ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/gpu/drm/sun4i/sun4i_tcon.c b/marvell/linux/drivers/gpu/drm/sun4i/sun4i_tcon.c
new file mode 100644
index 0000000..193c7f9
--- /dev/null
+++ b/marvell/linux/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -0,0 +1,1535 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Free Electrons
+ * Copyright (C) 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/component.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <uapi/drm/drm_mode.h>
+
+#include "sun4i_crtc.h"
+#include "sun4i_dotclock.h"
+#include "sun4i_drv.h"
+#include "sun4i_lvds.h"
+#include "sun4i_rgb.h"
+#include "sun4i_tcon.h"
+#include "sun6i_mipi_dsi.h"
+#include "sun8i_tcon_top.h"
+#include "sunxi_engine.h"
+
+static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder)
+{
+ struct drm_connector *connector;
+ struct drm_connector_list_iter iter;
+
+ drm_connector_list_iter_begin(encoder->dev, &iter);
+ drm_for_each_connector_iter(connector, &iter)
+ if (connector->encoder == encoder) {
+ drm_connector_list_iter_end(&iter);
+ return connector;
+ }
+ drm_connector_list_iter_end(&iter);
+
+ return NULL;
+}
+
+static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder)
+{
+ struct drm_connector *connector;
+ struct drm_display_info *info;
+
+ connector = sun4i_tcon_get_connector(encoder);
+ if (!connector)
+ return -EINVAL;
+
+ info = &connector->display_info;
+ if (info->num_bus_formats != 1)
+ return -EINVAL;
+
+ switch (info->bus_formats[0]) {
+ case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+ return 18;
+
+ case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+ case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
+ return 24;
+ }
+
+ return -EINVAL;
+}
+
+static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
+ bool enabled)
+{
+ struct clk *clk;
+
+ switch (channel) {
+ case 0:
+ WARN_ON(!tcon->quirks->has_channel_0);
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+ SUN4I_TCON0_CTL_TCON_ENABLE,
+ enabled ? SUN4I_TCON0_CTL_TCON_ENABLE : 0);
+ clk = tcon->dclk;
+ break;
+ case 1:
+ WARN_ON(!tcon->quirks->has_channel_1);
+ regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+ SUN4I_TCON1_CTL_TCON_ENABLE,
+ enabled ? SUN4I_TCON1_CTL_TCON_ENABLE : 0);
+ clk = tcon->sclk1;
+ break;
+ default:
+ DRM_WARN("Unknown channel... doing nothing\n");
+ return;
+ }
+
+ if (enabled) {
+ clk_prepare_enable(clk);
+ clk_rate_exclusive_get(clk);
+ } else {
+ clk_rate_exclusive_put(clk);
+ clk_disable_unprepare(clk);
+ }
+}
+
+static void sun4i_tcon_lvds_set_status(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder,
+ bool enabled)
+{
+ if (enabled) {
+ u8 val;
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
+ SUN4I_TCON0_LVDS_IF_EN,
+ SUN4I_TCON0_LVDS_IF_EN);
+
+ /*
+ * As their name suggest, these values only apply to the A31
+ * and later SoCs. We'll have to rework this when merging
+ * support for the older SoCs.
+ */
+ regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+ SUN6I_TCON0_LVDS_ANA0_C(2) |
+ SUN6I_TCON0_LVDS_ANA0_V(3) |
+ SUN6I_TCON0_LVDS_ANA0_PD(2) |
+ SUN6I_TCON0_LVDS_ANA0_EN_LDO);
+ udelay(2);
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+ SUN6I_TCON0_LVDS_ANA0_EN_MB,
+ SUN6I_TCON0_LVDS_ANA0_EN_MB);
+ udelay(2);
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+ SUN6I_TCON0_LVDS_ANA0_EN_DRVC,
+ SUN6I_TCON0_LVDS_ANA0_EN_DRVC);
+
+ if (sun4i_tcon_get_pixel_depth(encoder) == 18)
+ val = 7;
+ else
+ val = 0xf;
+
+ regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+ SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
+ SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val));
+ } else {
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
+ SUN4I_TCON0_LVDS_IF_EN, 0);
+ }
+}
+
+void sun4i_tcon_set_status(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder,
+ bool enabled)
+{
+ bool is_lvds = false;
+ int channel;
+
+ switch (encoder->encoder_type) {
+ case DRM_MODE_ENCODER_LVDS:
+ is_lvds = true;
+ /* Fallthrough */
+ case DRM_MODE_ENCODER_DSI:
+ case DRM_MODE_ENCODER_NONE:
+ channel = 0;
+ break;
+ case DRM_MODE_ENCODER_TMDS:
+ case DRM_MODE_ENCODER_TVDAC:
+ channel = 1;
+ break;
+ default:
+ DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
+ return;
+ }
+
+ if (is_lvds && !enabled)
+ sun4i_tcon_lvds_set_status(tcon, encoder, false);
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+ SUN4I_TCON_GCTL_TCON_ENABLE,
+ enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0);
+
+ if (is_lvds && enabled)
+ sun4i_tcon_lvds_set_status(tcon, encoder, true);
+
+ sun4i_tcon_channel_set_status(tcon, channel, enabled);
+}
+
+void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable)
+{
+ u32 mask, val = 0;
+
+ DRM_DEBUG_DRIVER("%sabling VBLANK interrupt\n", enable ? "En" : "Dis");
+
+ mask = SUN4I_TCON_GINT0_VBLANK_ENABLE(0) |
+ SUN4I_TCON_GINT0_VBLANK_ENABLE(1) |
+ SUN4I_TCON_GINT0_TCON0_TRI_FINISH_ENABLE;
+
+ if (enable)
+ val = mask;
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG, mask, val);
+}
+EXPORT_SYMBOL(sun4i_tcon_enable_vblank);
+
+/*
+ * This function is a helper for TCON output muxing. The TCON output
+ * muxing control register in earlier SoCs (without the TCON TOP block)
+ * are located in TCON0. This helper returns a pointer to TCON0's
+ * sun4i_tcon structure, or NULL if not found.
+ */
+static struct sun4i_tcon *sun4i_get_tcon0(struct drm_device *drm)
+{
+ struct sun4i_drv *drv = drm->dev_private;
+ struct sun4i_tcon *tcon;
+
+ list_for_each_entry(tcon, &drv->tcon_list, list)
+ if (tcon->id == 0)
+ return tcon;
+
+ dev_warn(drm->dev,
+ "TCON0 not found, display output muxing may not work\n");
+
+ return NULL;
+}
+
+static void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel,
+ const struct drm_encoder *encoder)
+{
+ int ret = -ENOTSUPP;
+
+ if (tcon->quirks->set_mux)
+ ret = tcon->quirks->set_mux(tcon, encoder);
+
+ DRM_DEBUG_DRIVER("Muxing encoder %s to CRTC %s: %d\n",
+ encoder->name, encoder->crtc->name, ret);
+}
+
+static int sun4i_tcon_get_clk_delay(const struct drm_display_mode *mode,
+ int channel)
+{
+ int delay = mode->vtotal - mode->vdisplay;
+
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ delay /= 2;
+
+ if (channel == 1)
+ delay -= 2;
+
+ delay = min(delay, 30);
+
+ DRM_DEBUG_DRIVER("TCON %d clock delay %u\n", channel, delay);
+
+ return delay;
+}
+
+static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
+ const struct drm_display_mode *mode)
+{
+ /* Configure the dot clock */
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+
+ /* Set the resolution */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+}
+
+static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
+ const struct drm_connector *connector)
+{
+ u32 bus_format = 0;
+ u32 val = 0;
+
+ /* XXX Would this ever happen? */
+ if (!connector)
+ return;
+
+ /*
+ * FIXME: Undocumented bits
+ *
+ * The whole dithering process and these parameters are not
+ * explained in the vendor documents or BSP kernel code.
+ */
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
+ regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
+
+ /* Do dithering if panel only supports 6 bits per color */
+ if (connector->display_info.bpc == 6)
+ val |= SUN4I_TCON0_FRM_CTL_EN;
+
+ if (connector->display_info.num_bus_formats == 1)
+ bus_format = connector->display_info.bus_formats[0];
+
+ /* Check the connection format */
+ switch (bus_format) {
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ /* R and B components are only 5 bits deep */
+ val |= SUN4I_TCON0_FRM_CTL_MODE_R;
+ val |= SUN4I_TCON0_FRM_CTL_MODE_B;
+ /* Fall through */
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+ /* Fall through: enable dithering */
+ val |= SUN4I_TCON0_FRM_CTL_EN;
+ break;
+ }
+
+ /* Write dithering settings */
+ regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
+}
+
+static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder,
+ const struct drm_display_mode *mode)
+{
+ /* TODO support normal CPU interface modes */
+ struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
+ struct mipi_dsi_device *device = dsi->device;
+ u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
+ u8 lanes = device->lanes;
+ u32 block_space, start_delay;
+ u32 tcon_div;
+
+ tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
+ tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
+
+ sun4i_tcon0_mode_set_common(tcon, mode);
+
+ /* Set dithering if needed */
+ sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+ SUN4I_TCON0_CTL_IF_MASK,
+ SUN4I_TCON0_CTL_IF_8080);
+
+ regmap_write(tcon->regs, SUN4I_TCON_ECC_FIFO_REG,
+ SUN4I_TCON_ECC_FIFO_EN);
+
+ regmap_write(tcon->regs, SUN4I_TCON0_CPU_IF_REG,
+ SUN4I_TCON0_CPU_IF_MODE_DSI |
+ SUN4I_TCON0_CPU_IF_TRI_FIFO_FLUSH |
+ SUN4I_TCON0_CPU_IF_TRI_FIFO_EN |
+ SUN4I_TCON0_CPU_IF_TRI_EN);
+
+ /*
+ * This looks suspicious, but it works...
+ *
+ * The datasheet says that this should be set higher than 20 *
+ * pixel cycle, but it's not clear what a pixel cycle is.
+ */
+ regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
+ tcon_div &= GENMASK(6, 0);
+ block_space = mode->htotal * bpp / (tcon_div * lanes);
+ block_space -= mode->hdisplay + 40;
+
+ regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
+ SUN4I_TCON0_CPU_TRI0_BLOCK_SPACE(block_space) |
+ SUN4I_TCON0_CPU_TRI0_BLOCK_SIZE(mode->hdisplay));
+
+ regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI1_REG,
+ SUN4I_TCON0_CPU_TRI1_BLOCK_NUM(mode->vdisplay));
+
+ start_delay = (mode->crtc_vtotal - mode->crtc_vdisplay - 10 - 1);
+ start_delay = start_delay * mode->crtc_htotal * 149;
+ start_delay = start_delay / (mode->crtc_clock / 1000) / 8;
+ regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI2_REG,
+ SUN4I_TCON0_CPU_TRI2_TRANS_START_SET(10) |
+ SUN4I_TCON0_CPU_TRI2_START_DELAY(start_delay));
+
+ /*
+ * The Allwinner BSP has a comment that the period should be
+ * the display clock * 15, but uses an hardcoded 3000...
+ */
+ regmap_write(tcon->regs, SUN4I_TCON_SAFE_PERIOD_REG,
+ SUN4I_TCON_SAFE_PERIOD_NUM(3000) |
+ SUN4I_TCON_SAFE_PERIOD_MODE(3));
+
+ /* Enable the output on the pins */
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG,
+ 0xe0000000);
+}
+
+static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder,
+ const struct drm_display_mode *mode)
+{
+ unsigned int bp;
+ u8 clk_delay;
+ u32 reg, val = 0;
+
+ WARN_ON(!tcon->quirks->has_channel_0);
+
+ tcon->dclk_min_div = 7;
+ tcon->dclk_max_div = 7;
+ sun4i_tcon0_mode_set_common(tcon, mode);
+
+ /* Set dithering if needed */
+ sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
+ /* Adjust clock delay */
+ clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+ SUN4I_TCON0_CTL_CLK_DELAY_MASK,
+ SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
+
+ /*
+ * This is called a backporch in the register documentation,
+ * but it really is the back porch + hsync
+ */
+ bp = mode->crtc_htotal - mode->crtc_hsync_start;
+ DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
+ mode->crtc_htotal, bp);
+
+ /* Set horizontal display timings */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
+ SUN4I_TCON0_BASIC1_H_TOTAL(mode->htotal) |
+ SUN4I_TCON0_BASIC1_H_BACKPORCH(bp));
+
+ /*
+ * This is called a backporch in the register documentation,
+ * but it really is the back porch + hsync
+ */
+ bp = mode->crtc_vtotal - mode->crtc_vsync_start;
+ DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
+ mode->crtc_vtotal, bp);
+
+ /* Set vertical display timings */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
+ SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
+ SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
+
+ reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 |
+ SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL |
+ SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL;
+ if (sun4i_tcon_get_pixel_depth(encoder) == 24)
+ reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS;
+ else
+ reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS;
+
+ regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg);
+
+ /* Setup the polarity of the various signals */
+ if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
+ val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+ if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
+ val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val);
+
+ /* Map output pins to channel 0 */
+ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+ SUN4I_TCON_GCTL_IOMAP_MASK,
+ SUN4I_TCON_GCTL_IOMAP_TCON0);
+
+ /* Enable the output on the pins */
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000);
+}
+
+static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder,
+ const struct drm_display_mode *mode)
+{
+ struct drm_connector *connector = sun4i_tcon_get_connector(encoder);
+ const struct drm_display_info *info = &connector->display_info;
+ unsigned int bp, hsync, vsync;
+ u8 clk_delay;
+ u32 val = 0;
+
+ WARN_ON(!tcon->quirks->has_channel_0);
+
+ tcon->dclk_min_div = tcon->quirks->dclk_min_div;
+ tcon->dclk_max_div = 127;
+ sun4i_tcon0_mode_set_common(tcon, mode);
+
+ /* Set dithering if needed */
+ sun4i_tcon0_mode_set_dithering(tcon, connector);
+
+ /* Adjust clock delay */
+ clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+ SUN4I_TCON0_CTL_CLK_DELAY_MASK,
+ SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
+
+ /*
+ * This is called a backporch in the register documentation,
+ * but it really is the back porch + hsync
+ */
+ bp = mode->crtc_htotal - mode->crtc_hsync_start;
+ DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
+ mode->crtc_htotal, bp);
+
+ /* Set horizontal display timings */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
+ SUN4I_TCON0_BASIC1_H_TOTAL(mode->crtc_htotal) |
+ SUN4I_TCON0_BASIC1_H_BACKPORCH(bp));
+
+ /*
+ * This is called a backporch in the register documentation,
+ * but it really is the back porch + hsync
+ */
+ bp = mode->crtc_vtotal - mode->crtc_vsync_start;
+ DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
+ mode->crtc_vtotal, bp);
+
+ /* Set vertical display timings */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
+ SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
+ SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
+
+ /* Set Hsync and Vsync length */
+ hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
+ vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC3_REG,
+ SUN4I_TCON0_BASIC3_V_SYNC(vsync) |
+ SUN4I_TCON0_BASIC3_H_SYNC(hsync));
+
+ /* Setup the polarity of the various signals */
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+ if (info->bus_flags & DRM_BUS_FLAG_DE_LOW)
+ val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE;
+
+ if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+ val |= SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE;
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
+ SUN4I_TCON0_IO_POL_HSYNC_POSITIVE |
+ SUN4I_TCON0_IO_POL_VSYNC_POSITIVE |
+ SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE |
+ SUN4I_TCON0_IO_POL_DE_NEGATIVE,
+ val);
+
+ /* Map output pins to channel 0 */
+ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+ SUN4I_TCON_GCTL_IOMAP_MASK,
+ SUN4I_TCON_GCTL_IOMAP_TCON0);
+
+ /* Enable the output on the pins */
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0);
+}
+
+static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
+ const struct drm_display_mode *mode)
+{
+ unsigned int bp, hsync, vsync, vtotal;
+ u8 clk_delay;
+ u32 val;
+
+ WARN_ON(!tcon->quirks->has_channel_1);
+
+ /* Configure the dot clock */
+ clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
+
+ /* Adjust clock delay */
+ clk_delay = sun4i_tcon_get_clk_delay(mode, 1);
+ regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+ SUN4I_TCON1_CTL_CLK_DELAY_MASK,
+ SUN4I_TCON1_CTL_CLK_DELAY(clk_delay));
+
+ /* Set interlaced mode */
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ val = SUN4I_TCON1_CTL_INTERLACE_ENABLE;
+ else
+ val = 0;
+ regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+ SUN4I_TCON1_CTL_INTERLACE_ENABLE,
+ val);
+
+ /* Set the input resolution */
+ regmap_write(tcon->regs, SUN4I_TCON1_BASIC0_REG,
+ SUN4I_TCON1_BASIC0_X(mode->crtc_hdisplay) |
+ SUN4I_TCON1_BASIC0_Y(mode->crtc_vdisplay));
+
+ /* Set the upscaling resolution */
+ regmap_write(tcon->regs, SUN4I_TCON1_BASIC1_REG,
+ SUN4I_TCON1_BASIC1_X(mode->crtc_hdisplay) |
+ SUN4I_TCON1_BASIC1_Y(mode->crtc_vdisplay));
+
+ /* Set the output resolution */
+ regmap_write(tcon->regs, SUN4I_TCON1_BASIC2_REG,
+ SUN4I_TCON1_BASIC2_X(mode->crtc_hdisplay) |
+ SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
+
+ /* Set horizontal display timings */
+ bp = mode->crtc_htotal - mode->crtc_hsync_start;
+ DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
+ mode->htotal, bp);
+ regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
+ SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) |
+ SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
+
+ bp = mode->crtc_vtotal - mode->crtc_vsync_start;
+ DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
+ mode->crtc_vtotal, bp);
+
+ /*
+ * The vertical resolution needs to be doubled in all
+ * cases. We could use crtc_vtotal and always multiply by two,
+ * but that leads to a rounding error in interlace when vtotal
+ * is odd.
+ *
+ * This happens with TV's PAL for example, where vtotal will
+ * be 625, crtc_vtotal 312, and thus crtc_vtotal * 2 will be
+ * 624, which apparently confuses the hardware.
+ *
+ * To work around this, we will always use vtotal, and
+ * multiply by two only if we're not in interlace.
+ */
+ vtotal = mode->vtotal;
+ if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+ vtotal = vtotal * 2;
+
+ /* Set vertical display timings */
+ regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
+ SUN4I_TCON1_BASIC4_V_TOTAL(vtotal) |
+ SUN4I_TCON1_BASIC4_V_BACKPORCH(bp));
+
+ /* Set Hsync and Vsync length */
+ hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
+ vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
+ regmap_write(tcon->regs, SUN4I_TCON1_BASIC5_REG,
+ SUN4I_TCON1_BASIC5_V_SYNC(vsync) |
+ SUN4I_TCON1_BASIC5_H_SYNC(hsync));
+
+ /* Setup the polarity of multiple signals */
+ if (tcon->quirks->polarity_in_ch0) {
+ val = 0;
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val);
+ } else {
+ /* according to vendor driver, this bit must be always set */
+ val = SUN4I_TCON1_IO_POL_UNKNOWN;
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ val |= SUN4I_TCON1_IO_POL_HSYNC_POSITIVE;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ val |= SUN4I_TCON1_IO_POL_VSYNC_POSITIVE;
+
+ regmap_write(tcon->regs, SUN4I_TCON1_IO_POL_REG, val);
+ }
+
+ /* Map output pins to channel 1 */
+ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+ SUN4I_TCON_GCTL_IOMAP_MASK,
+ SUN4I_TCON_GCTL_IOMAP_TCON1);
+}
+
+void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder,
+ const struct drm_display_mode *mode)
+{
+ switch (encoder->encoder_type) {
+ case DRM_MODE_ENCODER_DSI:
+ /* DSI is tied to special case of CPU interface */
+ sun4i_tcon0_mode_set_cpu(tcon, encoder, mode);
+ break;
+ case DRM_MODE_ENCODER_LVDS:
+ sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
+ break;
+ case DRM_MODE_ENCODER_NONE:
+ sun4i_tcon0_mode_set_rgb(tcon, encoder, mode);
+ sun4i_tcon_set_mux(tcon, 0, encoder);
+ break;
+ case DRM_MODE_ENCODER_TVDAC:
+ case DRM_MODE_ENCODER_TMDS:
+ sun4i_tcon1_mode_set(tcon, mode);
+ sun4i_tcon_set_mux(tcon, 1, encoder);
+ break;
+ default:
+ DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
+ }
+}
+EXPORT_SYMBOL(sun4i_tcon_mode_set);
+
+static void sun4i_tcon_finish_page_flip(struct drm_device *dev,
+ struct sun4i_crtc *scrtc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ if (scrtc->event) {
+ drm_crtc_send_vblank_event(&scrtc->crtc, scrtc->event);
+ drm_crtc_vblank_put(&scrtc->crtc);
+ scrtc->event = NULL;
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static irqreturn_t sun4i_tcon_handler(int irq, void *private)
+{
+ struct sun4i_tcon *tcon = private;
+ struct drm_device *drm = tcon->drm;
+ struct sun4i_crtc *scrtc = tcon->crtc;
+ struct sunxi_engine *engine = scrtc->engine;
+ unsigned int status;
+
+ regmap_read(tcon->regs, SUN4I_TCON_GINT0_REG, &status);
+
+ if (!(status & (SUN4I_TCON_GINT0_VBLANK_INT(0) |
+ SUN4I_TCON_GINT0_VBLANK_INT(1) |
+ SUN4I_TCON_GINT0_TCON0_TRI_FINISH_INT)))
+ return IRQ_NONE;
+
+ drm_crtc_handle_vblank(&scrtc->crtc);
+ sun4i_tcon_finish_page_flip(drm, scrtc);
+
+ /* Acknowledge the interrupt */
+ regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG,
+ SUN4I_TCON_GINT0_VBLANK_INT(0) |
+ SUN4I_TCON_GINT0_VBLANK_INT(1) |
+ SUN4I_TCON_GINT0_TCON0_TRI_FINISH_INT,
+ 0);
+
+ if (engine->ops->vblank_quirk)
+ engine->ops->vblank_quirk(engine);
+
+ return IRQ_HANDLED;
+}
+
+static int sun4i_tcon_init_clocks(struct device *dev,
+ struct sun4i_tcon *tcon)
+{
+ tcon->clk = devm_clk_get_enabled(dev, "ahb");
+ if (IS_ERR(tcon->clk)) {
+ dev_err(dev, "Couldn't get the TCON bus clock\n");
+ return PTR_ERR(tcon->clk);
+ }
+
+ if (tcon->quirks->has_channel_0) {
+ tcon->sclk0 = devm_clk_get_enabled(dev, "tcon-ch0");
+ if (IS_ERR(tcon->sclk0)) {
+ dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
+ return PTR_ERR(tcon->sclk0);
+ }
+ }
+
+ if (tcon->quirks->has_channel_1) {
+ tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
+ if (IS_ERR(tcon->sclk1)) {
+ dev_err(dev, "Couldn't get the TCON channel 1 clock\n");
+ return PTR_ERR(tcon->sclk1);
+ }
+ }
+
+ return 0;
+}
+
+static int sun4i_tcon_init_irq(struct device *dev,
+ struct sun4i_tcon *tcon)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int irq, ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "Couldn't retrieve the TCON interrupt\n");
+ return irq;
+ }
+
+ ret = devm_request_irq(dev, irq, sun4i_tcon_handler, 0,
+ dev_name(dev), tcon);
+ if (ret) {
+ dev_err(dev, "Couldn't request the IRQ\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct regmap_config sun4i_tcon_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x800,
+};
+
+static int sun4i_tcon_init_regmap(struct device *dev,
+ struct sun4i_tcon *tcon)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ void __iomem *regs;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ tcon->regs = devm_regmap_init_mmio(dev, regs,
+ &sun4i_tcon_regmap_config);
+ if (IS_ERR(tcon->regs)) {
+ dev_err(dev, "Couldn't create the TCON regmap\n");
+ return PTR_ERR(tcon->regs);
+ }
+
+ /* Make sure the TCON is disabled and all IRQs are off */
+ regmap_write(tcon->regs, SUN4I_TCON_GCTL_REG, 0);
+ regmap_write(tcon->regs, SUN4I_TCON_GINT0_REG, 0);
+ regmap_write(tcon->regs, SUN4I_TCON_GINT1_REG, 0);
+
+ /* Disable IO lines and set them to tristate */
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, ~0);
+ regmap_write(tcon->regs, SUN4I_TCON1_IO_TRI_REG, ~0);
+
+ return 0;
+}
+
+/*
+ * On SoCs with the old display pipeline design (Display Engine 1.0),
+ * the TCON is always tied to just one backend. Hence we can traverse
+ * the of_graph upwards to find the backend our tcon is connected to,
+ * and take its ID as our own.
+ *
+ * We can either identify backends from their compatible strings, which
+ * means maintaining a large list of them. Or, since the backend is
+ * registered and binded before the TCON, we can just go through the
+ * list of registered backends and compare the device node.
+ *
+ * As the structures now store engines instead of backends, here this
+ * function in fact searches the corresponding engine, and the ID is
+ * requested via the get_id function of the engine.
+ */
+static struct sunxi_engine *
+sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv,
+ struct device_node *node,
+ u32 port_id)
+{
+ struct device_node *port, *ep, *remote;
+ struct sunxi_engine *engine = ERR_PTR(-EINVAL);
+ u32 reg = 0;
+
+ port = of_graph_get_port_by_id(node, port_id);
+ if (!port)
+ return ERR_PTR(-EINVAL);
+
+ /*
+ * This only works if there is only one path from the TCON
+ * to any display engine. Otherwise the probe order of the
+ * TCONs and display engines is not guaranteed. They may
+ * either bind to the wrong one, or worse, bind to the same
+ * one if additional checks are not done.
+ *
+ * Bail out if there are multiple input connections.
+ */
+ if (of_get_available_child_count(port) != 1)
+ goto out_put_port;
+
+ /* Get the first connection without specifying an ID */
+ ep = of_get_next_available_child(port, NULL);
+ if (!ep)
+ goto out_put_port;
+
+ remote = of_graph_get_remote_port_parent(ep);
+ if (!remote)
+ goto out_put_ep;
+
+ /* does this node match any registered engines? */
+ list_for_each_entry(engine, &drv->engine_list, list)
+ if (remote == engine->node)
+ goto out_put_remote;
+
+ /*
+ * According to device tree binding input ports have even id
+ * number and output ports have odd id. Since component with
+ * more than one input and one output (TCON TOP) exits, correct
+ * remote input id has to be calculated by subtracting 1 from
+ * remote output id. If this for some reason can't be done, 0
+ * is used as input port id.
+ */
+ of_node_put(port);
+ port = of_graph_get_remote_port(ep);
+ if (!of_property_read_u32(port, "reg", ®) && reg > 0)
+ reg -= 1;
+
+ /* keep looking through upstream ports */
+ engine = sun4i_tcon_find_engine_traverse(drv, remote, reg);
+
+out_put_remote:
+ of_node_put(remote);
+out_put_ep:
+ of_node_put(ep);
+out_put_port:
+ of_node_put(port);
+
+ return engine;
+}
+
+/*
+ * The device tree binding says that the remote endpoint ID of any
+ * connection between components, up to and including the TCON, of
+ * the display pipeline should be equal to the actual ID of the local
+ * component. Thus we can look at any one of the input connections of
+ * the TCONs, and use that connection's remote endpoint ID as our own.
+ *
+ * Since the user of this function already finds the input port,
+ * the port is passed in directly without further checks.
+ */
+static int sun4i_tcon_of_get_id_from_port(struct device_node *port)
+{
+ struct device_node *ep;
+ int ret = -EINVAL;
+
+ /* try finding an upstream endpoint */
+ for_each_available_child_of_node(port, ep) {
+ struct device_node *remote;
+ u32 reg;
+
+ remote = of_graph_get_remote_endpoint(ep);
+ if (!remote)
+ continue;
+
+ ret = of_property_read_u32(remote, "reg", ®);
+ if (ret)
+ continue;
+
+ ret = reg;
+ }
+
+ return ret;
+}
+
+/*
+ * Once we know the TCON's id, we can look through the list of
+ * engines to find a matching one. We assume all engines have
+ * been probed and added to the list.
+ */
+static struct sunxi_engine *sun4i_tcon_get_engine_by_id(struct sun4i_drv *drv,
+ int id)
+{
+ struct sunxi_engine *engine;
+
+ list_for_each_entry(engine, &drv->engine_list, list)
+ if (engine->id == id)
+ return engine;
+
+ return ERR_PTR(-EINVAL);
+}
+
+static bool sun4i_tcon_connected_to_tcon_top(struct device_node *node)
+{
+ struct device_node *remote;
+ bool ret = false;
+
+ remote = of_graph_get_remote_node(node, 0, -1);
+ if (remote) {
+ ret = !!(IS_ENABLED(CONFIG_DRM_SUN8I_TCON_TOP) &&
+ of_match_node(sun8i_tcon_top_of_table, remote));
+ of_node_put(remote);
+ }
+
+ return ret;
+}
+
+static int sun4i_tcon_get_index(struct sun4i_drv *drv)
+{
+ struct list_head *pos;
+ int size = 0;
+
+ /*
+ * Because TCON is added to the list at the end of the probe
+ * (after this function is called), index of the current TCON
+ * will be same as current TCON list size.
+ */
+ list_for_each(pos, &drv->tcon_list)
+ ++size;
+
+ return size;
+}
+
+/*
+ * On SoCs with the old display pipeline design (Display Engine 1.0),
+ * we assumed the TCON was always tied to just one backend. However
+ * this proved not to be the case. On the A31, the TCON can select
+ * either backend as its source. On the A20 (and likely on the A10),
+ * the backend can choose which TCON to output to.
+ *
+ * The device tree binding says that the remote endpoint ID of any
+ * connection between components, up to and including the TCON, of
+ * the display pipeline should be equal to the actual ID of the local
+ * component. Thus we should be able to look at any one of the input
+ * connections of the TCONs, and use that connection's remote endpoint
+ * ID as our own.
+ *
+ * However the connections between the backend and TCON were assumed
+ * to be always singular, and their endpoit IDs were all incorrectly
+ * set to 0. This means for these old device trees, we cannot just look
+ * up the remote endpoint ID of a TCON input endpoint. TCON1 would be
+ * incorrectly identified as TCON0.
+ *
+ * This function first checks if the TCON node has 2 input endpoints.
+ * If so, then the device tree is a corrected version, and it will use
+ * sun4i_tcon_of_get_id() and sun4i_tcon_get_engine_by_id() from above
+ * to fetch the ID and engine directly. If not, then it is likely an
+ * old device trees, where the endpoint IDs were incorrect, but did not
+ * have endpoint connections between the backend and TCON across
+ * different display pipelines. It will fall back to the old method of
+ * traversing the of_graph to try and find a matching engine by device
+ * node.
+ *
+ * In the case of single display pipeline device trees, either method
+ * works.
+ */
+static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv,
+ struct device_node *node)
+{
+ struct device_node *port;
+ struct sunxi_engine *engine;
+
+ port = of_graph_get_port_by_id(node, 0);
+ if (!port)
+ return ERR_PTR(-EINVAL);
+
+ /*
+ * Is this a corrected device tree with cross pipeline
+ * connections between the backend and TCON?
+ */
+ if (of_get_child_count(port) > 1) {
+ int id;
+
+ /*
+ * When pipeline has the same number of TCONs and engines which
+ * are represented by frontends/backends (DE1) or mixers (DE2),
+ * we match them by their respective IDs. However, if pipeline
+ * contains TCON TOP, chances are that there are either more
+ * TCONs than engines (R40) or TCONs with non-consecutive ids.
+ * (H6). In that case it's easier just use TCON index in list
+ * as an id. That means that on R40, any 2 TCONs can be enabled
+ * in DT out of 4 (there are 2 mixers). Due to the design of
+ * TCON TOP, remaining 2 TCONs can't be connected to anything
+ * anyway.
+ */
+ if (sun4i_tcon_connected_to_tcon_top(node))
+ id = sun4i_tcon_get_index(drv);
+ else
+ id = sun4i_tcon_of_get_id_from_port(port);
+
+ /* Get our engine by matching our ID */
+ engine = sun4i_tcon_get_engine_by_id(drv, id);
+
+ of_node_put(port);
+ return engine;
+ }
+
+ /* Fallback to old method by traversing input endpoints */
+ of_node_put(port);
+ return sun4i_tcon_find_engine_traverse(drv, node, 0);
+}
+
+static int sun4i_tcon_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct drm_device *drm = data;
+ struct sun4i_drv *drv = drm->dev_private;
+ struct sunxi_engine *engine;
+ struct device_node *remote;
+ struct sun4i_tcon *tcon;
+ struct reset_control *edp_rstc;
+ bool has_lvds_rst, has_lvds_alt, can_lvds;
+ int ret;
+
+ engine = sun4i_tcon_find_engine(drv, dev->of_node);
+ if (IS_ERR(engine)) {
+ dev_err(dev, "Couldn't find matching engine\n");
+ return -EPROBE_DEFER;
+ }
+
+ tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL);
+ if (!tcon)
+ return -ENOMEM;
+ dev_set_drvdata(dev, tcon);
+ tcon->drm = drm;
+ tcon->dev = dev;
+ tcon->id = engine->id;
+ tcon->quirks = of_device_get_match_data(dev);
+
+ tcon->lcd_rst = devm_reset_control_get(dev, "lcd");
+ if (IS_ERR(tcon->lcd_rst)) {
+ dev_err(dev, "Couldn't get our reset line\n");
+ return PTR_ERR(tcon->lcd_rst);
+ }
+
+ if (tcon->quirks->needs_edp_reset) {
+ edp_rstc = devm_reset_control_get_shared(dev, "edp");
+ if (IS_ERR(edp_rstc)) {
+ dev_err(dev, "Couldn't get edp reset line\n");
+ return PTR_ERR(edp_rstc);
+ }
+
+ ret = reset_control_deassert(edp_rstc);
+ if (ret) {
+ dev_err(dev, "Couldn't deassert edp reset line\n");
+ return ret;
+ }
+ }
+
+ /* Make sure our TCON is reset */
+ ret = reset_control_reset(tcon->lcd_rst);
+ if (ret) {
+ dev_err(dev, "Couldn't deassert our reset line\n");
+ return ret;
+ }
+
+ if (tcon->quirks->supports_lvds) {
+ /*
+ * This can only be made optional since we've had DT
+ * nodes without the LVDS reset properties.
+ *
+ * If the property is missing, just disable LVDS, and
+ * print a warning.
+ */
+ tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
+ if (IS_ERR(tcon->lvds_rst)) {
+ dev_err(dev, "Couldn't get our reset line\n");
+ return PTR_ERR(tcon->lvds_rst);
+ } else if (tcon->lvds_rst) {
+ has_lvds_rst = true;
+ reset_control_reset(tcon->lvds_rst);
+ } else {
+ has_lvds_rst = false;
+ }
+
+ /*
+ * This can only be made optional since we've had DT
+ * nodes without the LVDS reset properties.
+ *
+ * If the property is missing, just disable LVDS, and
+ * print a warning.
+ */
+ if (tcon->quirks->has_lvds_alt) {
+ tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
+ if (IS_ERR(tcon->lvds_pll)) {
+ if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
+ has_lvds_alt = false;
+ } else {
+ dev_err(dev, "Couldn't get the LVDS PLL\n");
+ return PTR_ERR(tcon->lvds_pll);
+ }
+ } else {
+ has_lvds_alt = true;
+ }
+ }
+
+ if (!has_lvds_rst ||
+ (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
+ dev_warn(dev, "Missing LVDS properties, Please upgrade your DT\n");
+ dev_warn(dev, "LVDS output disabled\n");
+ can_lvds = false;
+ } else {
+ can_lvds = true;
+ }
+ } else {
+ can_lvds = false;
+ }
+
+ ret = sun4i_tcon_init_clocks(dev, tcon);
+ if (ret) {
+ dev_err(dev, "Couldn't init our TCON clocks\n");
+ goto err_assert_reset;
+ }
+
+ ret = sun4i_tcon_init_regmap(dev, tcon);
+ if (ret) {
+ dev_err(dev, "Couldn't init our TCON regmap\n");
+ goto err_assert_reset;
+ }
+
+ if (tcon->quirks->has_channel_0) {
+ ret = sun4i_dclk_create(dev, tcon);
+ if (ret) {
+ dev_err(dev, "Couldn't create our TCON dot clock\n");
+ goto err_assert_reset;
+ }
+ }
+
+ ret = sun4i_tcon_init_irq(dev, tcon);
+ if (ret) {
+ dev_err(dev, "Couldn't init our TCON interrupts\n");
+ goto err_free_dotclock;
+ }
+
+ tcon->crtc = sun4i_crtc_init(drm, engine, tcon);
+ if (IS_ERR(tcon->crtc)) {
+ dev_err(dev, "Couldn't create our CRTC\n");
+ ret = PTR_ERR(tcon->crtc);
+ goto err_free_dotclock;
+ }
+
+ if (tcon->quirks->has_channel_0) {
+ /*
+ * If we have an LVDS panel connected to the TCON, we should
+ * just probe the LVDS connector. Otherwise, just probe RGB as
+ * we used to.
+ */
+ remote = of_graph_get_remote_node(dev->of_node, 1, 0);
+ if (of_device_is_compatible(remote, "panel-lvds"))
+ if (can_lvds)
+ ret = sun4i_lvds_init(drm, tcon);
+ else
+ ret = -EINVAL;
+ else
+ ret = sun4i_rgb_init(drm, tcon);
+ of_node_put(remote);
+
+ if (ret < 0)
+ goto err_free_dotclock;
+ }
+
+ if (tcon->quirks->needs_de_be_mux) {
+ /*
+ * We assume there is no dynamic muxing of backends
+ * and TCONs, so we select the backend with same ID.
+ *
+ * While dynamic selection might be interesting, since
+ * the CRTC is tied to the TCON, while the layers are
+ * tied to the backends, this means, we will need to
+ * switch between groups of layers. There might not be
+ * a way to represent this constraint in DRM.
+ */
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+ SUN4I_TCON0_CTL_SRC_SEL_MASK,
+ tcon->id);
+ regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+ SUN4I_TCON1_CTL_SRC_SEL_MASK,
+ tcon->id);
+ }
+
+ list_add_tail(&tcon->list, &drv->tcon_list);
+
+ return 0;
+
+err_free_dotclock:
+ if (tcon->quirks->has_channel_0)
+ sun4i_dclk_free(tcon);
+err_assert_reset:
+ reset_control_assert(tcon->lcd_rst);
+ return ret;
+}
+
+static void sun4i_tcon_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct sun4i_tcon *tcon = dev_get_drvdata(dev);
+
+ list_del(&tcon->list);
+ if (tcon->quirks->has_channel_0)
+ sun4i_dclk_free(tcon);
+}
+
+static const struct component_ops sun4i_tcon_ops = {
+ .bind = sun4i_tcon_bind,
+ .unbind = sun4i_tcon_unbind,
+};
+
+static int sun4i_tcon_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const struct sun4i_tcon_quirks *quirks;
+ struct drm_bridge *bridge;
+ struct drm_panel *panel;
+ int ret;
+
+ quirks = of_device_get_match_data(&pdev->dev);
+
+ /* panels and bridges are present only on TCONs with channel 0 */
+ if (quirks->has_channel_0) {
+ ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ }
+
+ return component_add(&pdev->dev, &sun4i_tcon_ops);
+}
+
+static int sun4i_tcon_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sun4i_tcon_ops);
+
+ return 0;
+}
+
+/* platform specific TCON muxing callbacks */
+static int sun4i_a10_tcon_set_mux(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder)
+{
+ struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
+ u32 shift;
+
+ if (!tcon0)
+ return -EINVAL;
+
+ switch (encoder->encoder_type) {
+ case DRM_MODE_ENCODER_TMDS:
+ /* HDMI */
+ shift = 8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
+ 0x3 << shift, tcon->id << shift);
+
+ return 0;
+}
+
+static int sun5i_a13_tcon_set_mux(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder)
+{
+ u32 val;
+
+ if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
+ val = 1;
+ else
+ val = 0;
+
+ /*
+ * FIXME: Undocumented bits
+ */
+ return regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val);
+}
+
+static int sun6i_tcon_set_mux(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder)
+{
+ struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
+ u32 shift;
+
+ if (!tcon0)
+ return -EINVAL;
+
+ switch (encoder->encoder_type) {
+ case DRM_MODE_ENCODER_TMDS:
+ /* HDMI */
+ shift = 8;
+ break;
+ default:
+ /* TODO A31 has MIPI DSI but A31s does not */
+ return -EINVAL;
+ }
+
+ regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
+ 0x3 << shift, tcon->id << shift);
+
+ return 0;
+}
+
+static int sun8i_r40_tcon_tv_set_mux(struct sun4i_tcon *tcon,
+ const struct drm_encoder *encoder)
+{
+ struct device_node *port, *remote;
+ struct platform_device *pdev;
+ int id, ret;
+
+ /* find TCON TOP platform device and TCON id */
+
+ port = of_graph_get_port_by_id(tcon->dev->of_node, 0);
+ if (!port)
+ return -EINVAL;
+
+ id = sun4i_tcon_of_get_id_from_port(port);
+ of_node_put(port);
+
+ remote = of_graph_get_remote_node(tcon->dev->of_node, 0, -1);
+ if (!remote)
+ return -EINVAL;
+
+ pdev = of_find_device_by_node(remote);
+ of_node_put(remote);
+ if (!pdev)
+ return -EINVAL;
+
+ if (IS_ENABLED(CONFIG_DRM_SUN8I_TCON_TOP) &&
+ encoder->encoder_type == DRM_MODE_ENCODER_TMDS) {
+ ret = sun8i_tcon_top_set_hdmi_src(&pdev->dev, id);
+ if (ret) {
+ put_device(&pdev->dev);
+ return ret;
+ }
+ }
+
+ if (IS_ENABLED(CONFIG_DRM_SUN8I_TCON_TOP)) {
+ ret = sun8i_tcon_top_de_config(&pdev->dev, tcon->id, id);
+ if (ret) {
+ put_device(&pdev->dev);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
+ .has_channel_0 = true,
+ .has_channel_1 = true,
+ .dclk_min_div = 4,
+ .set_mux = sun4i_a10_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
+ .has_channel_0 = true,
+ .has_channel_1 = true,
+ .dclk_min_div = 4,
+ .set_mux = sun5i_a13_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
+ .has_channel_0 = true,
+ .has_channel_1 = true,
+ .has_lvds_alt = true,
+ .needs_de_be_mux = true,
+ .dclk_min_div = 1,
+ .set_mux = sun6i_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
+ .has_channel_0 = true,
+ .has_channel_1 = true,
+ .needs_de_be_mux = true,
+ .dclk_min_div = 1,
+};
+
+static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
+ .has_channel_0 = true,
+ .has_channel_1 = true,
+ .dclk_min_div = 4,
+ /* Same display pipeline structure as A10 */
+ .set_mux = sun4i_a10_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
+ .has_channel_0 = true,
+ .has_lvds_alt = true,
+ .dclk_min_div = 1,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
+ .supports_lvds = true,
+ .has_channel_0 = true,
+ .dclk_min_div = 1,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
+ .has_channel_1 = true,
+};
+
+static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = {
+ .has_channel_1 = true,
+ .polarity_in_ch0 = true,
+ .set_mux = sun8i_r40_tcon_tv_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
+ .has_channel_0 = true,
+ .dclk_min_div = 1,
+};
+
+static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
+ .has_channel_0 = true,
+ .needs_edp_reset = true,
+ .dclk_min_div = 1,
+};
+
+static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
+ .has_channel_1 = true,
+ .needs_edp_reset = true,
+};
+
+/* sun4i_drv uses this list to check if a device node is a TCON */
+const struct of_device_id sun4i_tcon_of_table[] = {
+ { .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
+ { .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
+ { .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks },
+ { .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks },
+ { .compatible = "allwinner,sun7i-a20-tcon", .data = &sun7i_a20_quirks },
+ { .compatible = "allwinner,sun7i-a20-tcon0", .data = &sun7i_a20_quirks },
+ { .compatible = "allwinner,sun7i-a20-tcon1", .data = &sun7i_a20_quirks },
+ { .compatible = "allwinner,sun8i-a23-tcon", .data = &sun8i_a33_quirks },
+ { .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
+ { .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks },
+ { .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks },
+ { .compatible = "allwinner,sun8i-r40-tcon-tv", .data = &sun8i_r40_tv_quirks },
+ { .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
+ { .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
+ { .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
+EXPORT_SYMBOL(sun4i_tcon_of_table);
+
+static struct platform_driver sun4i_tcon_platform_driver = {
+ .probe = sun4i_tcon_probe,
+ .remove = sun4i_tcon_remove,
+ .driver = {
+ .name = "sun4i-tcon",
+ .of_match_table = sun4i_tcon_of_table,
+ },
+};
+module_platform_driver(sun4i_tcon_platform_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A10 Timing Controller Driver");
+MODULE_LICENSE("GPL");