diff --git a/marvell/linux/drivers/net/usb/zaurus.c b/marvell/linux/drivers/net/usb/zaurus.c
new file mode 100644
index 0000000..df3617c
--- /dev/null
+++ b/marvell/linux/drivers/net/usb/zaurus.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2002-2005 by David Brownell
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * All known Zaurii lie about their standards conformance.  At least
+ * the earliest SA-1100 models lie by saying they support CDC Ethernet.
+ * Some later models (especially PXA-25x and PXA-27x based ones) lie
+ * and say they support CDC MDLM (for access to cell phone modems).
+ *
+ * There are non-Zaurus products that use these same protocols too.
+ *
+ * The annoying thing is that at the same time Sharp was developing
+ * that annoying standards-breaking software, the Linux community had
+ * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
+ * That is, the same functionality but not violating standards.
+ *
+ * The CDC Ethernet nonconformance points are troublesome to hosts
+ * with a true CDC Ethernet implementation:
+ *   - Framing appends a CRC, which the spec says drivers "must not" do;
+ *   - Transfers data in altsetting zero, instead of altsetting 1;
+ *   - All these peripherals use the same ethernet address.
+ *
+ * The CDC MDLM nonconformance is less immediately troublesome, since all
+ * MDLM implementations are quasi-proprietary anyway.
+ */
+
+static struct sk_buff *
+zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	int			padlen;
+	struct sk_buff		*skb2;
+
+	padlen = 2;
+	if (!skb_cloned(skb)) {
+		int	tailroom = skb_tailroom(skb);
+		if ((padlen + 4) <= tailroom)
+			goto done;
+	}
+	skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+	if (skb) {
+		u32		fcs;
+done:
+		fcs = crc32_le(~0, skb->data, skb->len);
+		fcs = ~fcs;
+
+		skb_put_u8(skb, fcs & 0xff);
+		skb_put_u8(skb, (fcs >> 8) & 0xff);
+		skb_put_u8(skb, (fcs >> 16) & 0xff);
+		skb_put_u8(skb, (fcs >> 24) & 0xff);
+	}
+	return skb;
+}
+
+static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	/* Belcarra's funky framing has other options; mostly
+	 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
+	 */
+	dev->net->hard_header_len += 6;
+	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+	return usbnet_generic_cdc_bind(dev, intf);
+}
+
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+	return 0;
+}
+
+static const struct driver_info	zaurus_sl5x00_info = {
+	.description =	"Sharp Zaurus SL-5x00",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	ZAURUS_STRONGARM_INFO	((unsigned long)&zaurus_sl5x00_info)
+
+static const struct driver_info	zaurus_pxa_info = {
+	.description =	"Sharp Zaurus, PXA-2xx based",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	ZAURUS_PXA_INFO		((unsigned long)&zaurus_pxa_info)
+
+static const struct driver_info	olympus_mxl_info = {
+	.description =	"Olympus R1000",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	OLYMPUS_MXL_INFO	((unsigned long)&olympus_mxl_info)
+
+
+/* Some more recent products using Lineo/Belcarra code will wrongly claim
+ * CDC MDLM conformance.  They aren't conformant:  data endpoints live
+ * in the control interface, there's no data interface, and it's not used
+ * to talk to a cell phone radio.  But at least we can detect these two
+ * pseudo-classes, rather than growing this product list with entries for
+ * each new nonconformant product (sigh).
+ */
+static const u8 safe_guid[16] = {
+	0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+	0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+};
+static const u8 blan_guid[16] = {
+	0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
+	0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
+};
+
+static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8				*buf = intf->cur_altsetting->extra;
+	int				len = intf->cur_altsetting->extralen;
+	struct usb_cdc_mdlm_desc	*desc = NULL;
+	struct usb_cdc_mdlm_detail_desc	*detail = NULL;
+
+	while (len > 3) {
+		if (buf [1] != USB_DT_CS_INTERFACE)
+			goto next_desc;
+
+		/* use bDescriptorSubType, and just verify that we get a
+		 * "BLAN" (or "SAFE") descriptor.
+		 */
+		switch (buf [2]) {
+		case USB_CDC_MDLM_TYPE:
+			if (desc) {
+				dev_dbg(&intf->dev, "extra MDLM\n");
+				goto bad_desc;
+			}
+			desc = (void *) buf;
+			if (desc->bLength != sizeof *desc) {
+				dev_dbg(&intf->dev, "MDLM len %u\n",
+					desc->bLength);
+				goto bad_desc;
+			}
+			/* expect bcdVersion 1.0, ignore */
+			if (memcmp(&desc->bGUID, blan_guid, 16) &&
+			    memcmp(&desc->bGUID, safe_guid, 16)) {
+				/* hey, this one might _really_ be MDLM! */
+				dev_dbg(&intf->dev, "MDLM guid\n");
+				goto bad_desc;
+			}
+			break;
+		case USB_CDC_MDLM_DETAIL_TYPE:
+			if (detail) {
+				dev_dbg(&intf->dev, "extra MDLM detail\n");
+				goto bad_desc;
+			}
+			detail = (void *) buf;
+			switch (detail->bGuidDescriptorType) {
+			case 0:			/* "SAFE" */
+				if (detail->bLength != (sizeof *detail + 2))
+					goto bad_detail;
+				break;
+			case 1:			/* "BLAN" */
+				if (detail->bLength != (sizeof *detail + 3))
+					goto bad_detail;
+				break;
+			default:
+				goto bad_detail;
+			}
+
+			/* assuming we either noticed BLAN already, or will
+			 * find it soon, there are some data bytes here:
+			 *  - bmNetworkCapabilities (unused)
+			 *  - bmDataCapabilities (bits, see below)
+			 *  - bPad (ignored, for PADAFTER -- BLAN-only)
+			 * bits are:
+			 *  - 0x01 -- Zaurus framing (add CRC)
+			 *  - 0x02 -- PADBEFORE (CRC includes some padding)
+			 *  - 0x04 -- PADAFTER (some padding after CRC)
+			 *  - 0x08 -- "fermat" packet mangling (for hw bugs)
+			 * the PADBEFORE appears not to matter; we interop
+			 * with devices that use it and those that don't.
+			 */
+			if ((detail->bDetailData[1] & ~0x02) != 0x01) {
+				/* bmDataCapabilities == 0 would be fine too,
+				 * but framing is minidriver-coupled for now.
+				 */
+bad_detail:
+				dev_dbg(&intf->dev,
+						"bad MDLM detail, %d %d %d\n",
+						detail->bLength,
+						detail->bDetailData[0],
+						detail->bDetailData[2]);
+				goto bad_desc;
+			}
+
+			/* same extra framing as for non-BLAN mode */
+			dev->net->hard_header_len += 6;
+			dev->rx_urb_size = dev->net->hard_header_len
+					+ dev->net->mtu;
+			break;
+		}
+next_desc:
+		len -= buf [0];	/* bLength */
+		buf += buf [0];
+	}
+
+	if (!desc || !detail) {
+		dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
+			desc ? "" : "func ",
+			detail ? "" : "detail ");
+		goto bad_desc;
+	}
+
+	/* There's probably a CDC Ethernet descriptor there, but we can't
+	 * rely on the Ethernet address it provides since not all vendors
+	 * bother to make it unique.  Likewise there's no point in tracking
+	 * of the CDC event notifications.
+	 */
+	return usbnet_get_endpoints(dev, intf);
+
+bad_desc:
+	dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
+	return -ENODEV;
+}
+
+static const struct driver_info	bogus_mdlm_info = {
+	.description =	"pseudo-MDLM (BLAN) device",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.tx_fixup =	zaurus_tx_fixup,
+	.bind =		blan_mdlm_bind,
+};
+
+static const struct usb_device_id	products [] = {
+#define	ZAURUS_MASTER_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+#define ZAURUS_FAKE_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_MDLM, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8004,
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_STRONGARM_INFO,
+},
+
+/* PXA-2xx based models are also lying-about-cdc.  If you add any
+ * more devices that claim to be CDC Ethernet, make sure they get
+ * added to the blacklist in cdc_ether too.
+ *
+ * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
+ * unlike the older ones with 2.4 "embedix" kernels.
+ */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,	/* A-300 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,	/* A-300 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,	/* B-500/SL-5600 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,	/* B-500/SL-5600 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+	          | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,	/* C-700 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,	/* C-700 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9031,	/* C-750 C-760 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	/* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
+	USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9032,	/* SL-6000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			    | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x9032,	/* SL-6000 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	/* reported with some C860 units */
+	.idProduct              = 0x9050,	/* C-860 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+},
+{
+	/* Motorola Rokr E6 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	/* Motorola MOTOMAGX phones */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x07B4,
+	.idProduct              = 0x0F02,	/* R-1000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = OLYMPUS_MXL_INFO,
+},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver zaurus_driver = {
+	.name =		"zaurus",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(zaurus_driver);
+
+MODULE_AUTHOR("Pavel Machek, David Brownell");
+MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
+MODULE_LICENSE("GPL");