ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/usb/gadget/function/f_obex.c b/marvell/linux/drivers/usb/gadget/function/f_obex.c
new file mode 100644
index 0000000..55b7f57
--- /dev/null
+++ b/marvell/linux/drivers/usb/gadget/function/f_obex.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * f_obex.c -- USB CDC OBEX function driver
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * Based on f_acm.c by Al Borchers and David Brownell.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This CDC OBEX function support just packages a TTY-ish byte stream.
+ * A user mode server will put it into "raw" mode and handle all the
+ * relevant protocol details ... this is just a kernel passthrough.
+ * When possible, we prevent gadget enumeration until that server is
+ * ready to handle the commands.
+ */
+
+struct f_obex {
+ struct gserial port;
+ u8 ctrl_id;
+ u8 data_id;
+ u8 cur_alt;
+ u8 port_num;
+};
+
+static inline struct f_obex *func_to_obex(struct usb_function *f)
+{
+ return container_of(f, struct f_obex, port.func);
+}
+
+static inline struct f_obex *port_to_obex(struct gserial *p)
+{
+ return container_of(p, struct f_obex, port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define OBEX_CTRL_IDX 0
+#define OBEX_DATA_IDX 1
+
+static struct usb_string obex_string_defs[] = {
+ [OBEX_CTRL_IDX].s = "CDC Object Exchange (OBEX)",
+ [OBEX_DATA_IDX].s = "CDC OBEX Data",
+ { }, /* end of list */
+};
+
+static struct usb_gadget_strings obex_string_table = {
+ .language = 0x0409, /* en-US */
+ .strings = obex_string_defs,
+};
+
+static struct usb_gadget_strings *obex_strings[] = {
+ &obex_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor obex_control_intf = {
+ .bLength = sizeof(obex_control_intf),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX,
+};
+
+static struct usb_interface_descriptor obex_data_nop_intf = {
+ .bLength = sizeof(obex_data_nop_intf),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 1,
+
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+};
+
+static struct usb_interface_descriptor obex_data_intf = {
+ .bLength = sizeof(obex_data_intf),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 2,
+
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+};
+
+static struct usb_cdc_header_desc obex_cdc_header_desc = {
+ .bLength = sizeof(obex_cdc_header_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+ .bcdCDC = cpu_to_le16(0x0120),
+};
+
+static struct usb_cdc_union_desc obex_cdc_union_desc = {
+ .bLength = sizeof(obex_cdc_union_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+ .bMasterInterface0 = 1,
+ .bSlaveInterface0 = 2,
+};
+
+static struct usb_cdc_obex_desc obex_desc = {
+ .bLength = sizeof(obex_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_OBEX_TYPE,
+ .bcdVersion = cpu_to_le16(0x0100),
+};
+
+/* High-Speed Support */
+
+static struct usb_endpoint_descriptor obex_hs_ep_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor obex_hs_ep_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_function[] = {
+ (struct usb_descriptor_header *) &obex_control_intf,
+ (struct usb_descriptor_header *) &obex_cdc_header_desc,
+ (struct usb_descriptor_header *) &obex_desc,
+ (struct usb_descriptor_header *) &obex_cdc_union_desc,
+
+ (struct usb_descriptor_header *) &obex_data_nop_intf,
+ (struct usb_descriptor_header *) &obex_data_intf,
+ (struct usb_descriptor_header *) &obex_hs_ep_in_desc,
+ (struct usb_descriptor_header *) &obex_hs_ep_out_desc,
+ NULL,
+};
+
+/* Full-Speed Support */
+
+static struct usb_endpoint_descriptor obex_fs_ep_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor obex_fs_ep_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_function[] = {
+ (struct usb_descriptor_header *) &obex_control_intf,
+ (struct usb_descriptor_header *) &obex_cdc_header_desc,
+ (struct usb_descriptor_header *) &obex_desc,
+ (struct usb_descriptor_header *) &obex_cdc_union_desc,
+
+ (struct usb_descriptor_header *) &obex_data_nop_intf,
+ (struct usb_descriptor_header *) &obex_data_intf,
+ (struct usb_descriptor_header *) &obex_fs_ep_in_desc,
+ (struct usb_descriptor_header *) &obex_fs_ep_out_desc,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_obex *obex = func_to_obex(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ if (intf == obex->ctrl_id) {
+ if (alt != 0)
+ goto fail;
+ /* NOP */
+ dev_dbg(&cdev->gadget->dev,
+ "reset obex ttyGS%d control\n", obex->port_num);
+
+ } else if (intf == obex->data_id) {
+ if (alt > 1)
+ goto fail;
+
+ if (obex->port.in->enabled) {
+ dev_dbg(&cdev->gadget->dev,
+ "reset obex ttyGS%d\n", obex->port_num);
+ gserial_disconnect(&obex->port);
+ }
+
+ if (!obex->port.in->desc || !obex->port.out->desc) {
+ dev_dbg(&cdev->gadget->dev,
+ "init obex ttyGS%d\n", obex->port_num);
+ if (config_ep_by_speed(cdev->gadget, f,
+ obex->port.in) ||
+ config_ep_by_speed(cdev->gadget, f,
+ obex->port.out)) {
+ obex->port.out->desc = NULL;
+ obex->port.in->desc = NULL;
+ goto fail;
+ }
+ }
+
+ if (alt == 1) {
+ dev_dbg(&cdev->gadget->dev,
+ "activate obex ttyGS%d\n", obex->port_num);
+ gserial_connect(&obex->port, obex->port_num);
+ }
+
+ } else
+ goto fail;
+
+ obex->cur_alt = alt;
+
+ return 0;
+
+fail:
+ return -EINVAL;
+}
+
+static int obex_get_alt(struct usb_function *f, unsigned intf)
+{
+ struct f_obex *obex = func_to_obex(f);
+
+ return obex->cur_alt;
+}
+
+static void obex_disable(struct usb_function *f)
+{
+ struct f_obex *obex = func_to_obex(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ dev_dbg(&cdev->gadget->dev, "obex ttyGS%d disable\n", obex->port_num);
+ gserial_disconnect(&obex->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void obex_connect(struct gserial *g)
+{
+ struct f_obex *obex = port_to_obex(g);
+ struct usb_composite_dev *cdev = g->func.config->cdev;
+ int status;
+
+ status = usb_function_activate(&g->func);
+ if (status)
+ dev_dbg(&cdev->gadget->dev,
+ "obex ttyGS%d function activate --> %d\n",
+ obex->port_num, status);
+}
+
+static void obex_disconnect(struct gserial *g)
+{
+ struct f_obex *obex = port_to_obex(g);
+ struct usb_composite_dev *cdev = g->func.config->cdev;
+ int status;
+
+ status = usb_function_deactivate(&g->func);
+ if (status)
+ dev_dbg(&cdev->gadget->dev,
+ "obex ttyGS%d function deactivate --> %d\n",
+ obex->port_num, status);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Some controllers can't support CDC OBEX ... */
+static inline bool can_support_obex(struct usb_configuration *c)
+{
+ /* Since the first interface is a NOP, we can ignore the
+ * issue of multi-interface support on most controllers.
+ *
+ * Altsettings are mandatory, however...
+ */
+ if (!gadget_is_altset_supported(c->cdev->gadget))
+ return false;
+
+ /* everything else is *probably* fine ... */
+ return true;
+}
+
+static int obex_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_obex *obex = func_to_obex(f);
+ struct usb_string *us;
+ int status;
+ struct usb_ep *ep;
+
+ if (!can_support_obex(c))
+ return -EINVAL;
+
+ us = usb_gstrings_attach(cdev, obex_strings,
+ ARRAY_SIZE(obex_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ obex_control_intf.iInterface = us[OBEX_CTRL_IDX].id;
+ obex_data_nop_intf.iInterface = us[OBEX_DATA_IDX].id;
+ obex_data_intf.iInterface = us[OBEX_DATA_IDX].id;
+
+ /* allocate instance-specific interface IDs, and patch descriptors */
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ obex->ctrl_id = status;
+
+ obex_control_intf.bInterfaceNumber = status;
+ obex_cdc_union_desc.bMasterInterface0 = status;
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ obex->data_id = status;
+
+ obex_data_nop_intf.bInterfaceNumber = status;
+ obex_data_intf.bInterfaceNumber = status;
+ obex_cdc_union_desc.bSlaveInterface0 = status;
+
+ /* allocate instance-specific endpoints */
+
+ status = -ENODEV;
+ ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc);
+ if (!ep)
+ goto fail;
+ obex->port.in = ep;
+
+ ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc);
+ if (!ep)
+ goto fail;
+ obex->port.out = ep;
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+
+ obex_hs_ep_in_desc.bEndpointAddress =
+ obex_fs_ep_in_desc.bEndpointAddress;
+ obex_hs_ep_out_desc.bEndpointAddress =
+ obex_fs_ep_out_desc.bEndpointAddress;
+
+ status = usb_assign_descriptors(f, fs_function, hs_function, NULL,
+ NULL);
+ if (status)
+ goto fail;
+
+ dev_dbg(&cdev->gadget->dev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
+ obex->port_num,
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ obex->port.in->name, obex->port.out->name);
+
+ return 0;
+
+fail:
+ ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
+
+ return status;
+}
+
+static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
+{
+ return container_of(to_config_group(item), struct f_serial_opts,
+ func_inst.group);
+}
+
+static void obex_attr_release(struct config_item *item)
+{
+ struct f_serial_opts *opts = to_f_serial_opts(item);
+
+ usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations obex_item_ops = {
+ .release = obex_attr_release,
+};
+
+static ssize_t f_obex_port_num_show(struct config_item *item, char *page)
+{
+ return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
+}
+
+CONFIGFS_ATTR_RO(f_obex_, port_num);
+
+static struct configfs_attribute *acm_attrs[] = {
+ &f_obex_attr_port_num,
+ NULL,
+};
+
+static const struct config_item_type obex_func_type = {
+ .ct_item_ops = &obex_item_ops,
+ .ct_attrs = acm_attrs,
+ .ct_owner = THIS_MODULE,
+};
+
+static void obex_free_inst(struct usb_function_instance *f)
+{
+ struct f_serial_opts *opts;
+
+ opts = container_of(f, struct f_serial_opts, func_inst);
+ gserial_free_line(opts->port_num);
+ kfree(opts);
+}
+
+static struct usb_function_instance *obex_alloc_inst(void)
+{
+ struct f_serial_opts *opts;
+ int ret;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+
+ opts->func_inst.free_func_inst = obex_free_inst;
+ ret = gserial_alloc_line(&opts->port_num);
+ if (ret) {
+ kfree(opts);
+ return ERR_PTR(ret);
+ }
+ config_group_init_type_name(&opts->func_inst.group, "",
+ &obex_func_type);
+
+ return &opts->func_inst;
+}
+
+static void obex_free(struct usb_function *f)
+{
+ struct f_obex *obex;
+
+ obex = func_to_obex(f);
+ kfree(obex);
+}
+
+static void obex_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ usb_free_all_descriptors(f);
+}
+
+static struct usb_function *obex_alloc(struct usb_function_instance *fi)
+{
+ struct f_obex *obex;
+ struct f_serial_opts *opts;
+
+ /* allocate and initialize one new instance */
+ obex = kzalloc(sizeof(*obex), GFP_KERNEL);
+ if (!obex)
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_serial_opts, func_inst);
+
+ obex->port_num = opts->port_num;
+
+ obex->port.connect = obex_connect;
+ obex->port.disconnect = obex_disconnect;
+
+ obex->port.func.name = "obex";
+ /* descriptors are per-instance copies */
+ obex->port.func.bind = obex_bind;
+ obex->port.func.unbind = obex_unbind;
+ obex->port.func.set_alt = obex_set_alt;
+ obex->port.func.get_alt = obex_get_alt;
+ obex->port.func.disable = obex_disable;
+ obex->port.func.free_func = obex_free;
+ obex->port.func.bind_deactivated = true;
+
+ return &obex->port.func;
+}
+
+DECLARE_USB_FUNCTION_INIT(obex, obex_alloc_inst, obex_alloc);
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_LICENSE("GPL");