ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/net/dsa/bcm_sf2_regs.h b/marvell/linux/drivers/net/dsa/bcm_sf2_regs.h
new file mode 100644
index 0000000..d8a5e62
--- /dev/null
+++ b/marvell/linux/drivers/net/dsa/bcm_sf2_regs.h
@@ -0,0 +1,432 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Broadcom Starfighter 2 switch register defines
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ */
+#ifndef __BCM_SF2_REGS_H
+#define __BCM_SF2_REGS_H
+
+/* Register set relative to 'REG' */
+
+enum bcm_sf2_reg_offs {
+ REG_SWITCH_CNTRL = 0,
+ REG_SWITCH_STATUS,
+ REG_DIR_DATA_WRITE,
+ REG_DIR_DATA_READ,
+ REG_SWITCH_REVISION,
+ REG_PHY_REVISION,
+ REG_SPHY_CNTRL,
+ REG_RGMII_0_CNTRL,
+ REG_RGMII_1_CNTRL,
+ REG_RGMII_2_CNTRL,
+ REG_LED_0_CNTRL,
+ REG_LED_1_CNTRL,
+ REG_LED_2_CNTRL,
+ REG_SWITCH_REG_MAX,
+};
+
+/* Relative to REG_SWITCH_CNTRL */
+#define MDIO_MASTER_SEL (1 << 0)
+
+/* Relative to REG_SWITCH_REVISION */
+#define SF2_REV_MASK 0xffff
+#define SWITCH_TOP_REV_SHIFT 16
+#define SWITCH_TOP_REV_MASK 0xffff
+
+/* Relative to REG_PHY_REVISION */
+#define PHY_REVISION_MASK 0xffff
+
+/* Relative to REG_SPHY_CNTRL */
+#define IDDQ_BIAS (1 << 0)
+#define EXT_PWR_DOWN (1 << 1)
+#define FORCE_DLL_EN (1 << 2)
+#define IDDQ_GLOBAL_PWR (1 << 3)
+#define CK25_DIS (1 << 4)
+#define PHY_RESET (1 << 5)
+#define PHY_PHYAD_SHIFT 8
+#define PHY_PHYAD_MASK 0x1F
+
+#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_CNTRL + (x))
+
+/* Relative to REG_RGMII_CNTRL */
+#define RGMII_MODE_EN (1 << 0)
+#define ID_MODE_DIS (1 << 1)
+#define PORT_MODE_SHIFT 2
+#define INT_EPHY (0 << PORT_MODE_SHIFT)
+#define INT_GPHY (1 << PORT_MODE_SHIFT)
+#define EXT_EPHY (2 << PORT_MODE_SHIFT)
+#define EXT_GPHY (3 << PORT_MODE_SHIFT)
+#define EXT_REVMII (4 << PORT_MODE_SHIFT)
+#define PORT_MODE_MASK 0x7
+#define RVMII_REF_SEL (1 << 5)
+#define RX_PAUSE_EN (1 << 6)
+#define TX_PAUSE_EN (1 << 7)
+#define TX_CLK_STOP_EN (1 << 8)
+#define LPI_COUNT_SHIFT 9
+#define LPI_COUNT_MASK 0x3F
+
+#define REG_LED_CNTRL(x) (REG_LED_0_CNTRL + (x))
+
+#define SPDLNK_SRC_SEL (1 << 24)
+
+/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
+#define INTRL2_CPU_STATUS 0x00
+#define INTRL2_CPU_SET 0x04
+#define INTRL2_CPU_CLEAR 0x08
+#define INTRL2_CPU_MASK_STATUS 0x0c
+#define INTRL2_CPU_MASK_SET 0x10
+#define INTRL2_CPU_MASK_CLEAR 0x14
+
+/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
+#define P_LINK_UP_IRQ(x) (1 << (0 + (x)))
+#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x)))
+#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x)))
+#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x)))
+#define P_GPHY_IRQ(x) (1 << (4 + (x)))
+#define P_NUM_IRQ 5
+#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \
+ P_LINK_DOWN_IRQ((x)) | \
+ P_ENERGY_ON_IRQ((x)) | \
+ P_ENERGY_OFF_IRQ((x)) | \
+ P_GPHY_IRQ((x)))
+
+/* INTRL2_0 interrupt sources */
+#define P0_IRQ_OFF 0
+#define MEM_DOUBLE_IRQ (1 << 5)
+#define EEE_LPI_IRQ (1 << 6)
+#define P5_CPU_WAKE_IRQ (1 << 7)
+#define P8_CPU_WAKE_IRQ (1 << 8)
+#define P7_CPU_WAKE_IRQ (1 << 9)
+#define IEEE1588_IRQ (1 << 10)
+#define MDIO_ERR_IRQ (1 << 11)
+#define MDIO_DONE_IRQ (1 << 12)
+#define GISB_ERR_IRQ (1 << 13)
+#define UBUS_ERR_IRQ (1 << 14)
+#define FAILOVER_ON_IRQ (1 << 15)
+#define FAILOVER_OFF_IRQ (1 << 16)
+#define TCAM_SOFT_ERR_IRQ (1 << 17)
+
+/* INTRL2_1 interrupt sources */
+#define P7_IRQ_OFF 0
+#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ)
+
+/* Register set relative to 'ACB' */
+#define ACB_CONTROL 0x00
+#define ACB_EN (1 << 0)
+#define ACB_ALGORITHM (1 << 1)
+#define ACB_FLUSH_SHIFT 2
+#define ACB_FLUSH_MASK 0x3
+
+#define ACB_QUEUE_0_CFG 0x08
+#define XOFF_THRESHOLD_MASK 0x7ff
+#define XON_EN (1 << 11)
+#define TOTAL_XOFF_THRESHOLD_SHIFT 12
+#define TOTAL_XOFF_THRESHOLD_MASK 0x7ff
+#define TOTAL_XOFF_EN (1 << 23)
+#define TOTAL_XON_EN (1 << 24)
+#define PKTLEN_SHIFT 25
+#define PKTLEN_MASK 0x3f
+#define ACB_QUEUE_CFG(x) (ACB_QUEUE_0_CFG + ((x) * 0x4))
+
+/* Register set relative to 'CORE' */
+#define CORE_G_PCTL_PORT0 0x00000
+#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4))
+#define CORE_IMP_CTL 0x00020
+#define RX_DIS (1 << 0)
+#define TX_DIS (1 << 1)
+#define RX_BCST_EN (1 << 2)
+#define RX_MCST_EN (1 << 3)
+#define RX_UCST_EN (1 << 4)
+
+#define CORE_SWMODE 0x0002c
+#define SW_FWDG_MODE (1 << 0)
+#define SW_FWDG_EN (1 << 1)
+#define RTRY_LMT_DIS (1 << 2)
+
+#define CORE_STS_OVERRIDE_IMP 0x00038
+#define GMII_SPEED_UP_2G (1 << 6)
+#define MII_SW_OR (1 << 7)
+
+/* Alternate layout for e.g: 7278 */
+#define CORE_STS_OVERRIDE_IMP2 0x39040
+
+#define CORE_NEW_CTRL 0x00084
+#define IP_MC (1 << 0)
+#define OUTRANGEERR_DISCARD (1 << 1)
+#define INRANGEERR_DISCARD (1 << 2)
+#define CABLE_DIAG_LEN (1 << 3)
+#define OVERRIDE_AUTO_PD_WAR (1 << 4)
+#define EN_AUTO_PD_WAR (1 << 5)
+#define UC_FWD_EN (1 << 6)
+#define MC_FWD_EN (1 << 7)
+
+#define CORE_SWITCH_CTRL 0x00088
+#define MII_DUMB_FWDG_EN (1 << 6)
+
+#define CORE_DIS_LEARN 0x000f0
+
+#define CORE_SFT_LRN_CTRL 0x000f8
+#define SW_LEARN_CNTL(x) (1 << (x))
+
+#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
+#define CORE_STS_OVERRIDE_GMIIP2_PORT(x) (0x39000 + (x) * 8)
+#define LINK_STS (1 << 0)
+#define DUPLX_MODE (1 << 1)
+#define SPEED_SHIFT 2
+#define SPEED_MASK 0x3
+#define RXFLOW_CNTL (1 << 4)
+#define TXFLOW_CNTL (1 << 5)
+#define SW_OVERRIDE (1 << 6)
+
+#define CORE_WATCHDOG_CTRL 0x001e4
+#define SOFTWARE_RESET (1 << 7)
+#define EN_CHIP_RST (1 << 6)
+#define EN_SW_RESET (1 << 4)
+
+#define CORE_FAST_AGE_CTRL 0x00220
+#define EN_FAST_AGE_STATIC (1 << 0)
+#define EN_AGE_DYNAMIC (1 << 1)
+#define EN_AGE_PORT (1 << 2)
+#define EN_AGE_VLAN (1 << 3)
+#define EN_AGE_SPT (1 << 4)
+#define EN_AGE_MCAST (1 << 5)
+#define FAST_AGE_STR_DONE (1 << 7)
+
+#define CORE_FAST_AGE_PORT 0x00224
+#define AGE_PORT_MASK 0xf
+
+#define CORE_FAST_AGE_VID 0x00228
+#define AGE_VID_MASK 0x3fff
+
+#define CORE_LNKSTS 0x00400
+#define LNK_STS_MASK 0x1ff
+
+#define CORE_SPDSTS 0x00410
+#define SPDSTS_10 0
+#define SPDSTS_100 1
+#define SPDSTS_1000 2
+#define SPDSTS_SHIFT 2
+#define SPDSTS_MASK 0x3
+
+#define CORE_DUPSTS 0x00420
+#define CORE_DUPSTS_MASK 0x1ff
+
+#define CORE_PAUSESTS 0x00428
+#define PAUSESTS_TX_PAUSE_SHIFT 9
+
+#define CORE_GMNCFGCFG 0x0800
+#define RST_MIB_CNT (1 << 0)
+#define RXBPDU_EN (1 << 1)
+
+#define CORE_IMP0_PRT_ID 0x0804
+
+#define CORE_RST_MIB_CNT_EN 0x0950
+
+#define CORE_ARLA_VTBL_RWCTRL 0x1600
+#define ARLA_VTBL_CMD_WRITE 0
+#define ARLA_VTBL_CMD_READ 1
+#define ARLA_VTBL_CMD_CLEAR 2
+#define ARLA_VTBL_STDN (1 << 7)
+
+#define CORE_ARLA_VTBL_ADDR 0x1604
+#define VTBL_ADDR_INDEX_MASK 0xfff
+
+#define CORE_ARLA_VTBL_ENTRY 0x160c
+#define FWD_MAP_MASK 0x1ff
+#define UNTAG_MAP_MASK 0x1ff
+#define UNTAG_MAP_SHIFT 9
+#define MSTP_INDEX_MASK 0x7
+#define MSTP_INDEX_SHIFT 18
+#define FWD_MODE (1 << 21)
+
+#define CORE_MEM_PSM_VDD_CTRL 0x2380
+#define P_TXQ_PSM_VDD_SHIFT 2
+#define P_TXQ_PSM_VDD_MASK 0x3
+#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
+ ((x) * P_TXQ_PSM_VDD_SHIFT))
+
+#define CORE_PORT_TC2_QOS_MAP_PORT(x) (0xc1c0 + ((x) * 0x10))
+#define PRT_TO_QID_MASK 0x3
+#define PRT_TO_QID_SHIFT 3
+
+#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
+#define PORT_VLAN_CTRL_MASK 0x1ff
+
+#define CORE_TXQ_THD_PAUSE_QN_PORT_0 0x2c80
+#define TXQ_PAUSE_THD_MASK 0x7ff
+#define CORE_TXQ_THD_PAUSE_QN_PORT(x) (CORE_TXQ_THD_PAUSE_QN_PORT_0 + \
+ (x) * 0x8)
+
+#define CORE_DEFAULT_1Q_TAG_P(x) (0xd040 + ((x) * 8))
+#define CFI_SHIFT 12
+#define PRI_SHIFT 13
+#define PRI_MASK 0x7
+
+#define CORE_JOIN_ALL_VLAN_EN 0xd140
+
+#define CORE_CFP_ACC 0x28000
+#define OP_STR_DONE (1 << 0)
+#define OP_SEL_SHIFT 1
+#define OP_SEL_READ (1 << OP_SEL_SHIFT)
+#define OP_SEL_WRITE (2 << OP_SEL_SHIFT)
+#define OP_SEL_SEARCH (4 << OP_SEL_SHIFT)
+#define OP_SEL_MASK (7 << OP_SEL_SHIFT)
+#define CFP_RAM_CLEAR (1 << 4)
+#define RAM_SEL_SHIFT 10
+#define TCAM_SEL (1 << RAM_SEL_SHIFT)
+#define ACT_POL_RAM (2 << RAM_SEL_SHIFT)
+#define RATE_METER_RAM (4 << RAM_SEL_SHIFT)
+#define GREEN_STAT_RAM (8 << RAM_SEL_SHIFT)
+#define YELLOW_STAT_RAM (16 << RAM_SEL_SHIFT)
+#define RED_STAT_RAM (24 << RAM_SEL_SHIFT)
+#define RAM_SEL_MASK (0x1f << RAM_SEL_SHIFT)
+#define TCAM_RESET (1 << 15)
+#define XCESS_ADDR_SHIFT 16
+#define XCESS_ADDR_MASK 0xff
+#define SEARCH_STS (1 << 27)
+#define RD_STS_SHIFT 28
+#define RD_STS_TCAM (1 << RD_STS_SHIFT)
+#define RD_STS_ACT_POL_RAM (2 << RD_STS_SHIFT)
+#define RD_STS_RATE_METER_RAM (4 << RD_STS_SHIFT)
+#define RD_STS_STAT_RAM (8 << RD_STS_SHIFT)
+
+#define CORE_CFP_RATE_METER_GLOBAL_CTL 0x28010
+
+#define CORE_CFP_DATA_PORT_0 0x28040
+#define CORE_CFP_DATA_PORT(x) (CORE_CFP_DATA_PORT_0 + \
+ (x) * 0x10)
+
+/* UDF_DATA7 */
+#define L3_FRAMING_SHIFT 24
+#define L3_FRAMING_MASK (0x3 << L3_FRAMING_SHIFT)
+#define IPTOS_SHIFT 16
+#define IPTOS_MASK 0xff
+#define IPPROTO_SHIFT 8
+#define IPPROTO_MASK (0xff << IPPROTO_SHIFT)
+#define IP_FRAG_SHIFT 7
+#define IP_FRAG (1 << IP_FRAG_SHIFT)
+
+/* UDF_DATA0 */
+#define SLICE_VALID 3
+#define SLICE_NUM_SHIFT 2
+#define SLICE_NUM(x) ((x) << SLICE_NUM_SHIFT)
+#define SLICE_NUM_MASK 0x3
+
+#define CORE_CFP_MASK_PORT_0 0x280c0
+
+#define CORE_CFP_MASK_PORT(x) (CORE_CFP_MASK_PORT_0 + \
+ (x) * 0x10)
+
+#define CORE_ACT_POL_DATA0 0x28140
+#define VLAN_BYP (1 << 0)
+#define EAP_BYP (1 << 1)
+#define STP_BYP (1 << 2)
+#define REASON_CODE_SHIFT 3
+#define REASON_CODE_MASK 0x3f
+#define LOOP_BK_EN (1 << 9)
+#define NEW_TC_SHIFT 10
+#define NEW_TC_MASK 0x7
+#define CHANGE_TC (1 << 13)
+#define DST_MAP_IB_SHIFT 14
+#define DST_MAP_IB_MASK 0x1ff
+#define CHANGE_FWRD_MAP_IB_SHIFT 24
+#define CHANGE_FWRD_MAP_IB_MASK 0x3
+#define CHANGE_FWRD_MAP_IB_NO_DEST (0 << CHANGE_FWRD_MAP_IB_SHIFT)
+#define CHANGE_FWRD_MAP_IB_REM_ARL (1 << CHANGE_FWRD_MAP_IB_SHIFT)
+#define CHANGE_FWRD_MAP_IB_REP_ARL (2 << CHANGE_FWRD_MAP_IB_SHIFT)
+#define CHANGE_FWRD_MAP_IB_ADD_DST (3 << CHANGE_FWRD_MAP_IB_SHIFT)
+#define NEW_DSCP_IB_SHIFT 26
+#define NEW_DSCP_IB_MASK 0x3f
+
+#define CORE_ACT_POL_DATA1 0x28150
+#define CHANGE_DSCP_IB (1 << 0)
+#define DST_MAP_OB_SHIFT 1
+#define DST_MAP_OB_MASK 0x3ff
+#define CHANGE_FWRD_MAP_OB_SHIT 11
+#define CHANGE_FWRD_MAP_OB_MASK 0x3
+#define NEW_DSCP_OB_SHIFT 13
+#define NEW_DSCP_OB_MASK 0x3f
+#define CHANGE_DSCP_OB (1 << 19)
+#define CHAIN_ID_SHIFT 20
+#define CHAIN_ID_MASK 0xff
+#define CHANGE_COLOR (1 << 28)
+#define NEW_COLOR_SHIFT 29
+#define NEW_COLOR_MASK 0x3
+#define NEW_COLOR_GREEN (0 << NEW_COLOR_SHIFT)
+#define NEW_COLOR_YELLOW (1 << NEW_COLOR_SHIFT)
+#define NEW_COLOR_RED (2 << NEW_COLOR_SHIFT)
+#define RED_DEFAULT (1 << 31)
+
+#define CORE_ACT_POL_DATA2 0x28160
+#define MAC_LIMIT_BYPASS (1 << 0)
+#define CHANGE_TC_O (1 << 1)
+#define NEW_TC_O_SHIFT 2
+#define NEW_TC_O_MASK 0x7
+#define SPCP_RMK_DISABLE (1 << 5)
+#define CPCP_RMK_DISABLE (1 << 6)
+#define DEI_RMK_DISABLE (1 << 7)
+
+#define CORE_RATE_METER0 0x28180
+#define COLOR_MODE (1 << 0)
+#define POLICER_ACTION (1 << 1)
+#define COUPLING_FLAG (1 << 2)
+#define POLICER_MODE_SHIFT 3
+#define POLICER_MODE_MASK 0x3
+#define POLICER_MODE_RFC2698 (0 << POLICER_MODE_SHIFT)
+#define POLICER_MODE_RFC4115 (1 << POLICER_MODE_SHIFT)
+#define POLICER_MODE_MEF (2 << POLICER_MODE_SHIFT)
+#define POLICER_MODE_DISABLE (3 << POLICER_MODE_SHIFT)
+
+#define CORE_RATE_METER1 0x28190
+#define EIR_TK_BKT_MASK 0x7fffff
+
+#define CORE_RATE_METER2 0x281a0
+#define EIR_BKT_SIZE_MASK 0xfffff
+
+#define CORE_RATE_METER3 0x281b0
+#define EIR_REF_CNT_MASK 0x7ffff
+
+#define CORE_RATE_METER4 0x281c0
+#define CIR_TK_BKT_MASK 0x7fffff
+
+#define CORE_RATE_METER5 0x281d0
+#define CIR_BKT_SIZE_MASK 0xfffff
+
+#define CORE_RATE_METER6 0x281e0
+#define CIR_REF_CNT_MASK 0x7ffff
+
+#define CORE_STAT_GREEN_CNTR 0x28200
+#define CORE_STAT_YELLOW_CNTR 0x28210
+#define CORE_STAT_RED_CNTR 0x28220
+
+#define CORE_CFP_CTL_REG 0x28400
+#define CFP_EN_MAP_MASK 0x1ff
+
+/* IPv4 slices, 3 of them */
+#define CORE_UDF_0_A_0_8_PORT_0 0x28440
+#define CFG_UDF_OFFSET_MASK 0x1f
+#define CFG_UDF_OFFSET_BASE_SHIFT 5
+#define CFG_UDF_SOF (0 << CFG_UDF_OFFSET_BASE_SHIFT)
+#define CFG_UDF_EOL2 (2 << CFG_UDF_OFFSET_BASE_SHIFT)
+#define CFG_UDF_EOL3 (3 << CFG_UDF_OFFSET_BASE_SHIFT)
+
+/* IPv6 slices */
+#define CORE_UDF_0_B_0_8_PORT_0 0x28500
+
+/* IPv6 chained slices */
+#define CORE_UDF_0_D_0_11_PORT_0 0x28680
+
+/* Number of slices for IPv4, IPv6 and non-IP */
+#define UDF_NUM_SLICES 4
+#define UDFS_PER_SLICE 9
+
+/* Spacing between different slices */
+#define UDF_SLICE_OFFSET 0x40
+
+#define CFP_NUM_RULES 256
+
+/* Number of egress queues per port */
+#define SF2_NUM_EGRESS_QUEUES 8
+
+#endif /* __BCM_SF2_REGS_H */