ASR_BASE

Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/gpu/drm/i915/Kconfig.debug b/marvell/linux/drivers/gpu/drm/i915/Kconfig.debug
new file mode 100644
index 0000000..e4f03fc
--- /dev/null
+++ b/marvell/linux/drivers/gpu/drm/i915/Kconfig.debug
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_I915_WERROR
+        bool "Force GCC to throw an error instead of a warning when compiling"
+        # As this may inadvertently break the build, only allow the user
+        # to shoot oneself in the foot iff they aim really hard
+        depends on EXPERT
+        # We use the dependency on !COMPILE_TEST to not be enabled in
+        # allmodconfig or allyesconfig configurations
+        depends on !COMPILE_TEST
+        default n
+        help
+          Add -Werror to the build flags for (and only for) i915.ko.
+          Do not enable this unless you are writing code for the i915.ko module.
+
+          Recommended for driver developers only.
+
+          If in doubt, say "N".
+
+config DRM_I915_DEBUG
+        bool "Enable additional driver debugging"
+        depends on DRM_I915
+        select DEBUG_FS
+        select PREEMPT_COUNT
+        select I2C_CHARDEV
+        select STACKDEPOT
+        select DRM_DP_AUX_CHARDEV
+        select X86_MSR # used by igt/pm_rpm
+        select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks)
+        select DRM_DEBUG_MM if DRM=y
+	select DRM_DEBUG_SELFTEST
+	select DMABUF_SELFTESTS
+	select SW_SYNC # signaling validation framework (igt/syncobj*)
+	select DRM_I915_SW_FENCE_DEBUG_OBJECTS
+	select DRM_I915_SELFTEST
+	select DRM_I915_DEBUG_RUNTIME_PM
+	select DRM_I915_DEBUG_MMIO
+        default n
+        help
+          Choose this option to turn on extra driver debugging that may affect
+          performance but will catch some internal issues.
+
+          Recommended for driver developers only.
+
+          If in doubt, say "N".
+
+config DRM_I915_DEBUG_MMIO
+	bool "Always insert extra checks around mmio access by default"
+	default n
+	help
+	  By default, always enables the extra sanity checks (extra register
+	  reads) around every mmio (register) access that will slow the system
+	  down. This sets the default value of i915.mmio_debug to -1 and can
+	  be overridden at module load.
+
+	  Recommended for driver developers only.
+
+	  If in doubt, say "N".
+
+config DRM_I915_DEBUG_GEM
+        bool "Insert extra checks into the GEM internals"
+        default n
+        depends on DRM_I915_WERROR
+        help
+          Enable extra sanity checks (including BUGs) along the GEM driver
+          paths that may slow the system down and if hit hang the machine.
+
+          Recommended for driver developers only.
+
+          If in doubt, say "N".
+
+config DRM_I915_ERRLOG_GEM
+	bool "Insert extra logging (very verbose) for common GEM errors"
+	default n
+	depends on DRM_I915_DEBUG_GEM
+	help
+	  Enable additional logging that may help track down the cause of
+	  principally userspace errors.
+
+	  Recommended for driver developers only.
+
+	  If in doubt, say "N".
+
+config DRM_I915_TRACE_GEM
+	bool "Insert extra ftrace output from the GEM internals"
+	depends on DRM_I915_DEBUG_GEM
+	select TRACING
+	default n
+	help
+	  Enable additional and verbose debugging output that will spam
+	  ordinary tests, but may be vital for post-mortem debugging when
+	  used with /proc/sys/kernel/ftrace_dump_on_oops
+
+	  Recommended for driver developers only.
+
+	  If in doubt, say "N".
+
+config DRM_I915_TRACE_GTT
+	bool "Insert extra ftrace output from the GTT internals"
+	depends on DRM_I915_DEBUG_GEM
+	select TRACING
+	default n
+	help
+	  Enable additional and verbose debugging output that will spam
+	  ordinary tests, but may be vital for post-mortem debugging when
+	  used with /proc/sys/kernel/ftrace_dump_on_oops
+
+	  Recommended for driver developers only.
+
+	  If in doubt, say "N".
+
+config DRM_I915_SW_FENCE_DEBUG_OBJECTS
+        bool "Enable additional driver debugging for fence objects"
+        depends on DRM_I915
+        select DEBUG_OBJECTS
+        default n
+        help
+          Choose this option to turn on extra driver debugging that may affect
+          performance but will catch some internal issues.
+
+          Recommended for driver developers only.
+
+          If in doubt, say "N".
+
+config DRM_I915_SW_FENCE_CHECK_DAG
+        bool "Enable additional driver debugging for detecting dependency cycles"
+        depends on DRM_I915
+        default n
+        help
+          Choose this option to turn on extra driver debugging that may affect
+          performance but will catch some internal issues.
+
+          Recommended for driver developers only.
+
+          If in doubt, say "N".
+
+config DRM_I915_DEBUG_GUC
+        bool "Enable additional driver debugging for GuC"
+        depends on DRM_I915
+        default n
+        help
+          Choose this option to turn on extra driver debugging that may affect
+          performance but will help resolve GuC related issues.
+
+          Recommended for driver developers only.
+
+          If in doubt, say "N".
+
+config DRM_I915_SELFTEST
+	bool "Enable selftests upon driver load"
+	depends on DRM_I915
+	default n
+	select FAULT_INJECTION
+	select PRIME_NUMBERS
+	help
+	  Choose this option to allow the driver to perform selftests upon
+	  loading; also requires the i915.selftest=1 module parameter. To
+	  exit the module after running the selftests (i.e. to prevent normal
+	  module initialisation afterwards) use i915.selftest=-1.
+
+	  Recommended for driver developers only.
+
+	  If in doubt, say "N".
+
+config DRM_I915_SELFTEST_BROKEN
+	bool "Enable broken and dangerous selftests"
+	depends on DRM_I915_SELFTEST
+	depends on BROKEN
+	default n
+	help
+	  This option enables the execution of selftests that are "dangerous"
+	  and may trigger unintended HW side-effects as they break strict
+	  rules given in the HW specification. For science.
+
+	  Recommended for masochistic driver developers only.
+
+	  If in doubt, say "N".
+
+config DRM_I915_LOW_LEVEL_TRACEPOINTS
+        bool "Enable low level request tracing events"
+        depends on DRM_I915
+        default n
+        help
+          Choose this option to turn on low level request tracing events.
+          This provides the ability to precisely monitor engine utilisation
+          and also analyze the request dependency resolving timeline.
+
+          If in doubt, say "N".
+
+config DRM_I915_DEBUG_VBLANK_EVADE
+	bool "Enable extra debug warnings for vblank evasion"
+	depends on DRM_I915
+	default n
+	help
+	  Choose this option to turn on extra debug warnings for the
+	  vblank evade mechanism. This gives a warning every time the
+	  the deadline allotted for the vblank evade critical section
+	  is exceeded, even if there isn't an actual risk of missing
+	  the vblank.
+
+	  If in doubt, say "N".
+
+config DRM_I915_DEBUG_RUNTIME_PM
+	bool "Enable extra state checking for runtime PM"
+	depends on DRM_I915
+	default n
+	select STACKDEPOT
+	help
+	  Choose this option to turn on extra state checking for the
+	  runtime PM functionality. This may introduce overhead during
+	  driver loading, suspend and resume operations.
+
+	  If in doubt, say "N"