ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/gpu/drm/drm_client_modeset.c b/marvell/linux/drivers/gpu/drm/drm_client_modeset.c
new file mode 100644
index 0000000..283cb57
--- /dev/null
+++ b/marvell/linux/drivers/gpu/drm/drm_client_modeset.c
@@ -0,0 +1,1139 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright 2018 Noralf Trønnes
+ * Copyright (c) 2006-2009 Red Hat Inc.
+ * Copyright (c) 2006-2008 Intel Corporation
+ * Jesse Barnes <jesse.barnes@intel.com>
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_client.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_print.h>
+
+#include "drm_crtc_internal.h"
+#include "drm_internal.h"
+
+#define DRM_CLIENT_MAX_CLONED_CONNECTORS 8
+
+struct drm_client_offset {
+ int x, y;
+};
+
+int drm_client_modeset_create(struct drm_client_dev *client)
+{
+ struct drm_device *dev = client->dev;
+ unsigned int num_crtc = dev->mode_config.num_crtc;
+ unsigned int max_connector_count = 1;
+ struct drm_mode_set *modeset;
+ struct drm_crtc *crtc;
+ unsigned int i = 0;
+
+ /* Add terminating zero entry to enable index less iteration */
+ client->modesets = kcalloc(num_crtc + 1, sizeof(*client->modesets), GFP_KERNEL);
+ if (!client->modesets)
+ return -ENOMEM;
+
+ mutex_init(&client->modeset_mutex);
+
+ drm_for_each_crtc(crtc, dev)
+ client->modesets[i++].crtc = crtc;
+
+ /* Cloning is only supported in the single crtc case. */
+ if (num_crtc == 1)
+ max_connector_count = DRM_CLIENT_MAX_CLONED_CONNECTORS;
+
+ for (modeset = client->modesets; modeset->crtc; modeset++) {
+ modeset->connectors = kcalloc(max_connector_count,
+ sizeof(*modeset->connectors), GFP_KERNEL);
+ if (!modeset->connectors)
+ goto err_free;
+ }
+
+ return 0;
+
+err_free:
+ drm_client_modeset_free(client);
+
+ return -ENOMEM;
+}
+
+static void drm_client_modeset_release(struct drm_client_dev *client)
+{
+ struct drm_mode_set *modeset;
+ unsigned int i;
+
+ drm_client_for_each_modeset(modeset, client) {
+ drm_mode_destroy(client->dev, modeset->mode);
+ modeset->mode = NULL;
+ modeset->fb = NULL;
+
+ for (i = 0; i < modeset->num_connectors; i++) {
+ drm_connector_put(modeset->connectors[i]);
+ modeset->connectors[i] = NULL;
+ }
+ modeset->num_connectors = 0;
+ }
+}
+
+void drm_client_modeset_free(struct drm_client_dev *client)
+{
+ struct drm_mode_set *modeset;
+
+ mutex_lock(&client->modeset_mutex);
+
+ drm_client_modeset_release(client);
+
+ drm_client_for_each_modeset(modeset, client)
+ kfree(modeset->connectors);
+
+ mutex_unlock(&client->modeset_mutex);
+
+ mutex_destroy(&client->modeset_mutex);
+ kfree(client->modesets);
+}
+
+static struct drm_mode_set *
+drm_client_find_modeset(struct drm_client_dev *client, struct drm_crtc *crtc)
+{
+ struct drm_mode_set *modeset;
+
+ drm_client_for_each_modeset(modeset, client)
+ if (modeset->crtc == crtc)
+ return modeset;
+
+ return NULL;
+}
+
+static struct drm_display_mode *
+drm_connector_has_preferred_mode(struct drm_connector *connector, int width, int height)
+{
+ struct drm_display_mode *mode;
+
+ list_for_each_entry(mode, &connector->modes, head) {
+ if (mode->hdisplay > width ||
+ mode->vdisplay > height)
+ continue;
+ if (mode->type & DRM_MODE_TYPE_PREFERRED)
+ return mode;
+ }
+ return NULL;
+}
+
+static struct drm_display_mode *
+drm_connector_pick_cmdline_mode(struct drm_connector *connector)
+{
+ struct drm_cmdline_mode *cmdline_mode;
+ struct drm_display_mode *mode;
+ bool prefer_non_interlace;
+
+ cmdline_mode = &connector->cmdline_mode;
+ if (cmdline_mode->specified == false)
+ return NULL;
+
+ /* attempt to find a matching mode in the list of modes
+ * we have gotten so far, if not add a CVT mode that conforms
+ */
+ if (cmdline_mode->rb || cmdline_mode->margins)
+ goto create_mode;
+
+ prefer_non_interlace = !cmdline_mode->interlace;
+again:
+ list_for_each_entry(mode, &connector->modes, head) {
+ /* Check (optional) mode name first */
+ if (!strcmp(mode->name, cmdline_mode->name))
+ return mode;
+
+ /* check width/height */
+ if (mode->hdisplay != cmdline_mode->xres ||
+ mode->vdisplay != cmdline_mode->yres)
+ continue;
+
+ if (cmdline_mode->refresh_specified) {
+ if (mode->vrefresh != cmdline_mode->refresh)
+ continue;
+ }
+
+ if (cmdline_mode->interlace) {
+ if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+ continue;
+ } else if (prefer_non_interlace) {
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ continue;
+ }
+ return mode;
+ }
+
+ if (prefer_non_interlace) {
+ prefer_non_interlace = false;
+ goto again;
+ }
+
+create_mode:
+ mode = drm_mode_create_from_cmdline_mode(connector->dev, cmdline_mode);
+ if (mode)
+ list_add(&mode->head, &connector->modes);
+
+ return mode;
+}
+
+static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
+{
+ bool enable;
+
+ if (connector->display_info.non_desktop)
+ return false;
+
+ if (strict)
+ enable = connector->status == connector_status_connected;
+ else
+ enable = connector->status != connector_status_disconnected;
+
+ return enable;
+}
+
+static void drm_client_connectors_enabled(struct drm_connector **connectors,
+ unsigned int connector_count,
+ bool *enabled)
+{
+ bool any_enabled = false;
+ struct drm_connector *connector;
+ int i = 0;
+
+ for (i = 0; i < connector_count; i++) {
+ connector = connectors[i];
+ enabled[i] = drm_connector_enabled(connector, true);
+ DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
+ connector->display_info.non_desktop ? "non desktop" : enabled[i] ? "yes" : "no");
+
+ any_enabled |= enabled[i];
+ }
+
+ if (any_enabled)
+ return;
+
+ for (i = 0; i < connector_count; i++)
+ enabled[i] = drm_connector_enabled(connectors[i], false);
+}
+
+static bool drm_client_target_cloned(struct drm_device *dev,
+ struct drm_connector **connectors,
+ unsigned int connector_count,
+ struct drm_display_mode **modes,
+ struct drm_client_offset *offsets,
+ bool *enabled, int width, int height)
+{
+ int count, i, j;
+ bool can_clone = false;
+ struct drm_display_mode *dmt_mode, *mode;
+
+ /* only contemplate cloning in the single crtc case */
+ if (dev->mode_config.num_crtc > 1)
+ return false;
+
+ count = 0;
+ for (i = 0; i < connector_count; i++) {
+ if (enabled[i])
+ count++;
+ }
+
+ /* only contemplate cloning if more than one connector is enabled */
+ if (count <= 1)
+ return false;
+
+ /* check the command line or if nothing common pick 1024x768 */
+ can_clone = true;
+ for (i = 0; i < connector_count; i++) {
+ if (!enabled[i])
+ continue;
+ modes[i] = drm_connector_pick_cmdline_mode(connectors[i]);
+ if (!modes[i]) {
+ can_clone = false;
+ break;
+ }
+ for (j = 0; j < i; j++) {
+ if (!enabled[j])
+ continue;
+ if (!drm_mode_match(modes[j], modes[i],
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_CLOCK |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS))
+ can_clone = false;
+ }
+ }
+
+ if (can_clone) {
+ DRM_DEBUG_KMS("can clone using command line\n");
+ return true;
+ }
+
+ /* try and find a 1024x768 mode on each connector */
+ can_clone = true;
+ dmt_mode = drm_mode_find_dmt(dev, 1024, 768, 60, false);
+
+ if (!dmt_mode)
+ goto fail;
+
+ for (i = 0; i < connector_count; i++) {
+ if (!enabled[i])
+ continue;
+
+ list_for_each_entry(mode, &connectors[i]->modes, head) {
+ if (drm_mode_match(mode, dmt_mode,
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_CLOCK |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS))
+ modes[i] = mode;
+ }
+ if (!modes[i])
+ can_clone = false;
+ }
+ kfree(dmt_mode);
+
+ if (can_clone) {
+ DRM_DEBUG_KMS("can clone using 1024x768\n");
+ return true;
+ }
+fail:
+ DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
+ return false;
+}
+
+static int drm_client_get_tile_offsets(struct drm_connector **connectors,
+ unsigned int connector_count,
+ struct drm_display_mode **modes,
+ struct drm_client_offset *offsets,
+ int idx,
+ int h_idx, int v_idx)
+{
+ struct drm_connector *connector;
+ int i;
+ int hoffset = 0, voffset = 0;
+
+ for (i = 0; i < connector_count; i++) {
+ connector = connectors[i];
+ if (!connector->has_tile)
+ continue;
+
+ if (!modes[i] && (h_idx || v_idx)) {
+ DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
+ connector->base.id);
+ continue;
+ }
+ if (connector->tile_h_loc < h_idx)
+ hoffset += modes[i]->hdisplay;
+
+ if (connector->tile_v_loc < v_idx)
+ voffset += modes[i]->vdisplay;
+ }
+ offsets[idx].x = hoffset;
+ offsets[idx].y = voffset;
+ DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
+ return 0;
+}
+
+static bool drm_client_target_preferred(struct drm_connector **connectors,
+ unsigned int connector_count,
+ struct drm_display_mode **modes,
+ struct drm_client_offset *offsets,
+ bool *enabled, int width, int height)
+{
+ const u64 mask = BIT_ULL(connector_count) - 1;
+ struct drm_connector *connector;
+ u64 conn_configured = 0;
+ int tile_pass = 0;
+ int i;
+
+retry:
+ for (i = 0; i < connector_count; i++) {
+ connector = connectors[i];
+
+ if (conn_configured & BIT_ULL(i))
+ continue;
+
+ if (enabled[i] == false) {
+ conn_configured |= BIT_ULL(i);
+ continue;
+ }
+
+ /* first pass over all the untiled connectors */
+ if (tile_pass == 0 && connector->has_tile)
+ continue;
+
+ if (tile_pass == 1) {
+ if (connector->tile_h_loc != 0 ||
+ connector->tile_v_loc != 0)
+ continue;
+
+ } else {
+ if (connector->tile_h_loc != tile_pass - 1 &&
+ connector->tile_v_loc != tile_pass - 1)
+ /* if this tile_pass doesn't cover any of the tiles - keep going */
+ continue;
+
+ /*
+ * find the tile offsets for this pass - need to find
+ * all tiles left and above
+ */
+ drm_client_get_tile_offsets(connectors, connector_count, modes, offsets, i,
+ connector->tile_h_loc, connector->tile_v_loc);
+ }
+ DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
+ connector->base.id);
+
+ /* got for command line mode first */
+ modes[i] = drm_connector_pick_cmdline_mode(connector);
+ if (!modes[i]) {
+ DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
+ connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
+ modes[i] = drm_connector_has_preferred_mode(connector, width, height);
+ }
+ /* No preferred modes, pick one off the list */
+ if (!modes[i] && !list_empty(&connector->modes)) {
+ list_for_each_entry(modes[i], &connector->modes, head)
+ break;
+ }
+ DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
+ "none");
+ conn_configured |= BIT_ULL(i);
+ }
+
+ if ((conn_configured & mask) != mask) {
+ tile_pass++;
+ goto retry;
+ }
+ return true;
+}
+
+static bool connector_has_possible_crtc(struct drm_connector *connector,
+ struct drm_crtc *crtc)
+{
+ struct drm_encoder *encoder;
+ int i;
+
+ drm_connector_for_each_possible_encoder(connector, encoder, i) {
+ if (encoder->possible_crtcs & drm_crtc_mask(crtc))
+ return true;
+ }
+
+ return false;
+}
+
+static int drm_client_pick_crtcs(struct drm_client_dev *client,
+ struct drm_connector **connectors,
+ unsigned int connector_count,
+ struct drm_crtc **best_crtcs,
+ struct drm_display_mode **modes,
+ int n, int width, int height)
+{
+ struct drm_device *dev = client->dev;
+ struct drm_connector *connector;
+ int my_score, best_score, score;
+ struct drm_crtc **crtcs, *crtc;
+ struct drm_mode_set *modeset;
+ int o;
+
+ if (n == connector_count)
+ return 0;
+
+ connector = connectors[n];
+
+ best_crtcs[n] = NULL;
+ best_score = drm_client_pick_crtcs(client, connectors, connector_count,
+ best_crtcs, modes, n + 1, width, height);
+ if (modes[n] == NULL)
+ return best_score;
+
+ crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL);
+ if (!crtcs)
+ return best_score;
+
+ my_score = 1;
+ if (connector->status == connector_status_connected)
+ my_score++;
+ if (connector->cmdline_mode.specified)
+ my_score++;
+ if (drm_connector_has_preferred_mode(connector, width, height))
+ my_score++;
+
+ /*
+ * select a crtc for this connector and then attempt to configure
+ * remaining connectors
+ */
+ drm_client_for_each_modeset(modeset, client) {
+ crtc = modeset->crtc;
+
+ if (!connector_has_possible_crtc(connector, crtc))
+ continue;
+
+ for (o = 0; o < n; o++)
+ if (best_crtcs[o] == crtc)
+ break;
+
+ if (o < n) {
+ /* ignore cloning unless only a single crtc */
+ if (dev->mode_config.num_crtc > 1)
+ continue;
+
+ if (!drm_mode_equal(modes[o], modes[n]))
+ continue;
+ }
+
+ crtcs[n] = crtc;
+ memcpy(crtcs, best_crtcs, n * sizeof(*crtcs));
+ score = my_score + drm_client_pick_crtcs(client, connectors, connector_count,
+ crtcs, modes, n + 1, width, height);
+ if (score > best_score) {
+ best_score = score;
+ memcpy(best_crtcs, crtcs, connector_count * sizeof(*crtcs));
+ }
+ }
+
+ kfree(crtcs);
+ return best_score;
+}
+
+/* Try to read the BIOS display configuration and use it for the initial config */
+static bool drm_client_firmware_config(struct drm_client_dev *client,
+ struct drm_connector **connectors,
+ unsigned int connector_count,
+ struct drm_crtc **crtcs,
+ struct drm_display_mode **modes,
+ struct drm_client_offset *offsets,
+ bool *enabled, int width, int height)
+{
+ unsigned int count = min_t(unsigned int, connector_count, BITS_PER_LONG);
+ unsigned long conn_configured, conn_seq, mask;
+ struct drm_device *dev = client->dev;
+ int i, j;
+ bool *save_enabled;
+ bool fallback = true, ret = true;
+ int num_connectors_enabled = 0;
+ int num_connectors_detected = 0;
+ struct drm_modeset_acquire_ctx ctx;
+
+ if (!drm_drv_uses_atomic_modeset(dev))
+ return false;
+
+ save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
+ if (!save_enabled)
+ return false;
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ while (drm_modeset_lock_all_ctx(dev, &ctx) != 0)
+ drm_modeset_backoff(&ctx);
+
+ memcpy(save_enabled, enabled, count);
+ mask = GENMASK(count - 1, 0);
+ conn_configured = 0;
+retry:
+ conn_seq = conn_configured;
+ for (i = 0; i < count; i++) {
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct drm_crtc *new_crtc;
+
+ connector = connectors[i];
+
+ if (conn_configured & BIT(i))
+ continue;
+
+ if (conn_seq == 0 && !connector->has_tile)
+ continue;
+
+ if (connector->status == connector_status_connected)
+ num_connectors_detected++;
+
+ if (!enabled[i]) {
+ DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
+ connector->name);
+ conn_configured |= BIT(i);
+ continue;
+ }
+
+ if (connector->force == DRM_FORCE_OFF) {
+ DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
+ connector->name);
+ enabled[i] = false;
+ continue;
+ }
+
+ encoder = connector->state->best_encoder;
+ if (!encoder || WARN_ON(!connector->state->crtc)) {
+ if (connector->force > DRM_FORCE_OFF)
+ goto bail;
+
+ DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
+ connector->name);
+ enabled[i] = false;
+ conn_configured |= BIT(i);
+ continue;
+ }
+
+ num_connectors_enabled++;
+
+ new_crtc = connector->state->crtc;
+
+ /*
+ * Make sure we're not trying to drive multiple connectors
+ * with a single CRTC, since our cloning support may not
+ * match the BIOS.
+ */
+ for (j = 0; j < count; j++) {
+ if (crtcs[j] == new_crtc) {
+ DRM_DEBUG_KMS("fallback: cloned configuration\n");
+ goto bail;
+ }
+ }
+
+ DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
+ connector->name);
+
+ /* go for command line mode first */
+ modes[i] = drm_connector_pick_cmdline_mode(connector);
+
+ /* try for preferred next */
+ if (!modes[i]) {
+ DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
+ connector->name, connector->has_tile);
+ modes[i] = drm_connector_has_preferred_mode(connector, width, height);
+ }
+
+ /* No preferred mode marked by the EDID? Are there any modes? */
+ if (!modes[i] && !list_empty(&connector->modes)) {
+ DRM_DEBUG_KMS("using first mode listed on connector %s\n",
+ connector->name);
+ modes[i] = list_first_entry(&connector->modes,
+ struct drm_display_mode,
+ head);
+ }
+
+ /* last resort: use current mode */
+ if (!modes[i]) {
+ /*
+ * IMPORTANT: We want to use the adjusted mode (i.e.
+ * after the panel fitter upscaling) as the initial
+ * config, not the input mode, which is what crtc->mode
+ * usually contains. But since our current
+ * code puts a mode derived from the post-pfit timings
+ * into crtc->mode this works out correctly.
+ *
+ * This is crtc->mode and not crtc->state->mode for the
+ * fastboot check to work correctly.
+ */
+ DRM_DEBUG_KMS("looking for current mode on connector %s\n",
+ connector->name);
+ modes[i] = &connector->state->crtc->mode;
+ }
+ crtcs[i] = new_crtc;
+
+ DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
+ connector->name,
+ connector->state->crtc->base.id,
+ connector->state->crtc->name,
+ modes[i]->hdisplay, modes[i]->vdisplay,
+ modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
+
+ fallback = false;
+ conn_configured |= BIT(i);
+ }
+
+ if ((conn_configured & mask) != mask && conn_configured != conn_seq)
+ goto retry;
+
+ /*
+ * If the BIOS didn't enable everything it could, fall back to have the
+ * same user experiencing of lighting up as much as possible like the
+ * fbdev helper library.
+ */
+ if (num_connectors_enabled != num_connectors_detected &&
+ num_connectors_enabled < dev->mode_config.num_crtc) {
+ DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
+ DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
+ num_connectors_detected);
+ fallback = true;
+ }
+
+ if (fallback) {
+bail:
+ DRM_DEBUG_KMS("Not using firmware configuration\n");
+ memcpy(enabled, save_enabled, count);
+ ret = false;
+ }
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ kfree(save_enabled);
+ return ret;
+}
+
+/**
+ * drm_client_modeset_probe() - Probe for displays
+ * @client: DRM client
+ * @width: Maximum display mode width (optional)
+ * @height: Maximum display mode height (optional)
+ *
+ * This function sets up display pipelines for enabled connectors and stores the
+ * config in the client's modeset array.
+ *
+ * Returns:
+ * Zero on success or negative error code on failure.
+ */
+int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, unsigned int height)
+{
+ struct drm_connector *connector, **connectors = NULL;
+ struct drm_connector_list_iter conn_iter;
+ struct drm_device *dev = client->dev;
+ unsigned int total_modes_count = 0;
+ struct drm_client_offset *offsets;
+ unsigned int connector_count = 0;
+ /* points to modes protected by mode_config.mutex */
+ struct drm_display_mode **modes;
+ struct drm_crtc **crtcs;
+ int i, ret = 0;
+ bool *enabled;
+
+ DRM_DEBUG_KMS("\n");
+
+ if (!width)
+ width = dev->mode_config.max_width;
+ if (!height)
+ height = dev->mode_config.max_height;
+
+ drm_connector_list_iter_begin(dev, &conn_iter);
+ drm_client_for_each_connector_iter(connector, &conn_iter) {
+ struct drm_connector **tmp;
+
+ tmp = krealloc(connectors, (connector_count + 1) * sizeof(*connectors), GFP_KERNEL);
+ if (!tmp) {
+ ret = -ENOMEM;
+ goto free_connectors;
+ }
+
+ connectors = tmp;
+ drm_connector_get(connector);
+ connectors[connector_count++] = connector;
+ }
+ drm_connector_list_iter_end(&conn_iter);
+
+ if (!connector_count)
+ return 0;
+
+ crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL);
+ modes = kcalloc(connector_count, sizeof(*modes), GFP_KERNEL);
+ offsets = kcalloc(connector_count, sizeof(*offsets), GFP_KERNEL);
+ enabled = kcalloc(connector_count, sizeof(bool), GFP_KERNEL);
+ if (!crtcs || !modes || !enabled || !offsets) {
+ DRM_ERROR("Memory allocation failed\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mutex_lock(&client->modeset_mutex);
+
+ mutex_lock(&dev->mode_config.mutex);
+ for (i = 0; i < connector_count; i++)
+ total_modes_count += connectors[i]->funcs->fill_modes(connectors[i], width, height);
+ if (!total_modes_count)
+ DRM_DEBUG_KMS("No connectors reported connected with modes\n");
+ drm_client_connectors_enabled(connectors, connector_count, enabled);
+
+ if (!drm_client_firmware_config(client, connectors, connector_count, crtcs,
+ modes, offsets, enabled, width, height)) {
+ memset(modes, 0, connector_count * sizeof(*modes));
+ memset(crtcs, 0, connector_count * sizeof(*crtcs));
+ memset(offsets, 0, connector_count * sizeof(*offsets));
+
+ if (!drm_client_target_cloned(dev, connectors, connector_count, modes,
+ offsets, enabled, width, height) &&
+ !drm_client_target_preferred(connectors, connector_count, modes,
+ offsets, enabled, width, height))
+ DRM_ERROR("Unable to find initial modes\n");
+
+ DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
+ width, height);
+
+ drm_client_pick_crtcs(client, connectors, connector_count,
+ crtcs, modes, 0, width, height);
+ }
+
+ drm_client_modeset_release(client);
+
+ for (i = 0; i < connector_count; i++) {
+ struct drm_display_mode *mode = modes[i];
+ struct drm_crtc *crtc = crtcs[i];
+ struct drm_client_offset *offset = &offsets[i];
+
+ if (mode && crtc) {
+ struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
+ struct drm_connector *connector = connectors[i];
+
+ DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
+ mode->name, crtc->base.id, offset->x, offset->y);
+
+ if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
+ (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
+ ret = -EINVAL;
+ break;
+ }
+
+ kfree(modeset->mode);
+ modeset->mode = drm_mode_duplicate(dev, mode);
+ if (!modeset->mode) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ drm_connector_get(connector);
+ modeset->connectors[modeset->num_connectors++] = connector;
+ modeset->x = offset->x;
+ modeset->y = offset->y;
+ }
+ }
+ mutex_unlock(&dev->mode_config.mutex);
+
+ mutex_unlock(&client->modeset_mutex);
+out:
+ kfree(crtcs);
+ kfree(modes);
+ kfree(offsets);
+ kfree(enabled);
+free_connectors:
+ for (i = 0; i < connector_count; i++)
+ drm_connector_put(connectors[i]);
+ kfree(connectors);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_client_modeset_probe);
+
+/**
+ * drm_client_rotation() - Check the initial rotation value
+ * @modeset: DRM modeset
+ * @rotation: Returned rotation value
+ *
+ * This function checks if the primary plane in @modeset can hw rotate
+ * to match the rotation needed on its connector.
+ *
+ * Note: Currently only 0 and 180 degrees are supported.
+ *
+ * Return:
+ * True if the plane can do the rotation, false otherwise.
+ */
+bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation)
+{
+ struct drm_connector *connector = modeset->connectors[0];
+ struct drm_plane *plane = modeset->crtc->primary;
+ struct drm_cmdline_mode *cmdline;
+ u64 valid_mask = 0;
+ unsigned int i;
+
+ if (!modeset->num_connectors)
+ return false;
+
+ switch (connector->display_info.panel_orientation) {
+ case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+ *rotation = DRM_MODE_ROTATE_180;
+ break;
+ case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+ *rotation = DRM_MODE_ROTATE_90;
+ break;
+ case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+ *rotation = DRM_MODE_ROTATE_270;
+ break;
+ default:
+ *rotation = DRM_MODE_ROTATE_0;
+ }
+
+ /**
+ * The panel already defined the default rotation
+ * through its orientation. Whatever has been provided
+ * on the command line needs to be added to that.
+ *
+ * Unfortunately, the rotations are at different bit
+ * indices, so the math to add them up are not as
+ * trivial as they could.
+ *
+ * Reflections on the other hand are pretty trivial to deal with, a
+ * simple XOR between the two handle the addition nicely.
+ */
+ cmdline = &connector->cmdline_mode;
+ if (cmdline->specified && cmdline->rotation_reflection) {
+ unsigned int cmdline_rest, panel_rest;
+ unsigned int cmdline_rot, panel_rot;
+ unsigned int sum_rot, sum_rest;
+
+ panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK);
+ cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK);
+ sum_rot = (panel_rot + cmdline_rot) % 4;
+
+ panel_rest = *rotation & ~DRM_MODE_ROTATE_MASK;
+ cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK;
+ sum_rest = panel_rest ^ cmdline_rest;
+
+ *rotation = (1 << sum_rot) | sum_rest;
+ }
+
+ /*
+ * TODO: support 90 / 270 degree hardware rotation,
+ * depending on the hardware this may require the framebuffer
+ * to be in a specific tiling format.
+ */
+ if (((*rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_0 &&
+ (*rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_180) ||
+ !plane->rotation_property)
+ return false;
+
+ for (i = 0; i < plane->rotation_property->num_values; i++)
+ valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+ if (!(*rotation & valid_mask))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL(drm_client_rotation);
+
+static int drm_client_modeset_commit_atomic(struct drm_client_dev *client, bool active)
+{
+ struct drm_device *dev = client->dev;
+ struct drm_plane *plane;
+ struct drm_atomic_state *state;
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_mode_set *mode_set;
+ int ret;
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ state = drm_atomic_state_alloc(dev);
+ if (!state) {
+ ret = -ENOMEM;
+ goto out_ctx;
+ }
+
+ state->acquire_ctx = &ctx;
+retry:
+ drm_for_each_plane(plane, dev) {
+ struct drm_plane_state *plane_state;
+
+ plane_state = drm_atomic_get_plane_state(state, plane);
+ if (IS_ERR(plane_state)) {
+ ret = PTR_ERR(plane_state);
+ goto out_state;
+ }
+
+ plane_state->rotation = DRM_MODE_ROTATE_0;
+
+ /* disable non-primary: */
+ if (plane->type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ ret = __drm_atomic_helper_disable_plane(plane, plane_state);
+ if (ret != 0)
+ goto out_state;
+ }
+
+ drm_client_for_each_modeset(mode_set, client) {
+ struct drm_plane *primary = mode_set->crtc->primary;
+ unsigned int rotation;
+
+ if (drm_client_rotation(mode_set, &rotation)) {
+ struct drm_plane_state *plane_state;
+
+ /* Cannot fail as we've already gotten the plane state above */
+ plane_state = drm_atomic_get_new_plane_state(state, primary);
+ plane_state->rotation = rotation;
+ }
+
+ ret = __drm_atomic_helper_set_config(mode_set, state);
+ if (ret != 0)
+ goto out_state;
+
+ /*
+ * __drm_atomic_helper_set_config() sets active when a
+ * mode is set, unconditionally clear it if we force DPMS off
+ */
+ if (!active) {
+ struct drm_crtc *crtc = mode_set->crtc;
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+ crtc_state->active = false;
+ }
+ }
+
+ ret = drm_atomic_commit(state);
+
+out_state:
+ if (ret == -EDEADLK)
+ goto backoff;
+
+ drm_atomic_state_put(state);
+out_ctx:
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ return ret;
+
+backoff:
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(&ctx);
+
+ goto retry;
+}
+
+static int drm_client_modeset_commit_legacy(struct drm_client_dev *client)
+{
+ struct drm_device *dev = client->dev;
+ struct drm_mode_set *mode_set;
+ struct drm_plane *plane;
+ int ret = 0;
+
+ drm_modeset_lock_all(dev);
+ drm_for_each_plane(plane, dev) {
+ if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+ drm_plane_force_disable(plane);
+
+ if (plane->rotation_property)
+ drm_mode_plane_set_obj_prop(plane,
+ plane->rotation_property,
+ DRM_MODE_ROTATE_0);
+ }
+
+ drm_client_for_each_modeset(mode_set, client) {
+ struct drm_crtc *crtc = mode_set->crtc;
+
+ if (crtc->funcs->cursor_set2) {
+ ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
+ if (ret)
+ goto out;
+ } else if (crtc->funcs->cursor_set) {
+ ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
+ if (ret)
+ goto out;
+ }
+
+ ret = drm_mode_set_config_internal(mode_set);
+ if (ret)
+ goto out;
+ }
+out:
+ drm_modeset_unlock_all(dev);
+
+ return ret;
+}
+
+/**
+ * drm_client_modeset_commit_force() - Force commit CRTC configuration
+ * @client: DRM client
+ *
+ * Commit modeset configuration to crtcs without checking if there is a DRM master.
+ *
+ * Returns:
+ * Zero on success or negative error code on failure.
+ */
+int drm_client_modeset_commit_force(struct drm_client_dev *client)
+{
+ struct drm_device *dev = client->dev;
+ int ret;
+
+ mutex_lock(&client->modeset_mutex);
+ if (drm_drv_uses_atomic_modeset(dev))
+ ret = drm_client_modeset_commit_atomic(client, true);
+ else
+ ret = drm_client_modeset_commit_legacy(client);
+ mutex_unlock(&client->modeset_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_client_modeset_commit_force);
+
+/**
+ * drm_client_modeset_commit() - Commit CRTC configuration
+ * @client: DRM client
+ *
+ * Commit modeset configuration to crtcs.
+ *
+ * Returns:
+ * Zero on success or negative error code on failure.
+ */
+int drm_client_modeset_commit(struct drm_client_dev *client)
+{
+ struct drm_device *dev = client->dev;
+ int ret;
+
+ if (!drm_master_internal_acquire(dev))
+ return -EBUSY;
+
+ ret = drm_client_modeset_commit_force(client);
+
+ drm_master_internal_release(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_client_modeset_commit);
+
+static void drm_client_modeset_dpms_legacy(struct drm_client_dev *client, int dpms_mode)
+{
+ struct drm_device *dev = client->dev;
+ struct drm_connector *connector;
+ struct drm_mode_set *modeset;
+ int j;
+
+ drm_modeset_lock_all(dev);
+ drm_client_for_each_modeset(modeset, client) {
+ if (!modeset->crtc->enabled)
+ continue;
+
+ for (j = 0; j < modeset->num_connectors; j++) {
+ connector = modeset->connectors[j];
+ connector->funcs->dpms(connector, dpms_mode);
+ drm_object_property_set_value(&connector->base,
+ dev->mode_config.dpms_property, dpms_mode);
+ }
+ }
+ drm_modeset_unlock_all(dev);
+}
+
+/**
+ * drm_client_modeset_dpms() - Set DPMS mode
+ * @client: DRM client
+ * @mode: DPMS mode
+ *
+ * Note: For atomic drivers @mode is reduced to on/off.
+ *
+ * Returns:
+ * Zero on success or negative error code on failure.
+ */
+int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
+{
+ struct drm_device *dev = client->dev;
+ int ret = 0;
+
+ if (!drm_master_internal_acquire(dev))
+ return -EBUSY;
+
+ mutex_lock(&client->modeset_mutex);
+ if (drm_drv_uses_atomic_modeset(dev))
+ ret = drm_client_modeset_commit_atomic(client, mode == DRM_MODE_DPMS_ON);
+ else
+ drm_client_modeset_dpms_legacy(client, mode);
+ mutex_unlock(&client->modeset_mutex);
+
+ drm_master_internal_release(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_client_modeset_dpms);