ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/mmc/host/sdhci-of-aspeed.c b/marvell/linux/drivers/mmc/host/sdhci-of-aspeed.c
new file mode 100644
index 0000000..792806a
--- /dev/null
+++ b/marvell/linux/drivers/mmc/host/sdhci-of-aspeed.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright (C) 2019 ASPEED Technology Inc. */
+/* Copyright (C) 2019 IBM Corp. */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "sdhci-pltfm.h"
+
+#define ASPEED_SDC_INFO 0x00
+#define ASPEED_SDC_S1MMC8 BIT(25)
+#define ASPEED_SDC_S0MMC8 BIT(24)
+
+struct aspeed_sdc {
+ struct clk *clk;
+ struct resource *res;
+
+ spinlock_t lock;
+ void __iomem *regs;
+};
+
+struct aspeed_sdhci {
+ struct aspeed_sdc *parent;
+ u32 width_mask;
+};
+
+static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
+ struct aspeed_sdhci *sdhci,
+ bool bus8)
+{
+ u32 info;
+
+ /* Set/clear 8 bit mode */
+ spin_lock(&sdc->lock);
+ info = readl(sdc->regs + ASPEED_SDC_INFO);
+ if (bus8)
+ info |= sdhci->width_mask;
+ else
+ info &= ~sdhci->width_mask;
+ writel(info, sdc->regs + ASPEED_SDC_INFO);
+ spin_unlock(&sdc->lock);
+}
+
+static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ unsigned long parent;
+ int div;
+ u16 clk;
+
+ pltfm_host = sdhci_priv(host);
+ parent = clk_get_rate(pltfm_host->clk);
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ if (WARN_ON(clock > host->max_clk))
+ clock = host->max_clk;
+
+ for (div = 2; div < 256; div *= 2) {
+ if ((parent / div) <= clock)
+ break;
+ }
+ div >>= 1;
+
+ clk = div << SDHCI_DIVIDER_SHIFT;
+
+ sdhci_enable_clk(host, clk);
+}
+
+static unsigned int aspeed_sdhci_get_max_clock(struct sdhci_host *host)
+{
+ if (host->mmc->f_max)
+ return host->mmc->f_max;
+
+ return sdhci_pltfm_clk_get_max_clock(host);
+}
+
+static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+ struct sdhci_pltfm_host *pltfm_priv;
+ struct aspeed_sdhci *aspeed_sdhci;
+ struct aspeed_sdc *aspeed_sdc;
+ u8 ctrl;
+
+ pltfm_priv = sdhci_priv(host);
+ aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
+ aspeed_sdc = aspeed_sdhci->parent;
+
+ /* Set/clear 8-bit mode */
+ aspeed_sdc_configure_8bit_mode(aspeed_sdc, aspeed_sdhci,
+ width == MMC_BUS_WIDTH_8);
+
+ /* Set/clear 1 or 4 bit mode */
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static const struct sdhci_ops aspeed_sdhci_ops = {
+ .set_clock = aspeed_sdhci_set_clock,
+ .get_max_clock = aspeed_sdhci_get_max_clock,
+ .set_bus_width = aspeed_sdhci_set_bus_width,
+ .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data aspeed_sdhci_pdata = {
+ .ops = &aspeed_sdhci_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+};
+
+static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
+ struct resource *res)
+{
+ resource_size_t delta;
+
+ if (!res || resource_type(res) != IORESOURCE_MEM)
+ return -EINVAL;
+
+ if (res->start < dev->parent->res->start)
+ return -EINVAL;
+
+ delta = res->start - dev->parent->res->start;
+ if (delta & (0x100 - 1))
+ return -EINVAL;
+
+ return (delta / 0x100) - 1;
+}
+
+static int aspeed_sdhci_probe(struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct aspeed_sdhci *dev;
+ struct sdhci_host *host;
+ struct resource *res;
+ int slot;
+ int ret;
+
+ host = sdhci_pltfm_init(pdev, &aspeed_sdhci_pdata, sizeof(*dev));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+ dev = sdhci_pltfm_priv(pltfm_host);
+ dev->parent = dev_get_drvdata(pdev->dev.parent);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ slot = aspeed_sdhci_calculate_slot(dev, res);
+
+ if (slot < 0)
+ return slot;
+ else if (slot >= 2)
+ return -EINVAL;
+
+ dev_info(&pdev->dev, "Configuring for slot %d\n", slot);
+ dev->width_mask = !slot ? ASPEED_SDC_S0MMC8 : ASPEED_SDC_S1MMC8;
+
+ sdhci_get_of_property(pdev);
+
+ pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pltfm_host->clk))
+ return PTR_ERR(pltfm_host->clk);
+
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable SDIO clock\n");
+ goto err_pltfm_free;
+ }
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err_sdhci_add;
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_sdhci_add;
+
+ return 0;
+
+err_sdhci_add:
+ clk_disable_unprepare(pltfm_host->clk);
+err_pltfm_free:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static int aspeed_sdhci_remove(struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_host *host;
+ int dead = 0;
+
+ host = platform_get_drvdata(pdev);
+ pltfm_host = sdhci_priv(host);
+
+ sdhci_remove_host(host, dead);
+
+ clk_disable_unprepare(pltfm_host->clk);
+
+ sdhci_pltfm_free(pdev);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_sdhci_of_match[] = {
+ { .compatible = "aspeed,ast2400-sdhci", },
+ { .compatible = "aspeed,ast2500-sdhci", },
+ { .compatible = "aspeed,ast2600-sdhci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_sdhci_of_match);
+
+static struct platform_driver aspeed_sdhci_driver = {
+ .driver = {
+ .name = "sdhci-aspeed",
+ .of_match_table = aspeed_sdhci_of_match,
+ },
+ .probe = aspeed_sdhci_probe,
+ .remove = aspeed_sdhci_remove,
+};
+
+static int aspeed_sdc_probe(struct platform_device *pdev)
+
+{
+ struct device_node *parent, *child;
+ struct aspeed_sdc *sdc;
+ int ret;
+
+ sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
+ if (!sdc)
+ return -ENOMEM;
+
+ spin_lock_init(&sdc->lock);
+
+ sdc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(sdc->clk))
+ return PTR_ERR(sdc->clk);
+
+ ret = clk_prepare_enable(sdc->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable SDCLK\n");
+ return ret;
+ }
+
+ sdc->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sdc->regs = devm_ioremap_resource(&pdev->dev, sdc->res);
+ if (IS_ERR(sdc->regs)) {
+ ret = PTR_ERR(sdc->regs);
+ goto err_clk;
+ }
+
+ dev_set_drvdata(&pdev->dev, sdc);
+
+ parent = pdev->dev.of_node;
+ for_each_available_child_of_node(parent, child) {
+ struct platform_device *cpdev;
+
+ cpdev = of_platform_device_create(child, NULL, &pdev->dev);
+ if (!cpdev) {
+ of_node_put(child);
+ ret = -ENODEV;
+ goto err_clk;
+ }
+ }
+
+ return 0;
+
+err_clk:
+ clk_disable_unprepare(sdc->clk);
+ return ret;
+}
+
+static int aspeed_sdc_remove(struct platform_device *pdev)
+{
+ struct aspeed_sdc *sdc = dev_get_drvdata(&pdev->dev);
+
+ clk_disable_unprepare(sdc->clk);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_sdc_of_match[] = {
+ { .compatible = "aspeed,ast2400-sd-controller", },
+ { .compatible = "aspeed,ast2500-sd-controller", },
+ { .compatible = "aspeed,ast2600-sd-controller", },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
+
+static struct platform_driver aspeed_sdc_driver = {
+ .driver = {
+ .name = "sd-controller-aspeed",
+ .pm = &sdhci_pltfm_pmops,
+ .of_match_table = aspeed_sdc_of_match,
+ },
+ .probe = aspeed_sdc_probe,
+ .remove = aspeed_sdc_remove,
+};
+
+static int __init aspeed_sdc_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&aspeed_sdhci_driver);
+ if (rc < 0)
+ return rc;
+
+ rc = platform_driver_register(&aspeed_sdc_driver);
+ if (rc < 0)
+ platform_driver_unregister(&aspeed_sdhci_driver);
+
+ return rc;
+}
+module_init(aspeed_sdc_init);
+
+static void __exit aspeed_sdc_exit(void)
+{
+ platform_driver_unregister(&aspeed_sdc_driver);
+ platform_driver_unregister(&aspeed_sdhci_driver);
+}
+module_exit(aspeed_sdc_exit);
+
+MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_LICENSE("GPL");