ASR_BASE
Change-Id: Icf3719cc0afe3eeb3edc7fa80a2eb5199ca9dda1
diff --git a/marvell/linux/include/media/v4l2-common.h b/marvell/linux/include/media/v4l2-common.h
new file mode 100644
index 0000000..34aeba2
--- /dev/null
+++ b/marvell/linux/include/media/v4l2-common.h
@@ -0,0 +1,543 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ v4l2 common internal API header
+
+ This header contains internal shared ioctl definitions for use by the
+ internal low-level v4l2 drivers.
+ Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
+ define,
+
+ Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
+
+ */
+
+#ifndef V4L2_COMMON_H_
+#define V4L2_COMMON_H_
+
+#include <linux/time.h>
+#include <media/v4l2-dev.h>
+
+/* Common printk constructs for v4l-i2c drivers. These macros create a unique
+ prefix consisting of the driver name, the adapter number and the i2c
+ address. */
+#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
+ printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
+
+#define v4l_client_printk(level, client, fmt, arg...) \
+ v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \
+ (client)->addr, fmt , ## arg)
+
+#define v4l_err(client, fmt, arg...) \
+ v4l_client_printk(KERN_ERR, client, fmt , ## arg)
+
+#define v4l_warn(client, fmt, arg...) \
+ v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
+
+#define v4l_info(client, fmt, arg...) \
+ v4l_client_printk(KERN_INFO, client, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+ parameter called 'debug'. */
+#define v4l_dbg(level, debug, client, fmt, arg...) \
+ do { \
+ if (debug >= (level)) \
+ v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
+ } while (0)
+
+/* Add a version of v4l_dbg to be used on drivers using dev_foo() macros */
+#define dev_dbg_lvl(__dev, __level, __debug, __fmt, __arg...) \
+ do { \
+ if (__debug >= (__level)) \
+ dev_printk(KERN_DEBUG, __dev, __fmt, ##__arg); \
+ } while (0)
+
+/* ------------------------------------------------------------------------- */
+
+/* These printk constructs can be used with v4l2_device and v4l2_subdev */
+#define v4l2_printk(level, dev, fmt, arg...) \
+ printk(level "%s: " fmt, (dev)->name , ## arg)
+
+#define v4l2_err(dev, fmt, arg...) \
+ v4l2_printk(KERN_ERR, dev, fmt , ## arg)
+
+#define v4l2_warn(dev, fmt, arg...) \
+ v4l2_printk(KERN_WARNING, dev, fmt , ## arg)
+
+#define v4l2_info(dev, fmt, arg...) \
+ v4l2_printk(KERN_INFO, dev, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+ parameter called 'debug'. */
+#define v4l2_dbg(level, debug, dev, fmt, arg...) \
+ do { \
+ if (debug >= (level)) \
+ v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \
+ } while (0)
+
+/**
+ * v4l2_ctrl_query_fill- Fill in a struct v4l2_queryctrl
+ *
+ * @qctrl: pointer to the &struct v4l2_queryctrl to be filled
+ * @min: minimum value for the control
+ * @max: maximum value for the control
+ * @step: control step
+ * @def: default value for the control
+ *
+ * Fills the &struct v4l2_queryctrl fields for the query control.
+ *
+ * .. note::
+ *
+ * This function assumes that the @qctrl->id field is filled.
+ *
+ * Returns -EINVAL if the control is not known by the V4L2 core, 0 on success.
+ */
+
+int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl,
+ s32 min, s32 max, s32 step, s32 def);
+
+/* ------------------------------------------------------------------------- */
+
+struct v4l2_device;
+struct v4l2_subdev;
+struct v4l2_subdev_ops;
+
+/* I2C Helper functions */
+#include <linux/i2c.h>
+
+/**
+ * enum v4l2_i2c_tuner_type - specifies the range of tuner address that
+ * should be used when seeking for I2C devices.
+ *
+ * @ADDRS_RADIO: Radio tuner addresses.
+ * Represent the following I2C addresses:
+ * 0x10 (if compiled with tea5761 support)
+ * and 0x60.
+ * @ADDRS_DEMOD: Demod tuner addresses.
+ * Represent the following I2C addresses:
+ * 0x42, 0x43, 0x4a and 0x4b.
+ * @ADDRS_TV: TV tuner addresses.
+ * Represent the following I2C addresses:
+ * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62,
+ * 0x63 and 0x64.
+ * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this
+ * excludes addresses used by the demodulator
+ * from the list of candidates.
+ * Represent the following I2C addresses:
+ * 0x60, 0x61, 0x62, 0x63 and 0x64.
+ *
+ * NOTE: All I2C addresses above use the 7-bit notation.
+ */
+enum v4l2_i2c_tuner_type {
+ ADDRS_RADIO,
+ ADDRS_DEMOD,
+ ADDRS_TV,
+ ADDRS_TV_WITH_DEMOD,
+};
+
+#if defined(CONFIG_VIDEO_V4L2_I2C)
+
+/**
+ * v4l2_i2c_new_subdev - Load an i2c module and return an initialized
+ * &struct v4l2_subdev.
+ *
+ * @v4l2_dev: pointer to &struct v4l2_device
+ * @adapter: pointer to struct i2c_adapter
+ * @client_type: name of the chip that's on the adapter.
+ * @addr: I2C address. If zero, it will use @probe_addrs
+ * @probe_addrs: array with a list of address. The last entry at such
+ * array should be %I2C_CLIENT_END.
+ *
+ * returns a &struct v4l2_subdev pointer.
+ */
+struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter, const char *client_type,
+ u8 addr, const unsigned short *probe_addrs);
+
+/**
+ * v4l2_i2c_new_subdev_board - Load an i2c module and return an initialized
+ * &struct v4l2_subdev.
+ *
+ * @v4l2_dev: pointer to &struct v4l2_device
+ * @adapter: pointer to struct i2c_adapter
+ * @info: pointer to struct i2c_board_info used to replace the irq,
+ * platform_data and addr arguments.
+ * @probe_addrs: array with a list of address. The last entry at such
+ * array should be %I2C_CLIENT_END.
+ *
+ * returns a &struct v4l2_subdev pointer.
+ */
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs);
+
+/**
+ * v4l2_i2c_subdev_set_name - Set name for an I²C sub-device
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ * @client: pointer to struct i2c_client
+ * @devname: the name of the device; if NULL, the I²C device drivers's name
+ * will be used
+ * @postfix: sub-device specific string to put right after the I²C device name;
+ * may be NULL
+ */
+void v4l2_i2c_subdev_set_name(struct v4l2_subdev *sd, struct i2c_client *client,
+ const char *devname, const char *postfix);
+
+/**
+ * v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from
+ * an i2c_client struct.
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ * @client: pointer to struct i2c_client
+ * @ops: pointer to &struct v4l2_subdev_ops
+ */
+void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
+ const struct v4l2_subdev_ops *ops);
+
+/**
+ * v4l2_i2c_subdev_addr - returns i2c client address of &struct v4l2_subdev.
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ *
+ * Returns the address of an I2C sub-device
+ */
+unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
+
+/**
+ * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe.
+ *
+ * @type: type of the tuner to seek, as defined by
+ * &enum v4l2_i2c_tuner_type.
+ *
+ * NOTE: Use only if the tuner addresses are unknown.
+ */
+const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
+
+/**
+ * v4l2_i2c_subdev_unregister - Unregister a v4l2_subdev
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ */
+void v4l2_i2c_subdev_unregister(struct v4l2_subdev *sd);
+
+#else
+
+static inline struct v4l2_subdev *
+v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter, const char *client_type,
+ u8 addr, const unsigned short *probe_addrs)
+{
+ return NULL;
+}
+
+static inline struct v4l2_subdev *
+v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs)
+{
+ return NULL;
+}
+
+static inline void
+v4l2_i2c_subdev_set_name(struct v4l2_subdev *sd, struct i2c_client *client,
+ const char *devname, const char *postfix)
+{}
+
+static inline void
+v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
+ const struct v4l2_subdev_ops *ops)
+{}
+
+static inline unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd)
+{
+ return I2C_CLIENT_END;
+}
+
+static inline const unsigned short *
+v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type)
+{
+ return NULL;
+}
+
+static inline void v4l2_i2c_subdev_unregister(struct v4l2_subdev *sd)
+{}
+
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/* SPI Helper functions */
+
+#include <linux/spi/spi.h>
+
+#if defined(CONFIG_SPI)
+
+/**
+ * v4l2_spi_new_subdev - Load an spi module and return an initialized
+ * &struct v4l2_subdev.
+ *
+ *
+ * @v4l2_dev: pointer to &struct v4l2_device.
+ * @master: pointer to struct spi_master.
+ * @info: pointer to struct spi_board_info.
+ *
+ * returns a &struct v4l2_subdev pointer.
+ */
+struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+ struct spi_master *master, struct spi_board_info *info);
+
+/**
+ * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an
+ * spi_device struct.
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ * @spi: pointer to struct spi_device.
+ * @ops: pointer to &struct v4l2_subdev_ops
+ */
+void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+ const struct v4l2_subdev_ops *ops);
+
+/**
+ * v4l2_spi_subdev_unregister - Unregister a v4l2_subdev
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ */
+void v4l2_spi_subdev_unregister(struct v4l2_subdev *sd);
+
+#else
+
+static inline struct v4l2_subdev *
+v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+ struct spi_master *master, struct spi_board_info *info)
+{
+ return NULL;
+}
+
+static inline void
+v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+ const struct v4l2_subdev_ops *ops)
+{}
+
+static inline void v4l2_spi_subdev_unregister(struct v4l2_subdev *sd)
+{}
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * FIXME: these remaining ioctls/structs should be removed as well, but they
+ * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET).
+ * To remove these ioctls some more cleanup is needed in those modules.
+ *
+ * It doesn't make much sense on documenting them, as what we really want is
+ * to get rid of them.
+ */
+
+/* s_config */
+struct v4l2_priv_tun_config {
+ int tuner;
+ void *priv;
+};
+#define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config)
+
+#define VIDIOC_INT_RESET _IOW ('d', 102, u32)
+
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+
+/**
+ * v4l_bound_align_image - adjust video dimensions according to
+ * a given constraints.
+ *
+ * @width: pointer to width that will be adjusted if needed.
+ * @wmin: minimum width.
+ * @wmax: maximum width.
+ * @walign: least significant bit on width.
+ * @height: pointer to height that will be adjusted if needed.
+ * @hmin: minimum height.
+ * @hmax: maximum height.
+ * @halign: least significant bit on height.
+ * @salign: least significant bit for the image size (e. g.
+ * :math:`width * height`).
+ *
+ * Clip an image to have @width between @wmin and @wmax, and @height between
+ * @hmin and @hmax, inclusive.
+ *
+ * Additionally, the @width will be a multiple of :math:`2^{walign}`,
+ * the @height will be a multiple of :math:`2^{halign}`, and the overall
+ * size :math:`width * height` will be a multiple of :math:`2^{salign}`.
+ *
+ * .. note::
+ *
+ * #. The clipping rectangle may be shrunk or enlarged to fit the alignment
+ * constraints.
+ * #. @wmax must not be smaller than @wmin.
+ * #. @hmax must not be smaller than @hmin.
+ * #. The alignments must not be so high there are no possible image
+ * sizes within the allowed bounds.
+ * #. @wmin and @hmin must be at least 1 (don't use 0).
+ * #. For @walign, @halign and @salign, if you don't care about a certain
+ * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment
+ * is equivalent to no alignment.
+ * #. If you only want to adjust downward, specify a maximum that's the
+ * same as the initial value.
+ */
+void v4l_bound_align_image(unsigned int *width, unsigned int wmin,
+ unsigned int wmax, unsigned int walign,
+ unsigned int *height, unsigned int hmin,
+ unsigned int hmax, unsigned int halign,
+ unsigned int salign);
+
+/**
+ * v4l2_find_nearest_size - Find the nearest size among a discrete
+ * set of resolutions contained in an array of a driver specific struct.
+ *
+ * @array: a driver specific array of image sizes
+ * @array_size: the length of the driver specific array of image sizes
+ * @width_field: the name of the width field in the driver specific struct
+ * @height_field: the name of the height field in the driver specific struct
+ * @width: desired width.
+ * @height: desired height.
+ *
+ * Finds the closest resolution to minimize the width and height differences
+ * between what requested and the supported resolutions. The size of the width
+ * and height fields in the driver specific must equal to that of u32, i.e. four
+ * bytes.
+ *
+ * Returns the best match or NULL if the length of the array is zero.
+ */
+#define v4l2_find_nearest_size(array, array_size, width_field, height_field, \
+ width, height) \
+ ({ \
+ BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \
+ sizeof((array)->height_field) != sizeof(u32)); \
+ (typeof(&(array)[0]))__v4l2_find_nearest_size( \
+ (array), array_size, sizeof(*(array)), \
+ offsetof(typeof(*(array)), width_field), \
+ offsetof(typeof(*(array)), height_field), \
+ width, height); \
+ })
+const void *
+__v4l2_find_nearest_size(const void *array, size_t array_size,
+ size_t entry_size, size_t width_offset,
+ size_t height_offset, s32 width, s32 height);
+
+/**
+ * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by
+ * calling the g_frame_interval op of the given subdev. It only works
+ * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the
+ * function name.
+ *
+ * @vdev: the struct video_device pointer. Used to determine the device caps.
+ * @sd: the sub-device pointer.
+ * @a: the VIDIOC_G_PARM argument.
+ */
+int v4l2_g_parm_cap(struct video_device *vdev,
+ struct v4l2_subdev *sd, struct v4l2_streamparm *a);
+
+/**
+ * v4l2_s_parm_cap - helper routine for vidioc_s_parm to fill this in by
+ * calling the s_frame_interval op of the given subdev. It only works
+ * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the
+ * function name.
+ *
+ * @vdev: the struct video_device pointer. Used to determine the device caps.
+ * @sd: the sub-device pointer.
+ * @a: the VIDIOC_S_PARM argument.
+ */
+int v4l2_s_parm_cap(struct video_device *vdev,
+ struct v4l2_subdev *sd, struct v4l2_streamparm *a);
+
+/* Compare two v4l2_fract structs */
+#define V4L2_FRACT_COMPARE(a, OP, b) \
+ ((u64)(a).numerator * (b).denominator OP \
+ (u64)(b).numerator * (a).denominator)
+
+/* ------------------------------------------------------------------------- */
+
+/* Pixel format and FourCC helpers */
+
+/**
+ * enum v4l2_pixel_encoding - specifies the pixel encoding value
+ *
+ * @V4L2_PIXEL_ENC_UNKNOWN: Pixel encoding is unknown/un-initialized
+ * @V4L2_PIXEL_ENC_YUV: Pixel encoding is YUV
+ * @V4L2_PIXEL_ENC_RGB: Pixel encoding is RGB
+ * @V4L2_PIXEL_ENC_BAYER: Pixel encoding is Bayer
+ */
+enum v4l2_pixel_encoding {
+ V4L2_PIXEL_ENC_UNKNOWN = 0,
+ V4L2_PIXEL_ENC_YUV = 1,
+ V4L2_PIXEL_ENC_RGB = 2,
+ V4L2_PIXEL_ENC_BAYER = 3,
+};
+
+/**
+ * struct v4l2_format_info - information about a V4L2 format
+ * @format: 4CC format identifier (V4L2_PIX_FMT_*)
+ * @pixel_enc: Pixel encoding (see enum v4l2_pixel_encoding above)
+ * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4).
+ * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4).
+ * @bpp: Array of per-plane bytes per pixel
+ * @hdiv: Horizontal chroma subsampling factor
+ * @vdiv: Vertical chroma subsampling factor
+ * @block_w: Per-plane macroblock pixel width (optional)
+ * @block_h: Per-plane macroblock pixel height (optional)
+ */
+struct v4l2_format_info {
+ u32 format;
+ u8 pixel_enc;
+ u8 mem_planes;
+ u8 comp_planes;
+ u8 bpp[4];
+ u8 hdiv;
+ u8 vdiv;
+ u8 block_w[4];
+ u8 block_h[4];
+};
+
+static inline bool v4l2_is_format_rgb(const struct v4l2_format_info *f)
+{
+ return f && f->pixel_enc == V4L2_PIXEL_ENC_RGB;
+}
+
+static inline bool v4l2_is_format_yuv(const struct v4l2_format_info *f)
+{
+ return f && f->pixel_enc == V4L2_PIXEL_ENC_YUV;
+}
+
+static inline bool v4l2_is_format_bayer(const struct v4l2_format_info *f)
+{
+ return f && f->pixel_enc == V4L2_PIXEL_ENC_BAYER;
+}
+
+const struct v4l2_format_info *v4l2_format_info(u32 format);
+void v4l2_apply_frmsize_constraints(u32 *width, u32 *height,
+ const struct v4l2_frmsize_stepwise *frmsize);
+int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat,
+ u32 width, u32 height);
+int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat,
+ u32 width, u32 height);
+
+static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf)
+{
+ /*
+ * When the timestamp comes from 32-bit user space, there may be
+ * uninitialized data in tv_usec, so cast it to u32.
+ * Otherwise allow invalid input for backwards compatibility.
+ */
+ return buf->timestamp.tv_sec * NSEC_PER_SEC +
+ (u32)buf->timestamp.tv_usec * NSEC_PER_USEC;
+}
+
+static inline void v4l2_buffer_set_timestamp(struct v4l2_buffer *buf,
+ u64 timestamp)
+{
+ struct timespec64 ts = ns_to_timespec64(timestamp);
+
+ buf->timestamp.tv_sec = ts.tv_sec;
+ buf->timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+}
+
+#endif /* V4L2_COMMON_H_ */