx_segment *cdma_segment, *cdma_next;
+ struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next;
+
+ if (!desc)
+ return;
+
+ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
+ list_for_each_entry_safe(segment, next, &desc->segments, node) {
+ list_del(&segment->node);
+ xilinx_vdma_free_tx_segment(chan, segment);
+ }
+ } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
+ list_for_each_entry_safe(cdma_segment, cdma_next,
+ &desc->segments, node) {
+ list_del(&cdma_segment->node);
+ xilinx_cdma_free_tx_segment(chan, cdma_segment);
+ }
+ } else {
+ list_for_each_entry_safe(axidma_segment, axidma_next,
+ &desc->segments, node) {
+ list_del(&axidma_segment->node);
+ xilinx_dma_free_tx_segment(chan, axidma_segment);
+ }
+ }
+
+ kfree(desc);
+}
+
+/* Required functions */
+
+/**
+ * xilinx_dma_free_desc_list - Free descriptors list
+ * @chan: Driver specific DMA channel
+ * @list: List to parse and delete the descriptor
+ */
+static void xilinx_dma_free_desc_list(struct xilinx_dma_chan *chan,
+ struct list_head *list)
+{
+ struct xilinx_dma_tx_descriptor *desc, *next;
+
+ list_for_each_entry_safe(desc, next, list, node) {
+ list_del(&desc->node);
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ }
+}
+
+/**
+ * xilinx_dma_free_descriptors - Free channel descriptors
+ * @chan: Driver specific DMA channel
+ */
+static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+
+ xilinx_dma_free_desc_list(chan, &chan->pending_list);
+ xilinx_dma_free_desc_list(chan, &chan->done_list);
+ xilinx_dma_free_desc_list(chan, &chan->active_list);
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+/**
+ * xilinx_dma_free_chan_resources - Free channel resources
+ * @dchan: DMA channel
+ */
+static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ unsigned long flags;
+
+ dev_dbg(chan->dev, "Free all channel resources.\n");
+
+ xilinx_dma_free_descriptors(chan);
+
+ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ spin_lock_irqsave(&chan->lock, flags);
+ INIT_LIST_HEAD(&chan->free_seg_list);
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ /* Free memory that is allocated for BD */
+ dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
+ XILINX_DMA_NUM_DESCS, chan->seg_v,
+ chan->seg_p);
+
+ /* Free Memory that is allocated for cyclic DMA Mode */
+ dma_free_coherent(chan->dev, sizeof(*chan->cyclic_seg_v),
+ chan->cyclic_seg_v, chan->cyclic_seg_p);
+ }
+
+ if (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA) {
+ dma_pool_destroy(chan->desc_pool);
+ chan->desc_pool = NULL;
+ }
+}
+
+/**
+ * xilinx_dma_chan_handle_cyclic - Cyclic dma callback
+ * @chan: Driver specific dma channel
+ * @desc: dma transaction descriptor
+ * @flags: flags for spin lock
+ */
+static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
+ struct xilinx_dma_tx_descriptor *desc,
+ unsigned long *flags)
+{
+ dma_async_tx_callback callback;
+ void *callback_param;
+
+ callback = desc->async_tx.callback;
+ callback_param = desc->async_tx.callback_param;
+ if (callback) {
+ spin_unlock_irqrestore(&chan->lock, *flags);
+ callback(callback_param);
+ spin_lock_irqsave(&chan->lock, *flags);
+ }
+}
+
+/**
+ * xilinx_dma_chan_desc_cleanup - Clean channel descriptors
+ * @chan: Driver specific DMA channel
+ */
+static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_dma_tx_descriptor *desc, *next;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+
+ list_for_each_entry_safe(desc, next, &chan->done_list, node) {
+ struct dmaengine_desc_callback cb;
+
+ if (desc->cyclic) {
+ xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
+ break;
+ }
+
+ /* Remove from the list of running transactions */
+ list_del(&desc->node);
+
+ /* Run the link descriptor callback function */
+ dmaengine_desc_get_callback(&desc->async_tx, &cb);
+ if (dmaengine_desc_callback_valid(&cb)) {
+ spin_unlock_irqrestore(&chan->lock, flags);
+ dmaengine_desc_callback_invoke(&cb, NULL);
+ spin_lock_irqsave(&chan->lock, flags);
+ }
+
+ /* Run any dependencies, then free the descriptor */
+ dma_run_dependencies(&desc->async_tx);
+ xilinx_dma_free_tx_descriptor(chan, desc);
+
+ /*
+ * While we ran a callback the user called a terminate function,
+ * which takes care of cleaning up any remaining descriptors
+ */
+ if (chan->terminating)
+ break;
+ }
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+/**
+ * xilinx_dma_do_tasklet - Schedule completion tasklet
+ * @data: Pointer to the Xilinx DMA channel structure
+ */
+static void xilinx_dma_do_tasklet(unsigned long data)
+{
+ struct xilinx_dma_chan *chan = (struct xilinx_dma_chan *)data;
+
+ xilinx_dma_chan_desc_cleanup(chan);
+}
+
+/**
+ * xilinx_dma_alloc_chan_resources - Allocate channel resources
+ * @dchan: DMA channel
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ int i;
+
+ /* Has this channel already been allocated? */
+ if (chan->desc_pool)
+ return 0;
+
+ /*
+ * We need the descriptor to be aligned to 64bytes
+ * for meeting Xilinx VDMA specification requirement.
+ */
+ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ /* Allocate the buffer descriptors. */
+ chan->seg_v = dma_alloc_coherent(chan->dev,
+ sizeof(*chan->seg_v) * XILINX_DMA_NUM_DESCS,
+ &chan->seg_p, GFP_KERNEL);
+ if (!chan->seg_v) {
+ dev_err(chan->dev,
+ "unable to allocate channel %d descriptors\n",
+ chan->id);
+ return -ENOMEM;
+ }
+ /*
+ * For cyclic DMA mode we need to program the tail Descriptor
+ * register with a value which is not a part of the BD chain
+ * so allocating a desc segment during channel allocation for
+ * programming tail descriptor.
+ */
+ chan->cyclic_seg_v = dma_alloc_coherent(chan->dev,
+ sizeof(*chan->cyclic_seg_v),
+ &chan->cyclic_seg_p,
+ GFP_KERNEL);
+ if (!chan->cyclic_seg_v) {
+ dev_err(chan->dev,
+ "unable to allocate desc segment for cyclic DMA\n");
+ dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
+ XILINX_DMA_NUM_DESCS, chan->seg_v,
+ chan->seg_p);
+ return -ENOMEM;
+ }
+ chan->cyclic_seg_v->phys = chan->cyclic_seg_p;
+
+ for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
+ chan->seg_v[i].hw.next_desc =
+ lower_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
+ ((i + 1) % XILINX_DMA_NUM_DESCS));
+ chan->seg_v[i].hw.next_desc_msb =
+ upper_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
+ ((i + 1) % XILINX_DMA_NUM_DESCS));
+ chan->seg_v[i].phys = chan->seg_p +
+ sizeof(*chan->seg_v) * i;
+ list_add_tail(&chan->seg_v[i].node,
+ &chan->free_seg_list);
+ }
+ } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
+ chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
+ chan->dev,
+ sizeof(struct xilinx_cdma_tx_segment),
+ __alignof__(struct xilinx_cdma_tx_segment),
+ 0);
+ } else {
+ chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
+ chan->dev,
+ sizeof(struct xilinx_vdma_tx_segment),
+ __alignof__(struct xilinx_vdma_tx_segment),
+ 0);
+ }
+
+ if (!chan->desc_pool &&
+ (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA)) {
+ dev_err(chan->dev,
+ "unable to allocate channel %d descriptor pool\n",
+ chan->id);
+ return -ENOMEM;
+ }
+
+ dma_cookie_init(dchan);
+
+ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ /* For AXI DMA resetting once channel will reset the
+ * other channel as well so enable the interrupts here.
+ */
+ dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
+ XILINX_DMA_DMAXR_ALL_IRQ_MASK);
+ }
+
+ if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
+ dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
+ XILINX_CDMA_CR_SGMODE);
+
+ return 0;
+}
+
+/**
+ * xilinx_dma_calc_copysize - Calculate the amount of data to copy
+ * @chan: Driver specific DMA channel
+ * @size: Total data that needs to be copied
+ * @done: Amount of data that has been already copied
+ *
+ * Return: Amount of data that has to be copied
+ */
+static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
+ int size, int done)
+{
+ size_t copy;
+
+ copy = min_t(size_t, size - done,
+ chan->xdev->max_buffer_len);
+
+ if ((copy + done < size) &&
+ chan->xdev->common.copy_align) {
+ /*
+ * If this is not the last descriptor, make sure
+ * the next one will be properly aligned
+ */
+ copy = rounddown(copy,
+ (1 << chan->xdev->common.copy_align));
+ }
+ return copy;
+}
+
+/**
+ * xilinx_dma_tx_status - Get DMA transaction status
+ * @dchan: DMA channel
+ * @cookie: Transaction identifier
+ * @txstate: Transaction state
+ *
+ * Return: DMA transaction status
+ */
+static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ struct xilinx_dma_tx_descriptor *desc;
+ struct xilinx_axidma_tx_segment *segment;
+ struct xilinx_axidma_desc_hw *hw;
+ enum dma_status ret;
+ unsigned long flags;
+ u32 residue = 0;
+
+ ret = dma_cookie_status(dchan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ spin_lock_irqsave(&chan->lock, flags);
+
+ desc = list_last_entry(&chan->active_list,
+ struct xilinx_dma_tx_descriptor, node);
+ if (chan->has_sg) {
+ list_for_each_entry(segment, &desc->segments, node) {
+ hw = &segment->hw;
+ residue += (hw->control - hw->status) &
+ chan->xdev->max_buffer_len;
+ }
+ }
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ chan->residue = residue;
+ dma_set_residue(txstate, chan->residue);
+ }
+
+ return ret;
+}
+
+/**
+ * xilinx_dma_stop_transfer - Halt DMA channel
+ * @chan: Driver specific DMA channel
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
+{
+ u32 val;
+
+ dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
+
+ /* Wait for the hardware to halt */
+ return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ val & XILINX_DMA_DMASR_HALTED, 0,
+ XILINX_DMA_LOOP_COUNT);
+}
+
+/**
+ * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
+ * @chan: Driver specific DMA channel
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
+{
+ u32 val;
+
+ return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ val & XILINX_DMA_DMASR_IDLE, 0,
+ XILINX_DMA_LOOP_COUNT);
+}
+
+/**
+ * xilinx_dma_start - Start DMA channel
+ * @chan: Driver specific DMA channel
+ */
+static void xilinx_dma_start(struct xilinx_dma_chan *chan)
+{
+ int err;
+ u32 val;
+
+ dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
+
+ /* Wait for the hardware to start */
+ err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ !(val & XILINX_DMA_DMASR_HALTED), 0,
+ XILINX_DMA_LOOP_COUNT);
+
+ if (err) {
+ dev_err(chan->dev, "Cannot start channel %p: %x\n",
+ chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
+
+ chan->err = true;
+ }
+}
+
+/**
+ * xilinx_vdma_start_transfer - Starts VDMA transfer
+ * @chan: Driver specific channel struct pointer
+ */
+static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_vdma_config *config = &chan->config;
+ struct xilinx_dma_tx_descriptor *desc;
+ u32 reg, j;
+ struct xilinx_vdma_tx_segment *segment, *last = NULL;
+ int i = 0;
+
+ /* This function was invoked with lock held */
+ if (chan->err)
+ return;
+
+ if (!chan->idle)
+ return;
+
+ if (list_empty(&chan->pending_list))
+ return;
+
+ desc = list_first_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor, node);
+
+ /* Configure the hardware using info in the config structure */
+ if (chan->has_vflip) {
+ reg = dma_read(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
+ reg &= ~XILINX_VDMA_ENABLE_VERTICAL_FLIP;
+ reg |= config->vflip_en;
+ dma_write(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP,
+ reg);
+ }
+
+ reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+
+ if (config->frm_cnt_en)
+ reg |= XILINX_DMA_DMACR_FRAMECNT_EN;
+ else
+ reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
+
+ /* If not parking, enable circular mode */
+ if (config->park)
+ reg &= ~XILINX_DMA_DMACR_CIRC_EN;
+ else
+ reg |= XILINX_DMA_DMACR_CIRC_EN;
+
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
+
+ j = chan->desc_submitcount;
+ reg = dma_read(chan, XILINX_DMA_REG_PARK_PTR);
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ reg &= ~XILINX_DMA_PARK_PTR_RD_REF_MASK;
+ reg |= j << XILINX_DMA_PARK_PTR_RD_REF_SHIFT;
+ } else {
+ reg &= ~XILINX_DMA_PARK_PTR_WR_REF_MASK;
+ reg |= j << XILINX_DMA_PARK_PTR_WR_REF_SHIFT;
+ }
+ dma_write(chan, XILINX_DMA_REG_PARK_PTR, reg);
+
+ /* Start the hardware */
+ xilinx_dma_start(chan);
+
+ if (chan->err)
+ return;
+
+ /* Start the transfer */
+ if (chan->desc_submitcount < chan->num_frms)
+ i = chan->desc_submitcount;
+
+ list_for_each_entry(segment, &desc->segments, node) {
+ if (chan->ext_addr)
+ vdma_desc_write_64(chan,
+ XILINX_VDMA_REG_START_ADDRESS_64(i++),
+ segment->hw.buf_addr,
+ segment->hw.buf_addr_msb);
+ else
+ vdma_desc_write(chan,
+ XILINX_VDMA_REG_START_ADDRESS(i++),
+ segment->hw.buf_addr);
+
+ last = segment;
+ }
+
+ if (!last)
+ return;
+
+ /* HW expects these parameters to be same for one transaction */
+ vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
+ vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
+ last->hw.stride);
+ vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
+
+ chan->desc_submitcount++;
+ chan->desc_pendingcount--;
+ list_del(&desc->node);
+ list_add_tail(&desc->node, &chan->active_list);
+ if (chan->desc_submitcount == chan->num_frms)
+ chan->desc_submitcount = 0;
+
+ chan->idle = false;
+}
+
+/**
+ * xilinx_cdma_start_transfer - Starts cdma transfer
+ * @chan: Driver specific channel struct pointer
+ */
+static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
+ struct xilinx_cdma_tx_segment *tail_segment;
+ u32 ctrl_reg = dma_read(chan, XILINX_DMA_REG_DMACR);
+
+ if (chan->err)
+ return;
+
+ if (!chan->idle)
+ return;
+
+ if (list_empty(&chan->pending_list))
+ return;
+
+ head_desc = list_first_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor, node);
+ tail_desc = list_last_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor, node);
+ tail_segment = list_last_entry(&tail_desc->segments,
+ struct xilinx_cdma_tx_segment, node);
+
+ if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
+ ctrl_reg &= ~XILINX_DMA_CR_COALESCE_MAX;
+ ctrl_reg |= chan->desc_pendingcount <<
+ XILINX_DMA_CR_COALESCE_SHIFT;
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, ctrl_reg);
+ }
+
+ if (chan->has_sg) {
+ dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
+ XILINX_CDMA_CR_SGMODE);
+
+ dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
+ XILINX_CDMA_CR_SGMODE);
+
+ xilinx_write(chan, XILINX_DMA_REG_CURDESC,
+ head_desc->async_tx.phys);
+
+ /* Update tail ptr register which will start the transfer */
+ xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
+ tail_segment->phys);
+ } else {
+ /* In simple mode */
+ struct xilinx_cdma_tx_segment *segment;
+ struct xilinx_cdma_desc_hw *hw;
+
+ segment = list_first_entry(&head_desc->segments,
+ struct xilinx_cdma_tx_segment,
+ node);
+
+ hw = &segment->hw;
+
+ xilinx_write(chan, XILINX_CDMA_REG_SRCADDR,
+ xilinx_prep_dma_addr_t(hw->src_addr));
+ xilinx_write(chan, XILINX_CDMA_REG_DSTADDR,
+ xilinx_prep_dma_addr_t(hw->dest_addr));
+
+ /* Start the transfer */
+ dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
+ hw->control & chan->xdev->max_buffer_len);
+ }
+
+ list_splice_tail_init(&chan->pending_list, &chan->active_list);
+ chan->desc_pendingcount = 0;
+ chan->idle = false;
+}
+
+/**
+ * xilinx_dma_start_transfer - Starts DMA transfer
+ * @chan: Driver specific channel struct pointer
+ */
+static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
+ struct xilinx_axidma_tx_segment *tail_segment;
+ u32 reg;
+
+ if (chan->err)
+ return;
+
+ if (list_empty(&chan->pending_list))
+ return;
+
+ if (!chan->idle)
+ return;
+
+ head_desc = list_first_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor, node);
+ tail_desc = list_last_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor, node);
+ tail_segment = list_last_entry(&tail_desc->segments,
+ struct xilinx_axidma_tx_segment, node);
+
+ reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+
+ if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
+ reg &= ~XILINX_DMA_CR_COALESCE_MAX;
+ reg |= chan->desc_pendingcount <<
+ XILINX_DMA_CR_COALESCE_SHIFT;
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
+ }
+
+ if (chan->has_sg && !chan->xdev->mcdma)
+ xilinx_write(chan, XILINX_DMA_REG_CURDESC,
+ head_desc->async_tx.phys);
+
+ if (chan->has_sg && chan->xdev->mcdma) {
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
+ head_desc->async_tx.phys);
+ } else {
+ if (!chan->tdest) {
+ dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
+ head_desc->async_tx.phys);
+ } else {
+ dma_ctrl_write(chan,
+ XILINX_DMA_MCRX_CDESC(chan->tdest),
+ head_desc->async_tx.phys);
+ }
+ }
+ }
+
+ xilinx_dma_start(chan);
+
+ if (chan->err)
+ return;
+
+ /* Start the transfer */
+ if (chan->has_sg && !chan->xdev->mcdma) {
+ if (chan->cyclic)
+ xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
+ chan->cyclic_seg_v->phys);
+ else
+ xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
+ tail_segment->phys);
+ } else if (chan->has_sg && chan->xdev->mcdma) {
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
+ tail_segment->phys);
+ } else {
+ if (!chan->tdest) {
+ dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
+ tail_segment->phys);
+ } else {
+ dma_ctrl_write(chan,
+ XILINX_DMA_MCRX_TDESC(chan->tdest),
+ tail_segment->phys);
+ }
+ }
+ } else {
+ struct xilinx_axidma_tx_segment *segment;
+ struct xilinx_axidma_desc_hw *hw;
+
+ segment = list_first_entry(&head_desc->segments,
+ struct xilinx_axidma_tx_segment,
+ node);
+ hw = &segment->hw;
+
+ xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR,
+ xilinx_prep_dma_addr_t(hw->buf_addr));
+
+ /* Start the transfer */
+ dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
+ hw->control & chan->xdev->max_buffer_len);
+ }
+
+ list_splice_tail_init(&chan->pending_list, &chan->active_list);
+ chan->desc_pendingcount = 0;
+ chan->idle = false;
+}
+
+/**
+ * xilinx_dma_issue_pending - Issue pending transactions
+ * @dchan: DMA channel
+ */
+static void xilinx_dma_issue_pending(struct dma_chan *dchan)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ chan->start_transfer(chan);
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+/**
+ * xilinx_dma_complete_descriptor - Mark the active descriptor as complete
+ * @chan : xilinx DMA channel
+ *
+ * CONTEXT: hardirq
+ */
+static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
+{
+ struct xilinx_dma_tx_descriptor *desc, *next;
+
+ /* This function was invoked with lock held */
+ if (list_empty(&chan->active_list))
+ return;
+
+ list_for_each_entry_safe(desc, next, &chan->active_list, node) {
+ list_del(&desc->node);
+ if (!desc->cyclic)
+ dma_cookie_complete(&desc->async_tx);
+ list_add_tail(&desc->node, &chan->done_list);
+ }
+}
+
+/**
+ * xilinx_dma_reset - Reset DMA channel
+ * @chan: Driver specific DMA channel
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
+{
+ int err;
+ u32 tmp;
+
+ dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RESET);
+
+ /* Wait for the hardware to finish reset */
+ err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMACR, tmp,
+ !(tmp & XILINX_DMA_DMACR_RESET), 0,
+ XILINX_DMA_LOOP_COUNT);
+
+ if (err) {
+ dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
+ dma_ctrl_read(chan, XILINX_DMA_REG_DMACR),
+ dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
+ return -ETIMEDOUT;
+ }
+
+ chan->err = false;
+ chan->idle = true;
+ chan->desc_pendingcount = 0;
+ chan->desc_submitcount = 0;
+
+ return err;
+}
+
+/**
+ * xilinx_dma_chan_reset - Reset DMA channel and enable interrupts
+ * @chan: Driver specific DMA channel
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_dma_chan_reset(struct xilinx_dma_chan *chan)
+{
+ int err;
+
+ /* Reset VDMA */
+ err = xilinx_dma_reset(chan);
+ if (err)
+ return err;
+
+ /* Enable interrupts */
+ dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
+ XILINX_DMA_DMAXR_ALL_IRQ_MASK);
+
+ return 0;
+}
+
+/**
+ * xilinx_dma_irq_handler - DMA Interrupt handler
+ * @irq: IRQ number
+ * @data: Pointer to the Xilinx DMA channel structure
+ *
+ * Return: IRQ_HANDLED/IRQ_NONE
+ */
+static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
+{
+ struct xilinx_dma_chan *chan = data;
+ u32 status;
+
+ /* Read the status and ack the interrupts. */
+ status = dma_ctrl_read(chan, XILINX_DMA_REG_DMASR);
+ if (!(status & XILINX_DMA_DMAXR_ALL_IRQ_MASK))
+ return IRQ_NONE;
+
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
+ status & XILINX_DMA_DMAXR_ALL_IRQ_MASK);
+
+ if (status & XILINX_DMA_DMASR_ERR_IRQ) {
+ /*
+ * An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
+ * error is recoverable, ignore it. Otherwise flag the error.
+ *
+ * Only recoverable errors can be cleared in the DMASR register,
+ * make sure not to write to other error bits to 1.
+ */
+ u32 errors = status & XILINX_DMA_DMASR_ALL_ERR_MASK;
+
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
+ errors & XILINX_DMA_DMASR_ERR_RECOVER_MASK);
+
+ if (!chan->flush_on_fsync ||
+ (errors & ~XILINX_DMA_DMASR_ERR_RECOVER_MASK)) {
+ dev_err(chan->dev,
+ "Channel %p has errors %x, cdr %x tdr %x\n",
+ chan, errors,
+ dma_ctrl_read(chan, XILINX_DMA_REG_CURDESC),
+ dma_ctrl_read(chan, XILINX_DMA_REG_TAILDESC));
+ chan->err = true;
+ }
+ }
+
+ if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
+ /*
+ * Device takes too long to do the transfer when user requires
+ * responsiveness.
+ */
+ dev_dbg(chan->dev, "Inter-packet latency too long\n");
+ }
+
+ if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
+ spin_lock(&chan->lock);
+ xilinx_dma_complete_descriptor(chan);
+ chan->idle = true;
+ chan->start_transfer(chan);
+ spin_unlock(&chan->lock);
+ }
+
+ tasklet_schedule(&chan->tasklet);
+ return IRQ_HANDLED;
+}
+
+/**
+ * append_desc_queue - Queuing descriptor
+ * @chan: Driver specific dma channel
+ * @desc: dma transaction descriptor
+ */
+static void append_desc_queue(struct xilinx_dma_chan *chan,
+ struct xilinx_dma_tx_descriptor *desc)
+{
+ struct xilinx_vdma_tx_segment *tail_segment;
+ struct xilinx_dma_tx_descriptor *tail_desc;
+ struct xilinx_axidma_tx_segment *axidma_tail_segment;
+ struct xilinx_cdma_tx_segment *cdma_tail_segment;
+
+ if (list_empty(&chan->pending_list))
+ goto append;
+
+ /*
+ * Add the hardware descriptor to the chain of hardware descriptors
+ * that already exists in memory.
+ */
+ tail_desc = list_last_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor, node);
+ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
+ tail_segment = list_last_entry(&tail_desc->segments,
+ struct xilinx_vdma_tx_segment,
+ node);
+ tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
+ } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
+ cdma_tail_segment = list_last_entry(&tail_desc->segments,
+ struct xilinx_cdma_tx_segment,
+ node);
+ cdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
+ } else {
+ axidma_tail_segment = list_last_entry(&tail_desc->segments,
+ struct xilinx_axidma_tx_segment,
+ node);
+ axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
+ }
+
+ /*
+ * Add the software descriptor and all children to the list
+ * of pending transactions
+ */
+append:
+ list_add_tail(&desc->node, &chan->pending_list);
+ chan->desc_pendingcount++;
+
+ if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
+ && unlikely(chan->desc_pendingcount > chan->num_frms)) {
+ dev_dbg(chan->dev, "desc pendingcount is too high\n");
+ chan->desc_pendingcount = chan->num_frms;
+ }
+}
+
+/**
+ * xilinx_dma_tx_submit - Submit DMA transaction
+ * @tx: Async transaction descriptor
+ *
+ * Return: cookie value on success and failure value on error
+ */
+static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct xilinx_dma_tx_descriptor *desc = to_dma_tx_descriptor(tx);
+ struct xilinx_dma_chan *chan = to_xilinx_chan(tx->chan);
+ dma_cookie_t cookie;
+ unsigned long flags;
+ int err;
+
+ if (chan->cyclic) {
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ return -EBUSY;
+ }
+
+ if (chan->err) {
+ /*
+ * If reset fails, need to hard reset the system.
+ * Channel is no longer functional
+ */
+ err = xilinx_dma_chan_reset(chan);
+ if (err < 0)
+ return err;
+ }
+
+ spin_lock_irqsave(&chan->lock, flags);
+
+ cookie = dma_cookie_assign(tx);
+
+ /* Put this transaction onto the tail of the pending queue */
+ append_desc_queue(chan, desc);
+
+ if (desc->cyclic)
+ chan->cyclic = true;
+
+ chan->terminating = false;
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ return cookie;
+}
+
+/**
+ * xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
+ * DMA_SLAVE transaction
+ * @dchan: DMA channel
+ * @xt: Interleaved template pointer
+ * @flags: transfer ack flags
+ *
+ * Return: Async transaction descriptor on success and NULL on failure
+ */
+static struct dma_async_tx_descriptor *
+xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
+ struct dma_interleaved_template *xt,
+ unsigned long flags)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ struct xilinx_dma_tx_descriptor *desc;
+ struct xilinx_vdma_tx_segment *segment;
+ struct xilinx_vdma_desc_hw *hw;
+
+ if (!is_slave_direction(xt->dir))
+ return NULL;
+
+ if (!xt->numf || !xt->sgl[0].size)
+ return NULL;
+
+ if (xt->frame_size != 1)
+ return NULL;
+
+ /* Allocate a transaction descriptor. */
+ desc = xilinx_dma_alloc_tx_descriptor(chan);
+ if (!desc)
+ return NULL;
+
+ dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+ desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+ async_tx_ack(&desc->async_tx);
+
+ /* Allocate the link descriptor from DMA pool */
+ segment = xilinx_vdma_alloc_tx_segment(chan);
+ if (!segment)
+ goto error;
+
+ /* Fill in the hardware descriptor */
+ hw = &segment->hw;
+ hw->vsize = xt->numf;
+ hw->hsize = xt->sgl[0].size;
+ hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
+ XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT;
+ hw->stride |= chan->config.frm_dly <<
+ XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
+
+ if (xt->dir != DMA_MEM_TO_DEV) {
+ if (chan->ext_addr) {
+ hw->buf_addr = lower_32_bits(xt->dst_start);
+ hw->buf_addr_msb = upper_32_bits(xt->dst_start);
+ } else {
+ hw->buf_addr = xt->dst_start;
+ }
+ } else {
+ if (chan->ext_addr) {
+ hw->buf_addr = lower_32_bits(xt->src_start);
+ hw->buf_addr_msb = upper_32_bits(xt->src_start);
+ } else {
+ hw->buf_addr = xt->src_start;
+ }
+ }
+
+ /* Insert the segment into the descriptor segments list. */
+ list_add_tail(&segment->node, &desc->segments);
+
+ /* Link the last hardware descriptor with the first. */
+ segment = list_first_entry(&desc->segments,
+ struct xilinx_vdma_tx_segment, node);
+ desc->async_tx.phys = segment->phys;
+
+ return &desc->async_tx;
+
+error:
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ return NULL;
+}
+
+/**
+ * xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
+ * @dchan: DMA channel
+ * @dma_dst: destination address
+ * @dma_src: source address
+ * @len: transfer length
+ * @flags: transfer ack flags
+ *
+ * Return: Async transaction descriptor on success and NULL on failure
+ */
+static struct dma_async_tx_descriptor *
+xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
+ dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ struct xilinx_dma_tx_descriptor *desc;
+ struct xilinx_cdma_tx_segment *segment;
+ struct xilinx_cdma_desc_hw *hw;
+
+ if (!len || len > chan->xdev->max_buffer_len)
+ return NULL;
+
+ desc = xilinx_dma_alloc_tx_descriptor(chan);
+ if (!desc)
+ return NULL;
+
+ dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+ desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+
+ /* Allocate the link descriptor from DMA pool */
+ segment = xilinx_cdma_alloc_tx_segment(chan);
+ if (!segment)
+ goto error;
+
+ hw = &segment->hw;
+ hw->control = len;
+ hw->src_addr = dma_src;
+ hw->dest_addr = dma_dst;
+ if (chan->ext_addr) {
+ hw->src_addr_msb = upper_32_bits(dma_src);
+ hw->dest_addr_msb = upper_32_bits(dma_dst);
+ }
+
+ /* Insert the segment into the descriptor segments list. */
+ list_add_tail(&segment->node, &desc->segments);
+
+ desc->async_tx.phys = segment->phys;
+ hw->next_desc = segment->phys;
+
+ return &desc->async_tx;
+
+error:
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ return NULL;
+}
+
+/**
+ * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @dchan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: transfer ack flags
+ * @context: APP words of the descriptor
+ *
+ * Return: Async transaction descriptor on success and NULL on failure
+ */
+static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
+ struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ struct xilinx_dma_tx_descriptor *desc;
+ struct xilinx_axidma_tx_segment *segment = NULL;
+ u32 *app_w = (u32 *)context;
+ struct scatterlist *sg;
+ size_t copy;
+ size_t sg_used;
+ unsigned int i;
+
+ if (!is_slave_direction(direction))
+ return NULL;
+
+ /* Allocate a transaction descriptor. */
+ desc = xilinx_dma_alloc_tx_descriptor(chan);
+ if (!desc)
+ return NULL;
+
+ dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+ desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+
+ /* Build transactions using information in the scatter gather list */
+ for_each_sg(sgl, sg, sg_len, i) {
+ sg_used = 0;
+
+ /* Loop until the entire scatterlist entry is used */
+ while (sg_used < sg_dma_len(sg)) {
+ struct xilinx_axidma_desc_hw *hw;
+
+ /* Get a free segment */
+ segment = xilinx_axidma_alloc_tx_segment(chan);
+ if (!segment)
+ goto error;
+
+ /*
+ * Calculate the maximum number of bytes to transfer,
+ * making sure it is less than the hw limit
+ */
+ copy = xilinx_dma_calc_copysize(chan, sg_dma_len(sg),
+ sg_used);
+ hw = &segment->hw;
+
+ /* Fill in the descriptor */
+ xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
+ sg_used, 0);
+
+ hw->control = copy;
+
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ if (app_w)
+ memcpy(hw->app, app_w, sizeof(u32) *
+ XILINX_DMA_NUM_APP_WORDS);
+ }
+
+ sg_used += copy;
+
+ /*
+ * Insert the segment into the descriptor segments
+ * list.
+ */
+ list_add_tail(&segment->node, &desc->segments);
+ }
+ }
+
+ segment = list_first_entry(&desc->segments,
+ struct xilinx_axidma_tx_segment, node);
+ desc->async_tx.phys = segment->phys;
+
+ /* For the last DMA_MEM_TO_DEV transfer, set EOP */
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ segment->hw.control |= XILINX_DMA_BD_SOP;
+ segment = list_last_entry(&desc->segments,
+ struct xilinx_axidma_tx_segment,
+ node);
+ segment->hw.control |= XILINX_DMA_BD_EOP;
+ }
+
+ return &desc->async_tx;
+
+error:
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ return NULL;
+}
+
+/**
+ * xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
+ * @dchan: DMA channel
+ * @buf_addr: Physical address of the buffer
+ * @buf_len: Total length of the cyclic buffers
+ * @period_len: length of individual cyclic buffer
+ * @direction: DMA direction
+ * @flags: transfer ack flags
+ *
+ * Return: Async transaction descriptor on success and NULL on failure
+ */
+static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
+ struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
+ size_t period_len, enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ struct xilinx_dma_tx_descriptor *desc;
+ struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
+ size_t copy, sg_used;
+ unsigned int num_periods;
+ int i;
+ u32 reg;
+
+ if (!period_len)
+ return NULL;
+
+ num_periods = buf_len / period_len;
+
+ if (!num_periods)
+ return NULL;
+
+ if (!is_slave_direction(direction))
+ return NULL;
+
+ /* Allocate a transaction descriptor. */
+ desc = xilinx_dma_alloc_tx_descriptor(chan);
+ if (!desc)
+ return NULL;
+
+ chan->direction = direction;
+ dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+ desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+
+ for (i = 0; i < num_periods; ++i) {
+ sg_used = 0;
+
+ while (sg_used < period_len) {
+ struct xilinx_axidma_desc_hw *hw;
+
+ /* Get a free segment */
+ segment = xilinx_axidma_alloc_tx_segment(chan);
+ if (!segment)
+ goto error;
+
+ /*
+ * Calculate the maximum number of bytes to transfer,
+ * making sure it is less than the hw limit
+ */
+ copy = xilinx_dma_calc_copysize(chan, period_len,
+ sg_used);
+ hw = &segment->hw;
+ xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
+ period_len * i);
+ hw->control = copy;
+
+ if (prev)
+ prev->hw.next_desc = segment->phys;
+
+ prev = segment;
+ sg_used += copy;
+
+ /*
+ * Insert the segment into the descriptor segments
+ * list.
+ */
+ list_add_tail(&segment->node, &desc->segments);
+ }
+ }
+
+ head_segment = list_first_entry(&desc->segments,
+ struct xilinx_axidma_tx_segment, node);
+ desc->async_tx.phys = head_segment->phys;
+
+ desc->cyclic = true;
+ reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+ reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
+
+ segment = list_last_entry(&desc->segments,
+ struct xilinx_axidma_tx_segment,
+ node);
+ segment->hw.next_desc = (u32) head_segment->phys;
+
+ /* For the last DMA_MEM_TO_DEV transfer, set EOP */
+ if (direction == DMA_MEM_TO_DEV) {
+ head_segment->hw.control |= XILINX_DMA_BD_SOP;
+ segment->hw.control |= XILINX_DMA_BD_EOP;
+ }
+
+ return &desc->async_tx;
+
+error:
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ return NULL;
+}
+
+/**
+ * xilinx_dma_prep_interleaved - prepare a descriptor for a
+ * DMA_SLAVE transaction
+ * @dchan: DMA channel
+ * @xt: Interleaved template pointer
+ * @flags: transfer ack flags
+ *
+ * Return: Async transaction descriptor on success and NULL on failure
+ */
+static struct dma_async_tx_descriptor *
+xilinx_dma_prep_interleaved(struct dma_chan *dchan,
+ struct dma_interleaved_template *xt,
+ unsigned long flags)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ struct xilinx_dma_tx_descriptor *desc;
+ struct xilinx_axidma_tx_segment *segment;
+ struct xilinx_axidma_desc_hw *hw;
+
+ if (!is_slave_direction(xt->dir))
+ return NULL;
+
+ if (!xt->numf || !xt->sgl[0].size)
+ return NULL;
+
+ if (xt->frame_size != 1)
+ return NULL;
+
+ /* Allocate a transaction descriptor. */
+ desc = xilinx_dma_alloc_tx_descriptor(chan);
+ if (!desc)
+ return NULL;
+
+ chan->direction = xt->dir;
+ dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+ desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+
+ /* Get a free segment */
+ segment = xilinx_axidma_alloc_tx_segment(chan);
+ if (!segment)
+ goto error;
+
+ hw = &segment->hw;
+
+ /* Fill in the descriptor */
+ if (xt->dir != DMA_MEM_TO_DEV)
+ hw->buf_addr = xt->dst_start;
+ else
+ hw->buf_addr = xt->src_start;
+
+ hw->mcdma_control = chan->tdest & XILINX_DMA_BD_TDEST_MASK;
+ hw->vsize_stride = (xt->numf << XILINX_DMA_BD_VSIZE_SHIFT) &
+ XILINX_DMA_BD_VSIZE_MASK;
+ hw->vsize_stride |= (xt->sgl[0].icg + xt->sgl[0].size) &
+ XILINX_DMA_BD_STRIDE_MASK;
+ hw->control = xt->sgl[0].size & XILINX_DMA_BD_HSIZE_MASK;
+
+ /*
+ * Insert the segment into the descriptor segments
+ * list.
+ */
+ list_add_tail(&segment->node, &desc->segments);
+
+
+ segment = list_first_entry(&desc->segments,
+ struct xilinx_axidma_tx_segment, node);
+ desc->async_tx.phys = segment->phys;
+
+ /* For the last DMA_MEM_TO_DEV transfer, set EOP */
+ if (xt->dir == DMA_MEM_TO_DEV) {
+ segment->hw.control |= XILINX_DMA_BD_SOP;
+ segment = list_last_entry(&desc->segments,
+ struct xilinx_axidma_tx_segment,
+ node);
+ segment->hw.control |= XILINX_DMA_BD_EOP;
+ }
+
+ return &desc->async_tx;
+
+error:
+ xilinx_dma_free_tx_descriptor(chan, desc);
+ return NULL;
+}
+
+/**
+ * xilinx_dma_terminate_all - Halt the channel and free descriptors
+ * @dchan: Driver specific DMA Channel pointer
+ *
+ * Return: '0' always.
+ */
+static int xilinx_dma_terminate_all(struct dma_chan *dchan)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ u32 reg;
+ int err;
+
+ if (chan->cyclic)
+ xilinx_dma_chan_reset(chan);
+
+ err = chan->stop_transfer(chan);
+ if (err) {
+ dev_err(chan->dev, "Cannot stop channel %p: %x\n",
+ chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
+ chan->err = true;
+ }
+
+ /* Remove and free all of the descriptors in the lists */
+ chan->terminating = true;
+ xilinx_dma_free_descriptors(chan);
+ chan->idle = true;
+
+ if (chan->cyclic) {
+ reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+ reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
+ chan->cyclic = false;
+ }
+
+ if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
+ dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
+ XILINX_CDMA_CR_SGMODE);
+
+ return 0;
+}
+
+/**
+ * xilinx_dma_channel_set_config - Configure VDMA channel
+ * Run-time configuration for Axi VDMA, supports:
+ * . halt the channel
+ * . configure interrupt coalescing and inter-packet delay threshold
+ * . start/stop parking
+ * . enable genlock
+ *
+ * @dchan: DMA channel
+ * @cfg: VDMA device configuration pointer
+ *
+ * Return: '0' on success and failure value on error
+ */
+int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
+ struct xilinx_vdma_config *cfg)
+{
+ struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+ u32 dmacr;
+
+ if (cfg->reset)
+ return xilinx_dma_chan_reset(chan);
+
+ dmacr = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+
+ chan->config.frm_dly = cfg->frm_dly;
+ chan->config.park = cfg->park;
+
+ /* genlock settings */
+ chan->config.gen_lock = cfg->gen_lock;
+ chan->config.master = cfg->master;
+
+ dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
+ if (cfg->gen_lock && chan->genlock) {
+ dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
+ dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
+ dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
+ }
+
+ chan->config.frm_cnt_en = cfg->frm_cnt_en;
+ chan->config.vflip_en = cfg->vflip_en;
+
+ if (cfg->park)
+ chan->config.park_frm = cfg->park_frm;
+ else
+ chan->config.park_frm = -1;
+
+ chan->config.coalesc = cfg->coalesc;
+ chan->config.delay = cfg->delay;
+
+ if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
+ dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
+ dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
+ chan->config.coalesc = cfg->coalesc;
+ }
+
+ if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
+ dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
+ dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
+ chan->config.delay = cfg->delay;
+ }
+
+ /* FSync Source selection */
+ dmacr &= ~XILINX_DMA_DMACR_FSYNCSRC_MASK;
+ dmacr |= cfg->ext_fsync << XILINX_DMA_DMACR_FSYNCSRC_SHIFT;
+
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, dmacr);
+
+ return 0;
+}
+EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
+
+/* -----------------------------------------------------------------------------
+ * Probe and remove
+ */
+
+/**
+ * xilinx_dma_chan_remove - Per Channel remove function
+ * @chan: Driver specific DMA channel
+ */
+static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
+{
+ /* Disable all interrupts */
+ dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
+ XILINX_DMA_DMAXR_ALL_IRQ_MASK);
+
+ if (chan->irq > 0)
+ free_irq(chan->irq, chan);
+
+ tasklet_kill(&chan->tasklet);
+
+ list_del(&chan->common.device_node);
+}
+
+static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+ struct clk **tx_clk, struct clk **rx_clk,
+ struct clk **sg_clk, struct clk **tmp_clk)
+{
+ int err;
+
+ *tmp_clk = NULL;
+
+ *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+ if (IS_ERR(*axi_clk)) {
+ err = PTR_ERR(*axi_clk);
+ dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n", err);
+ return err;
+ }
+
+ *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+ if (IS_ERR(*tx_clk))
+ *tx_clk = NULL;
+
+ *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+ if (IS_ERR(*rx_clk))
+ *rx_clk = NULL;
+
+ *sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
+ if (IS_ERR(*sg_clk))
+ *sg_clk = NULL;
+
+ err = clk_prepare_enable(*axi_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(*tx_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
+ goto err_disable_axiclk;
+ }
+
+ err = clk_prepare_enable(*rx_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
+ goto err_disable_txclk;
+ }
+
+ err = clk_prepare_enable(*sg_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable sg_clk (%d)\n", err);
+ goto err_disable_rxclk;
+ }
+
+ return 0;
+
+err_disable_rxclk:
+ clk_disable_unprepare(*rx_clk);
+err_disable_txclk:
+ clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+ clk_disable_unprepare(*axi_clk);
+
+ return err;
+}
+
+static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+ struct clk **dev_clk, struct clk **tmp_clk,
+ struct clk **tmp1_clk, struct clk **tmp2_clk)
+{
+ int err;
+
+ *tmp_clk = NULL;
+ *tmp1_clk = NULL;
+ *tmp2_clk = NULL;
+
+ *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+ if (IS_ERR(*axi_clk)) {
+ err = PTR_ERR(*axi_clk);
+ dev_err(&pdev->dev, "failed to get axi_clk (%d)\n", err);
+ return err;
+ }
+
+ *dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
+ if (IS_ERR(*dev_clk)) {
+ err = PTR_ERR(*dev_clk);
+ dev_err(&pdev->dev, "failed to get dev_clk (%d)\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(*axi_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(*dev_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable dev_clk (%d)\n", err);
+ goto err_disable_axiclk;
+ }
+
+ return 0;
+
+err_disable_axiclk:
+ clk_disable_unprepare(*axi_clk);
+
+ return err;
+}
+
+static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+ struct clk **tx_clk, struct clk **txs_clk,
+ struct clk **rx_clk, struct clk **rxs_clk)
+{
+ int err;
+
+ *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+ if (IS_ERR(*axi_clk)) {
+ err = PTR_ERR(*axi_clk);
+ dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n", err);
+ return err;
+ }
+
+ *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+ if (IS_ERR(*tx_clk))
+ *tx_clk = NULL;
+
+ *txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
+ if (IS_ERR(*txs_clk))
+ *txs_clk = NULL;
+
+ *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+ if (IS_ERR(*rx_clk))
+ *rx_clk = NULL;
+
+ *rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
+ if (IS_ERR(*rxs_clk))
+ *rxs_clk = NULL;
+
+ err = clk_prepare_enable(*axi_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(*tx_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
+ goto err_disable_axiclk;
+ }
+
+ err = clk_prepare_enable(*txs_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable txs_clk (%d)\n", err);
+ goto err_disable_txclk;
+ }
+
+ err = clk_prepare_enable(*rx_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
+ goto err_disable_txsclk;
+ }
+
+ err = clk_prepare_enable(*rxs_clk);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable rxs_clk (%d)\n", err);
+ goto err_disable_rxclk;
+ }
+
+ return 0;
+
+err_disable_rxclk:
+ clk_disable_unprepare(*rx_clk);
+err_disable_txsclk:
+ clk_disable_unprepare(*txs_clk);
+err_disable_txclk:
+ clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+ clk_disable_unprepare(*axi_clk);
+
+ return err;
+}
+
+static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
+{
+ clk_disable_unprepare(xdev->rxs_clk);
+ clk_disable_unprepare(xdev->rx_clk);
+ clk_disable_unprepare(xdev->txs_clk);
+ clk_disable_unprepare(xdev->tx_clk);
+ clk_disable_unprepare(xdev->axi_clk);
+}
+
+/**
+ * xilinx_dma_chan_probe - Per Channel Probing
+ * It get channel features from the device tree entry and
+ * initialize special channel handling routines
+ *
+ * @xdev: Driver specific device structure
+ * @node: Device node
+ * @chan_id: DMA Channel id
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
+ struct device_node *node, int chan_id)
+{
+ struct xilinx_dma_chan *chan;
+ bool has_dre = false;
+ u32 value, width;
+ int err;
+
+ /* Allocate and initialize the channel structure */
+ chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
+ if (!chan)
+ return -ENOMEM;
+
+ chan->dev = xdev->dev;
+ chan->xdev = xdev;
+ chan->desc_pendingcount = 0x0;
+ chan->ext_addr = xdev->ext_addr;
+ /* This variable ensures that descriptors are not
+ * Submitted when dma engine is in progress. This variable is
+ * Added to avoid polling for a bit in the status register to
+ * Know dma state in the driver hot path.
+ */
+ chan->idle = true;
+
+ spin_lock_init(&chan->lock);
+ INIT_LIST_HEAD(&chan->pending_list);
+ INIT_LIST_HEAD(&chan->done_list);
+ INIT_LIST_HEAD(&chan->active_list);
+ INIT_LIST_HEAD(&chan->free_seg_list);
+
+ /* Retrieve the channel properties from the device tree */
+ has_dre = of_property_read_bool(node, "xlnx,include-dre");
+
+ chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
+
+ err = of_property_read_u32(node, "xlnx,datawidth", &value);
+ if (err) {
+ dev_err(xdev->dev, "missing xlnx,datawidth property\n");
+ return err;
+ }
+ width = value >> 3; /* Convert bits to bytes */
+
+ /* If data width is greater than 8 bytes, DRE is not in hw */
+ if (width > 8)
+ has_dre = false;
+
+ if (!has_dre)
+ xdev->common.copy_align = (enum dmaengine_alignment)fls(width - 1);
+
+ if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
+ of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
+ of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
+ chan->direction = DMA_MEM_TO_DEV;
+ chan->id = chan_id;
+ chan->tdest = chan_id;
+
+ chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
+ if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
+ chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
+ chan->config.park = 1;
+
+ if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
+ xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S)
+ chan->flush_on_fsync = true;
+ }
+ } else if (of_device_is_compatible(node,
+ "xlnx,axi-vdma-s2mm-channel") ||
+ of_device_is_compatible(node,
+ "xlnx,axi-dma-s2mm-channel")) {
+ chan->direction = DMA_DEV_TO_MEM;
+ chan->id = chan_id;
+ chan->tdest = chan_id - xdev->nr_channels;
+ chan->has_vflip = of_property_read_bool(node,
+ "xlnx,enable-vert-flip");
+ if (chan->has_vflip) {
+ chan->config.vflip_en = dma_read(chan,
+ XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP) &
+ XILINX_VDMA_ENABLE_VERTICAL_FLIP;
+ }
+
+ chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
+ if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
+ chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
+ chan->config.park = 1;
+
+ if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
+ xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM)
+ chan->flush_on_fsync = true;
+ }
+ } else {
+ dev_err(xdev->dev, "Invalid channel compatible node\n");
+ return -EINVAL;
+ }
+
+ /* Request the interrupt */
+ chan->irq = irq_of_parse_and_map(node, 0);
+ err = request_irq(chan->irq, xilinx_dma_irq_handler, IRQF_SHARED,
+ "xilinx-dma-controller", chan);
+ if (err) {
+ dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
+ return err;
+ }
+
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ chan->start_transfer = xilinx_dma_start_transfer;
+ chan->stop_transfer = xilinx_dma_stop_transfer;
+ } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
+ chan->start_transfer = xilinx_cdma_start_transfer;
+ chan->stop_transfer = xilinx_cdma_stop_transfer;
+ } else {
+ chan->start_transfer = xilinx_vdma_start_transfer;
+ chan->stop_transfer = xilinx_dma_stop_transfer;
+ }
+
+ /* check if SG is enabled (only for AXIDMA and CDMA) */
+ if (xdev->dma_config->dmatype != XDMA_TYPE_VDMA) {
+ if (dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
+ XILINX_DMA_DMASR_SG_MASK)
+ chan->has_sg = true;
+ dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id,
+ chan->has_sg ? "enabled" : "disabled");
+ }
+
+ /* Initialize the tasklet */
+ tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
+ (unsigned long)chan);
+
+ /*
+ * Initialize the DMA channel and add it to the DMA engine channels
+ * list.
+ */
+ chan->common.device = &xdev->common;
+
+ list_add_tail(&chan->common.device_node, &xdev->common.channels);
+ xdev->chan[chan->id] = chan;
+
+ /* Reset the channel */
+ err = xilinx_dma_chan_reset(chan);
+ if (err < 0) {
+ dev_err(xdev->dev, "Reset channel failed\n");
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * xilinx_dma_child_probe - Per child node probe
+ * It get number of dma-channels per child node from
+ * device-tree and initializes all the channels.
+ *
+ * @xdev: Driver specific device structure
+ * @node: Device node
+ *
+ * Return: 0 always.
+ */
+static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
+ struct device_node *node)
+{
+ int ret, i;
+ u32 nr_channels = 1;
+
+ ret = of_property_read_u32(node, "dma-channels", &nr_channels);
+ if ((ret < 0) && xdev->mcdma)
+ dev_warn(xdev->dev, "missing dma-channels property\n");
+
+ for (i = 0; i < nr_channels; i++)
+ xilinx_dma_chan_probe(xdev, node, xdev->chan_id++);
+
+ xdev->nr_channels += nr_channels;
+
+ return 0;
+}
+
+/**
+ * of_dma_xilinx_xlate - Translation function
+ * @dma_spec: Pointer to DMA specifier as found in the device tree
+ * @ofdma: Pointer to DMA controller data
+ *
+ * Return: DMA channel pointer on success and NULL on error
+ */
+static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct xilinx_dma_device *xdev = ofdma->of_dma_data;
+ int chan_id = dma_spec->args[0];
+
+ if (chan_id >= xdev->nr_channels || !xdev->chan[chan_id])
+ return NULL;
+
+ return dma_get_slave_channel(&xdev->chan[chan_id]->common);
+}
+
+static const struct xilinx_dma_config axidma_config = {
+ .dmatype = XDMA_TYPE_AXIDMA,
+ .clk_init = axidma_clk_init,
+};
+
+static const struct xilinx_dma_config axicdma_config = {
+ .dmatype = XDMA_TYPE_CDMA,
+ .clk_init = axicdma_clk_init,
+};
+
+static const struct xilinx_dma_config axivdma_config = {
+ .dmatype = XDMA_TYPE_VDMA,
+ .clk_init = axivdma_clk_init,
+};
+
+static const struct of_device_id xilinx_dma_of_ids[] = {
+ { .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
+ { .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
+ { .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
+ {}
+};
+MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
+
+/**
+ * xilinx_dma_probe - Driver probe function
+ * @pdev: Pointer to the platform_device structure
+ *
+ * Return: '0' on success and failure value on error
+ */
+static int xilinx_dma_probe(struct platform_device *pdev)
+{
+ int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
+ struct clk **, struct clk **, struct clk **)
+ = axivdma_clk_init;
+ struct device_node *node = pdev->dev.of_node;
+ struct xilinx_dma_device *xdev;
+ struct device_node *child, *np = pdev->dev.of_node;
+ u32 num_frames, addr_width, len_width;
+ int i, err;
+
+ /* Allocate and initialize the DMA engine structure */
+ xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
+ if (!xdev)
+ return -ENOMEM;
+
+ xdev->dev = &pdev->dev;
+ if (np) {
+ const struct of_device_id *match;
+
+ match = of_match_node(xilinx_dma_of_ids, np);
+ if (match && match->data) {
+ xdev->dma_config = match->data;
+ clk_init = xdev->dma_config->clk_init;
+ }
+ }
+
+ err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
+ &xdev->rx_clk, &xdev->rxs_clk);
+ if (err)
+ return err;
+
+ /* Request and map I/O memory */
+ xdev->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(xdev->regs)) {
+ err = PTR_ERR(xdev->regs);
+ goto disable_clks;
+ }
+ /* Retrieve the DMA engine properties from the device tree */
+ xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
+
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
+ if (!of_property_read_u32(node, "xlnx,sg-length-width",
+ &len_width)) {
+ if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
+ len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
+ dev_warn(xdev->dev,
+ "invalid xlnx,sg-length-width property value. Using default width\n");
+ } else {
+ if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
+ dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
+ xdev->max_buffer_len =
+ GENMASK(len_width - 1, 0);
+ }
+ }
+ }
+
+ if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
+ err = of_property_read_u32(node, "xlnx,num-fstores",
+ &num_frames);
+ if (err < 0) {
+ dev_err(xdev->dev,
+ "missing xlnx,num-fstores property\n");
+ goto disable_clks;
+ }
+
+ err = of_property_read_u32(node, "xlnx,flush-fsync",
+ &xdev->flush_on_fsync);
+ if (err < 0)
+ dev_warn(xdev->dev,
+ "missing xlnx,flush-fsync property\n");
+ }
+
+ err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width);
+ if (err < 0)
+ dev_warn(xdev->dev, "missing xlnx,addrwidth property\n");
+
+ if (addr_width > 32)
+ xdev->ext_addr = true;
+ else
+ xdev->ext_addr = false;
+
+ /* Set the dma mask bits */
+ err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+ if (err < 0) {
+ dev_err(xdev->dev, "DMA mask error %d\n", err);
+ goto disable_clks;
+ }
+
+ /* Initialize the DMA engine */
+ xdev->common.dev = &pdev->dev;
+
+ INIT_LIST_HEAD(&xdev->common.channels);
+ if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
+ dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
+ }
+
+ xdev->common.device_alloc_chan_resources =
+ xilinx_dma_alloc_chan_resources;
+ xdev->common.device_free_chan_resources =
+ xilinx_dma_free_chan_resources;
+ xdev->common.device_terminate_all = xilinx_dma_terminate_all;
+ xdev->common.device_tx_status = xilinx_dma_tx_status;
+ xdev->common.device_issue_pending = xilinx_dma_issue_pending;
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+ dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
+ xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
+ xdev->common.device_prep_dma_cyclic =
+ xilinx_dma_prep_dma_cyclic;
+ xdev->common.device_prep_interleaved_dma =
+ xilinx_dma_prep_interleaved;
+ /* Residue calculation is supported by only AXI DMA */
+ xdev->common.residue_granularity =
+ DMA_RESIDUE_GRANULARITY_SEGMENT;
+ } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
+ dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
+ xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
+ } else {
+ xdev->common.device_prep_interleaved_dma =
+ xilinx_vdma_dma_prep_interleaved;
+ }
+
+ platform_set_drvdata(pdev, xdev);
+
+ /* Initialize the channels */
+ for_each_child_of_node(node, child) {
+ err = xilinx_dma_child_probe(xdev, child);
+ if (err < 0) {
+ of_node_put(child);
+ goto error;
+ }
+ }
+
+ if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
+ for (i = 0; i < xdev->nr_channels; i++)
+ if (xdev->chan[i])
+ xdev->chan[i]->num_frms = num_frames;
+ }
+
+ /* Register the DMA engine with the core */
+ err = dma_async_device_register(&xdev->common);
+ if (err) {
+ dev_err(xdev->dev, "failed to register the dma device\n");
+ goto error;
+ }
+
+ err = of_dma_controller_register(node, of_dma_xilinx_xlate,
+ xdev);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Unable to register DMA to DT\n");
+ dma_async_device_unregister(&xdev->common);
+ goto error;
+ }
+
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+ dev_info(&pdev->dev, "Xilinx AXI DMA Engine Driver Probed!!\n");
+ else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
+ dev_info(&pdev->dev, "Xilinx AXI CDMA Engine Driver Probed!!\n");
+ else
+ dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
+
+ return 0;
+
+error:
+ for (i = 0; i < xdev->nr_channels; i++)
+ if (xdev->chan[i])
+ xilinx_dma_chan_remove(xdev->chan[i]);
+disable_clks:
+ xdma_disable_allclks(xdev);
+
+ return err;
+}
+
+/**
+ * xilinx_dma_remove - Driver remove function
+ * @pdev: Pointer to the platform_device structure
+ *
+ * Return: Always '0'
+ */
+static int xilinx_dma_remove(struct platform_device *pdev)
+{
+ struct xilinx_dma_device *xdev = platform_get_drvdata(pdev);
+ int i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+
+ dma_async_device_unregister(&xdev->common);
+
+ for (i = 0; i < xdev->nr_channels; i++)
+ if (xdev->chan[i])
+ xilinx_dma_chan_remove(xdev->chan[i]);
+
+ xdma_disable_allclks(xdev);
+
+ return 0;
+}
+
+static struct platform_driver xilinx_vdma_driver = {
+ .driver = {
+ .name = "xilinx-vdma",
+ .of_match_table = xilinx_dma_of_ids,
+ },
+ .probe = xilinx_dma_probe,
+ .remove = xilinx_dma_remove,
+};
+
+module_platform_driver(xilinx_vdma_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx VDMA driver");
+MODULE_LICENSE("GPL v2");