ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/gpu/drm/aspeed/aspeed_gfx.h b/marvell/linux/drivers/gpu/drm/aspeed/aspeed_gfx.h
new file mode 100644
index 0000000..a10358b
--- /dev/null
+++ b/marvell/linux/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright 2018 IBM Corporation */
+
+#include <drm/drm_device.h>
+#include <drm/drm_simple_kms_helper.h>
+
+struct aspeed_gfx {
+ void __iomem *base;
+ struct clk *clk;
+ struct reset_control *rst;
+ struct regmap *scu;
+
+ struct drm_simple_display_pipe pipe;
+ struct drm_connector connector;
+ struct drm_fbdev_cma *fbdev;
+};
+
+int aspeed_gfx_create_pipe(struct drm_device *drm);
+int aspeed_gfx_create_output(struct drm_device *drm);
+
+#define CRT_CTRL1 0x60 /* CRT Control I */
+#define CRT_CTRL2 0x64 /* CRT Control II */
+#define CRT_STATUS 0x68 /* CRT Status */
+#define CRT_MISC 0x6c /* CRT Misc Setting */
+#define CRT_HORIZ0 0x70 /* CRT Horizontal Total & Display Enable End */
+#define CRT_HORIZ1 0x74 /* CRT Horizontal Retrace Start & End */
+#define CRT_VERT0 0x78 /* CRT Vertical Total & Display Enable End */
+#define CRT_VERT1 0x7C /* CRT Vertical Retrace Start & End */
+#define CRT_ADDR 0x80 /* CRT Display Starting Address */
+#define CRT_OFFSET 0x84 /* CRT Display Offset & Terminal Count */
+#define CRT_THROD 0x88 /* CRT Threshold */
+#define CRT_XSCALE 0x8C /* CRT Scaling-Up Factor */
+#define CRT_CURSOR0 0x90 /* CRT Hardware Cursor X & Y Offset */
+#define CRT_CURSOR1 0x94 /* CRT Hardware Cursor X & Y Position */
+#define CRT_CURSOR2 0x98 /* CRT Hardware Cursor Pattern Address */
+#define CRT_9C 0x9C
+#define CRT_OSD_H 0xA0 /* CRT OSD Horizontal Start/End */
+#define CRT_OSD_V 0xA4 /* CRT OSD Vertical Start/End */
+#define CRT_OSD_ADDR 0xA8 /* CRT OSD Pattern Address */
+#define CRT_OSD_DISP 0xAC /* CRT OSD Offset */
+#define CRT_OSD_THRESH 0xB0 /* CRT OSD Threshold & Alpha */
+#define CRT_B4 0xB4
+#define CRT_STS_V 0xB8 /* CRT Status V */
+#define CRT_SCRATCH 0xBC /* Scratchpad */
+#define CRT_BB0_ADDR 0xD0 /* CRT Display BB0 Starting Address */
+#define CRT_BB1_ADDR 0xD4 /* CRT Display BB1 Starting Address */
+#define CRT_BB_COUNT 0xD8 /* CRT Display BB Terminal Count */
+#define OSD_COLOR1 0xE0 /* OSD Color Palette Index 1 & 0 */
+#define OSD_COLOR2 0xE4 /* OSD Color Palette Index 3 & 2 */
+#define OSD_COLOR3 0xE8 /* OSD Color Palette Index 5 & 4 */
+#define OSD_COLOR4 0xEC /* OSD Color Palette Index 7 & 6 */
+#define OSD_COLOR5 0xF0 /* OSD Color Palette Index 9 & 8 */
+#define OSD_COLOR6 0xF4 /* OSD Color Palette Index 11 & 10 */
+#define OSD_COLOR7 0xF8 /* OSD Color Palette Index 13 & 12 */
+#define OSD_COLOR8 0xFC /* OSD Color Palette Index 15 & 14 */
+
+/* CTRL1 */
+#define CRT_CTRL_EN BIT(0)
+#define CRT_CTRL_HW_CURSOR_EN BIT(1)
+#define CRT_CTRL_OSD_EN BIT(2)
+#define CRT_CTRL_INTERLACED BIT(3)
+#define CRT_CTRL_COLOR_RGB565 (0 << 7)
+#define CRT_CTRL_COLOR_YUV444 (1 << 7)
+#define CRT_CTRL_COLOR_XRGB8888 (2 << 7)
+#define CRT_CTRL_COLOR_RGB888 (3 << 7)
+#define CRT_CTRL_COLOR_YUV444_2RGB (5 << 7)
+#define CRT_CTRL_COLOR_YUV422 (7 << 7)
+#define CRT_CTRL_COLOR_MASK GENMASK(9, 7)
+#define CRT_CTRL_HSYNC_NEGATIVE BIT(16)
+#define CRT_CTRL_VSYNC_NEGATIVE BIT(17)
+#define CRT_CTRL_VERTICAL_INTR_EN BIT(30)
+#define CRT_CTRL_VERTICAL_INTR_STS BIT(31)
+
+/* CTRL2 */
+#define CRT_CTRL_DAC_EN BIT(0)
+#define CRT_CTRL_VBLANK_LINE(x) (((x) << 20) & CRT_CTRL_VBLANK_LINE_MASK)
+#define CRT_CTRL_VBLANK_LINE_MASK GENMASK(20, 31)
+
+/* CRT_HORIZ0 */
+#define CRT_H_TOTAL(x) (x)
+#define CRT_H_DE(x) ((x) << 16)
+
+/* CRT_HORIZ1 */
+#define CRT_H_RS_START(x) (x)
+#define CRT_H_RS_END(x) ((x) << 16)
+
+/* CRT_VIRT0 */
+#define CRT_V_TOTAL(x) (x)
+#define CRT_V_DE(x) ((x) << 16)
+
+/* CRT_VIRT1 */
+#define CRT_V_RS_START(x) (x)
+#define CRT_V_RS_END(x) ((x) << 16)
+
+/* CRT_OFFSET */
+#define CRT_DISP_OFFSET(x) (x)
+#define CRT_TERM_COUNT(x) ((x) << 16)
+
+/* CRT_THROD */
+#define CRT_THROD_LOW(x) (x)
+#define CRT_THROD_HIGH(x) ((x) << 8)
+
+/* Default Threshold Seting */
+#define G5_CRT_THROD_VAL (CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3C))