ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/net/phy/phylink.c b/marvell/linux/drivers/net/phy/phylink.c
new file mode 100644
index 0000000..496c95e
--- /dev/null
+++ b/marvell/linux/drivers/net/phy/phylink.c
@@ -0,0 +1,1947 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phylink models the MAC to optional PHY connection, supporting
+ * technologies such as SFP cages where the PHY is hot-pluggable.
+ *
+ * Copyright (C) 2015 Russell King
+ */
+#include <linux/ethtool.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/phylink.h>
+#include <linux/rtnetlink.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+
+#include "sfp.h"
+#include "swphy.h"
+
+#define SUPPORTED_INTERFACES \
+ (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
+ SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
+#define ADVERTISED_INTERFACES \
+ (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
+ ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
+
+enum {
+ PHYLINK_DISABLE_STOPPED,
+ PHYLINK_DISABLE_LINK,
+};
+
+/**
+ * struct phylink - internal data type for phylink
+ */
+struct phylink {
+ /* private: */
+ struct net_device *netdev;
+ const struct phylink_mac_ops *ops;
+ struct phylink_config *config;
+ struct device *dev;
+ unsigned int old_link_state:1;
+
+ unsigned long phylink_disable_state; /* bitmask of disables */
+ struct phy_device *phydev;
+ phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
+ u8 cfg_link_an_mode; /* MLO_AN_xxx */
+ u8 cur_link_an_mode;
+ u8 link_port; /* The current non-phy ethtool port */
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+
+ /* The link configuration settings */
+ struct phylink_link_state link_config;
+
+ /* The current settings */
+ phy_interface_t cur_interface;
+
+ struct gpio_desc *link_gpio;
+ unsigned int link_irq;
+ struct timer_list link_poll;
+ void (*get_fixed_state)(struct net_device *dev,
+ struct phylink_link_state *s);
+
+ struct mutex state_mutex;
+ struct phylink_link_state phy_state;
+ struct work_struct resolve;
+
+ bool mac_link_dropped;
+
+ struct sfp_bus *sfp_bus;
+ bool sfp_may_have_phy;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
+ u8 sfp_port;
+};
+
+#define phylink_printk(level, pl, fmt, ...) \
+ do { \
+ if ((pl)->config->type == PHYLINK_NETDEV) \
+ netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
+ else if ((pl)->config->type == PHYLINK_DEV) \
+ dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
+ } while (0)
+
+#define phylink_err(pl, fmt, ...) \
+ phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__)
+#define phylink_warn(pl, fmt, ...) \
+ phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__)
+#define phylink_info(pl, fmt, ...) \
+ phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__)
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define phylink_dbg(pl, fmt, ...) \
+do { \
+ if ((pl)->config->type == PHYLINK_NETDEV) \
+ netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \
+ else if ((pl)->config->type == PHYLINK_DEV) \
+ dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \
+} while (0)
+#elif defined(DEBUG)
+#define phylink_dbg(pl, fmt, ...) \
+ phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__)
+#else
+#define phylink_dbg(pl, fmt, ...) \
+({ \
+ if (0) \
+ phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \
+})
+#endif
+
+/**
+ * phylink_set_port_modes() - set the port type modes in the ethtool mask
+ * @mask: ethtool link mode mask
+ *
+ * Sets all the port type modes in the ethtool mask. MAC drivers should
+ * use this in their 'validate' callback.
+ */
+void phylink_set_port_modes(unsigned long *mask)
+{
+ phylink_set(mask, TP);
+ phylink_set(mask, AUI);
+ phylink_set(mask, MII);
+ phylink_set(mask, FIBRE);
+ phylink_set(mask, BNC);
+ phylink_set(mask, Backplane);
+}
+EXPORT_SYMBOL_GPL(phylink_set_port_modes);
+
+static int phylink_is_empty_linkmode(const unsigned long *linkmode)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
+
+ phylink_set_port_modes(tmp);
+ phylink_set(tmp, Autoneg);
+ phylink_set(tmp, Pause);
+ phylink_set(tmp, Asym_Pause);
+
+ bitmap_andnot(tmp, linkmode, tmp, __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ return linkmode_empty(tmp);
+}
+
+static const char *phylink_an_mode_str(unsigned int mode)
+{
+ static const char *modestr[] = {
+ [MLO_AN_PHY] = "phy",
+ [MLO_AN_FIXED] = "fixed",
+ [MLO_AN_INBAND] = "inband",
+ };
+
+ return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
+}
+
+static int phylink_validate(struct phylink *pl, unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ pl->ops->validate(pl->config, supported, state);
+
+ return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
+}
+
+static int phylink_parse_fixedlink(struct phylink *pl,
+ struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *fixed_node;
+ const struct phy_setting *s;
+ struct gpio_desc *desc;
+ u32 speed;
+ int ret;
+
+ fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
+ if (fixed_node) {
+ ret = fwnode_property_read_u32(fixed_node, "speed", &speed);
+
+ pl->link_config.speed = speed;
+ pl->link_config.duplex = DUPLEX_HALF;
+
+ if (fwnode_property_read_bool(fixed_node, "full-duplex"))
+ pl->link_config.duplex = DUPLEX_FULL;
+
+ /* We treat the "pause" and "asym-pause" terminology as
+ * defining the link partner's ability. */
+ if (fwnode_property_read_bool(fixed_node, "pause"))
+ pl->link_config.pause |= MLO_PAUSE_SYM;
+ if (fwnode_property_read_bool(fixed_node, "asym-pause"))
+ pl->link_config.pause |= MLO_PAUSE_ASYM;
+
+ if (ret == 0) {
+ desc = fwnode_get_named_gpiod(fixed_node, "link-gpios",
+ 0, GPIOD_IN, "?");
+
+ if (!IS_ERR(desc))
+ pl->link_gpio = desc;
+ else if (desc == ERR_PTR(-EPROBE_DEFER))
+ ret = -EPROBE_DEFER;
+ }
+ fwnode_handle_put(fixed_node);
+
+ if (ret)
+ return ret;
+ } else {
+ u32 prop[5];
+
+ ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
+ NULL, 0);
+ if (ret != ARRAY_SIZE(prop)) {
+ phylink_err(pl, "broken fixed-link?\n");
+ return -EINVAL;
+ }
+
+ ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
+ prop, ARRAY_SIZE(prop));
+ if (!ret) {
+ pl->link_config.duplex = prop[1] ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ pl->link_config.speed = prop[2];
+ if (prop[3])
+ pl->link_config.pause |= MLO_PAUSE_SYM;
+ if (prop[4])
+ pl->link_config.pause |= MLO_PAUSE_ASYM;
+ }
+ }
+
+ if (pl->link_config.speed > SPEED_1000 &&
+ pl->link_config.duplex != DUPLEX_FULL)
+ phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n",
+ pl->link_config.speed);
+
+ bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ linkmode_copy(pl->link_config.advertising, pl->supported);
+ phylink_validate(pl, pl->supported, &pl->link_config);
+
+ s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
+ pl->supported, true);
+ linkmode_zero(pl->supported);
+ phylink_set(pl->supported, MII);
+ phylink_set(pl->supported, Pause);
+ phylink_set(pl->supported, Asym_Pause);
+ if (s) {
+ __set_bit(s->bit, pl->supported);
+ } else {
+ phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
+ pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
+ pl->link_config.speed);
+ }
+
+ linkmode_and(pl->link_config.advertising, pl->link_config.advertising,
+ pl->supported);
+
+ pl->link_config.link = 1;
+ pl->link_config.an_complete = 1;
+
+ return 0;
+}
+
+static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *dn;
+ const char *managed;
+
+ dn = fwnode_get_named_child_node(fwnode, "fixed-link");
+ if (dn || fwnode_property_present(fwnode, "fixed-link"))
+ pl->cfg_link_an_mode = MLO_AN_FIXED;
+ fwnode_handle_put(dn);
+
+ if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
+ strcmp(managed, "in-band-status") == 0) {
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
+ phylink_err(pl,
+ "can't use both fixed-link and in-band-status\n");
+ return -EINVAL;
+ }
+
+ linkmode_zero(pl->supported);
+ phylink_set(pl->supported, MII);
+ phylink_set(pl->supported, Autoneg);
+ phylink_set(pl->supported, Asym_Pause);
+ phylink_set(pl->supported, Pause);
+ pl->link_config.an_enabled = true;
+ pl->cfg_link_an_mode = MLO_AN_INBAND;
+
+ switch (pl->link_config.interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ phylink_set(pl->supported, 10baseT_Half);
+ phylink_set(pl->supported, 10baseT_Full);
+ phylink_set(pl->supported, 100baseT_Half);
+ phylink_set(pl->supported, 100baseT_Full);
+ phylink_set(pl->supported, 1000baseT_Half);
+ phylink_set(pl->supported, 1000baseT_Full);
+ break;
+
+ case PHY_INTERFACE_MODE_1000BASEX:
+ phylink_set(pl->supported, 1000baseX_Full);
+ break;
+
+ case PHY_INTERFACE_MODE_2500BASEX:
+ phylink_set(pl->supported, 2500baseX_Full);
+ break;
+
+ case PHY_INTERFACE_MODE_10GKR:
+ phylink_set(pl->supported, 10baseT_Half);
+ phylink_set(pl->supported, 10baseT_Full);
+ phylink_set(pl->supported, 100baseT_Half);
+ phylink_set(pl->supported, 100baseT_Full);
+ phylink_set(pl->supported, 1000baseT_Half);
+ phylink_set(pl->supported, 1000baseT_Full);
+ phylink_set(pl->supported, 1000baseX_Full);
+ phylink_set(pl->supported, 10000baseKR_Full);
+ phylink_set(pl->supported, 10000baseCR_Full);
+ phylink_set(pl->supported, 10000baseSR_Full);
+ phylink_set(pl->supported, 10000baseLR_Full);
+ phylink_set(pl->supported, 10000baseLRM_Full);
+ phylink_set(pl->supported, 10000baseER_Full);
+ break;
+
+ default:
+ phylink_err(pl,
+ "incorrect link mode %s for in-band status\n",
+ phy_modes(pl->link_config.interface));
+ return -EINVAL;
+ }
+
+ linkmode_copy(pl->link_config.advertising, pl->supported);
+
+ if (phylink_validate(pl, pl->supported, &pl->link_config)) {
+ phylink_err(pl,
+ "failed to validate link configuration for in-band status\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void phylink_mac_config(struct phylink *pl,
+ const struct phylink_link_state *state)
+{
+ phylink_dbg(pl,
+ "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
+ __func__, phylink_an_mode_str(pl->cur_link_an_mode),
+ phy_modes(state->interface),
+ phy_speed_to_str(state->speed),
+ phy_duplex_to_str(state->duplex),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
+ state->pause, state->link, state->an_enabled);
+
+ pl->ops->mac_config(pl->config, pl->cur_link_an_mode, state);
+}
+
+static void phylink_mac_config_up(struct phylink *pl,
+ const struct phylink_link_state *state)
+{
+ if (state->link)
+ phylink_mac_config(pl, state);
+}
+
+static void phylink_mac_an_restart(struct phylink *pl)
+{
+ if (pl->link_config.an_enabled &&
+ phy_interface_mode_is_8023z(pl->link_config.interface))
+ pl->ops->mac_an_restart(pl->config);
+}
+
+static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
+{
+
+ linkmode_copy(state->advertising, pl->link_config.advertising);
+ linkmode_zero(state->lp_advertising);
+ state->interface = pl->link_config.interface;
+ state->an_enabled = pl->link_config.an_enabled;
+ state->speed = SPEED_UNKNOWN;
+ state->duplex = DUPLEX_UNKNOWN;
+ state->pause = MLO_PAUSE_NONE;
+ state->an_complete = 0;
+ state->link = 1;
+
+ return pl->ops->mac_link_state(pl->config, state);
+}
+
+/* The fixed state is... fixed except for the link state,
+ * which may be determined by a GPIO or a callback.
+ */
+static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state)
+{
+ *state = pl->link_config;
+ if (pl->get_fixed_state)
+ pl->get_fixed_state(pl->netdev, state);
+ else if (pl->link_gpio)
+ state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
+}
+
+/* Flow control is resolved according to our and the link partners
+ * advertisements using the following drawn from the 802.3 specs:
+ * Local device Link partner
+ * Pause AsymDir Pause AsymDir Result
+ * 1 X 1 X TX+RX
+ * 0 1 1 1 TX
+ * 1 1 0 1 RX
+ */
+static void phylink_resolve_flow(struct phylink *pl,
+ struct phylink_link_state *state)
+{
+ int new_pause = 0;
+
+ if (pl->link_config.pause & MLO_PAUSE_AN) {
+ int pause = 0;
+
+ if (phylink_test(pl->link_config.advertising, Pause))
+ pause |= MLO_PAUSE_SYM;
+ if (phylink_test(pl->link_config.advertising, Asym_Pause))
+ pause |= MLO_PAUSE_ASYM;
+
+ pause &= state->pause;
+
+ if (pause & MLO_PAUSE_SYM)
+ new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
+ else if (pause & MLO_PAUSE_ASYM)
+ new_pause = state->pause & MLO_PAUSE_SYM ?
+ MLO_PAUSE_TX : MLO_PAUSE_RX;
+ } else {
+ new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
+ }
+
+ state->pause &= ~MLO_PAUSE_TXRX_MASK;
+ state->pause |= new_pause;
+}
+
+static const char *phylink_pause_to_str(int pause)
+{
+ switch (pause & MLO_PAUSE_TXRX_MASK) {
+ case MLO_PAUSE_TX | MLO_PAUSE_RX:
+ return "rx/tx";
+ case MLO_PAUSE_TX:
+ return "tx";
+ case MLO_PAUSE_RX:
+ return "rx";
+ default:
+ return "off";
+ }
+}
+
+static void phylink_mac_link_up(struct phylink *pl,
+ struct phylink_link_state link_state)
+{
+ struct net_device *ndev = pl->netdev;
+
+ pl->cur_interface = link_state.interface;
+ pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
+ pl->cur_interface, pl->phydev);
+
+ if (ndev)
+ netif_carrier_on(ndev);
+
+ phylink_info(pl,
+ "Link is Up - %s/%s - flow control %s\n",
+ phy_speed_to_str(link_state.speed),
+ phy_duplex_to_str(link_state.duplex),
+ phylink_pause_to_str(link_state.pause));
+}
+
+static void phylink_mac_link_down(struct phylink *pl)
+{
+ struct net_device *ndev = pl->netdev;
+
+ if (ndev)
+ netif_carrier_off(ndev);
+ pl->ops->mac_link_down(pl->config, pl->cur_link_an_mode,
+ pl->cur_interface);
+ phylink_info(pl, "Link is Down\n");
+}
+
+static void phylink_resolve(struct work_struct *w)
+{
+ struct phylink *pl = container_of(w, struct phylink, resolve);
+ struct phylink_link_state link_state;
+ struct net_device *ndev = pl->netdev;
+ int link_changed;
+
+ mutex_lock(&pl->state_mutex);
+ if (pl->phylink_disable_state) {
+ pl->mac_link_dropped = false;
+ link_state.link = false;
+ } else if (pl->mac_link_dropped) {
+ link_state.link = false;
+ } else {
+ switch (pl->cur_link_an_mode) {
+ case MLO_AN_PHY:
+ link_state = pl->phy_state;
+ phylink_resolve_flow(pl, &link_state);
+ phylink_mac_config_up(pl, &link_state);
+ break;
+
+ case MLO_AN_FIXED:
+ phylink_get_fixed_state(pl, &link_state);
+ phylink_mac_config_up(pl, &link_state);
+ break;
+
+ case MLO_AN_INBAND:
+ phylink_get_mac_state(pl, &link_state);
+
+ /* If we have a phy, the "up" state is the union of
+ * both the PHY and the MAC */
+ if (pl->phydev)
+ link_state.link &= pl->phy_state.link;
+
+ /* Only update if the PHY link is up */
+ if (pl->phydev && pl->phy_state.link) {
+ link_state.interface = pl->phy_state.interface;
+
+ /* If we have a PHY, we need to update with
+ * the pause mode bits. */
+ link_state.pause |= pl->phy_state.pause;
+ phylink_resolve_flow(pl, &link_state);
+ phylink_mac_config(pl, &link_state);
+ }
+ break;
+ }
+ }
+
+ if (pl->netdev)
+ link_changed = (link_state.link != netif_carrier_ok(ndev));
+ else
+ link_changed = (link_state.link != pl->old_link_state);
+
+ if (link_changed) {
+ pl->old_link_state = link_state.link;
+ if (!link_state.link)
+ phylink_mac_link_down(pl);
+ else
+ phylink_mac_link_up(pl, link_state);
+ }
+ if (!link_state.link && pl->mac_link_dropped) {
+ pl->mac_link_dropped = false;
+ queue_work(system_power_efficient_wq, &pl->resolve);
+ }
+ mutex_unlock(&pl->state_mutex);
+}
+
+static void phylink_run_resolve(struct phylink *pl)
+{
+ if (!pl->phylink_disable_state)
+ queue_work(system_power_efficient_wq, &pl->resolve);
+}
+
+static void phylink_run_resolve_and_disable(struct phylink *pl, int bit)
+{
+ unsigned long state = pl->phylink_disable_state;
+
+ set_bit(bit, &pl->phylink_disable_state);
+ if (state == 0) {
+ queue_work(system_power_efficient_wq, &pl->resolve);
+ flush_work(&pl->resolve);
+ }
+}
+
+static void phylink_fixed_poll(struct timer_list *t)
+{
+ struct phylink *pl = container_of(t, struct phylink, link_poll);
+
+ mod_timer(t, jiffies + HZ);
+
+ phylink_run_resolve(pl);
+}
+
+static const struct sfp_upstream_ops sfp_phylink_ops;
+
+static int phylink_register_sfp(struct phylink *pl,
+ struct fwnode_handle *fwnode)
+{
+ struct sfp_bus *bus;
+ int ret;
+
+ bus = sfp_bus_find_fwnode(fwnode);
+ if (IS_ERR(bus)) {
+ ret = PTR_ERR(bus);
+ phylink_err(pl, "unable to attach SFP bus: %d\n", ret);
+ return ret;
+ }
+
+ pl->sfp_bus = bus;
+
+ ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops);
+ sfp_bus_put(bus);
+
+ return ret;
+}
+
+/**
+ * phylink_create() - create a phylink instance
+ * @config: a pointer to the target &struct phylink_config
+ * @fwnode: a pointer to a &struct fwnode_handle describing the network
+ * interface
+ * @iface: the desired link mode defined by &typedef phy_interface_t
+ * @ops: a pointer to a &struct phylink_mac_ops for the MAC.
+ *
+ * Create a new phylink instance, and parse the link parameters found in @np.
+ * This will parse in-band modes, fixed-link or SFP configuration.
+ *
+ * Note: the rtnl lock must not be held when calling this function.
+ *
+ * Returns a pointer to a &struct phylink, or an error-pointer value. Users
+ * must use IS_ERR() to check for errors from this function.
+ */
+struct phylink *phylink_create(struct phylink_config *config,
+ struct fwnode_handle *fwnode,
+ phy_interface_t iface,
+ const struct phylink_mac_ops *ops)
+{
+ struct phylink *pl;
+ int ret;
+
+ pl = kzalloc(sizeof(*pl), GFP_KERNEL);
+ if (!pl)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&pl->state_mutex);
+ INIT_WORK(&pl->resolve, phylink_resolve);
+
+ pl->config = config;
+ if (config->type == PHYLINK_NETDEV) {
+ pl->netdev = to_net_dev(config->dev);
+ } else if (config->type == PHYLINK_DEV) {
+ pl->dev = config->dev;
+ } else {
+ kfree(pl);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pl->phy_state.interface = iface;
+ pl->link_interface = iface;
+ if (iface == PHY_INTERFACE_MODE_MOCA)
+ pl->link_port = PORT_BNC;
+ else
+ pl->link_port = PORT_MII;
+ pl->link_config.interface = iface;
+ pl->link_config.pause = MLO_PAUSE_AN;
+ pl->link_config.speed = SPEED_UNKNOWN;
+ pl->link_config.duplex = DUPLEX_UNKNOWN;
+ pl->link_config.an_enabled = true;
+ pl->ops = ops;
+ __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
+
+ bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ linkmode_copy(pl->link_config.advertising, pl->supported);
+ phylink_validate(pl, pl->supported, &pl->link_config);
+
+ ret = phylink_parse_mode(pl, fwnode);
+ if (ret < 0) {
+ kfree(pl);
+ return ERR_PTR(ret);
+ }
+
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
+ ret = phylink_parse_fixedlink(pl, fwnode);
+ if (ret < 0) {
+ kfree(pl);
+ return ERR_PTR(ret);
+ }
+ }
+
+ pl->cur_link_an_mode = pl->cfg_link_an_mode;
+
+ ret = phylink_register_sfp(pl, fwnode);
+ if (ret < 0) {
+ kfree(pl);
+ return ERR_PTR(ret);
+ }
+
+ return pl;
+}
+EXPORT_SYMBOL_GPL(phylink_create);
+
+/**
+ * phylink_destroy() - cleanup and destroy the phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Destroy a phylink instance. Any PHY that has been attached must have been
+ * cleaned up via phylink_disconnect_phy() prior to calling this function.
+ *
+ * Note: the rtnl lock must not be held when calling this function.
+ */
+void phylink_destroy(struct phylink *pl)
+{
+ sfp_bus_del_upstream(pl->sfp_bus);
+ if (pl->link_gpio)
+ gpiod_put(pl->link_gpio);
+
+ cancel_work_sync(&pl->resolve);
+ kfree(pl);
+}
+EXPORT_SYMBOL_GPL(phylink_destroy);
+
+static void phylink_phy_change(struct phy_device *phydev, bool up,
+ bool do_carrier)
+{
+ struct phylink *pl = phydev->phylink;
+
+ mutex_lock(&pl->state_mutex);
+ pl->phy_state.speed = phydev->speed;
+ pl->phy_state.duplex = phydev->duplex;
+ pl->phy_state.pause = MLO_PAUSE_NONE;
+ if (phydev->pause)
+ pl->phy_state.pause |= MLO_PAUSE_SYM;
+ if (phydev->asym_pause)
+ pl->phy_state.pause |= MLO_PAUSE_ASYM;
+ pl->phy_state.interface = phydev->interface;
+ pl->phy_state.link = up;
+ mutex_unlock(&pl->state_mutex);
+
+ phylink_run_resolve(pl);
+
+ phylink_dbg(pl, "phy link %s %s/%s/%s\n", up ? "up" : "down",
+ phy_modes(phydev->interface),
+ phy_speed_to_str(phydev->speed),
+ phy_duplex_to_str(phydev->duplex));
+}
+
+static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
+ phy_interface_t interface)
+{
+ struct phylink_link_state config;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+ int ret;
+
+ /*
+ * This is the new way of dealing with flow control for PHYs,
+ * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
+ * phy drivers should not set SUPPORTED_[Asym_]Pause") except
+ * using our validate call to the MAC, we rely upon the MAC
+ * clearing the bits from both supported and advertising fields.
+ */
+ phy_support_asym_pause(phy);
+
+ memset(&config, 0, sizeof(config));
+ linkmode_copy(supported, phy->supported);
+ linkmode_copy(config.advertising, phy->advertising);
+ config.interface = interface;
+
+ ret = phylink_validate(pl, supported, &config);
+ if (ret)
+ return ret;
+
+ phy->phylink = pl;
+ phy->phy_link_change = phylink_phy_change;
+
+ phylink_info(pl,
+ "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
+ phy->drv->name);
+
+ mutex_lock(&phy->lock);
+ mutex_lock(&pl->state_mutex);
+ pl->phydev = phy;
+ pl->phy_state.interface = interface;
+ linkmode_copy(pl->supported, supported);
+ linkmode_copy(pl->link_config.advertising, config.advertising);
+
+ /* Restrict the phy advertisement according to the MAC support. */
+ linkmode_copy(phy->advertising, config.advertising);
+ mutex_unlock(&pl->state_mutex);
+ mutex_unlock(&phy->lock);
+
+ phylink_dbg(pl,
+ "phy: setting supported %*pb advertising %*pb\n",
+ __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
+ __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
+
+ if (phy_interrupt_is_valid(phy))
+ phy_request_interrupt(phy);
+
+ return 0;
+}
+
+static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
+ phy_interface_t interface)
+{
+ if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ phy_interface_mode_is_8023z(interface))))
+ return -EINVAL;
+
+ if (pl->phydev)
+ return -EBUSY;
+
+ return phy_attach_direct(pl->netdev, phy, 0, interface);
+}
+
+/**
+ * phylink_connect_phy() - connect a PHY to the phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @phy: a pointer to a &struct phy_device.
+ *
+ * Connect @phy to the phylink instance specified by @pl by calling
+ * phy_attach_direct(). Configure the @phy according to the MAC driver's
+ * capabilities, start the PHYLIB state machine and enable any interrupts
+ * that the PHY supports.
+ *
+ * This updates the phylink's ethtool supported and advertising link mode
+ * masks.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
+{
+ int ret;
+
+ /* Use PHY device/driver interface */
+ if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
+ pl->link_interface = phy->interface;
+ pl->link_config.interface = pl->link_interface;
+ }
+
+ ret = phylink_attach_phy(pl, phy, pl->link_interface);
+ if (ret < 0)
+ return ret;
+
+ ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
+ if (ret)
+ phy_detach(phy);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_connect_phy);
+
+/**
+ * phylink_of_phy_connect() - connect the PHY specified in the DT mode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @dn: a pointer to a &struct device_node.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified in the device node @dn to the phylink instance
+ * specified by @pl. Actions specified in phylink_connect_phy() will be
+ * performed.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
+ u32 flags)
+{
+ struct device_node *phy_node;
+ struct phy_device *phy_dev;
+ int ret;
+
+ /* Fixed links and 802.3z are handled without needing a PHY */
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ phy_interface_mode_is_8023z(pl->link_interface)))
+ return 0;
+
+ phy_node = of_parse_phandle(dn, "phy-handle", 0);
+ if (!phy_node)
+ phy_node = of_parse_phandle(dn, "phy", 0);
+ if (!phy_node)
+ phy_node = of_parse_phandle(dn, "phy-device", 0);
+
+ if (!phy_node) {
+ if (pl->cfg_link_an_mode == MLO_AN_PHY)
+ return -ENODEV;
+ return 0;
+ }
+
+ phy_dev = of_phy_attach(pl->netdev, phy_node, flags,
+ pl->link_interface);
+ /* We're done with the phy_node handle */
+ of_node_put(phy_node);
+
+ if (!phy_dev)
+ return -ENODEV;
+
+ ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+ if (ret)
+ phy_detach(phy_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
+
+/**
+ * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
+ * instance.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Disconnect any current PHY from the phylink instance described by @pl.
+ */
+void phylink_disconnect_phy(struct phylink *pl)
+{
+ struct phy_device *phy;
+
+ ASSERT_RTNL();
+
+ phy = pl->phydev;
+ if (phy) {
+ mutex_lock(&phy->lock);
+ mutex_lock(&pl->state_mutex);
+ pl->phydev = NULL;
+ mutex_unlock(&pl->state_mutex);
+ mutex_unlock(&phy->lock);
+ flush_work(&pl->resolve);
+
+ phy_disconnect(phy);
+ }
+}
+EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
+
+/**
+ * phylink_fixed_state_cb() - allow setting a fixed link callback
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @cb: callback to execute to determine the fixed link state.
+ *
+ * The MAC driver should call this driver when the state of its link
+ * can be determined through e.g: an out of band MMIO register.
+ */
+int phylink_fixed_state_cb(struct phylink *pl,
+ void (*cb)(struct net_device *dev,
+ struct phylink_link_state *state))
+{
+ /* It does not make sense to let the link be overriden unless we use
+ * MLO_AN_FIXED
+ */
+ if (pl->cfg_link_an_mode != MLO_AN_FIXED)
+ return -EINVAL;
+
+ mutex_lock(&pl->state_mutex);
+ pl->get_fixed_state = cb;
+ mutex_unlock(&pl->state_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(phylink_fixed_state_cb);
+
+/**
+ * phylink_mac_change() - notify phylink of a change in MAC state
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @up: indicates whether the link is currently up.
+ *
+ * The MAC driver should call this driver when the state of its link
+ * changes (eg, link failure, new negotiation results, etc.)
+ */
+void phylink_mac_change(struct phylink *pl, bool up)
+{
+ if (!up)
+ pl->mac_link_dropped = true;
+ phylink_run_resolve(pl);
+ phylink_dbg(pl, "mac link %s\n", up ? "up" : "down");
+}
+EXPORT_SYMBOL_GPL(phylink_mac_change);
+
+static irqreturn_t phylink_link_handler(int irq, void *data)
+{
+ struct phylink *pl = data;
+
+ phylink_run_resolve(pl);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * phylink_start() - start a phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Start the phylink instance specified by @pl, configuring the MAC for the
+ * desired link mode(s) and negotiation style. This should be called from the
+ * network device driver's &struct net_device_ops ndo_open() method.
+ */
+void phylink_start(struct phylink *pl)
+{
+ ASSERT_RTNL();
+
+ phylink_info(pl, "configuring for %s/%s link mode\n",
+ phylink_an_mode_str(pl->cur_link_an_mode),
+ phy_modes(pl->link_config.interface));
+
+ /* Always set the carrier off */
+ if (pl->netdev)
+ netif_carrier_off(pl->netdev);
+
+ /* Apply the link configuration to the MAC when starting. This allows
+ * a fixed-link to start with the correct parameters, and also
+ * ensures that we set the appropriate advertisement for Serdes links.
+ */
+ phylink_resolve_flow(pl, &pl->link_config);
+ phylink_mac_config(pl, &pl->link_config);
+
+ /* Restart autonegotiation if using 802.3z to ensure that the link
+ * parameters are properly negotiated. This is necessary for DSA
+ * switches using 802.3z negotiation to ensure they see our modes.
+ */
+ phylink_mac_an_restart(pl);
+
+ clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ phylink_run_resolve(pl);
+
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
+ int irq = gpiod_to_irq(pl->link_gpio);
+
+ if (irq > 0) {
+ if (!request_irq(irq, phylink_link_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "netdev link", pl))
+ pl->link_irq = irq;
+ else
+ irq = 0;
+ }
+ if (irq <= 0)
+ mod_timer(&pl->link_poll, jiffies + HZ);
+ }
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
+ mod_timer(&pl->link_poll, jiffies + HZ);
+ if (pl->phydev)
+ phy_start(pl->phydev);
+ if (pl->sfp_bus)
+ sfp_upstream_start(pl->sfp_bus);
+}
+EXPORT_SYMBOL_GPL(phylink_start);
+
+/**
+ * phylink_stop() - stop a phylink instance
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Stop the phylink instance specified by @pl. This should be called from the
+ * network device driver's &struct net_device_ops ndo_stop() method. The
+ * network device's carrier state should not be changed prior to calling this
+ * function.
+ */
+void phylink_stop(struct phylink *pl)
+{
+ ASSERT_RTNL();
+
+ if (pl->sfp_bus)
+ sfp_upstream_stop(pl->sfp_bus);
+ if (pl->phydev)
+ phy_stop(pl->phydev);
+ del_timer_sync(&pl->link_poll);
+ if (pl->link_irq) {
+ free_irq(pl->link_irq, pl);
+ pl->link_irq = 0;
+ }
+
+ phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
+}
+EXPORT_SYMBOL_GPL(phylink_stop);
+
+/**
+ * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters
+ *
+ * Read the wake on lan parameters from the PHY attached to the phylink
+ * instance specified by @pl. If no PHY is currently attached, report no
+ * support for wake on lan.
+ */
+void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
+{
+ ASSERT_RTNL();
+
+ wol->supported = 0;
+ wol->wolopts = 0;
+
+ if (pl->phydev)
+ phy_ethtool_get_wol(pl->phydev, wol);
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
+
+/**
+ * phylink_ethtool_set_wol() - set wake on lan parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters
+ *
+ * Set the wake on lan parameters for the PHY attached to the phylink
+ * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP
+ * error.
+ *
+ * Returns zero on success or negative errno code.
+ */
+int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
+{
+ int ret = -EOPNOTSUPP;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev)
+ ret = phy_ethtool_set_wol(pl->phydev, wol);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol);
+
+static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
+
+ linkmode_zero(mask);
+ phylink_set_port_modes(mask);
+
+ linkmode_and(dst, dst, mask);
+ linkmode_or(dst, dst, b);
+}
+
+static void phylink_get_ksettings(const struct phylink_link_state *state,
+ struct ethtool_link_ksettings *kset)
+{
+ phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
+ linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
+ kset->base.speed = state->speed;
+ kset->base.duplex = state->duplex;
+ kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
+ AUTONEG_DISABLE;
+}
+
+/**
+ * phylink_ethtool_ksettings_get() - get the current link settings
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings
+ *
+ * Read the current link settings for the phylink instance specified by @pl.
+ * This will be the link settings read from the MAC, PHY or fixed link
+ * settings depending on the current negotiation mode.
+ */
+int phylink_ethtool_ksettings_get(struct phylink *pl,
+ struct ethtool_link_ksettings *kset)
+{
+ struct phylink_link_state link_state;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev) {
+ phy_ethtool_ksettings_get(pl->phydev, kset);
+ } else {
+ kset->base.port = pl->link_port;
+ }
+
+ linkmode_copy(kset->link_modes.supported, pl->supported);
+
+ switch (pl->cur_link_an_mode) {
+ case MLO_AN_FIXED:
+ /* We are using fixed settings. Report these as the
+ * current link settings - and note that these also
+ * represent the supported speeds/duplex/pause modes.
+ */
+ phylink_get_fixed_state(pl, &link_state);
+ phylink_get_ksettings(&link_state, kset);
+ break;
+
+ case MLO_AN_INBAND:
+ /* If there is a phy attached, then use the reported
+ * settings from the phy with no modification.
+ */
+ if (pl->phydev)
+ break;
+
+ phylink_get_mac_state(pl, &link_state);
+
+ /* The MAC is reporting the link results from its own PCS
+ * layer via in-band status. Report these as the current
+ * link settings.
+ */
+ phylink_get_ksettings(&link_state, kset);
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
+
+/**
+ * phylink_ethtool_ksettings_set() - set the link settings
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes
+ */
+int phylink_ethtool_ksettings_set(struct phylink *pl,
+ const struct ethtool_link_ksettings *kset)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+ struct ethtool_link_ksettings our_kset;
+ struct phylink_link_state config;
+ int ret;
+
+ ASSERT_RTNL();
+
+ if (kset->base.autoneg != AUTONEG_DISABLE &&
+ kset->base.autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+
+ linkmode_copy(support, pl->supported);
+ config = pl->link_config;
+
+ /* Mask out unsupported advertisements */
+ linkmode_and(config.advertising, kset->link_modes.advertising,
+ support);
+
+ /* FIXME: should we reject autoneg if phy/mac does not support it? */
+ if (kset->base.autoneg == AUTONEG_DISABLE) {
+ const struct phy_setting *s;
+
+ /* Autonegotiation disabled, select a suitable speed and
+ * duplex.
+ */
+ s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
+ support, false);
+ if (!s)
+ return -EINVAL;
+
+ /* If we have a fixed link (as specified by firmware), refuse
+ * to change link parameters.
+ */
+ if (pl->cur_link_an_mode == MLO_AN_FIXED &&
+ (s->speed != pl->link_config.speed ||
+ s->duplex != pl->link_config.duplex))
+ return -EINVAL;
+
+ config.speed = s->speed;
+ config.duplex = s->duplex;
+ config.an_enabled = false;
+
+ __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
+ } else {
+ /* If we have a fixed link, refuse to enable autonegotiation */
+ if (pl->cur_link_an_mode == MLO_AN_FIXED)
+ return -EINVAL;
+
+ config.speed = SPEED_UNKNOWN;
+ config.duplex = DUPLEX_UNKNOWN;
+ config.an_enabled = true;
+
+ __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
+ }
+
+ if (phylink_validate(pl, support, &config))
+ return -EINVAL;
+
+ /* If autonegotiation is enabled, we must have an advertisement */
+ if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
+ return -EINVAL;
+
+ our_kset = *kset;
+ linkmode_copy(our_kset.link_modes.advertising, config.advertising);
+ our_kset.base.speed = config.speed;
+ our_kset.base.duplex = config.duplex;
+
+ /* If we have a PHY, configure the phy */
+ if (pl->phydev) {
+ ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
+ if (ret)
+ return ret;
+ }
+
+ mutex_lock(&pl->state_mutex);
+ /* Configure the MAC to match the new settings */
+ linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
+ pl->link_config.interface = config.interface;
+ pl->link_config.speed = our_kset.base.speed;
+ pl->link_config.duplex = our_kset.base.duplex;
+ pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
+
+ /* If we have a PHY, phylib will call our link state function if the
+ * mode has changed, which will trigger a resolve and update the MAC
+ * configuration. For a fixed link, this isn't able to change any
+ * parameters, which just leaves inband mode.
+ */
+ if (pl->cur_link_an_mode == MLO_AN_INBAND &&
+ !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
+ phylink_mac_config(pl, &pl->link_config);
+ phylink_mac_an_restart(pl);
+ }
+ mutex_unlock(&pl->state_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
+
+/**
+ * phylink_ethtool_nway_reset() - restart negotiation
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Restart negotiation for the phylink instance specified by @pl. This will
+ * cause any attached phy to restart negotiation with the link partner, and
+ * if the MAC is in a BaseX mode, the MAC will also be requested to restart
+ * negotiation.
+ *
+ * Returns zero on success, or negative error code.
+ */
+int phylink_ethtool_nway_reset(struct phylink *pl)
+{
+ int ret = 0;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev)
+ ret = phy_restart_aneg(pl->phydev);
+ phylink_mac_an_restart(pl);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
+
+/**
+ * phylink_ethtool_get_pauseparam() - get the current pause parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @pause: a pointer to a &struct ethtool_pauseparam
+ */
+void phylink_ethtool_get_pauseparam(struct phylink *pl,
+ struct ethtool_pauseparam *pause)
+{
+ ASSERT_RTNL();
+
+ pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN);
+ pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX);
+ pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX);
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam);
+
+/**
+ * phylink_ethtool_set_pauseparam() - set the current pause parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @pause: a pointer to a &struct ethtool_pauseparam
+ */
+int phylink_ethtool_set_pauseparam(struct phylink *pl,
+ struct ethtool_pauseparam *pause)
+{
+ struct phylink_link_state *config = &pl->link_config;
+
+ ASSERT_RTNL();
+
+ if (!phylink_test(pl->supported, Pause) &&
+ !phylink_test(pl->supported, Asym_Pause))
+ return -EOPNOTSUPP;
+
+ if (!phylink_test(pl->supported, Asym_Pause) &&
+ pause->rx_pause != pause->tx_pause)
+ return -EINVAL;
+
+ config->pause &= ~(MLO_PAUSE_AN | MLO_PAUSE_TXRX_MASK);
+
+ if (pause->autoneg)
+ config->pause |= MLO_PAUSE_AN;
+ if (pause->rx_pause)
+ config->pause |= MLO_PAUSE_RX;
+ if (pause->tx_pause)
+ config->pause |= MLO_PAUSE_TX;
+
+ /* If we have a PHY, phylib will call our link state function if the
+ * mode has changed, which will trigger a resolve and update the MAC
+ * configuration.
+ */
+ if (pl->phydev) {
+ phy_set_asym_pause(pl->phydev, pause->rx_pause,
+ pause->tx_pause);
+ } else if (!test_bit(PHYLINK_DISABLE_STOPPED,
+ &pl->phylink_disable_state)) {
+ switch (pl->cur_link_an_mode) {
+ case MLO_AN_FIXED:
+ /* Should we allow fixed links to change against the config? */
+ phylink_resolve_flow(pl, config);
+ phylink_mac_config(pl, config);
+ break;
+
+ case MLO_AN_INBAND:
+ phylink_mac_config(pl, config);
+ phylink_mac_an_restart(pl);
+ break;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
+
+/**
+ * phylink_ethtool_get_eee_err() - read the energy efficient ethernet error
+ * counter
+ * @pl: a pointer to a &struct phylink returned from phylink_create().
+ *
+ * Read the Energy Efficient Ethernet error counter from the PHY associated
+ * with the phylink instance specified by @pl.
+ *
+ * Returns positive error counter value, or negative error code.
+ */
+int phylink_get_eee_err(struct phylink *pl)
+{
+ int ret = 0;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev)
+ ret = phy_get_eee_err(pl->phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_get_eee_err);
+
+/**
+ * phylink_init_eee() - init and check the EEE features
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @clk_stop_enable: allow PHY to stop receive clock
+ *
+ * Must be called either with RTNL held or within mac_link_up()
+ */
+int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
+{
+ int ret = -EOPNOTSUPP;
+
+ if (pl->phydev)
+ ret = phy_init_eee(pl->phydev, clk_stop_enable);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_init_eee);
+
+/**
+ * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @eee: a pointer to a &struct ethtool_eee for the read parameters
+ */
+int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
+{
+ int ret = -EOPNOTSUPP;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev)
+ ret = phy_ethtool_get_eee(pl->phydev, eee);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
+
+/**
+ * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @eee: a pointer to a &struct ethtool_eee for the desired parameters
+ */
+int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
+{
+ int ret = -EOPNOTSUPP;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev)
+ ret = phy_ethtool_set_eee(pl->phydev, eee);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee);
+
+/* This emulates MII registers for a fixed-mode phy operating as per the
+ * passed in state. "aneg" defines if we report negotiation is possible.
+ *
+ * FIXME: should deal with negotiation state too.
+ */
+static int phylink_mii_emul_read(unsigned int reg,
+ struct phylink_link_state *state)
+{
+ struct fixed_phy_status fs;
+ int val;
+
+ fs.link = state->link;
+ fs.speed = state->speed;
+ fs.duplex = state->duplex;
+ fs.pause = state->pause & MLO_PAUSE_SYM;
+ fs.asym_pause = state->pause & MLO_PAUSE_ASYM;
+
+ val = swphy_read_reg(reg, &fs);
+ if (reg == MII_BMSR) {
+ if (!state->an_complete)
+ val &= ~BMSR_ANEGCOMPLETE;
+ }
+ return val;
+}
+
+static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
+ unsigned int reg)
+{
+ struct phy_device *phydev = pl->phydev;
+ int prtad, devad;
+
+ if (mdio_phy_id_is_c45(phy_id)) {
+ prtad = mdio_phy_id_prtad(phy_id);
+ devad = mdio_phy_id_devad(phy_id);
+ devad = MII_ADDR_C45 | devad << 16 | reg;
+ } else if (phydev->is_c45) {
+ switch (reg) {
+ case MII_BMCR:
+ case MII_BMSR:
+ case MII_PHYSID1:
+ case MII_PHYSID2:
+ devad = __ffs(phydev->c45_ids.devices_in_package);
+ break;
+ case MII_ADVERTISE:
+ case MII_LPA:
+ if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN))
+ return -EINVAL;
+ devad = MDIO_MMD_AN;
+ if (reg == MII_ADVERTISE)
+ reg = MDIO_AN_ADVERTISE;
+ else
+ reg = MDIO_AN_LPA;
+ break;
+ default:
+ return -EINVAL;
+ }
+ prtad = phy_id;
+ devad = MII_ADDR_C45 | devad << 16 | reg;
+ } else {
+ prtad = phy_id;
+ devad = reg;
+ }
+ return mdiobus_read(pl->phydev->mdio.bus, prtad, devad);
+}
+
+static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
+ unsigned int reg, unsigned int val)
+{
+ struct phy_device *phydev = pl->phydev;
+ int prtad, devad;
+
+ if (mdio_phy_id_is_c45(phy_id)) {
+ prtad = mdio_phy_id_prtad(phy_id);
+ devad = mdio_phy_id_devad(phy_id);
+ devad = MII_ADDR_C45 | devad << 16 | reg;
+ } else if (phydev->is_c45) {
+ switch (reg) {
+ case MII_BMCR:
+ case MII_BMSR:
+ case MII_PHYSID1:
+ case MII_PHYSID2:
+ devad = __ffs(phydev->c45_ids.devices_in_package);
+ break;
+ case MII_ADVERTISE:
+ case MII_LPA:
+ if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN))
+ return -EINVAL;
+ devad = MDIO_MMD_AN;
+ if (reg == MII_ADVERTISE)
+ reg = MDIO_AN_ADVERTISE;
+ else
+ reg = MDIO_AN_LPA;
+ break;
+ default:
+ return -EINVAL;
+ }
+ prtad = phy_id;
+ devad = MII_ADDR_C45 | devad << 16 | reg;
+ } else {
+ prtad = phy_id;
+ devad = reg;
+ }
+
+ return mdiobus_write(phydev->mdio.bus, prtad, devad, val);
+}
+
+static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
+ unsigned int reg)
+{
+ struct phylink_link_state state;
+ int val = 0xffff;
+
+ switch (pl->cur_link_an_mode) {
+ case MLO_AN_FIXED:
+ if (phy_id == 0) {
+ phylink_get_fixed_state(pl, &state);
+ val = phylink_mii_emul_read(reg, &state);
+ }
+ break;
+
+ case MLO_AN_PHY:
+ return -EOPNOTSUPP;
+
+ case MLO_AN_INBAND:
+ if (phy_id == 0) {
+ val = phylink_get_mac_state(pl, &state);
+ if (val < 0)
+ return val;
+
+ val = phylink_mii_emul_read(reg, &state);
+ }
+ break;
+ }
+
+ return val & 0xffff;
+}
+
+static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
+ unsigned int reg, unsigned int val)
+{
+ switch (pl->cur_link_an_mode) {
+ case MLO_AN_FIXED:
+ break;
+
+ case MLO_AN_PHY:
+ return -EOPNOTSUPP;
+
+ case MLO_AN_INBAND:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * phylink_mii_ioctl() - generic mii ioctl interface
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @ifr: a pointer to a &struct ifreq for socket ioctls
+ * @cmd: ioctl cmd to execute
+ *
+ * Perform the specified MII ioctl on the PHY attached to the phylink instance
+ * specified by @pl. If no PHY is attached, emulate the presence of the PHY.
+ *
+ * Returns: zero on success or negative error code.
+ *
+ * %SIOCGMIIPHY:
+ * read register from the current PHY.
+ * %SIOCGMIIREG:
+ * read register from the specified PHY.
+ * %SIOCSMIIREG:
+ * set a register on the specified PHY.
+ */
+int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *mii = if_mii(ifr);
+ int ret;
+
+ ASSERT_RTNL();
+
+ if (pl->phydev) {
+ /* PHYs only exist for MLO_AN_PHY and SGMII */
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ mii->phy_id = pl->phydev->mdio.addr;
+ /* fall through */
+
+ case SIOCGMIIREG:
+ ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num);
+ if (ret >= 0) {
+ mii->val_out = ret;
+ ret = 0;
+ }
+ break;
+
+ case SIOCSMIIREG:
+ ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num,
+ mii->val_in);
+ break;
+
+ default:
+ ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
+ break;
+ }
+ } else {
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ mii->phy_id = 0;
+ /* fall through */
+
+ case SIOCGMIIREG:
+ ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num);
+ if (ret >= 0) {
+ mii->val_out = ret;
+ ret = 0;
+ }
+ break;
+
+ case SIOCSMIIREG:
+ ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num,
+ mii->val_in);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+
+static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
+{
+ struct phylink *pl = upstream;
+
+ pl->netdev->sfp_bus = bus;
+}
+
+static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
+{
+ struct phylink *pl = upstream;
+
+ pl->netdev->sfp_bus = NULL;
+}
+
+static int phylink_sfp_config(struct phylink *pl, u8 mode,
+ const unsigned long *supported,
+ const unsigned long *advertising)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+ struct phylink_link_state config;
+ phy_interface_t iface;
+ bool changed;
+ int ret;
+
+ linkmode_copy(support, supported);
+
+ memset(&config, 0, sizeof(config));
+ linkmode_copy(config.advertising, advertising);
+ config.interface = PHY_INTERFACE_MODE_NA;
+ config.speed = SPEED_UNKNOWN;
+ config.duplex = DUPLEX_UNKNOWN;
+ config.pause = MLO_PAUSE_AN;
+ config.an_enabled = pl->link_config.an_enabled;
+
+ /* Ignore errors if we're expecting a PHY to attach later */
+ ret = phylink_validate(pl, support, &config);
+ if (ret) {
+ phylink_err(pl, "validation with support %*pb failed: %d\n",
+ __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
+ return ret;
+ }
+
+ iface = sfp_select_interface(pl->sfp_bus, config.advertising);
+ if (iface == PHY_INTERFACE_MODE_NA) {
+ phylink_err(pl,
+ "selection of interface failed, advertisement %*pb\n",
+ __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
+ return -EINVAL;
+ }
+
+ config.interface = iface;
+ linkmode_copy(support1, support);
+ ret = phylink_validate(pl, support1, &config);
+ if (ret) {
+ phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
+ phylink_an_mode_str(mode),
+ phy_modes(config.interface),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
+ return ret;
+ }
+
+ phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
+ phylink_an_mode_str(mode), phy_modes(config.interface),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+
+ if (phy_interface_mode_is_8023z(iface) && pl->phydev)
+ return -EINVAL;
+
+ changed = !bitmap_equal(pl->supported, support,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ if (changed) {
+ linkmode_copy(pl->supported, support);
+ linkmode_copy(pl->link_config.advertising, config.advertising);
+ }
+
+ if (pl->cur_link_an_mode != mode ||
+ pl->link_config.interface != config.interface) {
+ pl->link_config.interface = config.interface;
+ pl->cur_link_an_mode = mode;
+
+ changed = true;
+
+ phylink_info(pl, "switched to %s/%s link mode\n",
+ phylink_an_mode_str(mode),
+ phy_modes(config.interface));
+ }
+
+ pl->link_port = pl->sfp_port;
+
+ if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
+ &pl->phylink_disable_state))
+ phylink_mac_config(pl, &pl->link_config);
+
+ return ret;
+}
+
+static int phylink_sfp_module_insert(void *upstream,
+ const struct sfp_eeprom_id *id)
+{
+ struct phylink *pl = upstream;
+ unsigned long *support = pl->sfp_support;
+
+ ASSERT_RTNL();
+
+ linkmode_zero(support);
+ sfp_parse_support(pl->sfp_bus, id, support);
+ pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
+
+ /* If this module may have a PHY connecting later, defer until later */
+ pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
+ if (pl->sfp_may_have_phy)
+ return 0;
+
+ return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
+}
+
+static int phylink_sfp_module_start(void *upstream)
+{
+ struct phylink *pl = upstream;
+
+ /* If this SFP module has a PHY, start the PHY now. */
+ if (pl->phydev) {
+ phy_start(pl->phydev);
+ return 0;
+ }
+
+ /* If the module may have a PHY but we didn't detect one we
+ * need to configure the MAC here.
+ */
+ if (!pl->sfp_may_have_phy)
+ return 0;
+
+ return phylink_sfp_config(pl, MLO_AN_INBAND,
+ pl->sfp_support, pl->sfp_support);
+}
+
+static void phylink_sfp_module_stop(void *upstream)
+{
+ struct phylink *pl = upstream;
+
+ /* If this SFP module has a PHY, stop it. */
+ if (pl->phydev)
+ phy_stop(pl->phydev);
+}
+
+static void phylink_sfp_link_down(void *upstream)
+{
+ struct phylink *pl = upstream;
+
+ ASSERT_RTNL();
+
+ phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK);
+}
+
+static void phylink_sfp_link_up(void *upstream)
+{
+ struct phylink *pl = upstream;
+
+ ASSERT_RTNL();
+
+ clear_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
+ phylink_run_resolve(pl);
+}
+
+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
+ * or 802.3z control word, so inband will not work.
+ */
+static bool phylink_phy_no_inband(struct phy_device *phy)
+{
+ return phy->is_c45 &&
+ (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
+}
+
+static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
+{
+ struct phylink *pl = upstream;
+ phy_interface_t interface;
+ u8 mode;
+ int ret;
+
+ /*
+ * This is the new way of dealing with flow control for PHYs,
+ * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
+ * phy drivers should not set SUPPORTED_[Asym_]Pause") except
+ * using our validate call to the MAC, we rely upon the MAC
+ * clearing the bits from both supported and advertising fields.
+ */
+ phy_support_asym_pause(phy);
+
+ if (phylink_phy_no_inband(phy))
+ mode = MLO_AN_PHY;
+ else
+ mode = MLO_AN_INBAND;
+
+ /* Do the initial configuration */
+ ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
+ if (ret < 0)
+ return ret;
+
+ interface = pl->link_config.interface;
+ ret = phylink_attach_phy(pl, phy, interface);
+ if (ret < 0)
+ return ret;
+
+ /* Clause 45 PHYs switch their Serdes lane between several different
+ * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
+ * speeds. We really need to know which interface modes the PHY and
+ * MAC supports to properly work out which linkmodes can be supported.
+ */
+ if (phy->is_c45)
+ interface = PHY_INTERFACE_MODE_NA;
+
+ ret = phylink_bringup_phy(pl, phy, interface);
+ if (ret)
+ phy_detach(phy);
+
+ return ret;
+}
+
+static void phylink_sfp_disconnect_phy(void *upstream)
+{
+ phylink_disconnect_phy(upstream);
+}
+
+static const struct sfp_upstream_ops sfp_phylink_ops = {
+ .attach = phylink_sfp_attach,
+ .detach = phylink_sfp_detach,
+ .module_insert = phylink_sfp_module_insert,
+ .module_start = phylink_sfp_module_start,
+ .module_stop = phylink_sfp_module_stop,
+ .link_up = phylink_sfp_link_up,
+ .link_down = phylink_sfp_link_down,
+ .connect_phy = phylink_sfp_connect_phy,
+ .disconnect_phy = phylink_sfp_disconnect_phy,
+};
+
+/* Helpers for MAC drivers */
+
+/**
+ * phylink_helper_basex_speed() - 1000BaseX/2500BaseX helper
+ * @state: a pointer to a &struct phylink_link_state
+ *
+ * Inspect the interface mode, advertising mask or forced speed and
+ * decide whether to run at 2.5Gbit or 1Gbit appropriately, switching
+ * the interface mode to suit. @state->interface is appropriately
+ * updated, and the advertising mask has the "other" baseX_Full flag
+ * cleared.
+ */
+void phylink_helper_basex_speed(struct phylink_link_state *state)
+{
+ if (phy_interface_mode_is_8023z(state->interface)) {
+ bool want_2500 = state->an_enabled ?
+ phylink_test(state->advertising, 2500baseX_Full) :
+ state->speed == SPEED_2500;
+
+ if (want_2500) {
+ phylink_clear(state->advertising, 1000baseX_Full);
+ state->interface = PHY_INTERFACE_MODE_2500BASEX;
+ } else {
+ phylink_clear(state->advertising, 2500baseX_Full);
+ state->interface = PHY_INTERFACE_MODE_1000BASEX;
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(phylink_helper_basex_speed);
+
+MODULE_LICENSE("GPL v2");