ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/pci/controller/dwc/Kconfig b/marvell/linux/drivers/pci/controller/dwc/Kconfig
new file mode 100644
index 0000000..ab4025e
--- /dev/null
+++ b/marvell/linux/drivers/pci/controller/dwc/Kconfig
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "DesignWare PCI Core Support"
+ depends on PCI
+
+config PCIE_DW
+ bool
+
+config PCIE_DW_HOST
+ bool
+ select PCIE_DW
+
+config PCIE_DW_EP
+ bool
+ depends on PCI_ENDPOINT
+ select PCIE_DW
+
+config PCI_DRA7XX
+ bool
+
+config PCI_DRA7XX_HOST
+ bool "TI DRA7xx PCIe controller Host Mode"
+ depends on SOC_DRA7XX || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ depends on OF && HAS_IOMEM && TI_PIPE3
+ select PCIE_DW_HOST
+ select PCI_DRA7XX
+ default y
+ help
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ host mode. There are two instances of PCIe controller in DRA7xx.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCI_DRA7XX_HOST must be selected and in order
+ to enable device-specific features PCI_DRA7XX_EP must be selected.
+ This uses the DesignWare core.
+
+config PCI_DRA7XX_EP
+ bool "TI DRA7xx PCIe controller Endpoint Mode"
+ depends on SOC_DRA7XX || COMPILE_TEST
+ depends on PCI_ENDPOINT
+ depends on OF && HAS_IOMEM && TI_PIPE3
+ select PCIE_DW_EP
+ select PCI_DRA7XX
+ help
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ endpoint mode. There are two instances of PCIe controller in DRA7xx.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCI_DRA7XX_HOST must be selected and in order
+ to enable device-specific features PCI_DRA7XX_EP must be selected.
+ This uses the DesignWare core.
+
+config PCIE_DW_PLAT
+ bool
+
+config PCIE_DW_PLAT_HOST
+ bool "Platform bus based DesignWare PCIe Controller - Host mode"
+ depends on PCI && PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ select PCIE_DW_PLAT
+ help
+ Enables support for the PCIe controller in the Designware IP to
+ work in host mode. There are two instances of PCIe controller in
+ Designware IP.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCIE_DW_PLAT_HOST must be selected and in
+ order to enable device-specific features PCI_DW_PLAT_EP must be
+ selected.
+
+config PCIE_DW_PLAT_EP
+ bool "Platform bus based DesignWare PCIe Controller - Endpoint mode"
+ depends on PCI && PCI_MSI_IRQ_DOMAIN
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ select PCIE_DW_PLAT
+ help
+ Enables support for the PCIe controller in the Designware IP to
+ work in endpoint mode. There are two instances of PCIe controller
+ in Designware IP.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCIE_DW_PLAT_HOST must be selected and in
+ order to enable device-specific features PCI_DW_PLAT_EP must be
+ selected.
+
+config PCI_EXYNOS
+ bool "Samsung Exynos PCIe controller"
+ depends on SOC_EXYNOS5440 || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+
+config PCI_IMX6
+ bool "Freescale i.MX6/7/8 PCIe controller"
+ depends on ARCH_MXC || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+
+config PCIE_SPEAR13XX
+ bool "STMicroelectronics SPEAr PCIe controller"
+ depends on ARCH_SPEAR13XX || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want PCIe support on SPEAr13XX SoCs.
+
+config PCI_KEYSTONE
+ bool
+
+config PCI_KEYSTONE_HOST
+ bool "PCI Keystone Host Mode"
+ depends on ARCH_KEYSTONE || ARCH_K3 || ((ARM || ARM64) && COMPILE_TEST)
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ select PCI_KEYSTONE
+ default y
+ help
+ Enables support for the PCIe controller in the Keystone SoC to
+ work in host mode. The PCI controller on Keystone is based on
+ DesignWare hardware and therefore the driver re-uses the
+ DesignWare core functions to implement the driver.
+
+config PCI_KEYSTONE_EP
+ bool "PCI Keystone Endpoint Mode"
+ depends on ARCH_KEYSTONE || ARCH_K3 || ((ARM || ARM64) && COMPILE_TEST)
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ select PCI_KEYSTONE
+ help
+ Enables support for the PCIe controller in the Keystone SoC to
+ work in endpoint mode. The PCI controller on Keystone is based
+ on DesignWare hardware and therefore the driver re-uses the
+ DesignWare core functions to implement the driver.
+
+config PCI_LAYERSCAPE
+ bool "Freescale Layerscape PCIe controller - Host mode"
+ depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
+ depends on PCI_MSI_IRQ_DOMAIN
+ select MFD_SYSCON
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want to enable PCIe controller support on Layerscape
+ SoCs to work in Host mode.
+ This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
+ determines which PCIe controller works in EP mode and which PCIe
+ controller works in RC mode.
+
+config PCI_LAYERSCAPE_EP
+ bool "Freescale Layerscape PCIe controller - Endpoint mode"
+ depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ help
+ Say Y here if you want to enable PCIe controller support on Layerscape
+ SoCs to work in Endpoint mode.
+ This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
+ determines which PCIe controller works in EP mode and which PCIe
+ controller works in RC mode.
+
+config PCI_HISI
+ depends on OF && (ARM64 || COMPILE_TEST)
+ bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want PCIe controller support on HiSilicon
+ Hip05 and Hip06 SoCs
+
+config PCIE_QCOM
+ bool "Qualcomm PCIe controller"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here to enable PCIe controller support on Qualcomm SoCs. The
+ PCIe controller uses the DesignWare core plus Qualcomm-specific
+ hardware wrappers.
+
+config PCIE_ARMADA_8K
+ bool "Marvell Armada-8K PCIe controller"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want to enable PCIe controller support on
+ Armada-8K SoCs. The PCIe controller on Armada-8K is based on
+ DesignWare hardware and therefore the driver re-uses the
+ DesignWare core functions to implement the driver.
+
+config PCIE_ARTPEC6
+ bool
+
+config PCIE_ARTPEC6_HOST
+ bool "Axis ARTPEC-6 PCIe controller Host Mode"
+ depends on MACH_ARTPEC6 || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ select PCIE_ARTPEC6
+ help
+ Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
+ host mode. This uses the DesignWare core.
+
+config PCIE_ARTPEC6_EP
+ bool "Axis ARTPEC-6 PCIe controller Endpoint Mode"
+ depends on MACH_ARTPEC6 || COMPILE_TEST
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ select PCIE_ARTPEC6
+ help
+ Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
+ endpoint mode. This uses the DesignWare core.
+
+config PCIE_KIRIN
+ depends on OF && (ARM64 || COMPILE_TEST)
+ bool "HiSilicon Kirin series SoCs PCIe controllers"
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want PCIe controller support
+ on HiSilicon Kirin series SoCs.
+
+config PCIE_HISI_STB
+ bool "HiSilicon STB SoCs PCIe controllers"
+ depends on ARCH_HISI || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want PCIe controller support on HiSilicon STB SoCs
+
+config PCI_MESON
+ bool "MESON PCIe controller"
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want to enable PCI controller support on Amlogic
+ SoCs. The PCI controller on Amlogic is based on DesignWare hardware
+ and therefore the driver re-uses the DesignWare core functions to
+ implement the driver.
+
+config PCIE_TEGRA194
+ tristate "NVIDIA Tegra194 (and later) PCIe controller"
+ depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ select PHY_TEGRA194_P2U
+ help
+ Say Y here if you want support for DesignWare core based PCIe host
+ controller found in NVIDIA Tegra194 SoC.
+
+config PCIE_UNIPHIER
+ bool "Socionext UniPhier PCIe controllers"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want PCIe controller support on UniPhier SoCs.
+ This driver supports LD20 and PXs3 SoCs.
+
+config PCIE_AL
+ bool "Amazon Annapurna Labs PCIe controller"
+ depends on OF && (ARM64 || COMPILE_TEST)
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW_HOST
+ help
+ Say Y here to enable support of the Amazon's Annapurna Labs PCIe
+ controller IP on Amazon SoCs. The PCIe controller uses the DesignWare
+ core plus Annapurna Labs proprietary hardware wrappers. This is
+ required only for DT-based platforms. ACPI platforms with the
+ Annapurna Labs PCIe controller don't need to enable this.
+
+config PCIE_ASR1901
+ bool "ASR1901 PCIe controller"
+ depends on CPU_ASR1901 || COMPILE_TEST
+ select PCIE_DW_HOST
+ help
+ Say Y here if you want to enable PCIe controller support on
+ ASR1901 SoCs. The PCIe controller on ASR1901 is based on
+ DesignWare hardware and therefore the driver re-uses the
+ DesignWare core functions to implement the driver.
+
+endmenu