ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/scsi/scsi_transport_spi.c b/marvell/linux/drivers/scsi/scsi_transport_spi.c
new file mode 100644
index 0000000..83f2576
--- /dev/null
+++ b/marvell/linux/drivers/scsi/scsi_transport_spi.c
@@ -0,0 +1,1640 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Parallel SCSI (SPI) transport specific attributes exported to sysfs.
+ *
+ * Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2004, 2005 James Bottomley <James.Bottomley@SteelEye.com>
+ */
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <scsi/scsi.h>
+#include "scsi_priv.h"
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
+
+#define SPI_NUM_ATTRS 14 /* increase this if you add attributes */
+#define SPI_OTHER_ATTRS 1 /* Increase this if you add "always
+ * on" attributes */
+#define SPI_HOST_ATTRS 1
+
+#define SPI_MAX_ECHO_BUFFER_SIZE 4096
+
+#define DV_LOOPS 3
+#define DV_TIMEOUT (10*HZ)
+#define DV_RETRIES 3 /* should only need at most
+ * two cc/ua clears */
+
+/* Our blacklist flags */
+enum {
+ SPI_BLIST_NOIUS = (__force blist_flags_t)0x1,
+};
+
+/* blacklist table, modelled on scsi_devinfo.c */
+static struct {
+ char *vendor;
+ char *model;
+ blist_flags_t flags;
+} spi_static_device_list[] __initdata = {
+ {"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS },
+ {"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS },
+ {NULL, NULL, 0}
+};
+
+/* Private data accessors (keep these out of the header file) */
+#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
+#define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
+
+struct spi_internal {
+ struct scsi_transport_template t;
+ struct spi_function_template *f;
+};
+
+#define to_spi_internal(tmpl) container_of(tmpl, struct spi_internal, t)
+
+static const int ppr_to_ps[] = {
+ /* The PPR values 0-6 are reserved, fill them in when
+ * the committee defines them */
+ -1, /* 0x00 */
+ -1, /* 0x01 */
+ -1, /* 0x02 */
+ -1, /* 0x03 */
+ -1, /* 0x04 */
+ -1, /* 0x05 */
+ -1, /* 0x06 */
+ 3125, /* 0x07 */
+ 6250, /* 0x08 */
+ 12500, /* 0x09 */
+ 25000, /* 0x0a */
+ 30300, /* 0x0b */
+ 50000, /* 0x0c */
+};
+/* The PPR values at which you calculate the period in ns by multiplying
+ * by 4 */
+#define SPI_STATIC_PPR 0x0c
+
+static int sprint_frac(char *dest, int value, int denom)
+{
+ int frac = value % denom;
+ int result = sprintf(dest, "%d", value / denom);
+
+ if (frac == 0)
+ return result;
+ dest[result++] = '.';
+
+ do {
+ denom /= 10;
+ sprintf(dest + result, "%d", frac / denom);
+ result++;
+ frac %= denom;
+ } while (frac);
+
+ dest[result++] = '\0';
+ return result;
+}
+
+static int spi_execute(struct scsi_device *sdev, const void *cmd,
+ enum dma_data_direction dir,
+ void *buffer, unsigned bufflen,
+ struct scsi_sense_hdr *sshdr)
+{
+ int i, result;
+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+ struct scsi_sense_hdr sshdr_tmp;
+
+ if (!sshdr)
+ sshdr = &sshdr_tmp;
+
+ for(i = 0; i < DV_RETRIES; i++) {
+ /*
+ * The purpose of the RQF_PM flag below is to bypass the
+ * SDEV_QUIESCE state.
+ */
+ result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense,
+ sshdr, DV_TIMEOUT, /* retries */ 1,
+ REQ_FAILFAST_DEV |
+ REQ_FAILFAST_TRANSPORT |
+ REQ_FAILFAST_DRIVER,
+ RQF_PM, NULL);
+ if (driver_byte(result) != DRIVER_SENSE ||
+ sshdr->sense_key != UNIT_ATTENTION)
+ break;
+ }
+ return result;
+}
+
+static struct {
+ enum spi_signal_type value;
+ char *name;
+} signal_types[] = {
+ { SPI_SIGNAL_UNKNOWN, "unknown" },
+ { SPI_SIGNAL_SE, "SE" },
+ { SPI_SIGNAL_LVD, "LVD" },
+ { SPI_SIGNAL_HVD, "HVD" },
+};
+
+static inline const char *spi_signal_to_string(enum spi_signal_type type)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
+ if (type == signal_types[i].value)
+ return signal_types[i].name;
+ }
+ return NULL;
+}
+static inline enum spi_signal_type spi_signal_to_value(const char *name)
+{
+ int i, len;
+
+ for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
+ len = strlen(signal_types[i].name);
+ if (strncmp(name, signal_types[i].name, len) == 0 &&
+ (name[len] == '\n' || name[len] == '\0'))
+ return signal_types[i].value;
+ }
+ return SPI_SIGNAL_UNKNOWN;
+}
+
+static int spi_host_setup(struct transport_container *tc, struct device *dev,
+ struct device *cdev)
+{
+ struct Scsi_Host *shost = dev_to_shost(dev);
+
+ spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
+
+ return 0;
+}
+
+static int spi_host_configure(struct transport_container *tc,
+ struct device *dev,
+ struct device *cdev);
+
+static DECLARE_TRANSPORT_CLASS(spi_host_class,
+ "spi_host",
+ spi_host_setup,
+ NULL,
+ spi_host_configure);
+
+static int spi_host_match(struct attribute_container *cont,
+ struct device *dev)
+{
+ struct Scsi_Host *shost;
+
+ if (!scsi_is_host_device(dev))
+ return 0;
+
+ shost = dev_to_shost(dev);
+ if (!shost->transportt || shost->transportt->host_attrs.ac.class
+ != &spi_host_class.class)
+ return 0;
+
+ return &shost->transportt->host_attrs.ac == cont;
+}
+
+static int spi_target_configure(struct transport_container *tc,
+ struct device *dev,
+ struct device *cdev);
+
+static int spi_device_configure(struct transport_container *tc,
+ struct device *dev,
+ struct device *cdev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_target *starget = sdev->sdev_target;
+ blist_flags_t bflags;
+
+ bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8],
+ &sdev->inquiry[16],
+ SCSI_DEVINFO_SPI);
+
+ /* Populate the target capability fields with the values
+ * gleaned from the device inquiry */
+
+ spi_support_sync(starget) = scsi_device_sync(sdev);
+ spi_support_wide(starget) = scsi_device_wide(sdev);
+ spi_support_dt(starget) = scsi_device_dt(sdev);
+ spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
+ spi_support_ius(starget) = scsi_device_ius(sdev);
+ if (bflags & SPI_BLIST_NOIUS) {
+ dev_info(dev, "Information Units disabled by blacklist\n");
+ spi_support_ius(starget) = 0;
+ }
+ spi_support_qas(starget) = scsi_device_qas(sdev);
+
+ return 0;
+}
+
+static int spi_setup_transport_attrs(struct transport_container *tc,
+ struct device *dev,
+ struct device *cdev)
+{
+ struct scsi_target *starget = to_scsi_target(dev);
+
+ spi_period(starget) = -1; /* illegal value */
+ spi_min_period(starget) = 0;
+ spi_offset(starget) = 0; /* async */
+ spi_max_offset(starget) = 255;
+ spi_width(starget) = 0; /* narrow */
+ spi_max_width(starget) = 1;
+ spi_iu(starget) = 0; /* no IU */
+ spi_max_iu(starget) = 1;
+ spi_dt(starget) = 0; /* ST */
+ spi_qas(starget) = 0;
+ spi_max_qas(starget) = 1;
+ spi_wr_flow(starget) = 0;
+ spi_rd_strm(starget) = 0;
+ spi_rti(starget) = 0;
+ spi_pcomp_en(starget) = 0;
+ spi_hold_mcs(starget) = 0;
+ spi_dv_pending(starget) = 0;
+ spi_dv_in_progress(starget) = 0;
+ spi_initial_dv(starget) = 0;
+ mutex_init(&spi_dv_mutex(starget));
+
+ return 0;
+}
+
+#define spi_transport_show_simple(field, format_string) \
+ \
+static ssize_t \
+show_spi_transport_##field(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct scsi_target *starget = transport_class_to_starget(dev); \
+ struct spi_transport_attrs *tp; \
+ \
+ tp = (struct spi_transport_attrs *)&starget->starget_data; \
+ return snprintf(buf, 20, format_string, tp->field); \
+}
+
+#define spi_transport_store_simple(field, format_string) \
+ \
+static ssize_t \
+store_spi_transport_##field(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ int val; \
+ struct scsi_target *starget = transport_class_to_starget(dev); \
+ struct spi_transport_attrs *tp; \
+ \
+ tp = (struct spi_transport_attrs *)&starget->starget_data; \
+ val = simple_strtoul(buf, NULL, 0); \
+ tp->field = val; \
+ return count; \
+}
+
+#define spi_transport_show_function(field, format_string) \
+ \
+static ssize_t \
+show_spi_transport_##field(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct scsi_target *starget = transport_class_to_starget(dev); \
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \
+ struct spi_transport_attrs *tp; \
+ struct spi_internal *i = to_spi_internal(shost->transportt); \
+ tp = (struct spi_transport_attrs *)&starget->starget_data; \
+ if (i->f->get_##field) \
+ i->f->get_##field(starget); \
+ return snprintf(buf, 20, format_string, tp->field); \
+}
+
+#define spi_transport_store_function(field, format_string) \
+static ssize_t \
+store_spi_transport_##field(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ int val; \
+ struct scsi_target *starget = transport_class_to_starget(dev); \
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \
+ struct spi_internal *i = to_spi_internal(shost->transportt); \
+ \
+ if (!i->f->set_##field) \
+ return -EINVAL; \
+ val = simple_strtoul(buf, NULL, 0); \
+ i->f->set_##field(starget, val); \
+ return count; \
+}
+
+#define spi_transport_store_max(field, format_string) \
+static ssize_t \
+store_spi_transport_##field(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ int val; \
+ struct scsi_target *starget = transport_class_to_starget(dev); \
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \
+ struct spi_internal *i = to_spi_internal(shost->transportt); \
+ struct spi_transport_attrs *tp \
+ = (struct spi_transport_attrs *)&starget->starget_data; \
+ \
+ if (!i->f->set_##field) \
+ return -EINVAL; \
+ val = simple_strtoul(buf, NULL, 0); \
+ if (val > tp->max_##field) \
+ val = tp->max_##field; \
+ i->f->set_##field(starget, val); \
+ return count; \
+}
+
+#define spi_transport_rd_attr(field, format_string) \
+ spi_transport_show_function(field, format_string) \
+ spi_transport_store_function(field, format_string) \
+static DEVICE_ATTR(field, S_IRUGO, \
+ show_spi_transport_##field, \
+ store_spi_transport_##field);
+
+#define spi_transport_simple_attr(field, format_string) \
+ spi_transport_show_simple(field, format_string) \
+ spi_transport_store_simple(field, format_string) \
+static DEVICE_ATTR(field, S_IRUGO, \
+ show_spi_transport_##field, \
+ store_spi_transport_##field);
+
+#define spi_transport_max_attr(field, format_string) \
+ spi_transport_show_function(field, format_string) \
+ spi_transport_store_max(field, format_string) \
+ spi_transport_simple_attr(max_##field, format_string) \
+static DEVICE_ATTR(field, S_IRUGO, \
+ show_spi_transport_##field, \
+ store_spi_transport_##field);
+
+/* The Parallel SCSI Tranport Attributes: */
+spi_transport_max_attr(offset, "%d\n");
+spi_transport_max_attr(width, "%d\n");
+spi_transport_max_attr(iu, "%d\n");
+spi_transport_rd_attr(dt, "%d\n");
+spi_transport_max_attr(qas, "%d\n");
+spi_transport_rd_attr(wr_flow, "%d\n");
+spi_transport_rd_attr(rd_strm, "%d\n");
+spi_transport_rd_attr(rti, "%d\n");
+spi_transport_rd_attr(pcomp_en, "%d\n");
+spi_transport_rd_attr(hold_mcs, "%d\n");
+
+/* we only care about the first child device that's a real SCSI device
+ * so we return 1 to terminate the iteration when we find it */
+static int child_iter(struct device *dev, void *data)
+{
+ if (!scsi_is_sdev_device(dev))
+ return 0;
+
+ spi_dv_device(to_scsi_device(dev));
+ return 1;
+}
+
+static ssize_t
+store_spi_revalidate(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_target *starget = transport_class_to_starget(dev);
+
+ device_for_each_child(&starget->dev, NULL, child_iter);
+ return count;
+}
+static DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate);
+
+/* Translate the period into ns according to the current spec
+ * for SDTR/PPR messages */
+static int period_to_str(char *buf, int period)
+{
+ int len, picosec;
+
+ if (period < 0 || period > 0xff) {
+ picosec = -1;
+ } else if (period <= SPI_STATIC_PPR) {
+ picosec = ppr_to_ps[period];
+ } else {
+ picosec = period * 4000;
+ }
+
+ if (picosec == -1) {
+ len = sprintf(buf, "reserved");
+ } else {
+ len = sprint_frac(buf, picosec, 1000);
+ }
+
+ return len;
+}
+
+static ssize_t
+show_spi_transport_period_helper(char *buf, int period)
+{
+ int len = period_to_str(buf, period);
+ buf[len++] = '\n';
+ buf[len] = '\0';
+ return len;
+}
+
+static ssize_t
+store_spi_transport_period_helper(struct device *dev, const char *buf,
+ size_t count, int *periodp)
+{
+ int j, picosec, period = -1;
+ char *endp;
+
+ picosec = simple_strtoul(buf, &endp, 10) * 1000;
+ if (*endp == '.') {
+ int mult = 100;
+ do {
+ endp++;
+ if (!isdigit(*endp))
+ break;
+ picosec += (*endp - '0') * mult;
+ mult /= 10;
+ } while (mult > 0);
+ }
+
+ for (j = 0; j <= SPI_STATIC_PPR; j++) {
+ if (ppr_to_ps[j] < picosec)
+ continue;
+ period = j;
+ break;
+ }
+
+ if (period == -1)
+ period = picosec / 4000;
+
+ if (period > 0xff)
+ period = 0xff;
+
+ *periodp = period;
+
+ return count;
+}
+
+static ssize_t
+show_spi_transport_period(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_target *starget = transport_class_to_starget(dev);
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+
+ if (i->f->get_period)
+ i->f->get_period(starget);
+
+ return show_spi_transport_period_helper(buf, tp->period);
+}
+
+static ssize_t
+store_spi_transport_period(struct device *cdev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+ int period, retval;
+
+ if (!i->f->set_period)
+ return -EINVAL;
+
+ retval = store_spi_transport_period_helper(cdev, buf, count, &period);
+
+ if (period < tp->min_period)
+ period = tp->min_period;
+
+ i->f->set_period(starget, period);
+
+ return retval;
+}
+
+static DEVICE_ATTR(period, S_IRUGO,
+ show_spi_transport_period,
+ store_spi_transport_period);
+
+static ssize_t
+show_spi_transport_min_period(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+
+ if (!i->f->set_period)
+ return -EINVAL;
+
+ return show_spi_transport_period_helper(buf, tp->min_period);
+}
+
+static ssize_t
+store_spi_transport_min_period(struct device *cdev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct spi_transport_attrs *tp =
+ (struct spi_transport_attrs *)&starget->starget_data;
+
+ return store_spi_transport_period_helper(cdev, buf, count,
+ &tp->min_period);
+}
+
+
+static DEVICE_ATTR(min_period, S_IRUGO,
+ show_spi_transport_min_period,
+ store_spi_transport_min_period);
+
+
+static ssize_t show_spi_host_signalling(struct device *cdev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = transport_class_to_shost(cdev);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+
+ if (i->f->get_signalling)
+ i->f->get_signalling(shost);
+
+ return sprintf(buf, "%s\n", spi_signal_to_string(spi_signalling(shost)));
+}
+static ssize_t store_spi_host_signalling(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = transport_class_to_shost(dev);
+ struct spi_internal *i = to_spi_internal(shost->transportt);
+ enum spi_signal_type type = spi_signal_to_value(buf);
+
+ if (!i->f->set_signalling)
+ return -EINVAL;
+
+ if (type != SPI_SIGNAL_UNKNOWN)
+ i->f->set_signalling(shost, type);
+
+ return count;
+}
+static DEVICE_ATTR(signalling, S_IRUGO,
+ show_spi_host_signalling,
+ store_spi_host_signalling);
+
+static ssize_t show_spi_host_width(struct device *cdev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = transport_class_to_shost(cdev);
+
+ return sprintf(buf, "%s\n", shost->max_id == 16 ? "wide" : "narrow");
+}
+static DEVICE_ATTR(host_width, S_IRUGO,
+ show_spi_host_width, NULL);
+
+static ssize_t show_spi_host_hba_id(struct device *cdev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = transport_class_to_shost(cdev);
+
+ return sprintf(buf, "%d\n", shost->this_id);
+}
+static DEVICE_ATTR(hba_id, S_IRUGO,
+ show_spi_host_hba_id, NULL);
+
+#define DV_SET(x, y) \
+ if(i->f->set_##x) \
+ i->f->set_##x(sdev->sdev_target, y)
+
+enum spi_compare_returns {
+ SPI_COMPARE_SUCCESS,
+ SPI_COMPARE_FAILURE,
+ SPI_COMPARE_SKIP_TEST,
+};
+
+
+/* This is for read/write Domain Validation: If the device supports
+ * an echo buffer, we do read/write tests to it */
+static enum spi_compare_returns
+spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
+ u8 *ptr, const int retries)
+{
+ int len = ptr - buffer;
+ int j, k, r, result;
+ unsigned int pattern = 0x0000ffff;
+ struct scsi_sense_hdr sshdr;
+
+ const char spi_write_buffer[] = {
+ WRITE_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
+ };
+ const char spi_read_buffer[] = {
+ READ_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
+ };
+
+ /* set up the pattern buffer. Doesn't matter if we spill
+ * slightly beyond since that's where the read buffer is */
+ for (j = 0; j < len; ) {
+
+ /* fill the buffer with counting (test a) */
+ for ( ; j < min(len, 32); j++)
+ buffer[j] = j;
+ k = j;
+ /* fill the buffer with alternating words of 0x0 and
+ * 0xffff (test b) */
+ for ( ; j < min(len, k + 32); j += 2) {
+ u16 *word = (u16 *)&buffer[j];
+
+ *word = (j & 0x02) ? 0x0000 : 0xffff;
+ }
+ k = j;
+ /* fill with crosstalk (alternating 0x5555 0xaaa)
+ * (test c) */
+ for ( ; j < min(len, k + 32); j += 2) {
+ u16 *word = (u16 *)&buffer[j];
+
+ *word = (j & 0x02) ? 0x5555 : 0xaaaa;
+ }
+ k = j;
+ /* fill with shifting bits (test d) */
+ for ( ; j < min(len, k + 32); j += 4) {
+ u32 *word = (unsigned int *)&buffer[j];
+ u32 roll = (pattern & 0x80000000) ? 1 : 0;
+
+ *word = pattern;
+ pattern = (pattern << 1) | roll;
+ }
+ /* don't bother with random data (test e) */
+ }
+
+ for (r = 0; r < retries; r++) {
+ result = spi_execute(sdev, spi_write_buffer, DMA_TO_DEVICE,
+ buffer, len, &sshdr);
+ if (result || !scsi_device_online(sdev)) {
+
+ scsi_device_set_state(sdev, SDEV_QUIESCE);
+ if (result > 0 && scsi_sense_valid(&sshdr)
+ && sshdr.sense_key == ILLEGAL_REQUEST
+ /* INVALID FIELD IN CDB */
+ && sshdr.asc == 0x24 && sshdr.ascq == 0x00)
+ /* This would mean that the drive lied
+ * to us about supporting an echo
+ * buffer (unfortunately some Western
+ * Digital drives do precisely this)
+ */
+ return SPI_COMPARE_SKIP_TEST;
+
+
+ sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
+ return SPI_COMPARE_FAILURE;
+ }
+
+ memset(ptr, 0, len);
+ spi_execute(sdev, spi_read_buffer, DMA_FROM_DEVICE,
+ ptr, len, NULL);
+ scsi_device_set_state(sdev, SDEV_QUIESCE);
+
+ if (memcmp(buffer, ptr, len) != 0)
+ return SPI_COMPARE_FAILURE;
+ }
+ return SPI_COMPARE_SUCCESS;
+}
+
+/* This is for the simplest form of Domain Validation: a read test
+ * on the inquiry data from the device */
+static enum spi_compare_returns
+spi_dv_device_compare_inquiry(struct scsi_device *sdev, u8 *buffer,
+ u8 *ptr, const int retries)
+{
+ int r, result;
+ const int len = sdev->inquiry_len;
+ const char spi_inquiry[] = {
+ INQUIRY, 0, 0, 0, len, 0
+ };
+
+ for (r = 0; r < retries; r++) {
+ memset(ptr, 0, len);
+
+ result = spi_execute(sdev, spi_inquiry, DMA_FROM_DEVICE,
+ ptr, len, NULL);
+
+ if(result || !scsi_device_online(sdev)) {
+ scsi_device_set_state(sdev, SDEV_QUIESCE);
+ return SPI_COMPARE_FAILURE;
+ }
+
+ /* If we don't have the inquiry data already, the
+ * first read gets it */
+ if (ptr == buffer) {
+ ptr += len;
+ --r;
+ continue;
+ }
+
+ if (memcmp(buffer, ptr, len) != 0)
+ /* failure */
+ return SPI_COMPARE_FAILURE;
+ }
+ return SPI_COMPARE_SUCCESS;
+}
+
+static enum spi_compare_returns
+spi_dv_retrain(struct scsi_device *sdev, u8 *buffer, u8 *ptr,
+ enum spi_compare_returns
+ (*compare_fn)(struct scsi_device *, u8 *, u8 *, int))
+{
+ struct spi_internal *i = to_spi_internal(sdev->host->transportt);
+ struct scsi_target *starget = sdev->sdev_target;
+ int period = 0, prevperiod = 0;
+ enum spi_compare_returns retval;
+
+
+ for (;;) {
+ int newperiod;
+ retval = compare_fn(sdev, buffer, ptr, DV_LOOPS);
+
+ if (retval == SPI_COMPARE_SUCCESS
+ || retval == SPI_COMPARE_SKIP_TEST)
+ break;
+
+ /* OK, retrain, fallback */
+ if (i->f->get_iu)
+ i->f->get_iu(starget);
+ if (i->f->get_qas)
+ i->f->get_qas(starget);
+ if (i->f->get_period)
+ i->f->get_period(sdev->sdev_target);
+
+ /* Here's the fallback sequence; first try turning off
+ * IU, then QAS (if we can control them), then finally
+ * fall down the periods */
+ if (i->f->set_iu && spi_iu(starget)) {
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabling Information Units\n");
+ DV_SET(iu, 0);
+ } else if (i->f->set_qas && spi_qas(starget)) {
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabling Quick Arbitration and Selection\n");
+ DV_SET(qas, 0);
+ } else {
+ newperiod = spi_period(starget);
+ period = newperiod > period ? newperiod : period;
+ if (period < 0x0d)
+ period++;
+ else
+ period += period >> 1;
+
+ if (unlikely(period > 0xff || period == prevperiod)) {
+ /* Total failure; set to async and return */
+ starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
+ DV_SET(offset, 0);
+ return SPI_COMPARE_FAILURE;
+ }
+ starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
+ DV_SET(period, period);
+ prevperiod = period;
+ }
+ }
+ return retval;
+}
+
+static int
+spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
+{
+ int l, result;
+
+ /* first off do a test unit ready. This can error out
+ * because of reservations or some other reason. If it
+ * fails, the device won't let us write to the echo buffer
+ * so just return failure */
+
+ static const char spi_test_unit_ready[] = {
+ TEST_UNIT_READY, 0, 0, 0, 0, 0
+ };
+
+ static const char spi_read_buffer_descriptor[] = {
+ READ_BUFFER, 0x0b, 0, 0, 0, 0, 0, 0, 4, 0
+ };
+
+
+ /* We send a set of three TURs to clear any outstanding
+ * unit attention conditions if they exist (Otherwise the
+ * buffer tests won't be happy). If the TUR still fails
+ * (reservation conflict, device not ready, etc) just
+ * skip the write tests */
+ for (l = 0; ; l++) {
+ result = spi_execute(sdev, spi_test_unit_ready, DMA_NONE,
+ NULL, 0, NULL);
+
+ if(result) {
+ if(l >= 3)
+ return 0;
+ } else {
+ /* TUR succeeded */
+ break;
+ }
+ }
+
+ result = spi_execute(sdev, spi_read_buffer_descriptor,
+ DMA_FROM_DEVICE, buffer, 4, NULL);
+
+ if (result)
+ /* Device has no echo buffer */
+ return 0;
+
+ return buffer[3] + ((buffer[2] & 0x1f) << 8);
+}
+
+static void
+spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
+{
+ struct spi_internal *i = to_spi_internal(sdev->host->transportt);
+ struct scsi_target *starget = sdev->sdev_target;
+ struct Scsi_Host *shost = sdev->host;
+ int len = sdev->inquiry_len;
+ int min_period = spi_min_period(starget);
+ int max_width = spi_max_width(starget);
+ /* first set us up for narrow async */
+ DV_SET(offset, 0);
+ DV_SET(width, 0);
+
+ if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
+ != SPI_COMPARE_SUCCESS) {
+ starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
+ /* FIXME: should probably offline the device here? */
+ return;
+ }
+
+ if (!spi_support_wide(starget)) {
+ spi_max_width(starget) = 0;
+ max_width = 0;
+ }
+
+ /* test width */
+ if (i->f->set_width && max_width) {
+ i->f->set_width(starget, 1);
+
+ if (spi_dv_device_compare_inquiry(sdev, buffer,
+ buffer + len,
+ DV_LOOPS)
+ != SPI_COMPARE_SUCCESS) {
+ starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
+ i->f->set_width(starget, 0);
+ /* Make sure we don't force wide back on by asking
+ * for a transfer period that requires it */
+ max_width = 0;
+ if (min_period < 10)
+ min_period = 10;
+ }
+ }
+
+ if (!i->f->set_period)
+ return;
+
+ /* device can't handle synchronous */
+ if (!spi_support_sync(starget) && !spi_support_dt(starget))
+ return;
+
+ /* len == -1 is the signal that we need to ascertain the
+ * presence of an echo buffer before trying to use it. len ==
+ * 0 means we don't have an echo buffer */
+ len = -1;
+
+ retry:
+
+ /* now set up to the maximum */
+ DV_SET(offset, spi_max_offset(starget));
+ DV_SET(period, min_period);
+
+ /* try QAS requests; this should be harmless to set if the
+ * target supports it */
+ if (spi_support_qas(starget) && spi_max_qas(starget)) {
+ DV_SET(qas, 1);
+ } else {
+ DV_SET(qas, 0);
+ }
+
+ if (spi_support_ius(starget) && spi_max_iu(starget) &&
+ min_period < 9) {
+ /* This u320 (or u640). Set IU transfers */
+ DV_SET(iu, 1);
+ /* Then set the optional parameters */
+ DV_SET(rd_strm, 1);
+ DV_SET(wr_flow, 1);
+ DV_SET(rti, 1);
+ if (min_period == 8)
+ DV_SET(pcomp_en, 1);
+ } else {
+ DV_SET(iu, 0);
+ }
+
+ /* now that we've done all this, actually check the bus
+ * signal type (if known). Some devices are stupid on
+ * a SE bus and still claim they can try LVD only settings */
+ if (i->f->get_signalling)
+ i->f->get_signalling(shost);
+ if (spi_signalling(shost) == SPI_SIGNAL_SE ||
+ spi_signalling(shost) == SPI_SIGNAL_HVD ||
+ !spi_support_dt(starget)) {
+ DV_SET(dt, 0);
+ } else {
+ DV_SET(dt, 1);
+ }
+ /* set width last because it will pull all the other
+ * parameters down to required values */
+ DV_SET(width, max_width);
+
+ /* Do the read only INQUIRY tests */
+ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
+ spi_dv_device_compare_inquiry);
+ /* See if we actually managed to negotiate and sustain DT */
+ if (i->f->get_dt)
+ i->f->get_dt(starget);
+
+ /* see if the device has an echo buffer. If it does we can do
+ * the SPI pattern write tests. Because of some broken
+ * devices, we *only* try this on a device that has actually
+ * negotiated DT */
+
+ if (len == -1 && spi_dt(starget))
+ len = spi_dv_device_get_echo_buffer(sdev, buffer);
+
+ if (len <= 0) {
+ starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
+ return;
+ }
+
+ if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
+ starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
+ len = SPI_MAX_ECHO_BUFFER_SIZE;
+ }
+
+ if (spi_dv_retrain(sdev, buffer, buffer + len,
+ spi_dv_device_echo_buffer)
+ == SPI_COMPARE_SKIP_TEST) {
+ /* OK, the stupid drive can't do a write echo buffer
+ * test after all, fall back to the read tests */
+ len = 0;
+ goto retry;
+ }
+}
+
+
+/** spi_dv_device - Do Domain Validation on the device
+ * @sdev: scsi device to validate
+ *
+ * Performs the domain validation on the given device in the
+ * current execution thread. Since DV operations may sleep,
+ * the current thread must have user context. Also no SCSI
+ * related locks that would deadlock I/O issued by the DV may
+ * be held.
+ */
+void
+spi_dv_device(struct scsi_device *sdev)
+{
+ struct scsi_target *starget = sdev->sdev_target;
+ u8 *buffer;
+ const int len = SPI_MAX_ECHO_BUFFER_SIZE*2;
+
+ /*
+ * Because this function and the power management code both call
+ * scsi_device_quiesce(), it is not safe to perform domain validation
+ * while suspend or resume is in progress. Hence the
+ * lock/unlock_system_sleep() calls.
+ */
+ lock_system_sleep();
+
+ if (scsi_autopm_get_device(sdev))
+ goto unlock_system_sleep;
+
+ if (unlikely(spi_dv_in_progress(starget)))
+ goto put_autopm;
+
+ if (unlikely(scsi_device_get(sdev)))
+ goto put_autopm;
+
+ spi_dv_in_progress(starget) = 1;
+
+ buffer = kzalloc(len, GFP_KERNEL);
+
+ if (unlikely(!buffer))
+ goto put_sdev;
+
+ /* We need to verify that the actual device will quiesce; the
+ * later target quiesce is just a nice to have */
+ if (unlikely(scsi_device_quiesce(sdev)))
+ goto free_buffer;
+
+ scsi_target_quiesce(starget);
+
+ spi_dv_pending(starget) = 1;
+ mutex_lock(&spi_dv_mutex(starget));
+
+ starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
+
+ spi_dv_device_internal(sdev, buffer);
+
+ starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
+
+ mutex_unlock(&spi_dv_mutex(starget));
+ spi_dv_pending(starget) = 0;
+
+ scsi_target_resume(starget);
+
+ spi_initial_dv(starget) = 1;
+
+free_buffer:
+ kfree(buffer);
+
+put_sdev:
+ spi_dv_in_progress(starget) = 0;
+ scsi_device_put(sdev);
+put_autopm:
+ scsi_autopm_put_device(sdev);
+
+unlock_system_sleep:
+ unlock_system_sleep();
+}
+EXPORT_SYMBOL(spi_dv_device);
+
+struct work_queue_wrapper {
+ struct work_struct work;
+ struct scsi_device *sdev;
+};
+
+static void
+spi_dv_device_work_wrapper(struct work_struct *work)
+{
+ struct work_queue_wrapper *wqw =
+ container_of(work, struct work_queue_wrapper, work);
+ struct scsi_device *sdev = wqw->sdev;
+
+ kfree(wqw);
+ spi_dv_device(sdev);
+ spi_dv_pending(sdev->sdev_target) = 0;
+ scsi_device_put(sdev);
+}
+
+
+/**
+ * spi_schedule_dv_device - schedule domain validation to occur on the device
+ * @sdev: The device to validate
+ *
+ * Identical to spi_dv_device() above, except that the DV will be
+ * scheduled to occur in a workqueue later. All memory allocations
+ * are atomic, so may be called from any context including those holding
+ * SCSI locks.
+ */
+void
+spi_schedule_dv_device(struct scsi_device *sdev)
+{
+ struct work_queue_wrapper *wqw =
+ kmalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC);
+
+ if (unlikely(!wqw))
+ return;
+
+ if (unlikely(spi_dv_pending(sdev->sdev_target))) {
+ kfree(wqw);
+ return;
+ }
+ /* Set pending early (dv_device doesn't check it, only sets it) */
+ spi_dv_pending(sdev->sdev_target) = 1;
+ if (unlikely(scsi_device_get(sdev))) {
+ kfree(wqw);
+ spi_dv_pending(sdev->sdev_target) = 0;
+ return;
+ }
+
+ INIT_WORK(&wqw->work, spi_dv_device_work_wrapper);
+ wqw->sdev = sdev;
+
+ schedule_work(&wqw->work);
+}
+EXPORT_SYMBOL(spi_schedule_dv_device);
+
+/**
+ * spi_display_xfer_agreement - Print the current target transfer agreement
+ * @starget: The target for which to display the agreement
+ *
+ * Each SPI port is required to maintain a transfer agreement for each
+ * other port on the bus. This function prints a one-line summary of
+ * the current agreement; more detailed information is available in sysfs.
+ */
+void spi_display_xfer_agreement(struct scsi_target *starget)
+{
+ struct spi_transport_attrs *tp;
+ tp = (struct spi_transport_attrs *)&starget->starget_data;
+
+ if (tp->offset > 0 && tp->period > 0) {
+ unsigned int picosec, kb100;
+ char *scsi = "FAST-?";
+ char tmp[8];
+
+ if (tp->period <= SPI_STATIC_PPR) {
+ picosec = ppr_to_ps[tp->period];
+ switch (tp->period) {
+ case 7: scsi = "FAST-320"; break;
+ case 8: scsi = "FAST-160"; break;
+ case 9: scsi = "FAST-80"; break;
+ case 10:
+ case 11: scsi = "FAST-40"; break;
+ case 12: scsi = "FAST-20"; break;
+ }
+ } else {
+ picosec = tp->period * 4000;
+ if (tp->period < 25)
+ scsi = "FAST-20";
+ else if (tp->period < 50)
+ scsi = "FAST-10";
+ else
+ scsi = "FAST-5";
+ }
+
+ kb100 = (10000000 + picosec / 2) / picosec;
+ if (tp->width)
+ kb100 *= 2;
+ sprint_frac(tmp, picosec, 1000);
+
+ dev_info(&starget->dev,
+ "%s %sSCSI %d.%d MB/s %s%s%s%s%s%s%s%s (%s ns, offset %d)\n",
+ scsi, tp->width ? "WIDE " : "", kb100/10, kb100 % 10,
+ tp->dt ? "DT" : "ST",
+ tp->iu ? " IU" : "",
+ tp->qas ? " QAS" : "",
+ tp->rd_strm ? " RDSTRM" : "",
+ tp->rti ? " RTI" : "",
+ tp->wr_flow ? " WRFLOW" : "",
+ tp->pcomp_en ? " PCOMP" : "",
+ tp->hold_mcs ? " HMCS" : "",
+ tmp, tp->offset);
+ } else {
+ dev_info(&starget->dev, "%sasynchronous\n",
+ tp->width ? "wide " : "");
+ }
+}
+EXPORT_SYMBOL(spi_display_xfer_agreement);
+
+int spi_populate_width_msg(unsigned char *msg, int width)
+{
+ msg[0] = EXTENDED_MESSAGE;
+ msg[1] = 2;
+ msg[2] = EXTENDED_WDTR;
+ msg[3] = width;
+ return 4;
+}
+EXPORT_SYMBOL_GPL(spi_populate_width_msg);
+
+int spi_populate_sync_msg(unsigned char *msg, int period, int offset)
+{
+ msg[0] = EXTENDED_MESSAGE;
+ msg[1] = 3;
+ msg[2] = EXTENDED_SDTR;
+ msg[3] = period;
+ msg[4] = offset;
+ return 5;
+}
+EXPORT_SYMBOL_GPL(spi_populate_sync_msg);
+
+int spi_populate_ppr_msg(unsigned char *msg, int period, int offset,
+ int width, int options)
+{
+ msg[0] = EXTENDED_MESSAGE;
+ msg[1] = 6;
+ msg[2] = EXTENDED_PPR;
+ msg[3] = period;
+ msg[4] = 0;
+ msg[5] = offset;
+ msg[6] = width;
+ msg[7] = options;
+ return 8;
+}
+EXPORT_SYMBOL_GPL(spi_populate_ppr_msg);
+
+/**
+ * spi_populate_tag_msg - place a tag message in a buffer
+ * @msg: pointer to the area to place the tag
+ * @cmd: pointer to the scsi command for the tag
+ *
+ * Notes:
+ * designed to create the correct type of tag message for the
+ * particular request. Returns the size of the tag message.
+ * May return 0 if TCQ is disabled for this device.
+ **/
+int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd)
+{
+ if (cmd->flags & SCMD_TAGGED) {
+ *msg++ = SIMPLE_QUEUE_TAG;
+ *msg++ = cmd->request->tag;
+ return 2;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_populate_tag_msg);
+
+#ifdef CONFIG_SCSI_CONSTANTS
+static const char * const one_byte_msgs[] = {
+/* 0x00 */ "Task Complete", NULL /* Extended Message */, "Save Pointers",
+/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
+/* 0x06 */ "Abort Task Set", "Message Reject", "Nop", "Message Parity Error",
+/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
+/* 0x0c */ "Target Reset", "Abort Task", "Clear Task Set",
+/* 0x0f */ "Initiate Recovery", "Release Recovery",
+/* 0x11 */ "Terminate Process", "Continue Task", "Target Transfer Disable",
+/* 0x14 */ NULL, NULL, "Clear ACA", "LUN Reset"
+};
+
+static const char * const two_byte_msgs[] = {
+/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag",
+/* 0x23 */ "Ignore Wide Residue", "ACA"
+};
+
+static const char * const extended_msgs[] = {
+/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
+/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request",
+/* 0x04 */ "Parallel Protocol Request", "Modify Bidirectional Data Pointer"
+};
+
+static void print_nego(const unsigned char *msg, int per, int off, int width)
+{
+ if (per) {
+ char buf[20];
+ period_to_str(buf, msg[per]);
+ printk("period = %s ns ", buf);
+ }
+
+ if (off)
+ printk("offset = %d ", msg[off]);
+ if (width)
+ printk("width = %d ", 8 << msg[width]);
+}
+
+static void print_ptr(const unsigned char *msg, int msb, const char *desc)
+{
+ int ptr = (msg[msb] << 24) | (msg[msb+1] << 16) | (msg[msb+2] << 8) |
+ msg[msb+3];
+ printk("%s = %d ", desc, ptr);
+}
+
+int spi_print_msg(const unsigned char *msg)
+{
+ int len = 1, i;
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 2 + msg[1];
+ if (len == 2)
+ len += 256;
+ if (msg[2] < ARRAY_SIZE(extended_msgs))
+ printk ("%s ", extended_msgs[msg[2]]);
+ else
+ printk ("Extended Message, reserved code (0x%02x) ",
+ (int) msg[2]);
+ switch (msg[2]) {
+ case EXTENDED_MODIFY_DATA_POINTER:
+ print_ptr(msg, 3, "pointer");
+ break;
+ case EXTENDED_SDTR:
+ print_nego(msg, 3, 4, 0);
+ break;
+ case EXTENDED_WDTR:
+ print_nego(msg, 0, 0, 3);
+ break;
+ case EXTENDED_PPR:
+ print_nego(msg, 3, 5, 6);
+ break;
+ case EXTENDED_MODIFY_BIDI_DATA_PTR:
+ print_ptr(msg, 3, "out");
+ print_ptr(msg, 7, "in");
+ break;
+ default:
+ for (i = 2; i < len; ++i)
+ printk("%02x ", msg[i]);
+ }
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("Identify disconnect %sallowed %s %d ",
+ (msg[0] & 0x40) ? "" : "not ",
+ (msg[0] & 0x20) ? "target routine" : "lun",
+ msg[0] & 0x7);
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ if (msg[0] < ARRAY_SIZE(one_byte_msgs) && one_byte_msgs[msg[0]])
+ printk("%s ", one_byte_msgs[msg[0]]);
+ else
+ printk("reserved (%02x) ", msg[0]);
+ } else if (msg[0] == 0x55) {
+ printk("QAS Request ");
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs))
+ printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
+ msg[1]);
+ else
+ printk("reserved two byte (%02x %02x) ",
+ msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("reserved ");
+ return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+
+#else /* ifndef CONFIG_SCSI_CONSTANTS */
+
+int spi_print_msg(const unsigned char *msg)
+{
+ int len = 1, i;
+
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 2 + msg[1];
+ if (len == 2)
+ len += 256;
+ for (i = 0; i < len; ++i)
+ printk("%02x ", msg[i]);
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("%02x ", msg[0]);
+ /* Normal One byte */
+ } else if ((msg[0] < 0x1f) || (msg[0] == 0x55)) {
+ printk("%02x ", msg[0]);
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ printk("%02x %02x", msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("%02x ", msg[0]);
+ return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+#endif /* ! CONFIG_SCSI_CONSTANTS */
+
+static int spi_device_match(struct attribute_container *cont,
+ struct device *dev)
+{
+ struct scsi_device *sdev;
+ struct Scsi_Host *shost;
+ struct spi_internal *i;
+
+ if (!scsi_is_sdev_device(dev))
+ return 0;
+
+ sdev = to_scsi_device(dev);
+ shost = sdev->host;
+ if (!shost->transportt || shost->transportt->host_attrs.ac.class
+ != &spi_host_class.class)
+ return 0;
+ /* Note: this class has no device attributes, so it has
+ * no per-HBA allocation and thus we don't need to distinguish
+ * the attribute containers for the device */
+ i = to_spi_internal(shost->transportt);
+ if (i->f->deny_binding && i->f->deny_binding(sdev->sdev_target))
+ return 0;
+ return 1;
+}
+
+static int spi_target_match(struct attribute_container *cont,
+ struct device *dev)
+{
+ struct Scsi_Host *shost;
+ struct scsi_target *starget;
+ struct spi_internal *i;
+
+ if (!scsi_is_target_device(dev))
+ return 0;
+
+ shost = dev_to_shost(dev->parent);
+ if (!shost->transportt || shost->transportt->host_attrs.ac.class
+ != &spi_host_class.class)
+ return 0;
+
+ i = to_spi_internal(shost->transportt);
+ starget = to_scsi_target(dev);
+
+ if (i->f->deny_binding && i->f->deny_binding(starget))
+ return 0;
+
+ return &i->t.target_attrs.ac == cont;
+}
+
+static DECLARE_TRANSPORT_CLASS(spi_transport_class,
+ "spi_transport",
+ spi_setup_transport_attrs,
+ NULL,
+ spi_target_configure);
+
+static DECLARE_ANON_TRANSPORT_CLASS(spi_device_class,
+ spi_device_match,
+ spi_device_configure);
+
+static struct attribute *host_attributes[] = {
+ &dev_attr_signalling.attr,
+ &dev_attr_host_width.attr,
+ &dev_attr_hba_id.attr,
+ NULL
+};
+
+static struct attribute_group host_attribute_group = {
+ .attrs = host_attributes,
+};
+
+static int spi_host_configure(struct transport_container *tc,
+ struct device *dev,
+ struct device *cdev)
+{
+ struct kobject *kobj = &cdev->kobj;
+ struct Scsi_Host *shost = transport_class_to_shost(cdev);
+ struct spi_internal *si = to_spi_internal(shost->transportt);
+ struct attribute *attr = &dev_attr_signalling.attr;
+ int rc = 0;
+
+ if (si->f->set_signalling)
+ rc = sysfs_chmod_file(kobj, attr, attr->mode | S_IWUSR);
+
+ return rc;
+}
+
+/* returns true if we should be showing the variable. Also
+ * overloads the return by setting 1<<1 if the attribute should
+ * be writeable */
+#define TARGET_ATTRIBUTE_HELPER(name) \
+ (si->f->show_##name ? S_IRUGO : 0) | \
+ (si->f->set_##name ? S_IWUSR : 0)
+
+static umode_t target_attribute_is_visible(struct kobject *kobj,
+ struct attribute *attr, int i)
+{
+ struct device *cdev = container_of(kobj, struct device, kobj);
+ struct scsi_target *starget = transport_class_to_starget(cdev);
+ struct Scsi_Host *shost = transport_class_to_shost(cdev);
+ struct spi_internal *si = to_spi_internal(shost->transportt);
+
+ if (attr == &dev_attr_period.attr &&
+ spi_support_sync(starget))
+ return TARGET_ATTRIBUTE_HELPER(period);
+ else if (attr == &dev_attr_min_period.attr &&
+ spi_support_sync(starget))
+ return TARGET_ATTRIBUTE_HELPER(period);
+ else if (attr == &dev_attr_offset.attr &&
+ spi_support_sync(starget))
+ return TARGET_ATTRIBUTE_HELPER(offset);
+ else if (attr == &dev_attr_max_offset.attr &&
+ spi_support_sync(starget))
+ return TARGET_ATTRIBUTE_HELPER(offset);
+ else if (attr == &dev_attr_width.attr &&
+ spi_support_wide(starget))
+ return TARGET_ATTRIBUTE_HELPER(width);
+ else if (attr == &dev_attr_max_width.attr &&
+ spi_support_wide(starget))
+ return TARGET_ATTRIBUTE_HELPER(width);
+ else if (attr == &dev_attr_iu.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(iu);
+ else if (attr == &dev_attr_max_iu.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(iu);
+ else if (attr == &dev_attr_dt.attr &&
+ spi_support_dt(starget))
+ return TARGET_ATTRIBUTE_HELPER(dt);
+ else if (attr == &dev_attr_qas.attr &&
+ spi_support_qas(starget))
+ return TARGET_ATTRIBUTE_HELPER(qas);
+ else if (attr == &dev_attr_max_qas.attr &&
+ spi_support_qas(starget))
+ return TARGET_ATTRIBUTE_HELPER(qas);
+ else if (attr == &dev_attr_wr_flow.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(wr_flow);
+ else if (attr == &dev_attr_rd_strm.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(rd_strm);
+ else if (attr == &dev_attr_rti.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(rti);
+ else if (attr == &dev_attr_pcomp_en.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(pcomp_en);
+ else if (attr == &dev_attr_hold_mcs.attr &&
+ spi_support_ius(starget))
+ return TARGET_ATTRIBUTE_HELPER(hold_mcs);
+ else if (attr == &dev_attr_revalidate.attr)
+ return S_IWUSR;
+
+ return 0;
+}
+
+static struct attribute *target_attributes[] = {
+ &dev_attr_period.attr,
+ &dev_attr_min_period.attr,
+ &dev_attr_offset.attr,
+ &dev_attr_max_offset.attr,
+ &dev_attr_width.attr,
+ &dev_attr_max_width.attr,
+ &dev_attr_iu.attr,
+ &dev_attr_max_iu.attr,
+ &dev_attr_dt.attr,
+ &dev_attr_qas.attr,
+ &dev_attr_max_qas.attr,
+ &dev_attr_wr_flow.attr,
+ &dev_attr_rd_strm.attr,
+ &dev_attr_rti.attr,
+ &dev_attr_pcomp_en.attr,
+ &dev_attr_hold_mcs.attr,
+ &dev_attr_revalidate.attr,
+ NULL
+};
+
+static struct attribute_group target_attribute_group = {
+ .attrs = target_attributes,
+ .is_visible = target_attribute_is_visible,
+};
+
+static int spi_target_configure(struct transport_container *tc,
+ struct device *dev,
+ struct device *cdev)
+{
+ struct kobject *kobj = &cdev->kobj;
+
+ /* force an update based on parameters read from the device */
+ sysfs_update_group(kobj, &target_attribute_group);
+
+ return 0;
+}
+
+struct scsi_transport_template *
+spi_attach_transport(struct spi_function_template *ft)
+{
+ struct spi_internal *i = kzalloc(sizeof(struct spi_internal),
+ GFP_KERNEL);
+
+ if (unlikely(!i))
+ return NULL;
+
+ i->t.target_attrs.ac.class = &spi_transport_class.class;
+ i->t.target_attrs.ac.grp = &target_attribute_group;
+ i->t.target_attrs.ac.match = spi_target_match;
+ transport_container_register(&i->t.target_attrs);
+ i->t.target_size = sizeof(struct spi_transport_attrs);
+ i->t.host_attrs.ac.class = &spi_host_class.class;
+ i->t.host_attrs.ac.grp = &host_attribute_group;
+ i->t.host_attrs.ac.match = spi_host_match;
+ transport_container_register(&i->t.host_attrs);
+ i->t.host_size = sizeof(struct spi_host_attrs);
+ i->f = ft;
+
+ return &i->t;
+}
+EXPORT_SYMBOL(spi_attach_transport);
+
+void spi_release_transport(struct scsi_transport_template *t)
+{
+ struct spi_internal *i = to_spi_internal(t);
+
+ transport_container_unregister(&i->t.target_attrs);
+ transport_container_unregister(&i->t.host_attrs);
+
+ kfree(i);
+}
+EXPORT_SYMBOL(spi_release_transport);
+
+static __init int spi_transport_init(void)
+{
+ int error = scsi_dev_info_add_list(SCSI_DEVINFO_SPI,
+ "SCSI Parallel Transport Class");
+ if (!error) {
+ int i;
+
+ for (i = 0; spi_static_device_list[i].vendor; i++)
+ scsi_dev_info_list_add_keyed(1, /* compatible */
+ spi_static_device_list[i].vendor,
+ spi_static_device_list[i].model,
+ NULL,
+ spi_static_device_list[i].flags,
+ SCSI_DEVINFO_SPI);
+ }
+
+ error = transport_class_register(&spi_transport_class);
+ if (error)
+ return error;
+ error = anon_transport_class_register(&spi_device_class);
+ return transport_class_register(&spi_host_class);
+}
+
+static void __exit spi_transport_exit(void)
+{
+ transport_class_unregister(&spi_transport_class);
+ anon_transport_class_unregister(&spi_device_class);
+ transport_class_unregister(&spi_host_class);
+ scsi_dev_info_remove_list(SCSI_DEVINFO_SPI);
+}
+
+MODULE_AUTHOR("Martin Hicks");
+MODULE_DESCRIPTION("SPI Transport Attributes");
+MODULE_LICENSE("GPL");
+
+module_init(spi_transport_init);
+module_exit(spi_transport_exit);