diff --git a/marvell/linux/drivers/pwm/pwm-lpss.c b/marvell/linux/drivers/pwm/pwm-lpss.c
new file mode 100644
index 0000000..d77cec2
--- /dev/null
+++ b/marvell/linux/drivers/pwm/pwm-lpss.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Author: Chew Kean Ho <kean.ho.chew@intel.com>
+ * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
+ * Author: Chew Chiau Ee <chiau.ee.chew@intel.com>
+ * Author: Alan Cox <alan@linux.intel.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/time.h>
+
+#include "pwm-lpss.h"
+
+#define PWM				0x00000000
+#define PWM_ENABLE			BIT(31)
+#define PWM_SW_UPDATE			BIT(30)
+#define PWM_BASE_UNIT_SHIFT		8
+#define PWM_ON_TIME_DIV_MASK		0x000000ff
+
+/* Size of each PWM register space if multiple */
+#define PWM_SIZE			0x400
+
+static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pwm_lpss_chip, chip);
+}
+
+static inline u32 pwm_lpss_read(const struct pwm_device *pwm)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
+
+	return readl(lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM);
+}
+
+static inline void pwm_lpss_write(const struct pwm_device *pwm, u32 value)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
+
+	writel(value, lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM);
+}
+
+static int pwm_lpss_wait_for_update(struct pwm_device *pwm)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
+	const void __iomem *addr = lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM;
+	const unsigned int ms = 500 * USEC_PER_MSEC;
+	u32 val;
+	int err;
+
+	/*
+	 * PWM Configuration register has SW_UPDATE bit that is set when a new
+	 * configuration is written to the register. The bit is automatically
+	 * cleared at the start of the next output cycle by the IP block.
+	 *
+	 * If one writes a new configuration to the register while it still has
+	 * the bit enabled, PWM may freeze. That is, while one can still write
+	 * to the register, it won't have an effect. Thus, we try to sleep long
+	 * enough that the bit gets cleared and make sure the bit is not
+	 * enabled while we update the configuration.
+	 */
+	err = readl_poll_timeout(addr, val, !(val & PWM_SW_UPDATE), 40, ms);
+	if (err)
+		dev_err(pwm->chip->dev, "PWM_SW_UPDATE was not cleared\n");
+
+	return err;
+}
+
+static inline int pwm_lpss_is_updating(struct pwm_device *pwm)
+{
+	return (pwm_lpss_read(pwm) & PWM_SW_UPDATE) ? -EBUSY : 0;
+}
+
+static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
+			     int duty_ns, int period_ns)
+{
+	unsigned long long on_time_div;
+	unsigned long c = lpwm->info->clk_rate, base_unit_range;
+	unsigned long long base_unit, freq = NSEC_PER_SEC;
+	u32 orig_ctrl, ctrl;
+
+	do_div(freq, period_ns);
+
+	/*
+	 * The equation is:
+	 * base_unit = round(base_unit_range * freq / c)
+	 */
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
+	freq *= base_unit_range;
+
+	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);
+	/* base_unit must not be 0 and we also want to avoid overflowing it */
+	base_unit = clamp_val(base_unit, 1, base_unit_range - 1);
+
+	on_time_div = 255ULL * duty_ns;
+	do_div(on_time_div, period_ns);
+	on_time_div = 255ULL - on_time_div;
+
+	orig_ctrl = ctrl = pwm_lpss_read(pwm);
+	ctrl &= ~PWM_ON_TIME_DIV_MASK;
+	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
+	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
+	ctrl |= on_time_div;
+
+	if (orig_ctrl != ctrl) {
+		pwm_lpss_write(pwm, ctrl);
+		pwm_lpss_write(pwm, ctrl | PWM_SW_UPDATE);
+	}
+}
+
+static inline void pwm_lpss_cond_enable(struct pwm_device *pwm, bool cond)
+{
+	if (cond)
+		pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_ENABLE);
+}
+
+static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	int ret;
+
+	if (state->enabled) {
+		if (!pwm_is_enabled(pwm)) {
+			pm_runtime_get_sync(chip->dev);
+			ret = pwm_lpss_is_updating(pwm);
+			if (ret) {
+				pm_runtime_put(chip->dev);
+				return ret;
+			}
+			pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
+			pwm_lpss_cond_enable(pwm, lpwm->info->bypass == false);
+			ret = pwm_lpss_wait_for_update(pwm);
+			if (ret) {
+				pm_runtime_put(chip->dev);
+				return ret;
+			}
+			pwm_lpss_cond_enable(pwm, lpwm->info->bypass == true);
+		} else {
+			ret = pwm_lpss_is_updating(pwm);
+			if (ret)
+				return ret;
+			pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period);
+			return pwm_lpss_wait_for_update(pwm);
+		}
+	} else if (pwm_is_enabled(pwm)) {
+		pwm_lpss_write(pwm, pwm_lpss_read(pwm) & ~PWM_ENABLE);
+		pm_runtime_put(chip->dev);
+	}
+
+	return 0;
+}
+
+/* This function gets called once from pwmchip_add to get the initial state */
+static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	unsigned long base_unit_range;
+	unsigned long long base_unit, freq, on_time_div;
+	u32 ctrl;
+
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
+
+	ctrl = pwm_lpss_read(pwm);
+	on_time_div = 255 - (ctrl & PWM_ON_TIME_DIV_MASK);
+	base_unit = (ctrl >> PWM_BASE_UNIT_SHIFT) & (base_unit_range - 1);
+
+	freq = base_unit * lpwm->info->clk_rate;
+	do_div(freq, base_unit_range);
+	if (freq == 0)
+		state->period = NSEC_PER_SEC;
+	else
+		state->period = NSEC_PER_SEC / (unsigned long)freq;
+
+	on_time_div *= state->period;
+	do_div(on_time_div, 255);
+	state->duty_cycle = on_time_div;
+
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->enabled = !!(ctrl & PWM_ENABLE);
+
+	if (state->enabled)
+		pm_runtime_get(chip->dev);
+}
+
+static const struct pwm_ops pwm_lpss_ops = {
+	.apply = pwm_lpss_apply,
+	.get_state = pwm_lpss_get_state,
+	.owner = THIS_MODULE,
+};
+
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
+				     const struct pwm_lpss_boardinfo *info)
+{
+	struct pwm_lpss_chip *lpwm;
+	unsigned long c;
+	int ret;
+
+	if (WARN_ON(info->npwm > MAX_PWMS))
+		return ERR_PTR(-ENODEV);
+
+	lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL);
+	if (!lpwm)
+		return ERR_PTR(-ENOMEM);
+
+	lpwm->regs = devm_ioremap_resource(dev, r);
+	if (IS_ERR(lpwm->regs))
+		return ERR_CAST(lpwm->regs);
+
+	lpwm->info = info;
+
+	c = lpwm->info->clk_rate;
+	if (!c)
+		return ERR_PTR(-EINVAL);
+
+	lpwm->chip.dev = dev;
+	lpwm->chip.ops = &pwm_lpss_ops;
+	lpwm->chip.base = -1;
+	lpwm->chip.npwm = info->npwm;
+
+	ret = pwmchip_add(&lpwm->chip);
+	if (ret) {
+		dev_err(dev, "failed to add PWM chip: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return lpwm;
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_probe);
+
+int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
+{
+	int i;
+
+	for (i = 0; i < lpwm->info->npwm; i++) {
+		if (pwm_is_enabled(&lpwm->chip.pwms[i]))
+			pm_runtime_put(lpwm->chip.dev);
+	}
+	return pwmchip_remove(&lpwm->chip);
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_remove);
+
+int pwm_lpss_suspend(struct device *dev)
+{
+	struct pwm_lpss_chip *lpwm = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < lpwm->info->npwm; i++)
+		lpwm->saved_ctrl[i] = readl(lpwm->regs + i * PWM_SIZE + PWM);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_suspend);
+
+int pwm_lpss_resume(struct device *dev)
+{
+	struct pwm_lpss_chip *lpwm = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < lpwm->info->npwm; i++)
+		writel(lpwm->saved_ctrl[i], lpwm->regs + i * PWM_SIZE + PWM);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pwm_lpss_resume);
+
+MODULE_DESCRIPTION("PWM driver for Intel LPSS");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");