ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/drivers/usb/storage/shuttle_usbat.c b/marvell/linux/drivers/usb/storage/shuttle_usbat.c
new file mode 100644
index 0000000..54aa139
--- /dev/null
+++ b/marvell/linux/drivers/usb/storage/shuttle_usbat.c
@@ -0,0 +1,1872 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * Current development and maintenance by:
+ * (c) 2000, 2001 Robert Baruch (autophile@starband.net)
+ * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * Developed with the assistance of:
+ * (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Flash support based on earlier work by:
+ * (c) 2002 Thomas Kreiling <usbdev@sm04.de>
+ *
+ * Many originally ATAPI devices were slightly modified to meet the USB
+ * market by using some kind of translation from ATAPI to USB on the host,
+ * and the peripheral would translate from USB back to ATAPI.
+ *
+ * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only,
+ * which does the USB-to-ATAPI conversion. By obtaining the data sheet on
+ * their device under nondisclosure agreement, I have been able to write
+ * this driver for Linux.
+ *
+ * The chip used in the device can also be used for EPP and ISA translation
+ * as well. This driver is only guaranteed to work with the ATAPI
+ * translation.
+ *
+ * See the Kconfig help text for a list of devices known to be supported by
+ * this driver.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/cdrom.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-usbat"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+/* Supported device types */
+#define USBAT_DEV_HP8200 0x01
+#define USBAT_DEV_FLASH 0x02
+
+#define USBAT_EPP_PORT 0x10
+#define USBAT_EPP_REGISTER 0x30
+#define USBAT_ATA 0x40
+#define USBAT_ISA 0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG 0x00
+#define USBAT_CMD_WRITE_REG 0x01
+#define USBAT_CMD_READ_BLOCK 0x02
+#define USBAT_CMD_WRITE_BLOCK 0x03
+#define USBAT_CMD_COND_READ_BLOCK 0x04
+#define USBAT_CMD_COND_WRITE_BLOCK 0x05
+#define USBAT_CMD_WRITE_REGS 0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD 0x80
+#define USBAT_CMD_SET_FEAT 0x81
+#define USBAT_CMD_UIO 0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ 1
+#define USBAT_UIO_WRITE 0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ 0x20 /* full compare */
+#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE 0
+#define USBAT_FLASH_MEDIA_CF 1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME 0
+#define USBAT_FLASH_MEDIA_CHANGED 1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
+#define USBAT_ATA_ERROR 0x11 /* error (R) */
+#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
+#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS 0x17 /* device status (R) */
+#define USBAT_ATA_CMD 0x17 /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
+ /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1 0x20 /* I/O 1 */
+#define USBAT_UIO_0 0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1 0x04 /* Input 1 */
+#define USBAT_UIO_UI0 0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
+ /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
+#define USBAT_FEAT_U1 0x08
+#define USBAT_FEAT_U0 0x04
+#define USBAT_FEAT_ET1 0x02
+#define USBAT_FEAT_ET2 0x01
+
+struct usbat_info {
+ int devicetype;
+
+ /* Used for Flash readers only */
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+static int transferred = 0;
+
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id usbat_usb_ids[] = {
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/*
+ * Convenience function to produce an ATA read/write sectors command
+ * Use cmd=0x20 for read, cmd=0x30 for write
+ */
+static void usbat_pack_ata_sector_cmd(unsigned char *buf,
+ unsigned char thistime,
+ u32 sector, unsigned char cmd)
+{
+ buf[0] = 0;
+ buf[1] = thistime;
+ buf[2] = sector & 0xFF;
+ buf[3] = (sector >> 8) & 0xFF;
+ buf[4] = (sector >> 16) & 0xFF;
+ buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
+ buf[6] = cmd;
+}
+
+/*
+ * Convenience function to get the device type (flash or hp8200)
+ */
+static int usbat_get_device_type(struct us_data *us)
+{
+ return ((struct usbat_info*)us->extra)->devicetype;
+}
+
+/*
+ * Read a register from the device
+ */
+static int usbat_read(struct us_data *us,
+ unsigned char access,
+ unsigned char reg,
+ unsigned char *content)
+{
+ return usb_stor_ctrl_transfer(us,
+ us->recv_ctrl_pipe,
+ access | USBAT_CMD_READ_REG,
+ 0xC0,
+ (u16)reg,
+ 0,
+ content,
+ 1);
+}
+
+/*
+ * Write to a register on the device
+ */
+static int usbat_write(struct us_data *us,
+ unsigned char access,
+ unsigned char reg,
+ unsigned char content)
+{
+ return usb_stor_ctrl_transfer(us,
+ us->send_ctrl_pipe,
+ access | USBAT_CMD_WRITE_REG,
+ 0x40,
+ short_pack(reg, content),
+ 0,
+ NULL,
+ 0);
+}
+
+/*
+ * Convenience function to perform a bulk read
+ */
+static int usbat_bulk_read(struct us_data *us,
+ void* buf,
+ unsigned int len,
+ int use_sg)
+{
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
+}
+
+/*
+ * Convenience function to perform a bulk write
+ */
+static int usbat_bulk_write(struct us_data *us,
+ void* buf,
+ unsigned int len,
+ int use_sg)
+{
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
+}
+
+/*
+ * Some USBAT-specific commands can only be executed over a command transport
+ * This transport allows one (len=8) or two (len=16) vendor-specific commands
+ * to be executed.
+ */
+static int usbat_execute_command(struct us_data *us,
+ unsigned char *commands,
+ unsigned int len)
+{
+ return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
+ commands, len);
+}
+
+/*
+ * Read the status register
+ */
+static int usbat_get_status(struct us_data *us, unsigned char *status)
+{
+ int rc;
+ rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
+
+ usb_stor_dbg(us, "0x%02X\n", *status);
+ return rc;
+}
+
+/*
+ * Check the device status
+ */
+static int usbat_check_status(struct us_data *us)
+{
+ unsigned char *reply = us->iobuf;
+ int rc;
+
+ rc = usbat_get_status(us, reply);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* error/check condition (0x51 is ok) */
+ if (*reply & 0x01 && *reply != 0x51)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* device fault */
+ if (*reply & 0x20)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Stores critical information in internal registers in preparation for the execution
+ * of a conditional usbat_read_blocks or usbat_write_blocks call.
+ */
+static int usbat_set_shuttle_features(struct us_data *us,
+ unsigned char external_trigger,
+ unsigned char epp_control,
+ unsigned char mask_byte,
+ unsigned char test_pattern,
+ unsigned char subcountH,
+ unsigned char subcountL)
+{
+ unsigned char *command = us->iobuf;
+
+ command[0] = 0x40;
+ command[1] = USBAT_CMD_SET_FEAT;
+
+ /*
+ * The only bit relevant to ATA access is bit 6
+ * which defines 8 bit data access (set) or 16 bit (unset)
+ */
+ command[2] = epp_control;
+
+ /*
+ * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+ * ET1 and ET2 define an external event to be checked for on event of a
+ * _read_blocks or _write_blocks operation. The read/write will not take
+ * place unless the defined trigger signal is active.
+ */
+ command[3] = external_trigger;
+
+ /*
+ * The resultant byte of the mask operation (see mask_byte) is compared for
+ * equivalence with this test pattern. If equal, the read/write will take
+ * place.
+ */
+ command[4] = test_pattern;
+
+ /*
+ * This value is logically ANDed with the status register field specified
+ * in the read/write command.
+ */
+ command[5] = mask_byte;
+
+ /*
+ * If ALQ is set in the qualifier, this field contains the address of the
+ * registers where the byte count should be read for transferring the data.
+ * If ALQ is not set, then this field contains the number of bytes to be
+ * transferred.
+ */
+ command[6] = subcountL;
+ command[7] = subcountH;
+
+ return usbat_execute_command(us, command, 8);
+}
+
+/*
+ * Block, waiting for an ATA device to become not busy or to report
+ * an error condition.
+ */
+static int usbat_wait_not_busy(struct us_data *us, int minutes)
+{
+ int i;
+ int result;
+ unsigned char *status = us->iobuf;
+
+ /*
+ * Synchronizing cache on a CDR could take a heck of a long time,
+ * but probably not more than 10 minutes or so. On the other hand,
+ * doing a full blank on a CDRW at speed 1 will take about 75
+ * minutes!
+ */
+
+ for (i=0; i<1200+minutes*60; i++) {
+
+ result = usbat_get_status(us, status);
+
+ if (result!=USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ if (*status & 0x01) { /* check condition */
+ result = usbat_read(us, USBAT_ATA, 0x10, status);
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ if (*status & 0x20) /* device fault */
+ return USB_STOR_TRANSPORT_FAILED;
+
+ if ((*status & 0x80)==0x00) { /* not busy */
+ usb_stor_dbg(us, "Waited not busy for %d steps\n", i);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (i<500)
+ msleep(10); /* 5 seconds */
+ else if (i<700)
+ msleep(50); /* 10 seconds */
+ else if (i<1200)
+ msleep(100); /* 50 seconds */
+ else
+ msleep(1000); /* X minutes */
+ }
+
+ usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n",
+ minutes);
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Read block data from the data register
+ */
+static int usbat_read_block(struct us_data *us,
+ void* buf,
+ unsigned short len,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ if (!len)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ command[0] = 0xC0;
+ command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = 0;
+ command[4] = 0;
+ command[5] = 0;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = usbat_bulk_read(us, buf, len, use_sg);
+ return (result == USB_STOR_XFER_GOOD ?
+ USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+}
+
+/*
+ * Write block data via the data register
+ */
+static int usbat_write_block(struct us_data *us,
+ unsigned char access,
+ void* buf,
+ unsigned short len,
+ int minutes,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ if (!len)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ command[0] = 0x40;
+ command[1] = access | USBAT_CMD_WRITE_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = 0;
+ command[4] = 0;
+ command[5] = 0;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ result = usbat_execute_command(us, command, 8);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = usbat_bulk_write(us, buf, len, use_sg);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return usbat_wait_not_busy(us, minutes);
+}
+
+/*
+ * Process read and write requests
+ */
+static int usbat_hp8200e_rw_block_test(struct us_data *us,
+ unsigned char access,
+ unsigned char *registers,
+ unsigned char *data_out,
+ unsigned short num_registers,
+ unsigned char data_reg,
+ unsigned char status_reg,
+ unsigned char timeout,
+ unsigned char qualifier,
+ int direction,
+ void *buf,
+ unsigned short len,
+ int use_sg,
+ int minutes)
+{
+ int result;
+ unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+
+ unsigned char *command = us->iobuf;
+ int i, j;
+ int cmdlen;
+ unsigned char *data = us->iobuf;
+ unsigned char *status = us->iobuf;
+
+ BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+ for (i=0; i<20; i++) {
+
+ /*
+ * The first time we send the full command, which consists
+ * of downloading the SCSI command followed by downloading
+ * the data via a write-and-test. Any other time we only
+ * send the command to download the data -- the SCSI command
+ * is still 'active' in some sense in the device.
+ *
+ * We're only going to try sending the data 10 times. After
+ * that, we just return a failure.
+ */
+
+ if (i==0) {
+ cmdlen = 16;
+ /*
+ * Write to multiple registers
+ * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
+ * necessary here, but that's what came out of the
+ * trace every single time.
+ */
+ command[0] = 0x40;
+ command[1] = access | USBAT_CMD_WRITE_REGS;
+ command[2] = 0x07;
+ command[3] = 0x17;
+ command[4] = 0xFC;
+ command[5] = 0xE7;
+ command[6] = LSB_of(num_registers*2);
+ command[7] = MSB_of(num_registers*2);
+ } else
+ cmdlen = 8;
+
+ /* Conditionally read or write blocks */
+ command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
+ command[cmdlen-7] = access |
+ (direction==DMA_TO_DEVICE ?
+ USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
+ command[cmdlen-6] = data_reg;
+ command[cmdlen-5] = status_reg;
+ command[cmdlen-4] = timeout;
+ command[cmdlen-3] = qualifier;
+ command[cmdlen-2] = LSB_of(len);
+ command[cmdlen-1] = MSB_of(len);
+
+ result = usbat_execute_command(us, command, cmdlen);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (i==0) {
+
+ for (j=0; j<num_registers; j++) {
+ data[j<<1] = registers[j];
+ data[1+(j<<1)] = data_out[j];
+ }
+
+ result = usbat_bulk_write(us, data, num_registers*2, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ }
+
+ result = usb_stor_bulk_transfer_sg(us,
+ pipe, buf, len, use_sg, NULL);
+
+ /*
+ * If we get a stall on the bulk download, we'll retry
+ * the bulk download -- but not the SCSI command because
+ * in some sense the SCSI command is still 'active' and
+ * waiting for the data. Don't ask me why this should be;
+ * I'm only following what the Windoze driver did.
+ *
+ * Note that a stall for the test-and-read/write command means
+ * that the test failed. In this case we're testing to make
+ * sure that the device is error-free
+ * (i.e. bit 0 -- CHK -- of status is 0). The most likely
+ * hypothesis is that the USBAT chip somehow knows what
+ * the device will accept, but doesn't give the device any
+ * data until all data is received. Thus, the device would
+ * still be waiting for the first byte of data if a stall
+ * occurs, even if the stall implies that some data was
+ * transferred.
+ */
+
+ if (result == USB_STOR_XFER_SHORT ||
+ result == USB_STOR_XFER_STALLED) {
+
+ /*
+ * If we're reading and we stalled, then clear
+ * the bulk output pipe only the first time.
+ */
+
+ if (direction==DMA_FROM_DEVICE && i==0) {
+ if (usb_stor_clear_halt(us,
+ us->send_bulk_pipe) < 0)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /*
+ * Read status: is the device angry, or just busy?
+ */
+
+ result = usbat_read(us, USBAT_ATA,
+ direction==DMA_TO_DEVICE ?
+ USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
+ status);
+
+ if (result!=USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ if (*status & 0x01) /* check condition */
+ return USB_STOR_TRANSPORT_FAILED;
+ if (*status & 0x20) /* device fault */
+ return USB_STOR_TRANSPORT_FAILED;
+
+ usb_stor_dbg(us, "Redoing %s\n",
+ direction == DMA_TO_DEVICE
+ ? "write" : "read");
+
+ } else if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ else
+ return usbat_wait_not_busy(us, minutes);
+
+ }
+
+ usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n",
+ direction == DMA_TO_DEVICE ? "Writing" : "Reading");
+
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Write to multiple registers:
+ * Allows us to write specific data to any registers. The data to be written
+ * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
+ * which gets sent through bulk out.
+ * Not designed for large transfers of data!
+ */
+static int usbat_multiple_write(struct us_data *us,
+ unsigned char *registers,
+ unsigned char *data_out,
+ unsigned short num_registers)
+{
+ int i, result;
+ unsigned char *data = us->iobuf;
+ unsigned char *command = us->iobuf;
+
+ BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+ /* Write to multiple registers, ATA access */
+ command[0] = 0x40;
+ command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
+
+ /* No relevance */
+ command[2] = 0;
+ command[3] = 0;
+ command[4] = 0;
+ command[5] = 0;
+
+ /* Number of bytes to be transferred (incl. addresses and data) */
+ command[6] = LSB_of(num_registers*2);
+ command[7] = MSB_of(num_registers*2);
+
+ /* The setup command */
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Create the reg/data, reg/data sequence */
+ for (i=0; i<num_registers; i++) {
+ data[i<<1] = registers[i];
+ data[1+(i<<1)] = data_out[i];
+ }
+
+ /* Send the data */
+ result = usbat_bulk_write(us, data, num_registers*2, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+ return usbat_wait_not_busy(us, 0);
+ else
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally read blocks from device:
+ * Allows us to read blocks from a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the read will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_read_blocks(struct us_data *us,
+ void* buffer,
+ int len,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ command[0] = 0xC0;
+ command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = USBAT_ATA_STATUS;
+ command[4] = 0xFD; /* Timeout (ms); */
+ command[5] = USBAT_QUAL_FCQ;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ /* Multiple block read setup command */
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* Read the blocks we just asked for */
+ result = usbat_bulk_read(us, buffer, len, use_sg);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally write blocks to device:
+ * Allows us to write blocks to a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the write will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_write_blocks(struct us_data *us,
+ void* buffer,
+ int len,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ command[0] = 0x40;
+ command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = USBAT_ATA_STATUS;
+ command[4] = 0xFD; /* Timeout (ms) */
+ command[5] = USBAT_QUAL_FCQ;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ /* Multiple block write setup command */
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* Write the data */
+ result = usbat_bulk_write(us, buffer, len, use_sg);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read the User IO register
+ */
+static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
+{
+ int result;
+
+ result = usb_stor_ctrl_transfer(us,
+ us->recv_ctrl_pipe,
+ USBAT_CMD_UIO,
+ 0xC0,
+ 0,
+ 0,
+ data_flags,
+ USBAT_UIO_READ);
+
+ usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags);
+
+ return result;
+}
+
+/*
+ * Write to the User IO register
+ */
+static int usbat_write_user_io(struct us_data *us,
+ unsigned char enable_flags,
+ unsigned char data_flags)
+{
+ return usb_stor_ctrl_transfer(us,
+ us->send_ctrl_pipe,
+ USBAT_CMD_UIO,
+ 0x40,
+ short_pack(enable_flags, data_flags),
+ 0,
+ NULL,
+ USBAT_UIO_WRITE);
+}
+
+/*
+ * Reset the device
+ * Often needed on media change.
+ */
+static int usbat_device_reset(struct us_data *us)
+{
+ int rc;
+
+ /*
+ * Reset peripheral, enable peripheral control signals
+ * (bring reset signal up)
+ */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /*
+ * Enable peripheral control signals
+ * (bring reset signal down)
+ */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Enable card detect
+ */
+static int usbat_device_enable_cdt(struct us_data *us)
+{
+ int rc;
+
+ /* Enable peripheral control signals and card detect */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine if media is present.
+ */
+static int usbat_flash_check_media_present(struct us_data *us,
+ unsigned char *uio)
+{
+ if (*uio & USBAT_UIO_UI0) {
+ usb_stor_dbg(us, "no media detected\n");
+ return USBAT_FLASH_MEDIA_NONE;
+ }
+
+ return USBAT_FLASH_MEDIA_CF;
+}
+
+/*
+ * Determine if media has changed since last operation
+ */
+static int usbat_flash_check_media_changed(struct us_data *us,
+ unsigned char *uio)
+{
+ if (*uio & USBAT_UIO_0) {
+ usb_stor_dbg(us, "media change detected\n");
+ return USBAT_FLASH_MEDIA_CHANGED;
+ }
+
+ return USBAT_FLASH_MEDIA_SAME;
+}
+
+/*
+ * Check for media change / no media and handle the situation appropriately
+ */
+static int usbat_flash_check_media(struct us_data *us,
+ struct usbat_info *info)
+{
+ int rc;
+ unsigned char *uio = us->iobuf;
+
+ rc = usbat_read_user_io(us, uio);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Check for media existence */
+ rc = usbat_flash_check_media_present(us, uio);
+ if (rc == USBAT_FLASH_MEDIA_NONE) {
+ info->sense_key = 0x02;
+ info->sense_asc = 0x3A;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* Check for media change */
+ rc = usbat_flash_check_media_changed(us, uio);
+ if (rc == USBAT_FLASH_MEDIA_CHANGED) {
+
+ /* Reset and re-enable card detect */
+ rc = usbat_device_reset(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+ rc = usbat_device_enable_cdt(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ msleep(50);
+
+ rc = usbat_read_user_io(us, uio);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ info->sense_key = UNIT_ATTENTION;
+ info->sense_asc = 0x28;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine whether we are controlling a flash-based reader/writer,
+ * or a HP8200-based CD drive.
+ * Sets transport functions as appropriate.
+ */
+static int usbat_identify_device(struct us_data *us,
+ struct usbat_info *info)
+{
+ int rc;
+ unsigned char status;
+
+ if (!us || !info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ rc = usbat_device_reset(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+ msleep(500);
+
+ /*
+ * In attempt to distinguish between HP CDRW's and Flash readers, we now
+ * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
+ * readers), this command should fail with error. On ATAPI devices (i.e.
+ * CDROM drives), it should succeed.
+ */
+ rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ rc = usbat_get_status(us, &status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Check for error bit, or if the command 'fell through' */
+ if (status == 0xA1 || !(status & 0x01)) {
+ /* Device is HP 8200 */
+ usb_stor_dbg(us, "Detected HP8200 CDRW\n");
+ info->devicetype = USBAT_DEV_HP8200;
+ } else {
+ /* Device is a CompactFlash reader/writer */
+ usb_stor_dbg(us, "Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Set the transport function based on the device type
+ */
+static int usbat_set_transport(struct us_data *us,
+ struct usbat_info *info,
+ int devicetype)
+{
+
+ if (!info->devicetype)
+ info->devicetype = devicetype;
+
+ if (!info->devicetype)
+ usbat_identify_device(us, info);
+
+ switch (info->devicetype) {
+ default:
+ return USB_STOR_TRANSPORT_ERROR;
+
+ case USBAT_DEV_HP8200:
+ us->transport = usbat_hp8200e_transport;
+ break;
+
+ case USBAT_DEV_FLASH:
+ us->transport = usbat_flash_transport;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Read the media capacity
+ */
+static int usbat_flash_get_sector_count(struct us_data *us,
+ struct usbat_info *info)
+{
+ unsigned char registers[3] = {
+ USBAT_ATA_SECCNT,
+ USBAT_ATA_DEVICE,
+ USBAT_ATA_CMD,
+ };
+ unsigned char command[3] = { 0x01, 0xA0, 0xEC };
+ unsigned char *reply;
+ unsigned char status;
+ int rc;
+
+ if (!us || !info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ reply = kmalloc(512, GFP_NOIO);
+ if (!reply)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* ATA command : IDENTIFY DEVICE */
+ rc = usbat_multiple_write(us, registers, command, 3);
+ if (rc != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Gah! identify_device failed\n");
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ /* Read device status */
+ if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ msleep(100);
+
+ /* Read the device identification data */
+ rc = usbat_read_block(us, reply, 512, 0);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ info->sectors = ((u32)(reply[117]) << 24) |
+ ((u32)(reply[116]) << 16) |
+ ((u32)(reply[115]) << 8) |
+ ((u32)(reply[114]) );
+
+ rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(reply);
+ return rc;
+}
+
+/*
+ * Read data from device
+ */
+static int usbat_flash_read_data(struct us_data *us,
+ struct usbat_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char registers[7] = {
+ USBAT_ATA_FEATURES,
+ USBAT_ATA_SECCNT,
+ USBAT_ATA_SECNUM,
+ USBAT_ATA_LBA_ME,
+ USBAT_ATA_LBA_HI,
+ USBAT_ATA_DEVICE,
+ USBAT_ATA_STATUS,
+ };
+ unsigned char command[7];
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ result = usbat_flash_check_media(us, info);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if Jumpshot
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB CF card.
+ */
+
+ if (sector > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ totallen = sectors * info->ssize;
+
+ /*
+ * Since we don't read more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ /* ATA command 0x20 (READ SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
+
+ /* Write/execute ATA read command */
+ result = usbat_multiple_write(us, registers, command, 7);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ /* Read the data we just requested */
+ result = usbat_read_blocks(us, buffer, len, 0);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ usb_stor_dbg(us, "%d bytes\n", len);
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, TO_XFER_BUF);
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_GOOD;
+
+leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Write data to device
+ */
+static int usbat_flash_write_data(struct us_data *us,
+ struct usbat_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char registers[7] = {
+ USBAT_ATA_FEATURES,
+ USBAT_ATA_SECCNT,
+ USBAT_ATA_SECNUM,
+ USBAT_ATA_LBA_ME,
+ USBAT_ATA_LBA_HI,
+ USBAT_ATA_DEVICE,
+ USBAT_ATA_STATUS,
+ };
+ unsigned char command[7];
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ result = usbat_flash_check_media(us, info);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if the device
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB media.
+ */
+
+ if (sector > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ totallen = sectors * info->ssize;
+
+ /*
+ * Since we don't write more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ /* Get the data from the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, FROM_XFER_BUF);
+
+ /* ATA command 0x30 (WRITE SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
+
+ /* Write/execute ATA write command */
+ result = usbat_multiple_write(us, registers, command, 7);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ /* Write the data */
+ result = usbat_write_blocks(us, buffer, len, 0);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return result;
+
+leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Squeeze a potentially huge (> 65535 byte) read10 command into
+ * a little ( <= 65535 byte) ATAPI pipe
+ */
+static int usbat_hp8200e_handle_read10(struct us_data *us,
+ unsigned char *registers,
+ unsigned char *data,
+ struct scsi_cmnd *srb)
+{
+ int result = USB_STOR_TRANSPORT_GOOD;
+ unsigned char *buffer;
+ unsigned int len;
+ unsigned int sector;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ usb_stor_dbg(us, "transfersize %d\n", srb->transfersize);
+
+ if (scsi_bufflen(srb) < 0x10000) {
+
+ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
+ registers, data, 19,
+ USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+ (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+ DMA_FROM_DEVICE,
+ scsi_sglist(srb),
+ scsi_bufflen(srb), scsi_sg_count(srb), 1);
+
+ return result;
+ }
+
+ /*
+ * Since we're requesting more data than we can handle in
+ * a single read command (max is 64k-1), we will perform
+ * multiple reads, but each read must be in multiples of
+ * a sector. Luckily the sector size is in srb->transfersize
+ * (see linux/drivers/scsi/sr.c).
+ */
+
+ if (data[7+0] == GPCMD_READ_CD) {
+ len = short_pack(data[7+9], data[7+8]);
+ len <<= 16;
+ len |= data[7+7];
+ usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len);
+ srb->transfersize = scsi_bufflen(srb)/len;
+ }
+
+ if (!srb->transfersize) {
+ srb->transfersize = 2048; /* A guess */
+ usb_stor_dbg(us, "transfersize 0, forcing %d\n",
+ srb->transfersize);
+ }
+
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
+
+ len = (65535/srb->transfersize) * srb->transfersize;
+ usb_stor_dbg(us, "Max read is %d bytes\n", len);
+ len = min(len, scsi_bufflen(srb));
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) /* bloody hell! */
+ return USB_STOR_TRANSPORT_FAILED;
+ sector = short_pack(data[7+3], data[7+2]);
+ sector <<= 16;
+ sector |= short_pack(data[7+5], data[7+4]);
+ transferred = 0;
+
+ while (transferred != scsi_bufflen(srb)) {
+
+ if (len > scsi_bufflen(srb) - transferred)
+ len = scsi_bufflen(srb) - transferred;
+
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+
+ /* Fix up the SCSI command sector and num sectors */
+
+ data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
+ data[7+3] = LSB_of(sector>>16);
+ data[7+4] = MSB_of(sector&0xFFFF);
+ data[7+5] = LSB_of(sector&0xFFFF);
+ if (data[7+0] == GPCMD_READ_CD)
+ data[7+6] = 0;
+ data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
+ data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
+
+ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
+ registers, data, 19,
+ USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+ (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+ DMA_FROM_DEVICE,
+ buffer,
+ len, 0, 1);
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, srb,
+ &sg, &sg_offset, TO_XFER_BUF);
+
+ /* Update the amount transferred and the sector number */
+
+ transferred += len;
+ sector += len / srb->transfersize;
+
+ } /* while transferred != scsi_bufflen(srb) */
+
+ kfree(buffer);
+ return result;
+}
+
+static int usbat_select_and_test_registers(struct us_data *us)
+{
+ int selector;
+ unsigned char *status = us->iobuf;
+
+ /* try device = master, then device = slave. */
+ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Initialize the USBAT processor and the storage device
+ */
+static int init_usbat(struct us_data *us, int devicetype)
+{
+ int rc;
+ struct usbat_info *info;
+ unsigned char subcountH = USBAT_ATA_LBA_HI;
+ unsigned char subcountL = USBAT_ATA_LBA_ME;
+ unsigned char *status = us->iobuf;
+
+ us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
+ if (!us->extra)
+ return 1;
+
+ info = (struct usbat_info *) (us->extra);
+
+ /* Enable peripheral control signals */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 1\n");
+
+ msleep(2000);
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 2\n");
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 3\n");
+
+ rc = usbat_select_and_test_registers(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 4\n");
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 5\n");
+
+ /* Enable peripheral control signals and card detect */
+ rc = usbat_device_enable_cdt(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 6\n");
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 7\n");
+
+ msleep(1400);
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 8\n");
+
+ rc = usbat_select_and_test_registers(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 9\n");
+
+ /* At this point, we need to detect which device we are using */
+ if (usbat_set_transport(us, info, devicetype))
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 10\n");
+
+ if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
+ subcountH = 0x02;
+ subcountL = 0x00;
+ }
+ rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
+ 0x00, 0x88, 0x08, subcountH, subcountL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 11\n");
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Transport for the HP 8200e
+ */
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int result;
+ unsigned char *status = us->iobuf;
+ unsigned char registers[32];
+ unsigned char data[32];
+ unsigned int len;
+ int i;
+
+ len = scsi_bufflen(srb);
+
+ /*
+ * Send A0 (ATA PACKET COMMAND).
+ * Note: I guess we're never going to get any of the ATA
+ * commands... just ATA Packet Commands.
+ */
+
+ registers[0] = USBAT_ATA_FEATURES;
+ registers[1] = USBAT_ATA_SECCNT;
+ registers[2] = USBAT_ATA_SECNUM;
+ registers[3] = USBAT_ATA_LBA_ME;
+ registers[4] = USBAT_ATA_LBA_HI;
+ registers[5] = USBAT_ATA_DEVICE;
+ registers[6] = USBAT_ATA_CMD;
+ data[0] = 0x00;
+ data[1] = 0x00;
+ data[2] = 0x00;
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+ data[5] = 0xB0; /* (device sel) = slave */
+ data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
+
+ for (i=7; i<19; i++) {
+ registers[i] = 0x10;
+ data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
+ }
+
+ result = usbat_get_status(us, status);
+ usb_stor_dbg(us, "Status = %02X\n", *status);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ if (srb->cmnd[0] == TEST_UNIT_READY)
+ transferred = 0;
+
+ if (srb->sc_data_direction == DMA_TO_DEVICE) {
+
+ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
+ registers, data, 19,
+ USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+ (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+ DMA_TO_DEVICE,
+ scsi_sglist(srb),
+ len, scsi_sg_count(srb), 10);
+
+ if (result == USB_STOR_TRANSPORT_GOOD) {
+ transferred += len;
+ usb_stor_dbg(us, "Wrote %08X bytes\n", transferred);
+ }
+
+ return result;
+
+ } else if (srb->cmnd[0] == READ_10 ||
+ srb->cmnd[0] == GPCMD_READ_CD) {
+
+ return usbat_hp8200e_handle_read10(us, registers, data, srb);
+
+ }
+
+ if (len > 0xFFFF) {
+ usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n",
+ len);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ result = usbat_multiple_write(us, registers, data, 7);
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /*
+ * Write the 12-byte command header.
+ *
+ * If the command is BLANK then set the timer for 75 minutes.
+ * Otherwise set it for 10 minutes.
+ *
+ * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+ * AT SPEED 4 IS UNRELIABLE!!!
+ */
+
+ result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12,
+ srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0);
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /* If there is response data to be read in then do it here. */
+
+ if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
+
+ /* How many bytes to read in? Check cylL register */
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD) {
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (len > 0xFF) { /* need to read cylH also */
+ len = *status;
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
+ USB_STOR_XFER_GOOD) {
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ len += ((unsigned int) *status)<<8;
+ }
+ else
+ len = *status;
+
+
+ result = usbat_read_block(us, scsi_sglist(srb), len,
+ scsi_sg_count(srb));
+ }
+
+ return result;
+}
+
+/*
+ * Transport for USBAT02-based CompactFlash and similar storage devices
+ */
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
+{
+ int rc;
+ struct usbat_info *info = (struct usbat_info *) (us->extra);
+ unsigned long block, blocks;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_response[36] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (srb->cmnd[0] == INQUIRY) {
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+ memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ rc = usbat_flash_check_media(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ rc = usbat_flash_get_sector_count(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ /* hard coded 512 byte sectors as per ATA spec */
+ info->ssize = 0x200;
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
+
+ /*
+ * build the reply
+ * note: must return the sector number of the last sector,
+ * *not* the total number of sectors
+ */
+ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SELECT_10) {
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (srb->cmnd[0] == READ_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == READ_12) {
+ /*
+ * I don't think we'll ever see a READ_12 but support it anyway
+ */
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_write_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_12) {
+ /*
+ * I don't think we'll ever see a WRITE_12 but support it anyway
+ */
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_write_data(us, info, block, blocks);
+ }
+
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
+
+ rc = usbat_flash_check_media(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ return usbat_check_status(us);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+static int init_usbat_cd(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_HP8200);
+}
+
+static int init_usbat_flash(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_FLASH);
+}
+
+static struct scsi_host_template usbat_host_template;
+
+static int usbat_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - usbat_usb_ids) + usbat_unusual_dev_list,
+ &usbat_host_template);
+ if (result)
+ return result;
+
+ /*
+ * The actual transport will be determined later by the
+ * initialization routine; this is just a placeholder.
+ */
+ us->transport_name = "Shuttle USBAT";
+ us->transport = usbat_flash_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 0;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver usbat_driver = {
+ .name = DRV_NAME,
+ .probe = usbat_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = usbat_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(usbat_driver, usbat_host_template, DRV_NAME);