ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/gpu/drm/vc4/vc4_crtc.c b/marvell/linux/drivers/gpu/drm/vc4/vc4_crtc.c
new file mode 100644
index 0000000..f1f0a7c
--- /dev/null
+++ b/marvell/linux/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -0,0 +1,1277 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Broadcom
+ */
+
+/**
+ * DOC: VC4 CRTC module
+ *
+ * In VC4, the Pixel Valve is what most closely corresponds to the
+ * DRM's concept of a CRTC. The PV generates video timings from the
+ * encoder's clock plus its configuration. It pulls scaled pixels from
+ * the HVS at that timing, and feeds it to the encoder.
+ *
+ * However, the DRM CRTC also collects the configuration of all the
+ * DRM planes attached to it. As a result, the CRTC is also
+ * responsible for writing the display list for the HVS channel that
+ * the CRTC will use.
+ *
+ * The 2835 has 3 different pixel valves. pv0 in the audio power
+ * domain feeds DSI0 or DPI, while pv1 feeds DS1 or SMI. pv2 in the
+ * image domain can feed either HDMI or the SDTV controller. The
+ * pixel valve chooses from the CPRMAN clocks (HSM for HDMI, VEC for
+ * SDTV, etc.) according to which output type is chosen in the mux.
+ *
+ * For power management, the pixel valve's registers are all clocked
+ * by the AXI clock, while the timings and FIFOs make use of the
+ * output-specific clock. Since the encoders also directly consume
+ * the CPRMAN clocks, and know what timings they need, they are the
+ * ones that set the clock.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_device.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic_uapi.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+struct vc4_crtc_state {
+ struct drm_crtc_state base;
+ /* Dlist area for this CRTC configuration. */
+ struct drm_mm_node mm;
+ bool feed_txp;
+ bool txp_armed;
+
+ struct {
+ unsigned int left;
+ unsigned int right;
+ unsigned int top;
+ unsigned int bottom;
+ } margins;
+};
+
+static inline struct vc4_crtc_state *
+to_vc4_crtc_state(struct drm_crtc_state *crtc_state)
+{
+ return (struct vc4_crtc_state *)crtc_state;
+}
+
+#define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset))
+#define CRTC_READ(offset) readl(vc4_crtc->regs + (offset))
+
+static const struct debugfs_reg32 crtc_regs[] = {
+ VC4_REG32(PV_CONTROL),
+ VC4_REG32(PV_V_CONTROL),
+ VC4_REG32(PV_VSYNCD_EVEN),
+ VC4_REG32(PV_HORZA),
+ VC4_REG32(PV_HORZB),
+ VC4_REG32(PV_VERTA),
+ VC4_REG32(PV_VERTB),
+ VC4_REG32(PV_VERTA_EVEN),
+ VC4_REG32(PV_VERTB_EVEN),
+ VC4_REG32(PV_INTEN),
+ VC4_REG32(PV_INTSTAT),
+ VC4_REG32(PV_STAT),
+ VC4_REG32(PV_HACT_ACT),
+};
+
+bool vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
+ bool in_vblank_irq, int *vpos, int *hpos,
+ ktime_t *stime, ktime_t *etime,
+ const struct drm_display_mode *mode)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_crtc *crtc = drm_crtc_from_index(dev, crtc_id);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ u32 val;
+ int fifo_lines;
+ int vblank_lines;
+ bool ret = false;
+
+ /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
+
+ /* Get optional system timestamp before query. */
+ if (stime)
+ *stime = ktime_get();
+
+ /*
+ * Read vertical scanline which is currently composed for our
+ * pixelvalve by the HVS, and also the scaler status.
+ */
+ val = HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel));
+
+ /* Get optional system timestamp after query. */
+ if (etime)
+ *etime = ktime_get();
+
+ /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */
+
+ /* Vertical position of hvs composed scanline. */
+ *vpos = VC4_GET_FIELD(val, SCALER_DISPSTATX_LINE);
+ *hpos = 0;
+
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ *vpos /= 2;
+
+ /* Use hpos to correct for field offset in interlaced mode. */
+ if (VC4_GET_FIELD(val, SCALER_DISPSTATX_FRAME_COUNT) % 2)
+ *hpos += mode->crtc_htotal / 2;
+ }
+
+ /* This is the offset we need for translating hvs -> pv scanout pos. */
+ fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay;
+
+ if (fifo_lines > 0)
+ ret = true;
+
+ /* HVS more than fifo_lines into frame for compositing? */
+ if (*vpos > fifo_lines) {
+ /*
+ * We are in active scanout and can get some meaningful results
+ * from HVS. The actual PV scanout can not trail behind more
+ * than fifo_lines as that is the fifo's capacity. Assume that
+ * in active scanout the HVS and PV work in lockstep wrt. HVS
+ * refilling the fifo and PV consuming from the fifo, ie.
+ * whenever the PV consumes and frees up a scanline in the
+ * fifo, the HVS will immediately refill it, therefore
+ * incrementing vpos. Therefore we choose HVS read position -
+ * fifo size in scanlines as a estimate of the real scanout
+ * position of the PV.
+ */
+ *vpos -= fifo_lines + 1;
+
+ return ret;
+ }
+
+ /*
+ * Less: This happens when we are in vblank and the HVS, after getting
+ * the VSTART restart signal from the PV, just started refilling its
+ * fifo with new lines from the top-most lines of the new framebuffers.
+ * The PV does not scan out in vblank, so does not remove lines from
+ * the fifo, so the fifo will be full quickly and the HVS has to pause.
+ * We can't get meaningful readings wrt. scanline position of the PV
+ * and need to make things up in a approximative but consistent way.
+ */
+ vblank_lines = mode->vtotal - mode->vdisplay;
+
+ if (in_vblank_irq) {
+ /*
+ * Assume the irq handler got called close to first
+ * line of vblank, so PV has about a full vblank
+ * scanlines to go, and as a base timestamp use the
+ * one taken at entry into vblank irq handler, so it
+ * is not affected by random delays due to lock
+ * contention on event_lock or vblank_time lock in
+ * the core.
+ */
+ *vpos = -vblank_lines;
+
+ if (stime)
+ *stime = vc4_crtc->t_vblank;
+ if (etime)
+ *etime = vc4_crtc->t_vblank;
+
+ /*
+ * If the HVS fifo is not yet full then we know for certain
+ * we are at the very beginning of vblank, as the hvs just
+ * started refilling, and the stime and etime timestamps
+ * truly correspond to start of vblank.
+ *
+ * Unfortunately there's no way to report this to upper levels
+ * and make it more useful.
+ */
+ } else {
+ /*
+ * No clue where we are inside vblank. Return a vpos of zero,
+ * which will cause calling code to just return the etime
+ * timestamp uncorrected. At least this is no worse than the
+ * standard fallback.
+ */
+ *vpos = 0;
+ }
+
+ return ret;
+}
+
+static void vc4_crtc_destroy(struct drm_crtc *crtc)
+{
+ drm_crtc_cleanup(crtc);
+}
+
+static void
+vc4_crtc_lut_load(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ u32 i;
+
+ /* The LUT memory is laid out with each HVS channel in order,
+ * each of which takes 256 writes for R, 256 for G, then 256
+ * for B.
+ */
+ HVS_WRITE(SCALER_GAMADDR,
+ SCALER_GAMADDR_AUTOINC |
+ (vc4_crtc->channel * 3 * crtc->gamma_size));
+
+ for (i = 0; i < crtc->gamma_size; i++)
+ HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_r[i]);
+ for (i = 0; i < crtc->gamma_size; i++)
+ HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_g[i]);
+ for (i = 0; i < crtc->gamma_size; i++)
+ HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_b[i]);
+}
+
+static void
+vc4_crtc_update_gamma_lut(struct drm_crtc *crtc)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_color_lut *lut = crtc->state->gamma_lut->data;
+ u32 length = drm_color_lut_size(crtc->state->gamma_lut);
+ u32 i;
+
+ for (i = 0; i < length; i++) {
+ vc4_crtc->lut_r[i] = drm_color_lut_extract(lut[i].red, 8);
+ vc4_crtc->lut_g[i] = drm_color_lut_extract(lut[i].green, 8);
+ vc4_crtc->lut_b[i] = drm_color_lut_extract(lut[i].blue, 8);
+ }
+
+ vc4_crtc_lut_load(crtc);
+}
+
+static u32 vc4_get_fifo_full_level(u32 format)
+{
+ static const u32 fifo_len_bytes = 64;
+ static const u32 hvs_latency_pix = 6;
+
+ switch (format) {
+ case PV_CONTROL_FORMAT_DSIV_16:
+ case PV_CONTROL_FORMAT_DSIC_16:
+ return fifo_len_bytes - 2 * hvs_latency_pix;
+ case PV_CONTROL_FORMAT_DSIV_18:
+ return fifo_len_bytes - 14;
+ case PV_CONTROL_FORMAT_24:
+ case PV_CONTROL_FORMAT_DSIV_24:
+ default:
+ return fifo_len_bytes - 3 * hvs_latency_pix;
+ }
+}
+
+/*
+ * Returns the encoder attached to the CRTC.
+ *
+ * VC4 can only scan out to one encoder at a time, while the DRM core
+ * allows drivers to push pixels to more than one encoder from the
+ * same CRTC.
+ */
+static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc)
+{
+ struct drm_connector *connector;
+ struct drm_connector_list_iter conn_iter;
+
+ drm_connector_list_iter_begin(crtc->dev, &conn_iter);
+ drm_for_each_connector_iter(connector, &conn_iter) {
+ if (connector->state->crtc == crtc) {
+ drm_connector_list_iter_end(&conn_iter);
+ return connector->encoder;
+ }
+ }
+ drm_connector_list_iter_end(&conn_iter);
+
+ return NULL;
+}
+
+static void vc4_crtc_config_pv(struct drm_crtc *crtc)
+{
+ struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc);
+ struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_crtc_state *state = crtc->state;
+ struct drm_display_mode *mode = &state->adjusted_mode;
+ bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE;
+ u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1;
+ bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 ||
+ vc4_encoder->type == VC4_ENCODER_TYPE_DSI1);
+ u32 format = is_dsi ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24;
+
+ /* Reset the PV fifo. */
+ CRTC_WRITE(PV_CONTROL, 0);
+ CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | PV_CONTROL_EN);
+ CRTC_WRITE(PV_CONTROL, 0);
+
+ CRTC_WRITE(PV_HORZA,
+ VC4_SET_FIELD((mode->htotal -
+ mode->hsync_end) * pixel_rep,
+ PV_HORZA_HBP) |
+ VC4_SET_FIELD((mode->hsync_end -
+ mode->hsync_start) * pixel_rep,
+ PV_HORZA_HSYNC));
+ CRTC_WRITE(PV_HORZB,
+ VC4_SET_FIELD((mode->hsync_start -
+ mode->hdisplay) * pixel_rep,
+ PV_HORZB_HFP) |
+ VC4_SET_FIELD(mode->hdisplay * pixel_rep, PV_HORZB_HACTIVE));
+
+ CRTC_WRITE(PV_VERTA,
+ VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+ PV_VERTA_VBP) |
+ VC4_SET_FIELD(mode->crtc_vsync_end - mode->crtc_vsync_start,
+ PV_VERTA_VSYNC));
+ CRTC_WRITE(PV_VERTB,
+ VC4_SET_FIELD(mode->crtc_vsync_start - mode->crtc_vdisplay,
+ PV_VERTB_VFP) |
+ VC4_SET_FIELD(mode->crtc_vdisplay, PV_VERTB_VACTIVE));
+
+ if (interlace) {
+ CRTC_WRITE(PV_VERTA_EVEN,
+ VC4_SET_FIELD(mode->crtc_vtotal -
+ mode->crtc_vsync_end - 1,
+ PV_VERTA_VBP) |
+ VC4_SET_FIELD(mode->crtc_vsync_end -
+ mode->crtc_vsync_start,
+ PV_VERTA_VSYNC));
+ CRTC_WRITE(PV_VERTB_EVEN,
+ VC4_SET_FIELD(mode->crtc_vsync_start -
+ mode->crtc_vdisplay,
+ PV_VERTB_VFP) |
+ VC4_SET_FIELD(mode->crtc_vdisplay, PV_VERTB_VACTIVE));
+
+ /* We set up first field even mode for HDMI. VEC's
+ * NTSC mode would want first field odd instead, once
+ * we support it (to do so, set ODD_FIRST and put the
+ * delay in VSYNCD_EVEN instead).
+ */
+ CRTC_WRITE(PV_V_CONTROL,
+ PV_VCONTROL_CONTINUOUS |
+ (is_dsi ? PV_VCONTROL_DSI : 0) |
+ PV_VCONTROL_INTERLACE |
+ VC4_SET_FIELD(mode->htotal * pixel_rep / 2,
+ PV_VCONTROL_ODD_DELAY));
+ CRTC_WRITE(PV_VSYNCD_EVEN, 0);
+ } else {
+ CRTC_WRITE(PV_V_CONTROL,
+ PV_VCONTROL_CONTINUOUS |
+ (is_dsi ? PV_VCONTROL_DSI : 0));
+ }
+
+ CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep);
+
+ CRTC_WRITE(PV_CONTROL,
+ VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
+ VC4_SET_FIELD(vc4_get_fifo_full_level(format),
+ PV_CONTROL_FIFO_LEVEL) |
+ VC4_SET_FIELD(pixel_rep - 1, PV_CONTROL_PIXEL_REP) |
+ PV_CONTROL_CLR_AT_START |
+ PV_CONTROL_TRIGGER_UNDERFLOW |
+ PV_CONTROL_WAIT_HSTART |
+ VC4_SET_FIELD(vc4_encoder->clock_select,
+ PV_CONTROL_CLK_SELECT) |
+ PV_CONTROL_FIFO_CLR |
+ PV_CONTROL_EN);
+}
+
+static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+ bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE;
+ bool debug_dump_regs = false;
+
+ if (debug_dump_regs) {
+ struct drm_printer p = drm_info_printer(&vc4_crtc->pdev->dev);
+ dev_info(&vc4_crtc->pdev->dev, "CRTC %d regs before:\n",
+ drm_crtc_index(crtc));
+ drm_print_regset32(&p, &vc4_crtc->regset);
+ }
+
+ if (vc4_crtc->channel == 2) {
+ u32 dispctrl;
+ u32 dsp3_mux;
+
+ /*
+ * SCALER_DISPCTRL_DSP3 = X, where X < 2 means 'connect DSP3 to
+ * FIFO X'.
+ * SCALER_DISPCTRL_DSP3 = 3 means 'disable DSP 3'.
+ *
+ * DSP3 is connected to FIFO2 unless the transposer is
+ * enabled. In this case, FIFO 2 is directly accessed by the
+ * TXP IP, and we need to disable the FIFO2 -> pixelvalve1
+ * route.
+ */
+ if (vc4_state->feed_txp)
+ dsp3_mux = VC4_SET_FIELD(3, SCALER_DISPCTRL_DSP3_MUX);
+ else
+ dsp3_mux = VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX);
+
+ dispctrl = HVS_READ(SCALER_DISPCTRL) &
+ ~SCALER_DISPCTRL_DSP3_MUX_MASK;
+ HVS_WRITE(SCALER_DISPCTRL, dispctrl | dsp3_mux);
+ }
+
+ if (!vc4_state->feed_txp)
+ vc4_crtc_config_pv(crtc);
+
+ HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+ SCALER_DISPBKGND_AUTOHS |
+ SCALER_DISPBKGND_GAMMA |
+ (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
+
+ /* Reload the LUT, since the SRAMs would have been disabled if
+ * all CRTCs had SCALER_DISPBKGND_GAMMA unset at once.
+ */
+ vc4_crtc_lut_load(crtc);
+
+ if (debug_dump_regs) {
+ struct drm_printer p = drm_info_printer(&vc4_crtc->pdev->dev);
+ dev_info(&vc4_crtc->pdev->dev, "CRTC %d regs after:\n",
+ drm_crtc_index(crtc));
+ drm_print_regset32(&p, &vc4_crtc->regset);
+ }
+}
+
+static void require_hvs_enabled(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ WARN_ON_ONCE((HVS_READ(SCALER_DISPCTRL) & SCALER_DISPCTRL_ENABLE) !=
+ SCALER_DISPCTRL_ENABLE);
+}
+
+static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ u32 chan = vc4_crtc->channel;
+ int ret;
+ require_hvs_enabled(dev);
+
+ /* Disable vblank irq handling before crtc is disabled. */
+ drm_crtc_vblank_off(crtc);
+
+ CRTC_WRITE(PV_V_CONTROL,
+ CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN);
+ ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1);
+ WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n");
+
+ if (HVS_READ(SCALER_DISPCTRLX(chan)) &
+ SCALER_DISPCTRLX_ENABLE) {
+ HVS_WRITE(SCALER_DISPCTRLX(chan),
+ SCALER_DISPCTRLX_RESET);
+
+ /* While the docs say that reset is self-clearing, it
+ * seems it doesn't actually.
+ */
+ HVS_WRITE(SCALER_DISPCTRLX(chan), 0);
+ }
+
+ /* Once we leave, the scaler should be disabled and its fifo empty. */
+
+ WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET);
+
+ WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)),
+ SCALER_DISPSTATX_MODE) !=
+ SCALER_DISPSTATX_MODE_DISABLED);
+
+ WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) &
+ (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) !=
+ SCALER_DISPSTATX_EMPTY);
+
+ /*
+ * Make sure we issue a vblank event after disabling the CRTC if
+ * someone was waiting it.
+ */
+ if (crtc->state->event) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ drm_crtc_send_vblank_event(crtc, crtc->state->event);
+ crtc->state->event = NULL;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ }
+}
+
+void vc4_crtc_txp_armed(struct drm_crtc_state *state)
+{
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+
+ vc4_state->txp_armed = true;
+}
+
+static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+
+ if (crtc->state->event) {
+ unsigned long flags;
+
+ crtc->state->event->pipe = drm_crtc_index(crtc);
+
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+
+ if (!vc4_state->feed_txp || vc4_state->txp_armed) {
+ vc4_crtc->event = crtc->state->event;
+ crtc->state->event = NULL;
+ }
+
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ } else {
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+ }
+}
+
+static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+
+ require_hvs_enabled(dev);
+
+ /* Enable vblank irq handling before crtc is started otherwise
+ * drm_crtc_get_vblank() fails in vc4_crtc_update_dlist().
+ */
+ drm_crtc_vblank_on(crtc);
+ vc4_crtc_update_dlist(crtc);
+
+ /* Turn on the scaler, which will wait for vstart to start
+ * compositing.
+ * When feeding the transposer, we should operate in oneshot
+ * mode.
+ */
+ HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel),
+ VC4_SET_FIELD(mode->hdisplay, SCALER_DISPCTRLX_WIDTH) |
+ VC4_SET_FIELD(mode->vdisplay, SCALER_DISPCTRLX_HEIGHT) |
+ SCALER_DISPCTRLX_ENABLE |
+ (vc4_state->feed_txp ? SCALER_DISPCTRLX_ONESHOT : 0));
+
+ /* When feeding the transposer block the pixelvalve is unneeded and
+ * should not be enabled.
+ */
+ if (!vc4_state->feed_txp)
+ CRTC_WRITE(PV_V_CONTROL,
+ CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
+}
+
+static enum drm_mode_status vc4_crtc_mode_valid(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode)
+{
+ /* Do not allow doublescan modes from user space */
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
+ DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n",
+ crtc->base.id);
+ return MODE_NO_DBLESCAN;
+ }
+
+ return MODE_OK;
+}
+
+void vc4_crtc_get_margins(struct drm_crtc_state *state,
+ unsigned int *left, unsigned int *right,
+ unsigned int *top, unsigned int *bottom)
+{
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+ int i;
+
+ *left = vc4_state->margins.left;
+ *right = vc4_state->margins.right;
+ *top = vc4_state->margins.top;
+ *bottom = vc4_state->margins.bottom;
+
+ /* We have to interate over all new connector states because
+ * vc4_crtc_get_margins() might be called before
+ * vc4_crtc_atomic_check() which means margins info in vc4_crtc_state
+ * might be outdated.
+ */
+ for_each_new_connector_in_state(state->state, conn, conn_state, i) {
+ if (conn_state->crtc != state->crtc)
+ continue;
+
+ *left = conn_state->tv.margins.left;
+ *right = conn_state->tv.margins.right;
+ *top = conn_state->tv.margins.top;
+ *bottom = conn_state->tv.margins.bottom;
+ break;
+ }
+}
+
+static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_plane *plane;
+ unsigned long flags;
+ const struct drm_plane_state *plane_state;
+ struct drm_connector *conn;
+ struct drm_connector_state *conn_state;
+ u32 dlist_count = 0;
+ int ret, i;
+
+ /* The pixelvalve can only feed one encoder (and encoders are
+ * 1:1 with connectors.)
+ */
+ if (hweight32(state->connector_mask) > 1)
+ return -EINVAL;
+
+ drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, state)
+ dlist_count += vc4_plane_dlist_size(plane_state);
+
+ dlist_count++; /* Account for SCALER_CTL0_END. */
+
+ spin_lock_irqsave(&vc4->hvs->mm_lock, flags);
+ ret = drm_mm_insert_node(&vc4->hvs->dlist_mm, &vc4_state->mm,
+ dlist_count);
+ spin_unlock_irqrestore(&vc4->hvs->mm_lock, flags);
+ if (ret)
+ return ret;
+
+ for_each_new_connector_in_state(state->state, conn, conn_state, i) {
+ if (conn_state->crtc != crtc)
+ continue;
+
+ /* The writeback connector is implemented using the transposer
+ * block which is directly taking its data from the HVS FIFO.
+ */
+ if (conn->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) {
+ state->no_vblank = true;
+ vc4_state->feed_txp = true;
+ } else {
+ state->no_vblank = false;
+ vc4_state->feed_txp = false;
+ }
+
+ vc4_state->margins.left = conn_state->tv.margins.left;
+ vc4_state->margins.right = conn_state->tv.margins.right;
+ vc4_state->margins.top = conn_state->tv.margins.top;
+ vc4_state->margins.bottom = conn_state->tv.margins.bottom;
+ break;
+ }
+
+ return 0;
+}
+
+static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ struct drm_plane *plane;
+ struct vc4_plane_state *vc4_plane_state;
+ bool debug_dump_regs = false;
+ bool enable_bg_fill = false;
+ u32 __iomem *dlist_start = vc4->hvs->dlist + vc4_state->mm.start;
+ u32 __iomem *dlist_next = dlist_start;
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc));
+ vc4_hvs_dump_state(dev);
+ }
+
+ /* Copy all the active planes' dlist contents to the hardware dlist. */
+ drm_atomic_crtc_for_each_plane(plane, crtc) {
+ /* Is this the first active plane? */
+ if (dlist_next == dlist_start) {
+ /* We need to enable background fill when a plane
+ * could be alpha blending from the background, i.e.
+ * where no other plane is underneath. It suffices to
+ * consider the first active plane here since we set
+ * needs_bg_fill such that either the first plane
+ * already needs it or all planes on top blend from
+ * the first or a lower plane.
+ */
+ vc4_plane_state = to_vc4_plane_state(plane->state);
+ enable_bg_fill = vc4_plane_state->needs_bg_fill;
+ }
+
+ dlist_next += vc4_plane_write_dlist(plane, dlist_next);
+ }
+
+ writel(SCALER_CTL0_END, dlist_next);
+ dlist_next++;
+
+ WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size);
+
+ if (enable_bg_fill)
+ /* This sets a black background color fill, as is the case
+ * with other DRM drivers.
+ */
+ HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+ HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel)) |
+ SCALER_DISPBKGND_FILL);
+
+ /* Only update DISPLIST if the CRTC was already running and is not
+ * being disabled.
+ * vc4_crtc_enable() takes care of updating the dlist just after
+ * re-enabling VBLANK interrupts and before enabling the engine.
+ * If the CRTC is being disabled, there's no point in updating this
+ * information.
+ */
+ if (crtc->state->active && old_state->active)
+ vc4_crtc_update_dlist(crtc);
+
+ if (crtc->state->color_mgmt_changed) {
+ u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel));
+
+ if (crtc->state->gamma_lut) {
+ vc4_crtc_update_gamma_lut(crtc);
+ dispbkgndx |= SCALER_DISPBKGND_GAMMA;
+ } else {
+ /* Unsetting DISPBKGND_GAMMA skips the gamma lut step
+ * in hardware, which is the same as a linear lut that
+ * DRM expects us to use in absence of a user lut.
+ */
+ dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
+ }
+ HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), dispbkgndx);
+ }
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
+ vc4_hvs_dump_state(dev);
+ }
+}
+
+static int vc4_enable_vblank(struct drm_crtc *crtc)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+ CRTC_WRITE(PV_INTEN, PV_INT_VFP_START);
+
+ return 0;
+}
+
+static void vc4_disable_vblank(struct drm_crtc *crtc)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+ CRTC_WRITE(PV_INTEN, 0);
+}
+
+static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
+{
+ struct drm_crtc *crtc = &vc4_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ u32 chan = vc4_crtc->channel;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ if (vc4_crtc->event &&
+ (vc4_state->mm.start == HVS_READ(SCALER_DISPLACTX(chan)) ||
+ vc4_state->feed_txp)) {
+ drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
+ vc4_crtc->event = NULL;
+ drm_crtc_vblank_put(crtc);
+
+ /* Wait for the page flip to unmask the underrun to ensure that
+ * the display list was updated by the hardware. Before that
+ * happens, the HVS will be using the previous display list with
+ * the CRTC and encoder already reconfigured, leading to
+ * underruns. This can be seen when reconfiguring the CRTC.
+ */
+ vc4_hvs_unmask_underrun(dev, vc4_crtc->channel);
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+void vc4_crtc_handle_vblank(struct vc4_crtc *crtc)
+{
+ crtc->t_vblank = ktime_get();
+ drm_crtc_handle_vblank(&crtc->base);
+ vc4_crtc_handle_page_flip(crtc);
+}
+
+static irqreturn_t vc4_crtc_irq_handler(int irq, void *data)
+{
+ struct vc4_crtc *vc4_crtc = data;
+ u32 stat = CRTC_READ(PV_INTSTAT);
+ irqreturn_t ret = IRQ_NONE;
+
+ if (stat & PV_INT_VFP_START) {
+ CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
+ vc4_crtc_handle_vblank(vc4_crtc);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+struct vc4_async_flip_state {
+ struct drm_crtc *crtc;
+ struct drm_framebuffer *fb;
+ struct drm_framebuffer *old_fb;
+ struct drm_pending_vblank_event *event;
+
+ struct vc4_seqno_cb cb;
+};
+
+/* Called when the V3D execution for the BO being flipped to is done, so that
+ * we can actually update the plane's address to point to it.
+ */
+static void
+vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
+{
+ struct vc4_async_flip_state *flip_state =
+ container_of(cb, struct vc4_async_flip_state, cb);
+ struct drm_crtc *crtc = flip_state->crtc;
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_plane *plane = crtc->primary;
+
+ vc4_plane_async_set_fb(plane, flip_state->fb);
+ if (flip_state->event) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ drm_crtc_send_vblank_event(crtc, flip_state->event);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ }
+
+ drm_crtc_vblank_put(crtc);
+ drm_framebuffer_put(flip_state->fb);
+
+ /* Decrement the BO usecnt in order to keep the inc/dec calls balanced
+ * when the planes are updated through the async update path.
+ * FIXME: we should move to generic async-page-flip when it's
+ * available, so that we can get rid of this hand-made cleanup_fb()
+ * logic.
+ */
+ if (flip_state->old_fb) {
+ struct drm_gem_cma_object *cma_bo;
+ struct vc4_bo *bo;
+
+ cma_bo = drm_fb_cma_get_gem_obj(flip_state->old_fb, 0);
+ bo = to_vc4_bo(&cma_bo->base);
+ vc4_bo_dec_usecnt(bo);
+ drm_framebuffer_put(flip_state->old_fb);
+ }
+
+ kfree(flip_state);
+
+ up(&vc4->async_modeset);
+}
+
+/* Implements async (non-vblank-synced) page flips.
+ *
+ * The page flip ioctl needs to return immediately, so we grab the
+ * modeset semaphore on the pipe, and queue the address update for
+ * when V3D is done with the BO being flipped to.
+ */
+static int vc4_async_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t flags)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct drm_plane *plane = crtc->primary;
+ int ret = 0;
+ struct vc4_async_flip_state *flip_state;
+ struct drm_gem_cma_object *cma_bo = drm_fb_cma_get_gem_obj(fb, 0);
+ struct vc4_bo *bo = to_vc4_bo(&cma_bo->base);
+
+ /* Increment the BO usecnt here, so that we never end up with an
+ * unbalanced number of vc4_bo_{dec,inc}_usecnt() calls when the
+ * plane is later updated through the non-async path.
+ * FIXME: we should move to generic async-page-flip when it's
+ * available, so that we can get rid of this hand-made prepare_fb()
+ * logic.
+ */
+ ret = vc4_bo_inc_usecnt(bo);
+ if (ret)
+ return ret;
+
+ flip_state = kzalloc(sizeof(*flip_state), GFP_KERNEL);
+ if (!flip_state) {
+ vc4_bo_dec_usecnt(bo);
+ return -ENOMEM;
+ }
+
+ drm_framebuffer_get(fb);
+ flip_state->fb = fb;
+ flip_state->crtc = crtc;
+ flip_state->event = event;
+
+ /* Make sure all other async modesetes have landed. */
+ ret = down_interruptible(&vc4->async_modeset);
+ if (ret) {
+ drm_framebuffer_put(fb);
+ vc4_bo_dec_usecnt(bo);
+ kfree(flip_state);
+ return ret;
+ }
+
+ /* Save the current FB before it's replaced by the new one in
+ * drm_atomic_set_fb_for_plane(). We'll need the old FB in
+ * vc4_async_page_flip_complete() to decrement the BO usecnt and keep
+ * it consistent.
+ * FIXME: we should move to generic async-page-flip when it's
+ * available, so that we can get rid of this hand-made cleanup_fb()
+ * logic.
+ */
+ flip_state->old_fb = plane->state->fb;
+ if (flip_state->old_fb)
+ drm_framebuffer_get(flip_state->old_fb);
+
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ /* Immediately update the plane's legacy fb pointer, so that later
+ * modeset prep sees the state that will be present when the semaphore
+ * is released.
+ */
+ drm_atomic_set_fb_for_plane(plane->state, fb);
+
+ vc4_queue_seqno_cb(dev, &flip_state->cb, bo->seqno,
+ vc4_async_page_flip_complete);
+
+ /* Driver takes ownership of state on successful async commit. */
+ return 0;
+}
+
+static int vc4_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t flags,
+ struct drm_modeset_acquire_ctx *ctx)
+{
+ if (flags & DRM_MODE_PAGE_FLIP_ASYNC)
+ return vc4_async_page_flip(crtc, fb, event, flags);
+ else
+ return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx);
+}
+
+static struct drm_crtc_state *vc4_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+ struct vc4_crtc_state *vc4_state, *old_vc4_state;
+
+ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
+ if (!vc4_state)
+ return NULL;
+
+ old_vc4_state = to_vc4_crtc_state(crtc->state);
+ vc4_state->feed_txp = old_vc4_state->feed_txp;
+ vc4_state->margins = old_vc4_state->margins;
+
+ __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
+ return &vc4_state->base;
+}
+
+static void vc4_crtc_destroy_state(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(crtc->dev);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+
+ if (vc4_state->mm.allocated) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&vc4->hvs->mm_lock, flags);
+ drm_mm_remove_node(&vc4_state->mm);
+ spin_unlock_irqrestore(&vc4->hvs->mm_lock, flags);
+
+ }
+
+ drm_atomic_helper_crtc_destroy_state(crtc, state);
+}
+
+static void
+vc4_crtc_reset(struct drm_crtc *crtc)
+{
+ if (crtc->state)
+ vc4_crtc_destroy_state(crtc, crtc->state);
+
+ crtc->state = kzalloc(sizeof(struct vc4_crtc_state), GFP_KERNEL);
+ if (crtc->state)
+ crtc->state->crtc = crtc;
+}
+
+static const struct drm_crtc_funcs vc4_crtc_funcs = {
+ .set_config = drm_atomic_helper_set_config,
+ .destroy = vc4_crtc_destroy,
+ .page_flip = vc4_page_flip,
+ .set_property = NULL,
+ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */
+ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */
+ .reset = vc4_crtc_reset,
+ .atomic_duplicate_state = vc4_crtc_duplicate_state,
+ .atomic_destroy_state = vc4_crtc_destroy_state,
+ .gamma_set = drm_atomic_helper_legacy_gamma_set,
+ .enable_vblank = vc4_enable_vblank,
+ .disable_vblank = vc4_disable_vblank,
+};
+
+static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
+ .mode_set_nofb = vc4_crtc_mode_set_nofb,
+ .mode_valid = vc4_crtc_mode_valid,
+ .atomic_check = vc4_crtc_atomic_check,
+ .atomic_flush = vc4_crtc_atomic_flush,
+ .atomic_enable = vc4_crtc_atomic_enable,
+ .atomic_disable = vc4_crtc_atomic_disable,
+};
+
+static const struct vc4_crtc_data pv0_data = {
+ .hvs_channel = 0,
+ .debugfs_name = "crtc0_regs",
+ .encoder_types = {
+ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI0,
+ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_DPI,
+ },
+};
+
+static const struct vc4_crtc_data pv1_data = {
+ .hvs_channel = 2,
+ .debugfs_name = "crtc1_regs",
+ .encoder_types = {
+ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI1,
+ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_SMI,
+ },
+};
+
+static const struct vc4_crtc_data pv2_data = {
+ .hvs_channel = 1,
+ .debugfs_name = "crtc2_regs",
+ .encoder_types = {
+ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI,
+ [PV_CONTROL_CLK_SELECT_VEC] = VC4_ENCODER_TYPE_VEC,
+ },
+};
+
+static const struct of_device_id vc4_crtc_dt_match[] = {
+ { .compatible = "brcm,bcm2835-pixelvalve0", .data = &pv0_data },
+ { .compatible = "brcm,bcm2835-pixelvalve1", .data = &pv1_data },
+ { .compatible = "brcm,bcm2835-pixelvalve2", .data = &pv2_data },
+ {}
+};
+
+static void vc4_set_crtc_possible_masks(struct drm_device *drm,
+ struct drm_crtc *crtc)
+{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ const struct vc4_crtc_data *crtc_data = vc4_crtc->data;
+ const enum vc4_encoder_type *encoder_types = crtc_data->encoder_types;
+ struct drm_encoder *encoder;
+
+ drm_for_each_encoder(encoder, drm) {
+ struct vc4_encoder *vc4_encoder;
+ int i;
+
+ /* HVS FIFO2 can feed the TXP IP. */
+ if (crtc_data->hvs_channel == 2 &&
+ encoder->encoder_type == DRM_MODE_ENCODER_VIRTUAL) {
+ encoder->possible_crtcs |= drm_crtc_mask(crtc);
+ continue;
+ }
+
+ vc4_encoder = to_vc4_encoder(encoder);
+ for (i = 0; i < ARRAY_SIZE(crtc_data->encoder_types); i++) {
+ if (vc4_encoder->type == encoder_types[i]) {
+ vc4_encoder->clock_select = i;
+ encoder->possible_crtcs |= drm_crtc_mask(crtc);
+ break;
+ }
+ }
+ }
+}
+
+static void
+vc4_crtc_get_cob_allocation(struct vc4_crtc *vc4_crtc)
+{
+ struct drm_device *drm = vc4_crtc->base.dev;
+ struct vc4_dev *vc4 = to_vc4_dev(drm);
+ u32 dispbase = HVS_READ(SCALER_DISPBASEX(vc4_crtc->channel));
+ /* Top/base are supposed to be 4-pixel aligned, but the
+ * Raspberry Pi firmware fills the low bits (which are
+ * presumably ignored).
+ */
+ u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3;
+ u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3;
+
+ vc4_crtc->cob_size = top - base + 4;
+}
+
+static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_crtc *vc4_crtc;
+ struct drm_crtc *crtc;
+ struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp;
+ const struct of_device_id *match;
+ int ret, i;
+
+ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL);
+ if (!vc4_crtc)
+ return -ENOMEM;
+ crtc = &vc4_crtc->base;
+
+ match = of_match_device(vc4_crtc_dt_match, dev);
+ if (!match)
+ return -ENODEV;
+ vc4_crtc->data = match->data;
+ vc4_crtc->pdev = pdev;
+
+ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0);
+ if (IS_ERR(vc4_crtc->regs))
+ return PTR_ERR(vc4_crtc->regs);
+
+ vc4_crtc->regset.base = vc4_crtc->regs;
+ vc4_crtc->regset.regs = crtc_regs;
+ vc4_crtc->regset.nregs = ARRAY_SIZE(crtc_regs);
+
+ /* For now, we create just the primary and the legacy cursor
+ * planes. We should be able to stack more planes on easily,
+ * but to do that we would need to compute the bandwidth
+ * requirement of the plane configuration, and reject ones
+ * that will take too much.
+ */
+ primary_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_PRIMARY);
+ if (IS_ERR(primary_plane)) {
+ dev_err(dev, "failed to construct primary plane\n");
+ ret = PTR_ERR(primary_plane);
+ goto err;
+ }
+
+ drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
+ &vc4_crtc_funcs, NULL);
+ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
+ vc4_crtc->channel = vc4_crtc->data->hvs_channel;
+ drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
+ drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
+
+ /* We support CTM, but only for one CRTC at a time. It's therefore
+ * implemented as private driver state in vc4_kms, not here.
+ */
+ drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size);
+
+ /* Set up some arbitrary number of planes. We're not limited
+ * by a set number of physical registers, just the space in
+ * the HVS (16k) and how small an plane can be (28 bytes).
+ * However, each plane we set up takes up some memory, and
+ * increases the cost of looping over planes, which atomic
+ * modesetting does quite a bit. As a result, we pick a
+ * modest number of planes to expose, that should hopefully
+ * still cover any sane usecase.
+ */
+ for (i = 0; i < 8; i++) {
+ struct drm_plane *plane =
+ vc4_plane_init(drm, DRM_PLANE_TYPE_OVERLAY);
+
+ if (IS_ERR(plane))
+ continue;
+
+ plane->possible_crtcs = drm_crtc_mask(crtc);
+ }
+
+ /* Set up the legacy cursor after overlay initialization,
+ * since we overlay planes on the CRTC in the order they were
+ * initialized.
+ */
+ cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
+ if (!IS_ERR(cursor_plane)) {
+ cursor_plane->possible_crtcs = drm_crtc_mask(crtc);
+ crtc->cursor = cursor_plane;
+ }
+
+ vc4_crtc_get_cob_allocation(vc4_crtc);
+
+ CRTC_WRITE(PV_INTEN, 0);
+ CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
+ vc4_crtc_irq_handler, 0, "vc4 crtc", vc4_crtc);
+ if (ret)
+ goto err_destroy_planes;
+
+ vc4_set_crtc_possible_masks(drm, crtc);
+
+ for (i = 0; i < crtc->gamma_size; i++) {
+ vc4_crtc->lut_r[i] = i;
+ vc4_crtc->lut_g[i] = i;
+ vc4_crtc->lut_b[i] = i;
+ }
+
+ platform_set_drvdata(pdev, vc4_crtc);
+
+ vc4_debugfs_add_regset32(drm, vc4_crtc->data->debugfs_name,
+ &vc4_crtc->regset);
+
+ return 0;
+
+err_destroy_planes:
+ list_for_each_entry_safe(destroy_plane, temp,
+ &drm->mode_config.plane_list, head) {
+ if (destroy_plane->possible_crtcs == drm_crtc_mask(crtc))
+ destroy_plane->funcs->destroy(destroy_plane);
+ }
+err:
+ return ret;
+}
+
+static void vc4_crtc_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev);
+
+ vc4_crtc_destroy(&vc4_crtc->base);
+
+ CRTC_WRITE(PV_INTEN, 0);
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+static const struct component_ops vc4_crtc_ops = {
+ .bind = vc4_crtc_bind,
+ .unbind = vc4_crtc_unbind,
+};
+
+static int vc4_crtc_dev_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &vc4_crtc_ops);
+}
+
+static int vc4_crtc_dev_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &vc4_crtc_ops);
+ return 0;
+}
+
+struct platform_driver vc4_crtc_driver = {
+ .probe = vc4_crtc_dev_probe,
+ .remove = vc4_crtc_dev_remove,
+ .driver = {
+ .name = "vc4_crtc",
+ .of_match_table = vc4_crtc_dt_match,
+ },
+};