ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/net/phy/uPD60620.c b/marvell/linux/drivers/net/phy/uPD60620.c
new file mode 100644
index 0000000..a32b3fd
--- /dev/null
+++ b/marvell/linux/drivers/net/phy/uPD60620.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the Renesas PHY uPD60620.
+ *
+ * Copyright (C) 2015 Softing Industrial Automation GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define UPD60620_PHY_ID 0xb8242824
+
+/* Extended Registers and values */
+/* PHY Special Control/Status */
+#define PHY_PHYSCR 0x1F /* PHY.31 */
+#define PHY_PHYSCR_10MB 0x0004 /* PHY speed = 10mb */
+#define PHY_PHYSCR_100MB 0x0008 /* PHY speed = 100mb */
+#define PHY_PHYSCR_DUPLEX 0x0010 /* PHY Duplex */
+
+/* PHY Special Modes */
+#define PHY_SPM 0x12 /* PHY.18 */
+
+/* Init PHY */
+
+static int upd60620_config_init(struct phy_device *phydev)
+{
+ /* Enable support for passive HUBs (could be a strap option) */
+ /* PHYMODE: All speeds, HD in parallel detect */
+ return phy_write(phydev, PHY_SPM, 0x0180 | phydev->mdio.addr);
+}
+
+/* Get PHY status from common registers */
+
+static int upd60620_read_status(struct phy_device *phydev)
+{
+ int phy_state;
+
+ /* Read negotiated state */
+ phy_state = phy_read(phydev, MII_BMSR);
+ if (phy_state < 0)
+ return phy_state;
+
+ phydev->link = 0;
+ linkmode_zero(phydev->lp_advertising);
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (phy_state & (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
+ phy_state = phy_read(phydev, PHY_PHYSCR);
+ if (phy_state < 0)
+ return phy_state;
+
+ if (phy_state & (PHY_PHYSCR_10MB | PHY_PHYSCR_100MB)) {
+ phydev->link = 1;
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+
+ if (phy_state & PHY_PHYSCR_100MB)
+ phydev->speed = SPEED_100;
+ if (phy_state & PHY_PHYSCR_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+
+ phy_state = phy_read(phydev, MII_LPA);
+ if (phy_state < 0)
+ return phy_state;
+
+ mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising,
+ phy_state);
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ if (phy_state & LPA_PAUSE_CAP)
+ phydev->pause = 1;
+ if (phy_state & LPA_PAUSE_ASYM)
+ phydev->asym_pause = 1;
+ }
+ }
+ }
+ return 0;
+}
+
+MODULE_DESCRIPTION("Renesas uPD60620 PHY driver");
+MODULE_AUTHOR("Bernd Edlinger <bernd.edlinger@hotmail.de>");
+MODULE_LICENSE("GPL");
+
+static struct phy_driver upd60620_driver[1] = { {
+ .phy_id = UPD60620_PHY_ID,
+ .phy_id_mask = 0xfffffffe,
+ .name = "Renesas uPD60620",
+ /* PHY_BASIC_FEATURES */
+ .flags = 0,
+ .config_init = upd60620_config_init,
+ .read_status = upd60620_read_status,
+} };
+
+module_phy_driver(upd60620_driver);
+
+static struct mdio_device_id __maybe_unused upd60620_tbl[] = {
+ { UPD60620_PHY_ID, 0xfffffffe },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, upd60620_tbl);