ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/rtc/rtc-rk808.c b/marvell/linux/drivers/rtc/rtc-rk808.c
new file mode 100644
index 0000000..c0334c6
--- /dev/null
+++ b/marvell/linux/drivers/rtc/rtc-rk808.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTC driver for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/mfd/rk808.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+/* RTC_CTRL_REG bitfields */
+#define BIT_RTC_CTRL_REG_STOP_RTC_M BIT(0)
+
+/* RK808 has a shadowed register for saving a "frozen" RTC time.
+ * When user setting "GET_TIME" to 1, the time will save in this shadowed
+ * register. If set "READSEL" to 1, user read rtc time register, actually
+ * get the time of that moment. If we need the real time, clr this bit.
+ */
+#define BIT_RTC_CTRL_REG_RTC_GET_TIME BIT(6)
+#define BIT_RTC_CTRL_REG_RTC_READSEL_M BIT(7)
+#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M BIT(3)
+#define RTC_STATUS_MASK 0xFE
+
+#define SECONDS_REG_MSK 0x7F
+#define MINUTES_REG_MAK 0x7F
+#define HOURS_REG_MSK 0x3F
+#define DAYS_REG_MSK 0x3F
+#define MONTHS_REG_MSK 0x1F
+#define YEARS_REG_MSK 0xFF
+#define WEEKS_REG_MSK 0x7
+
+/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
+
+#define NUM_TIME_REGS (RK808_WEEKS_REG - RK808_SECONDS_REG + 1)
+#define NUM_ALARM_REGS (RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
+
+struct rk_rtc_compat_reg {
+ unsigned int ctrl_reg;
+ unsigned int status_reg;
+ unsigned int alarm_seconds_reg;
+ unsigned int int_reg;
+ unsigned int seconds_reg;
+};
+
+struct rk808_rtc {
+ struct rk808 *rk808;
+ struct rtc_device *rtc;
+ struct rk_rtc_compat_reg *creg;
+ int irq;
+};
+
+/*
+ * The Rockchip calendar used by the RK808 counts November with 31 days. We use
+ * these translation functions to convert its dates to/from the Gregorian
+ * calendar used by the rest of the world. We arbitrarily define Jan 1st, 2016
+ * as the day when both calendars were in sync, and treat all other dates
+ * relative to that.
+ * NOTE: Other system software (e.g. firmware) that reads the same hardware must
+ * implement this exact same conversion algorithm, with the same anchor date.
+ */
+static time64_t nov2dec_transitions(struct rtc_time *tm)
+{
+ return (tm->tm_year + 1900) - 2016 + (tm->tm_mon + 1 > 11 ? 1 : 0);
+}
+
+static void rockchip_to_gregorian(struct rtc_time *tm)
+{
+ /* If it's Nov 31st, rtc_tm_to_time64() will count that like Dec 1st */
+ time64_t time = rtc_tm_to_time64(tm);
+ rtc_time64_to_tm(time + nov2dec_transitions(tm) * 86400, tm);
+}
+
+static void gregorian_to_rockchip(struct rtc_time *tm)
+{
+ time64_t extra_days = nov2dec_transitions(tm);
+ time64_t time = rtc_tm_to_time64(tm);
+ rtc_time64_to_tm(time - extra_days * 86400, tm);
+
+ /* Compensate if we went back over Nov 31st (will work up to 2381) */
+ if (nov2dec_transitions(tm) < extra_days) {
+ if (tm->tm_mon + 1 == 11)
+ tm->tm_mday++; /* This may result in 31! */
+ else
+ rtc_time64_to_tm(time - (extra_days - 1) * 86400, tm);
+ }
+}
+
+/* Read current time and date in RTC */
+static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ u8 rtc_data[NUM_TIME_REGS];
+ int ret;
+
+ /* Force an update of the shadowed registers right now */
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+ BIT_RTC_CTRL_REG_RTC_GET_TIME,
+ BIT_RTC_CTRL_REG_RTC_GET_TIME);
+ if (ret) {
+ dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * After we set the GET_TIME bit, the rtc time can't be read
+ * immediately. So we should wait up to 31.25 us, about one cycle of
+ * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
+ * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
+ */
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+ BIT_RTC_CTRL_REG_RTC_GET_TIME,
+ 0);
+ if (ret) {
+ dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_bulk_read(rk808->regmap, rk808_rtc->creg->seconds_reg,
+ rtc_data, NUM_TIME_REGS);
+ if (ret) {
+ dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
+ return ret;
+ }
+
+ tm->tm_sec = bcd2bin(rtc_data[0] & SECONDS_REG_MSK);
+ tm->tm_min = bcd2bin(rtc_data[1] & MINUTES_REG_MAK);
+ tm->tm_hour = bcd2bin(rtc_data[2] & HOURS_REG_MSK);
+ tm->tm_mday = bcd2bin(rtc_data[3] & DAYS_REG_MSK);
+ tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1;
+ tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100;
+ tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK);
+ rockchip_to_gregorian(tm);
+ dev_dbg(dev, "RTC date/time %ptRd(%d) %ptRt\n", tm, tm->tm_wday, tm);
+
+ return ret;
+}
+
+/* Set current time and date in RTC */
+static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ u8 rtc_data[NUM_TIME_REGS];
+ int ret;
+
+ dev_dbg(dev, "set RTC date/time %ptRd(%d) %ptRt\n", tm, tm->tm_wday, tm);
+ gregorian_to_rockchip(tm);
+ rtc_data[0] = bin2bcd(tm->tm_sec);
+ rtc_data[1] = bin2bcd(tm->tm_min);
+ rtc_data[2] = bin2bcd(tm->tm_hour);
+ rtc_data[3] = bin2bcd(tm->tm_mday);
+ rtc_data[4] = bin2bcd(tm->tm_mon + 1);
+ rtc_data[5] = bin2bcd(tm->tm_year - 100);
+ rtc_data[6] = bin2bcd(tm->tm_wday);
+
+ /* Stop RTC while updating the RTC registers */
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+ BIT_RTC_CTRL_REG_STOP_RTC_M,
+ BIT_RTC_CTRL_REG_STOP_RTC_M);
+ if (ret) {
+ dev_err(dev, "Failed to update RTC control: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_bulk_write(rk808->regmap, rk808_rtc->creg->seconds_reg,
+ rtc_data, NUM_TIME_REGS);
+ if (ret) {
+ dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
+ return ret;
+ }
+ /* Start RTC again */
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+ BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
+ if (ret) {
+ dev_err(dev, "Failed to update RTC control: %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+/* Read alarm time and date in RTC */
+static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ u8 alrm_data[NUM_ALARM_REGS];
+ uint32_t int_reg;
+ int ret;
+
+ ret = regmap_bulk_read(rk808->regmap,
+ rk808_rtc->creg->alarm_seconds_reg,
+ alrm_data, NUM_ALARM_REGS);
+ if (ret) {
+ dev_err(dev, "Failed to read RTC alarm date REG: %d\n", ret);
+ return ret;
+ }
+
+ alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
+ alrm->time.tm_min = bcd2bin(alrm_data[1] & MINUTES_REG_MAK);
+ alrm->time.tm_hour = bcd2bin(alrm_data[2] & HOURS_REG_MSK);
+ alrm->time.tm_mday = bcd2bin(alrm_data[3] & DAYS_REG_MSK);
+ alrm->time.tm_mon = (bcd2bin(alrm_data[4] & MONTHS_REG_MSK)) - 1;
+ alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
+ rockchip_to_gregorian(&alrm->time);
+
+ ret = regmap_read(rk808->regmap, rk808_rtc->creg->int_reg, &int_reg);
+ if (ret) {
+ dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "alrm read RTC date/time %ptRd(%d) %ptRt\n",
+ &alrm->time, alrm->time.tm_wday, &alrm->time);
+
+ alrm->enabled = (int_reg & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) ? 1 : 0;
+
+ return 0;
+}
+
+static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
+{
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ int ret;
+
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
+ BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
+
+ return ret;
+}
+
+static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
+{
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ int ret;
+
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
+ BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
+ BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+
+ return ret;
+}
+
+static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ u8 alrm_data[NUM_ALARM_REGS];
+ int ret;
+
+ ret = rk808_rtc_stop_alarm(rk808_rtc);
+ if (ret) {
+ dev_err(dev, "Failed to stop alarm: %d\n", ret);
+ return ret;
+ }
+ dev_dbg(dev, "alrm set RTC date/time %ptRd(%d) %ptRt\n",
+ &alrm->time, alrm->time.tm_wday, &alrm->time);
+
+ gregorian_to_rockchip(&alrm->time);
+ alrm_data[0] = bin2bcd(alrm->time.tm_sec);
+ alrm_data[1] = bin2bcd(alrm->time.tm_min);
+ alrm_data[2] = bin2bcd(alrm->time.tm_hour);
+ alrm_data[3] = bin2bcd(alrm->time.tm_mday);
+ alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
+ alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
+
+ ret = regmap_bulk_write(rk808->regmap,
+ rk808_rtc->creg->alarm_seconds_reg,
+ alrm_data, NUM_ALARM_REGS);
+ if (ret) {
+ dev_err(dev, "Failed to bulk write: %d\n", ret);
+ return ret;
+ }
+ if (alrm->enabled) {
+ ret = rk808_rtc_start_alarm(rk808_rtc);
+ if (ret) {
+ dev_err(dev, "Failed to start alarm: %d\n", ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int rk808_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+
+ if (enabled)
+ return rk808_rtc_start_alarm(rk808_rtc);
+
+ return rk808_rtc_stop_alarm(rk808_rtc);
+}
+
+/*
+ * We will just handle setting the frequency and make use the framework for
+ * reading the periodic interupts.
+ *
+ * @freq: Current periodic IRQ freq:
+ * bit 0: every second
+ * bit 1: every minute
+ * bit 2: every hour
+ * bit 3: every day
+ */
+static irqreturn_t rk808_alarm_irq(int irq, void *data)
+{
+ struct rk808_rtc *rk808_rtc = data;
+ struct rk808 *rk808 = rk808_rtc->rk808;
+ struct i2c_client *client = rk808->i2c;
+ int ret;
+
+ ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
+ RTC_STATUS_MASK);
+ if (ret) {
+ dev_err(&client->dev,
+ "%s:Failed to update RTC status: %d\n", __func__, ret);
+ return ret;
+ }
+
+ rtc_update_irq(rk808_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+ dev_dbg(&client->dev,
+ "%s:irq=%d\n", __func__, irq);
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops rk808_rtc_ops = {
+ .read_time = rk808_rtc_readtime,
+ .set_time = rk808_rtc_set_time,
+ .read_alarm = rk808_rtc_readalarm,
+ .set_alarm = rk808_rtc_setalarm,
+ .alarm_irq_enable = rk808_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_PM_SLEEP
+/* Turn off the alarm if it should not be a wake source. */
+static int rk808_rtc_suspend(struct device *dev)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(rk808_rtc->irq);
+
+ return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int rk808_rtc_resume(struct device *dev)
+{
+ struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(rk808_rtc->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
+ rk808_rtc_suspend, rk808_rtc_resume);
+
+static struct rk_rtc_compat_reg rk808_creg = {
+ .ctrl_reg = RK808_RTC_CTRL_REG,
+ .status_reg = RK808_RTC_STATUS_REG,
+ .alarm_seconds_reg = RK808_ALARM_SECONDS_REG,
+ .int_reg = RK808_RTC_INT_REG,
+ .seconds_reg = RK808_SECONDS_REG,
+};
+
+static struct rk_rtc_compat_reg rk817_creg = {
+ .ctrl_reg = RK817_RTC_CTRL_REG,
+ .status_reg = RK817_RTC_STATUS_REG,
+ .alarm_seconds_reg = RK817_ALARM_SECONDS_REG,
+ .int_reg = RK817_RTC_INT_REG,
+ .seconds_reg = RK817_SECONDS_REG,
+};
+
+static int rk808_rtc_probe(struct platform_device *pdev)
+{
+ struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+ struct rk808_rtc *rk808_rtc;
+ int ret;
+
+ rk808_rtc = devm_kzalloc(&pdev->dev, sizeof(*rk808_rtc), GFP_KERNEL);
+ if (rk808_rtc == NULL)
+ return -ENOMEM;
+
+ switch (rk808->variant) {
+ case RK809_ID:
+ case RK817_ID:
+ rk808_rtc->creg = &rk817_creg;
+ break;
+ default:
+ rk808_rtc->creg = &rk808_creg;
+ break;
+ }
+ platform_set_drvdata(pdev, rk808_rtc);
+ rk808_rtc->rk808 = rk808;
+
+ /* start rtc running by default, and use shadowed timer. */
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+ BIT_RTC_CTRL_REG_STOP_RTC_M |
+ BIT_RTC_CTRL_REG_RTC_READSEL_M,
+ BIT_RTC_CTRL_REG_RTC_READSEL_M);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to update RTC control: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
+ RTC_STATUS_MASK);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to write RTC status: %d\n", ret);
+ return ret;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ rk808_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rk808_rtc->rtc))
+ return PTR_ERR(rk808_rtc->rtc);
+
+ rk808_rtc->rtc->ops = &rk808_rtc_ops;
+
+ rk808_rtc->irq = platform_get_irq(pdev, 0);
+ if (rk808_rtc->irq < 0)
+ return rk808_rtc->irq;
+
+ /* request alarm irq of rk808 */
+ ret = devm_request_threaded_irq(&pdev->dev, rk808_rtc->irq, NULL,
+ rk808_alarm_irq, 0,
+ "RTC alarm", rk808_rtc);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+ rk808_rtc->irq, ret);
+ return ret;
+ }
+
+ return rtc_register_device(rk808_rtc->rtc);
+}
+
+static struct platform_driver rk808_rtc_driver = {
+ .probe = rk808_rtc_probe,
+ .driver = {
+ .name = "rk808-rtc",
+ .pm = &rk808_rtc_pm_ops,
+ },
+};
+
+module_platform_driver(rk808_rtc_driver);
+
+MODULE_DESCRIPTION("RTC driver for the rk808 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk808-rtc");